U405 s2833 Microphone doesn't work after Windows 7 Upgrade

Hi all,
I had done the WIndows 7 Upgrade for my U405 S2833, everything is working fine but the microphone doesn't the drivers are installed and it appears at the device manager, msn, skype and some other IM programs but it just doesn't work, I had downloaded all drivers till date, but nothing seems to work, any idea?
Regards

Satellite L305-S5970
You may want to experiment with these drivers. The most recent is not necessarily the best fit.
   Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5859 - Released 07/13/09)
   Realtek Audio Driver for Windows 7 (32bit/64bit) (Version 6.0.1.5789 - Released 06/25/09)
-Jerry

Similar Messages

  • Satellite P300-1CE - Microphone doesn't work after Windows 7 installation

    Hi everyone.
    At the beginning I'm sorry for my bad english so I will say shortly.
    A few days ago I removed a few programs, and I installed the new operating system Windows 7. All over it I had to download new drivers of the camera, because they didn't work. After downloading drivers of the camera, the camera became operative (YEAH!), but later I worked out that for me a built-in microphone was out of order. What can be of it with cause and what driver to download and why microphone don't work?
    I can't speak with friends on skype ;( Help me. I hope you know what I say.

    Hello
    Did you really install all drivers after Windows 7 installation? Maybe you have forgotton something and so it doesnt work.
    Microphone is a part of webcam so make sure that webcam driver is installed properly and sound driver you need as well.
    After this check the sound settings. Make sure that Microphone is enabled and test it again with enabled microphone boost.

  • Satellite P300 - Microphone doesn't work after Windows 7 installation

    Hi,
    I recently did a clean install of Windows 7 on my Satellite P300. The built in microphone was fine with Vista but does not now work with Windows 7.
    I've tried going to the sound section and it does not list the built in mike - just the jacks. Can anyone help?
    Thanks
    James

    Hi
    Maybe you didnt install the driver for the microphone?! Therefore you have to install the webcam driver because the microphone is a part of it. You can get it here:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    After this it should be possible to use the internal microphone.
    By the way: Which application you use for the internal microphone? Skype or something else?

  • Portege M750 - Tablet doesn't work after Windows 7 upgrade

    Got an Windows 7 upgrade through Toshiba for my M750 tablet pc. Everything went smooth and seems to be working, except (!) the tablet functions. The pen is not recognized. Touch a little bit, but unpredictably.
    Please advise what I can do.
    Thanks

    Hi
    Are all devices recognized properly in device manager? Have you checked this?
    As far as I know you have to install or update the Dual Touch driver. This dirver is for the Digitizer and touch screen model. It enables the functionality that the Tablet PC Pen or finger can be used as a pointing device.
    You can download this driver on the Toshiba website.
    Check this!!

  • Microphone doesn't work after Windows clean install

    I have a satellite A135-S4677 (Part# PSAD0U-0N700P) which came with 32 bit vista.
    I recently did a 32 bit windows 7 clean install on a new hard drive. Everything works fine except the internal microphone which does not work. If I connect an external mic it works. Speakers work fine.
    I have tried the Toshiba Software Installer but it didnt help
    I have tried both drivers on toshiba's website for Realtek but it still doesnt work
    driver_audio_realtek_TC40053600B.exe
    driver_audio_realtek_TC40064600A.exe
    Anything else I can try. Please help
    Thank you.

    Satellite A135-S4677
    After a clean install, the order of loading first the Toshiba supplied hardware drivers and hardware utilities, then the Toshiba utilities and software is critical for success.
    1st Hardware Drivers & Hardware Utilities
    1) Chipset related
    2) Display
    3) Sound
    4) All other hardware drivers & hardware utilities
    2nd Toshiba Utilities & Toshiba Software
    1) Toshiba Value Added Package (TVAP)
    2) Toshiba Flash Card Utility (sometimes included in the TVAP)
    3) All other Toshiba utilities and Toshiba software
    Also, Toshiba laptops are very finicky about only using Toshiba supplied hardware drivers to work properly, and those drivers supplied by Windows Update and/or the chip makers. That's why I recommend disabling automatic Windows Updates. To do this, click 'Start - All Programs - Windows Update', on the menu at left click on 'Change settings', under 'Important updates' click on the drop down menu at right and choose 'Never check for updates (not recommended)', and click OK. Then only manually check for Windows Updates, check all available updates carefully, and never allow Windows Update to change any of your hardware drivers. Though you should still regularly check for updates.
    So, after disabling automatic Windows Updates, try downloading and installing these drivers in this order, and see if it resolves your mic problem.
    Intel Chipset SW Installation Utility for Windows 7 (32/64)
    Intel Display Driver for Windows 7 (32)(v8.15.10.1825)
    Realtek Audio Driver for Windows 7 (32/64)(v6.0.1.5904)
    Please let us know what happens. Good luck.
    Mike

  • Wireless doesn't work after windows 10 upgrade

    Today as most of the world, I upgraded my HP Pavilion dv6 6115-tx from Windows 7 to Windows 10. After the upgrade, the wireless doesn't seem to work. My PC seems to recognise the wireless adapter though.  The wireless adapter I have is Intel Centrino Wireless 1030.  What is the solution? Can I download another Wireless adapter?

    Please,  run the DirectX diagnostics tool. Go to Windows Start  and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post. Be aware that you will have to zip this file before attaching it here.

  • SD Card Reader Doesn't Work After Windows 10 Upgrade

    I recently upgraded my laptop to Windows 10 and since then am unable to download pictures to my laptop (something I need and do all the time).  My computer doesn't even recognize that I've put an SD card into it - no noise, no pop-ups, nothing.  I also tried to plug my camera directly into the computer and go that route, but it won't work that way either.  The SD card in the camera definitely has pictures on it, but it says the "folder is empty."  This is a function that I love, need, and greatly miss.  I did check to see if there were any software or driver updates available for my laptop on your support site, but Windows 10 isn't even an option in the operating system version drop-down...  Please help!

    Hi: I think most of the g6's have the Realtek card reader. Try the W10 card reader driver directly from Realtek.  First driver on the list... http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false

  • Satellite L500-20X - WLAN switch doesn't work after Windows 8 Upgrade

    Hello,
    I have updatet my Toshiba Satellite L500-20X to Windows 8.
    Unfortunately, since this update my WLAN Switch no longer works. All function keys work to F7, only F8 (WLAN switch) and F9 (touchpad) no longer work.
    What can I do?
    Thanks in advance.
    Kind regards
    Klaus

    Satellite L500 is not Win 8 upgrade supported so I think the problem is a missing driver or software
    As far as I know in order to use the FN buttons the Value Added Package for Win 8 needs to be installed.
    Check other driver area for Toshiba notebook series supporting the Win 8.
    Maybe you could use the VAP released for other series.

  • Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

    My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

    Hi
    The webcam is listed in device manager under the Imaging devices
    There you should see USB Video Device.
    If its not listed there, then I think that the device malfunctions or its disconnected.
    The webcam is an usb device and its connected to USB controller.
    I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
    I such case the display lid needs to be disassembled and the cables should be checked.
    In my opinion its a job for an technician.

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • Satellite A210 (PSAEG) - Microphone doesn't work on Windows 7 64bit

    Hello, the micro doesn't work under windows 7 64 bit, the driver I'm using is Windows Vsta 64 bit. The volume is set up maximun and so is the amplification but no way to make it work with skype or toshiba camera assistant software.
    Can anyone help me?
    thank you

    Hi Largo09,
    Usually you have to install the webcam and sound driver to get the microphone working. The microphone is a part of webcam
    As you wrote, Satellite A210 is not Windows 7 64bit supported so the only option you have are Vista 64bit drivers
    In my opinion you should check if Microphone is enabled in Windows sound settings. There you can also enable Microphone boost, that can increase the microphone volume.

  • Stand-by button on Cinema HD display doesn't work after Mountain Lion upgrade

    Hi,
    After I upgraded my Mac mini (spring '09) to Mountain Lion it appears that the buttons on the side of my Cinema HD display doesn't work. There is a setting in sys preferences that should put the Mac in stand-by when the power button is pressed. This doesn't work after I upgraded to OSX 10.8 Mountain Lion.
    Does anyone have similar experience. Anyway to fix it?
    Thanks,
    Henrik

    Have done some further investigating (to no avail).  The TV is displaying in my system Info as follows:
    Intel HD Graphics 3000:
      Chipset Model: Intel HD Graphics 3000
      Type: GPU
      Bus: Built-In
      VRAM (Total): 384 MB
      Vendor: Intel (0x8086)
      Device ID: 0x0116
      Revision ID: 0x0009
      Displays:
    Color LCD:
      Display Type: LCD
      Resolution: 1440 x 900
      Pixel Depth: 32-Bit Color (ARGB8888)
      Main Display: Yes
      Mirror: Off
      Online: Yes
      Built-In: Yes
      Connection Type: DisplayPort
    TOSHIBA-TV:
      Resolution: 1920 x 1080 @ 60 Hz
      Pixel Depth: 32-Bit Color (ARGB8888)
      Mirror: Off
      Online: Yes
      Rotation: Supported
      Television: Yes
    But nothing on the screen.
    Does anyone know if Apple have banned certain screens????

  • Adobe Reader doesn't work after windows 7 update

    Hello,
    My Adobe Reader X was working fine, until one night where Windows 7 automatically updated, and after that Adobe Reader doesn't work anymore. It doesn't respond AT ALL when I click on it, and I cannot view PDF files anymore.
    I uninstalled it, and re-installed it --- still doesn't work. I tried downloading version 9, but still it doesn't work.
    I also tried to do system restore, but somehow it won't let me --- it says it failed to do so.
    When I try to open PDF files in IE 10, it says "There is a problem with Adobe Acrobat/Reader..." and an error code of 103:103.
    Could anyone help me?
    Thanks!

    You can try running cleaner on your machine
    http://labs.adobe.com/downloads/acrobatcleaner.html
    and then again install latest Reader from
    http://get.adobe.com/reader/enterprise/

  • Internal Microphone doesn't work (after installing Boot Camp 3.1)

    I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
    I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
    On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
    I note that ear plug (connector in the back of the iMac) doesn't work too.
    Somebody can help me in this case ?
    Regards
    JGFilho

    i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
    The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

  • My microphone doesn't work after installing lion on iMac early 2009

    Hello,
    I've just installed LION and everthing seems to be OK except the microphone, it doesn't work on skype, imovie.
    I have an Imac early 2009.
    Will this bug be fixed in the next 10.7.1?
    Please if you can help me,
    Thanks

    If it suggests that you install iPhoto again, install iPhoto again. In your Macs Box that it came in there should be 2 Discs, one is an Applications CD (You need this one) And another is the Mac OS X.
    Insert your Applications CD and hold C while the computer is starting up, then you will be walked through the installation of Applications.

Maybe you are looking for

  • "An unknown error has occurred" when logging in to App Store

    Hi. I have a valid Apple ID and I have been running Mountain Lion from the day it was released. Starting today I can no longer log in to the App Store. I get "An unknown error has occurred". I have done the usual bits: checking ermissions, trashing p

  • I have uploaded a pdf-file. Where is the command to convert it to docx?

    I have uploaded a pdf-file. to https://files.acrobat.com/?trackingid=KGLHY#folder/0662976a-3059-4bd3-8f49-87041736f7c2. It appears in the list of files. Where is the command to convert it to docx?

  • Bcc: Is there any way to change the "undisclosed recipients" text ?

    Bcc: Is there any way to change the "undisclosed recipients" text appearing on the message at destination when I used Bcc?... Eudora offers the possibility to choose the text that appears when using Bcc. Does Mail do the same?... If yes, how?... Than

  • Want to change template for an application

    I made my first test application on oracle's provided platform. I chose the template with No tabs. Now I realize I need the tabs. I dont find a way to change the template assigned to an application. Is it really allowed or not ?? regards, raghav..

  • Bug in CR 12

    If you are using command object query to create a report in CR 12 and you are using aliases for field names, you will not see those aliases in the field explorer. You will only see the database fields. This only happens in CR 12. There is no such iss