U410 no sound, Win 7, new drivers, Conexant smartaudio not working properly

Hey there everybody,
I hope you guys will be able to help me. 
I just got my laptop back from repairs and now the following problem is presenting itself:
I don't get any sound from my internal speakers, when I plug in headphones, I can hear sound. The lever bar on the is moving and when I run a diagnostic programm, it doesn't find any fault with the speakers.
Here's what I did so far:
got my laptop back from repairs, went to listen to some songs on youtube when all of a sudden the sound stopped mid-video. Thought it was a problem with flash, so installed the new flash player. No change
I deinstalled and reinstalled all drivers, all to no avail.
Did a bios-update, no luck either.
actually did onekey recovery - nothing. 
The weird thing is, once in a while I'll get the start up sound and maybe sound for 1-2 mins (last night even 30!!!) and then it just stops. It doesn't make a cracking/buzzing sound when going out either, it just stops. 
Of course I've tried deleting the drivers and running with the built-in speakers that work with some microsoft drivers, also no difference. 
I've even tried disabling Intel Display Audio to see if there was a miscommunication between the two, but nothing. 
I also ran a diagnostic programm from Microsoft, it didn't really find anything but it did say it doesn't get any "jack information".  And I also noticed that the location is: Path 0...so I'm not sure, if that's got anything to do with it!
As you can see, I pretty much tried just about everything. Been reading every community entry with a somewhat similiar problem I could find, still nothing. 
I'm super desperate right now...please help!!!

Thanks. I have rolled back to .4.2_07. and that works. Also have set the update option to no updates (Cntrol Panel -- Java Plug in). However, every day I lose the sound even though no new Java update has been installed. strange.
If I restore my system back to the older day it works. I do have the older runtime .4.2_05, .4.2_06 too.
Is there any other location I need to set the updates off? Or any other driver conflict that is going on?
Why is everyone not having this issue?
Message Edited by mmkedia on 09-0-2005 06:58 PM

Similar Messages

  • Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

    Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

    A couple of other things you can try -
    With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
    - Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
    - In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
    - Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
    - Delete and re pair your iPhone from your Toyota system
    Hope something here helps. Thanks

  • New laptop - beats audio not working properly

    Product name:HP  Envy dv7t-7300 Quad Edition
    OS: Windoze 8
    Issue:  This is a brand new notebook.  We were using Skype video and the sound volume was very poor (very low).  So we decided to plug in the USB-powered speakers we have used on a Dell laptop for hte last year.  There was no sound.  We unplugged the speakers and there was no sound from the notebook.  On a whim, Iplugged the speakers back in and out and suddenly the enhanced (beats) audio started to work, but we could not control the voilume (the volume bar showed 0% but the sound was extremely loud.  I played a youtubs video and the sound was still loud.  I played a system sound from the control panel and the sound was extreme;y loud..  I plugged the speakers back in and there was again no sound.  I unplugged them and again there was no sound.
    No sound.  I have rebooted twice and still no sound.  Windoze 8 shows everything working fine.  It apperas that ther is a hardware mechaniscal issue in the headphone plug.  Also, when watching the sound controls on Windoze 8, Control Panel -> Hardware and Sound -> Sound, there are currently three sound devices onthe Volume Mixer display:  S235HL, System Sounds, and HPConnectRe.....    When I plug in the speaker mini-plug, the S235HL panel disappears.  When I unplug the mini plug, the S235HL display momentarily (1/4 second) appears and then disappears.  When I do it a third time, I get a pull down on the System Sounds which allows me to make the S23HL display appear again.
    I'm pretty sure that there is supposed to be some way to control the volumn on the beats audio, and I'm pretty sure that the headp[hones jack is supposed to work properly like it has on my presios 5 or 6 laptops.  Is this a mechanical issue?  Or are we doing something wrong?

    Hello nancyes.  I understand you're having trouble with your sound.
    Have you tried uninstalling the device's drivers and allowing Windows to reinstall them?  Try the following.
    From either the Metro or Desktop views press the Windows+X key combination.  This opens the Context Menu.
    Select Device Manager.
    Expand the "Sound, video, and game controllers" section.
    Right click on your audio device and select "Uninstall."
    Now reboot your PC.
    Windows will automatically install the device when it loads.
    Verify whether the problem persists.
    I'll keep an eye out for your response.  I hope you have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • Brand new ipod touch screen not working properly

    My sons brand new ipod touch 32gb (well bought april 14) only occasionally will respond to the touch sceen, and when he does get into it the next screens dont work properly. Any suggestions?

    Try #2 and 3 in link below. If neither help, it's most likely a hardware issue then. Contact Apple and get it serviced.
    Basic troubleshooting steps. 
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • My Open 'New Document' function is not working properly on Illustrator CS5

    When I open a 'New Document' a message pops up saying 'Print.ai' is not working, I wanted to open a custom 'New Document Profile' not print.  The custom option is grayed out and I cannot select it.  What do I do?

    If you can create a new document by any means, then set up the document the way you want the preset to be, and save the file here:
    ~/Library/Application Support/Adobe/Adobe Illustrator CS5/en_US/New Document Profiles
    You might need to delete/replace the faulty Print.ai file.

  • SoundBlaster X-Fi drivers corrupt or not working "properly" without Internet access. Please fix!

    The latest drivers located here are corrupt. It is a single exe file that does a CRC check before install begins. During this self check, it fails and stops extracting the files. As such I can not install the drivers. Now, I can probably even tell you why this happens. First I will start by saying that the install only fails on a system with no Internet access. Why so? Because if it has internet access, it updates/checks the digital certificate online. This is not good or acceptable for me as I install the drivers on offline systems and also even on my main Windows 7 setup, I multi-boot and have Windows XP on it too. When I initially install everything the first time, I do not start by first allowing internet access. No sir. That comes last. The first two things after the motherboard chipset drivers are the audio and GPU drivers. Then, a few other important things and then my security suite and then, finally, internet access. That's just normal.
    Since this only happens to the driver file that supports Windows 8 (and all previous versions of Windows) and not the Windows 7 (and all previous versions of Windows) file, it's an issue that should be fixable. You may think it's not worth fixing, but I assume that this will truly be the last driver for the X-Fi card, and as such, can we please end it's life cycle with a driver that works on any O/S that it still supports?
    Notes:
    This issue only happens with the Windows 8 (latest) drivers. This does not happen with the previous (or any before) drivers. So this tells me it's an issue that could be resolved. Please check the digital signature settings on the Windows 8 drivers. Again, all other drivers work just fine on Windows XP with no internet. This issue only exists for the Windows 8 driver executable.
    The driver file is not altered or corrupt. The digital signature only fails if it can not access the Internet, or perhaps a newer Windows that has updated root certificates. (ie: Win7)
    Pictorial situation:

    Don't you care Creative? Don't you care? /use Peter Griffin voice when reading.

  • New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

    Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
    https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
    Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
    point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

    I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it.  I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything. 
    When you say you can't reach OWA is that internally or externally?  As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
    with  Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
    Server. )
    Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
    https://mail.theirdomainhere.tld
    Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server. 

  • New aluminum bluetooth keyboard not working properly

    Got the new aluminum keyboard and paired it with my MacBook Pro and everything went swimmingly. Love the key feel and the compact size. Updated the software to 1.2 and now I get the following behavior:
    - The keyboard pairs up fine, and the battery level shows up
    - The tab, arrow keys, delete, and tab all work fine
    - No other keys work
    I've tried restarting the MacBook Pro, and that solves the problem for a couple of minutes, but then the keys become non-functional again. Anybody have any idea what might be happening?
    Tim

    It appears that the problem was that I had Mouse Keys turned on in the Universal Access preferences. Turning that off allows me to use all keys now. Odd, as I've never made any changes to that preference pane. If the default is to have that turned on, perhaps Apple should make it clear that it must be turned off.

  • HELP! My new muse site is not working properly?

    Did I make a mistake when I used a muse theme? My last site worked a treat. This one is not working at ALL
    www.gsvalves.co.uk
    None of the clever widgets are working, such as the homepage slide show and the documents tabbed selector on the catalogues page.
    None of the full width headers or footers are working either.
    Why? And really HELP!
    I have re output, re uploaded entire site already. It works in BizCatalyst, but I can't use that as customer already has own hosting. It works in preview, and only comes a-cropper when I upload using filezilla. The in built FTP doesn't want to work with this hosting. I don't know why.

    Thanks Zak. They had replied thus (before your response)
    Looking at IIS I can see all of the files in the list below so it appears to have uploaded correctly.  Are your
    scripts Java scripts with .js extensions?  If so then I am wondering if this may help you -
    http://forums.iis.net/t/1069630.aspx?IIS+not+running+Embedded+Java+Scripts.
    But this does not help me obvs, as the point of using Muse is that I do not have the expertise to go in and hand hack the code. Otherwise I probably wouldn't be using Muse right?
    So, I have sent this screenshot and asked them to please adjust the permissions to work. Unless this answer makes more sense to you than me...

  • Crazy Mighty Mouse! its brand new, but it's not working properly!?

    I bought a Mac Pro last summer, amazing machine. However, the mouse! Not so good. Since the beginning the mouse has been acting weird. For instance, when I move the mouse, the cursor jumps to another direct. Sometimes, it moves opposite to where I am moving the mouse! Bottom line, the mouse is possessed!
    - I thought it’s a software problem. I did a recover… the problem persists.
    - I used the mighty mouse on another computer… the problem persists.
    - I tried using it with and without a mouse pad… the problem persists.
    So I bought a cheap $10 mouse! And used it on my Mac… it works fine!
    Conclusion >>> Mighty Mouse doesn’t got some kind of problem.
    Time passed, about 2 month, and I am still using the cheap mouse I bought, but I would like go back to the mighty mouse. What can I do? What are my options? Should I send it to apple? How? Etc..
    Thanx for the help

    I've found that if I used a shiny, reflective mouse pad with a shiny reflective white stripe on it my pointer jumps all over the place when it crosses the white reflective stripe. I also have a cloth top mouse pad with non-reflective white printing and it works OK there.
    Got this from an IBM support site:
    Test the optical mouse without using a mouse pad. When using an optical mouse with a mouse pad you may experience poor tracking or responsiveness. Due to the nature of optical mice, you should avoid mouse pads that are very glossy or highly reflective because they may cause poor tracking. You should also avoid very dark mouse pads. If you are not sure if your mouse pad is causing tracking issues, try a plain piece of white paper to see if the optical tracks better. If so, then the mouse pad you are using may be the problem. Experiment if possible. Light colors like white, tan, or gray that have a flat, non-reflective finish work best. The optical mouse takes microscopic snapshots of the working surface at a rate of more than 1,000 images per second. If the mouse is moved, the image changes. The tiniest irregularities in the surface can produce images well enough for the sensor and DSP to generate usable movement data. The best surfaces reflect but scatter light; an example is a blank sheet of white drawing paper. Some surfaces do not allow the sensor and DSP to function properly because the irregularities are too small to be detected. An example of a poor optical-mousing surface is unfrosted glass.

  • Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro.  There is sound but only empty space where the video should be.  Help?

    Videos (eg, YouTube, New York Times) do not work on my Retina Display MacBook Pro.  There is sound but only empty space where the video should be.  Help?

    Did you install Flash Player?
    http://get.adobe.com/flashplayer/

  • The head phone jack on my brand new iPod touch 5th generation is not working properly

    The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar

  • My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

    My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
    I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

    Reset Firefox to its default state
    If you're having major problems which you can't resolve, start fresh with only your essential information.
    Troubleshooting Information
    This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
    Application Basics
    Name Firefox
    Version 33.0.1
    Update History
    User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
    Profile Folder
    Enabled Plugins about:plugins
    Build Configuration about:buildconfig
    Memory Use about:memory
    Multiprocess Windows 0/1
    Crash Reports for the Last 3 Days
    Report ID Submitted
    All Crash Reports
    Extensions
    Name Version Enabled ID
    Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
    Adblock Plus Pop-up Addon 0.9.2 true [email protected]
    Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
    Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
    Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
    Graphics
    Adapter Description Intel(R) HD Graphics
    Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
    Adapter RAM Unknown
    Device ID 0x0046
    Direct2D Enabled true
    DirectWrite Enabled true (6.2.9200.16571)
    Driver Date 1-30-2013
    Driver Version 8.15.10.2993
    GPU #2 Active false
    GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
    Vendor ID 0x8086
    WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
    windowLayerManagerRemote true
    AzureCanvasBackend direct2d
    AzureContentBackend direct2d
    AzureFallbackCanvasBackend cairo
    AzureSkiaAccelerated 0
    Important Modified Preferences
    Name Value accessibility.blockautorefresh true
    accessibility.typeaheadfind.flashBar 0
    browser.cache.disk.capacity 358400
    browser.cache.disk.smart_size_cached_value 358400
    browser.cache.disk.smart_size.first_run false
    browser.cache.disk.smart_size.use_old_max false
    browser.cache.frecency_experiment 1
    browser.places.smartBookmarksVersion 7
    browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
    browser.startup.homepage www.google.com
    browser.startup.homepage_override.buildID 20141023194920
    browser.startup.homepage_override.mstone 33.0.1
    browser.tabs.loadInBackground false
    dom.mozApps.used true
    extensions.lastAppVersion 33.0.1
    font.internaluseonly.changed true
    gfx.direct3d.last_used_feature_level_idx 1
    keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
    media.gmp-gmpopenh264.lastUpdate 1413750166
    media.gmp-gmpopenh264.version 1.1
    media.gmp-manager.lastCheck 1414375733
    network.cookie.prefsMigrated true
    places.database.lastMaintenance 1414404204
    places.history.expiration.transient_current_max_pages 102059
    plugin.disable_full_page_plugin_for_types application/pdf
    plugin.importedState true
    plugin.state.npmedia 0
    plugin.state.nptimegrid 1
    print.printer_Canon_MG2100_series_Printer.print_bgcolor false
    print.printer_Canon_MG2100_series_Printer.print_bgimages false
    print.printer_Canon_MG2100_series_Printer.print_colorspace
    print.printer_Canon_MG2100_series_Printer.print_command
    print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
    print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
    print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_edge_left 0
    print.printer_Canon_MG2100_series_Printer.print_edge_right 0
    print.printer_Canon_MG2100_series_Printer.print_edge_top 0
    print.printer_Canon_MG2100_series_Printer.print_evenpages true
    print.printer_Canon_MG2100_series_Printer.print_footercenter
    print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
    print.printer_Canon_MG2100_series_Printer.print_footerright &D
    print.printer_Canon_MG2100_series_Printer.print_headercenter
    print.printer_Canon_MG2100_series_Printer.print_headerleft &T
    print.printer_Canon_MG2100_series_Printer.print_headerright &U
    print.printer_Canon_MG2100_series_Printer.print_in_color true
    print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
    print.printer_Canon_MG2100_series_Printer.print_oddpages true
    print.printer_Canon_MG2100_series_Printer.print_orientation 0
    print.printer_Canon_MG2100_series_Printer.print_page_delay 50
    print.printer_Canon_MG2100_series_Printer.print_paper_data 1
    print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
    print.printer_Canon_MG2100_series_Printer.print_paper_name
    print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
    print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
    print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
    print.printer_Canon_MG2100_series_Printer.print_plex_name
    print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
    print.printer_Canon_MG2100_series_Printer.print_resolution_name
    print.printer_Canon_MG2100_series_Printer.print_reversed false
    print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
    print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
    print.printer_Canon_MG2100_series_Printer.print_to_file false
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
    privacy.sanitize.migrateFx3Prefs true
    privacy.sanitize.timeSpan 2
    storage.vacuum.last.index 1
    storage.vacuum.last.places.sqlite 1412311800
    Important Locked Preferences
    Name Value
    JavaScript
    Incremental GC true
    Accessibility
    Activated false
    Prevent Accessibility 0
    Library Versions
    Expected minimum version Version in use
    NSPR 4.10.7 4.10.7
    NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSUTIL 3.17.1 3.17.1
    Experimental Features
    Name ID Description Active End Date Homepage

  • Help, web cam is not working properly with win vista

    Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
    lenovo easy capture 2.5...so if u cud suggest me anything...
    Moderator note; subject edited

    re-install drivers and try again. ( also easy capture )

  • Sound is not working properly

    Dear Team,
    Would you please provide me a solution To my problem.
    My Right Speaker on HP PAVILION G4 notebook is not working properly. Its sound is craking.
    Regards,
    John

    Hello, 
    I see that both of you guys are having the same exact issue. Yes, usually updating the BIOS and audio drivers fixes this issue. 
    This seems to be a driver issue going on with the audio and just simply updating the drivers should more than likely fix the issue.
    Now, before we get going could both of you please give me the full model name and number of the notebook you have. 
    Once I receive that information, I will send you a link to install the BIOS and Audio drivers. 
    If you have any more questions please let me know. 
    THX

Maybe you are looking for