U410: Not able to Start Windows 8 when booting

Hello,
When I start my Lenovo U410 the Lenovo sign and the loading circle appears like under normal conditions.
But then, when the sign disappears, nothing is happening.
Windows won't start and I only habe the light up screen with nothing on ist, turning off after several seconds.
Can anyone help me with this Problem?
Regards

as an Addition to what Shiv_k said
You can also try this approach by neokenchi.
Spoiler (Highlight to read)
try to Interrupt the loading of Windows 8 to enter push-button reset mode (this is like a recovery environment to restore the pc fromr previous working state). To do this, hold the power button while Windows 8 is loading up (you need to do this twice). If successful, you'll see this screen:
Click on Troubleshoot and from here, you can:
4a. boot into Safe Mode, If everything's ok, try to restart the computer in normal mode and observe
4b. do a System Restore to undo the changes
try to Interrupt the loading of Windows 8 to enter push-button reset mode (this is like a recovery environment to restore the pc fromr previous working state). To do this, hold the power button while Windows 8 is loading up (you need to do this twice). If successful, you'll see this screen:
Click on Troubleshoot and from here, you can:
4a. boot into Safe Mode, If everything's ok, try to restart the computer in normal mode and observe
4b. do a System Restore to undo the changes
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Not able to start i-tunes when my i-pod is plugged in ..

When I plug in my i-pod in the USB 2.0 port windows displays a dialog box (whether I do this before or after the computer is turned on):
Windows - No disk
There is no disk. Please insert disk.
When this box appears i-tunes can't start - and hence I cannot connect to the i-pod. (And if i-tunes was started before the i-pod was plugged in, the programme freezes).
I just got a new computer, the recent versions of i-tunes and i-pod software are installed.
I have absolute no clue what to do. I've tried to reinstall i-tunes, but this didn't help.
Any suggestions?
Regards, ettutu
Pentium Dual Core 3 GHz Windows XP

hmmmmmm. it's plausible that you might be getting a weird version of this issue:
Windows confuses iPod with network drive and may keep iPod from mounting or songs may seem to disappear
(let's at least try to get the possibility off the table.)

HT201210 I am not able to start my iPod. In itunes when I try to restore my ipod it throws an Error 1601..please help!

my ipod stopped working and I am not able to start it. When I connect it to my computer and start itunes, it ask me to restore the device but that too gives an error (1601). I have tried the recommended soln but that didnt help.
What should I do?

Hello Ephremekka
Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
-Norm G.

I am not able to start mac system in Mac mode which has windows 7 installed , My system starts only in Windows mode

I want to switch between Mac and Windows 7 Operating System. I am only able to start Windows. Please Help

If you reboot and hold the Alt key down after you hear the chime is the Macintosh HD shown as a boot option?

Not able to start Integrated Weblogic server

Hi All,
I have installed Jdeveloper & Weblogic server in my system. I am able to deploy my SOA peojects in em console. But when i try to run a JSF project , it is throwing an error message like not able to start Integrated Weblogic Server. And Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt. I dont have my middleware in D:\OracleOSB\Middleware, But i have created the Middleware home in D:\Oracle\Middleware.
I reinstalled SOA sutie, Jdeveloper & Weblogic server but stilll then i am getting the same error when i try to start Integrated Weblogic server. Please find below the error message:
*** Using port 7101 ***
C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
The system cannot find the path specified.
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=D:\OracleOSB\Middleware\wlserver_10.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar;D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrf.jar;D:\OracleOSB\Middleware\wlserver_10.3\server\lib\xqrl.jar
PATH=D:\OracleXE\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_17"
Java(TM) SE Runtime Environment (build 1.6.0_17-b04)
Oracle JRockit(R) (build R28.0.0-679-130297-1.6.0_17-20100312-2123-windows-ia32, compiled mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JROCKI~1.0-6\bin\java -Xms256m -Xmx512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\OracleOSB\Middleware\wlserver_10.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -da -Dplatform.home=D:\OracleOSB\Middleware\wlserver_10.3 -Dwls.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Dweblogic.home=D:\OracleOSB\Middleware\wlserver_10.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=D:\OracleOSB\Middleware\oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\OracleOSB\Middleware\oracle_common\modules\oracle.ossoiap_11.1.1,D:\OracleOSB\Middleware\oracle_common\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\249103\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= weblogic.Server
[WARN ] Use of -Djrockit.optfile is deprecated and discouraged.
[ERROR][cgdir ] Could not read old style optfile from D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt: Could not open D:\OracleOSB\Middleware\oracle_common\modules\oracle.jrf_11.1.1\jrocket_optfile.txt
Exception in thread "Main Thread" java.lang.NoClassDefFoundError: weblogic/Server
Caused by: java.lang.ClassNotFoundException: weblogic.Server
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:303)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: weblogic.Server. Program will exit.
Process exited.
Can anyone help me to overcome this issue.
thanks in advance.

Try checking the "C:\Users\249103\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\bin\startWebLogic.cmd" startup file. It seems containing old references to D:\OracleOSB instead of D:\Oracle ...

Not able to start PIA

hi gurus, i am not able to start my PIA. i am able to boot the app server successfully but i think there is some issue with the webserver. this is the URL of my PIA http://DELL-PC:80/psp/CPDMO/?cmd=login
when i am trying to open the link to check websever (http://DELL-PC), it does not work. plus i am also not sure whether the port number 80 is correct. would you please also suggest me where all i can get this port number to verify?
the below is the cmd text of webserver boot -
Attempting to start WebLogic Server 'PIA'
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.2-20_o-108500-1.6.0_05-20090120-1116-windows-ia32, compiled mode)
java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Djava.util
.logging.config.file=D:\CPDMO_~1\webserv\CPDMO\applications\peoplesoft\logging.properties -Dorg.apache.commons.logging.Log=org.apache.c
ommons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=D:\CPDMO_~1\webserv\CPDMO\psvault -Djavax.net.ssl.trustStore=D:/CPDMO_P
SHOME\webserv\CPDMO\keystore\pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=D:\WEBLOG~1\WLSERV~1.3\server\lib\weblo
gic.policy -Dssl.debug=false -Dps_home=D:/CPDMO_PSHOME weblogic.Server
<Jul 30, 2012 12:49:32 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the
classpath:
D:\CPDMO_PSHOME\webserv\CPDMO\lib\pluto-1.0.1.jar;D:\CPDMO_PSHOME\webserv\CPDMO\lib\portlet-api-1.0.jar;D:\CPDMO_PSHOME\webserv\CPDMO\l
ib\ps_patch.jar>
<Jul 30, 2012 12:49:35 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-
108500-1.6.0_05-20090120-1116-windows-ia32 from BEA Systems, Inc.>
<Jul 30, 2012 12:49:36 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 122738
5 >
<Jul 30, 2012 12:49:36 PM IST> <Warning> <Management> <BEA-141274> <Production mode has specified at the command line via the weblogic.
ProductionModeEnabled system property. This system property overrides the development mode setting contained in config.xml. However, th
e console and WLST show the attribute values and defaults that correspond to the development mode specified in config.xml.>
<Jul 30, 2012 12:49:38 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 30, 2012 12:49:38 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 30, 2012 12:49:39 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\CPDMO_PSHOME\webserv\CPDMO\servers\PIA\lo
gs\PIA_weblogic.log is opened. All server side log events will be written to this file.>
<Jul 30, 2012 12:49:45 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 30, 2012 12:49:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 30, 2012 12:49:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 30, 2012 12:50:28 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 30, 2012 12:50:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alia
s DemoIdentity from the jks keystore file D:\WEBLOG~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\WEBLOG~1\WL
SERV~1.3\server\lib\DemoTrust.jks.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\WEBLOG~1\JR
OCKI~1.2-2\jre\lib\security\cacerts.>
<Jul 30, 2012 12:50:31 PM IST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
Version: V3
Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 512 bits
modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484
772458983977898996276815440753
public exponent: 65537
Validity: [From: Fri Mar 22 01:42:27 IST 2002,
To: Wed Mar 23 01:42:27 IST 2022]
Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
SerialNumber: [ 33f10648 fcde0deb 4199921f d64537f4]
Certificate Extensions: 1
[1]: ObjectId: 2.5.29.15 Criticality=true
KeyUsage [
Key_CertSign
Algorithm: [MD5withRSA]
Signature:
0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:9089:6007:aac:
55bb:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:286d:3e9e:f19d:7779:
8010 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:9d38:953c:286d:3e9e:f19d:77
79:8010 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:286d:3e9e:f19d
:7779:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Warning> <Server> <BEA-002611> <Hostname "DELL-PC", maps to multiple IP addresses: 14.98.136.134, fe80:
0:0:0:286d:3e9e:f19d:7779%15, 2002:e62:8886:0:0:0:e62:8886, 2001:0:9d38:953c:286d:3e9e:f19d:7779>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:443 for p
rotocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[8]" is now listening on 127.0.0.1:443 for protoco
ls iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:7028:bf6f:a932:b82:8
010 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:8010 for protoc
ols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on 127.0.0.1:8010 for protocols ii
op, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 2002:e62:8886:0:0:0:e62:8
886:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 14.98.136.134:8010 for protocol
s iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:200:5efe:e62:8
886:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 2002:e62:8886:0:0:0:e62:8886:80
10 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:200:5efe:e62:8886:80
10 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 14.98.136.134:443 for pro
tocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 2001:0:9d38:953c:286d:3e9e:f
19d:7779:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:9089:6007:aac:55bb:8
010 for protocols iiop, t3, ldap, snmp, http.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on fe80:0:0:0:7028:bf6f:a932
:b82:443 for protocols iiops, t3s, ldaps, https.>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "PIA" for domain "CPDMO" running i
n Production Mode>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Jul 30, 2012 12:50:33 PM IST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messa
ges to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
Edited by: hick on Jul 30, 2012 12:59 PM

looks like your configured pia to run on port 8010
>
<Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on 127.0.0.1:8010 for protocols ii
op, t3, ldap, snmp, http.>
>
Try following url:
http://DELL-PC:8010/psp/CPDMO/?cmd=login

Not able to start the NW04 CI instance.

Hi All,
I installed NW04 JAVA with EP 6.0 on Windows 2003 SP1 with MS SQL. I configured SCS and CI to run on Virtual hosts SAPENQ01 and SAPJ2EE respectively for HA. I have two node cluster. When I start CI and SCS on same host they started just fine and everything is working. I switched the SCS instance group to second node and tried to start the CI instnce on first node. The CI is not able to start.
I tried starting CI manually also ... bust it just gives message on command line saying "STARTSAP continues ... ". No logs are created. It never starts jcontrol.exe process. And also when I see SAP MMC ... it is not showing SAP instances there.
Any help is greatly appreciated.
TIA,
cvr/

Hi,
Did you adjust the profile files of the Web AS so that they use the virtual host names (wherever host names are used), not the real host names. For example, if the host name of the message server in the profile is the real hostname of the machine, after the switchover connection to message server would not be possible.
In addition, you would also have to check the DB connection settings (through the config tool) and make sure the virtual hostnames are used there too.
Hope that helps.
P.S. the logs of the startsap are generated in the \usr\sap\<SID>\SCS<nr>\work\sapstart.log.

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Not able to start localagent

Hi All,
I am working on ODI 11g (11.1.1.5), and have created master and work repostiories on my laptop successfully.
After follwoing instruction to update odiparam file with the password created using encode cammand, and specifying all the other paramaeters appropriately as per the instcutions to install the localagent, when I execute follwoing command from command promt;
agent -NAME=localagent
I get follwoing errors and hence the localagent could not be started;
Pasting part of the error log thrown after the above command was executed;
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin>agent -NAME=localagent
OracleDI: Starting Agent ...
2012-03-26 15:15:00.281 ERROR ODI-1131 Agent localagent encountered an error: OD
I-1400: Agent localagent start failure: JDBC connection error occurs while conne
cting to the master repository. Caused by: ODI-1441: Unable to connect to the ma
ster repository at JBDC URL=jdbc:oracle:thin:@localhost:1521:orcl with USER=snpm
1.
ODI-1441: Unable to connect to the master repository at JBDC URL=jdbc:oracle:thi
n:@localhost:1521:orcl with USER=snpm1.
Caused By: java.sql.SQLException: Exception occurred while getting connection: o
racle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasourc
e: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:
488)
at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.jav
a:163)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
ava:911)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
ava:857)
at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
ava:851)
at oracle.odi.Agent.validateConnectionProperties(Agent.java:411)
at oracle.odi.Agent.doGetDataSource(Agent.java:403)
at oracle.odi.Agent.main(Agent.java:484)
Caused by: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection fr
om Datasource: java.sql.SQLException: ORA-01017: invalid username/password; logo
n denied
Please let me know what is the issue, as I am following all the instrcutuions and still not able to start the agent.
Below is the environment of my laptop
OS - Windows XP processional edition
oracle 11g
ODI 11g
Would appreciate help to resolve this error, since I am not able to go ahead and create projects, scenarios, ... and so on...
Thanks in advance.
Santosh

set ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
set ODI_MASTER_URL=jdbc:oracle:thin:@localhost:1521:orcl
set ODI_MASTER_USER=snpm1
set ODI_MASTER_ENCODED_PASS=hpfXp4IuUHo28R1kj4qXVbGhS
set ODI_SECU_WORK_REP=WORKREP_PR2-1
set ODI_JAVA_HOME=C:\oracle\product\11.1.1\Oracle_ODI_1\jrockit-jdk1.6.0_24
Above parameters I changed.
snpm1 is a oracle schame for master repository
'hpfXp4IuUHo28R1kj4qXVbGhS' is a string created by 'encode oracle1' command executed at command prompt
WORKREP_PR2-1 is work repository name
C:\oracle\product\11.1.1\Oracle_ODI_1\jrockit-jdk1.6.0_24 is path for java home as per my local odi installation..
I am able to connect to snpm1 schema in oracle, so why is the local agent getting issue, is there any problem withe the driver specified?
When I tried to connect localagent whcih I defined in physical architecture, by pressing Test Connection buttion, it gave following error.
oracle.odi.runtime.agent.invocation.InvocationException: ODI-1424: Agent host or port cannot be reached using http://localhost:20910/oraclediagent.
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.reThrowAgentErrorAsInvocation(RemoteRuntimeAgentInvoker.java:1064)
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:272)
     at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invokeIsAlive(RemoteRuntimeAgentInvoker.java:409)
     at oracle.odi.ui.action.SnpsPopupActionTestAgentHandler.actionPerformed(SnpsPopupActionTestAgentHandler.java:67)
     at com.sunopsis.graphical.frame.edit.EditFrameSnpAgent.jButtonTestAgent_ActionPerformed(EditFrameSnpAgent.java:990)
Thanks and Regards
Santosh
Edited by: 910192 on Mar 26, 2012 4:22 AM
Edited by: 910192 on Mar 26, 2012 4:24 AM

Not able to generate AS2 MDN when receiving custom XML via AS2

Hi friends,
I have setup the trading partner and the corresponding TP certificate import for receiving the custom XML via AS2 channel.
I am receiving the custom xml properly to oracle b2b and able to receive the same to bpel as well. however in the oracle b2b console under reports tab i am seeing only one record for inbound document receive and i am not seeing the other record for the AS2 MDN going back to vendor. I have setup the AS2 channel under the external trading partner --> Channel using the vendor AS2 URL and selected all the security parameters while creating the Outbound AS2 channel.
1. Not able to generate AS2 MDN when receiving custom XML via AS2.
2. eventhough i am able to decrypt the inbound custom XML and ablr to recieve it in bpel also for processing, in the reports tab the inbound message state is changing to MSG_ERROR and it has the folloing error message:
Error Code
B2B-50037
Error Description
Machine Info: (***********) Description: B2B inbound message processing error
Error Level
ERROR_LEVEL_COLLABORATION
for AS2 MDN generation for custom XML receiving using As2 protocol, do we need to setup anything other than the outbound As2 Channel using the external vendor AS2 URL?
Can you please help me how can i generate the AS2 MDN for the inbound custom XML document i have received and also why the inbound message is failing even though i am receiving the custom XML properly to bpel?
Thanks,
Amirineni.

Hi Prasanna,
Vendor has enabled the ACK mode as SYNC.
Below are the headers for the inbound message to B2B. and we are able to receive the input message to bpel also.
Protocol Transport Binding
ChannelName=******** AS2-To=****AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=****** Recipient-Address=https://******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=****** Content-Disposition=attachment; filename="smime.p7m" Host=****** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=****** Mime-Version=1.0
Message Digest
Message Digest
Digest Algorithm
sha1
Transport Protocol
HTTP
Transport Protocol Version
1.0
Url
http://******
security
Transport Headers
ChannelName=****** AS2-To=******AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****AS2_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=***** Recipient-Address=*******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=******* Content-Disposition=attachment; filename="smime.p7m" Host=***** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=***** Mime-Version=1.0
Thanks,
Amirineni

Not Able to Start UAServer for upgrade to NW2004s

Hi,
I am in the process of upgrading a NW2004 System to NW2004s.
I know that for upgradation i have to start the UaServer.
When i start the UA Server, i am not able to start it
The following is the log file for the same
Pls help me in this
C:\Documents and Settings\bw3adm>java -cp D:\usr\sap\put\ua\ua.jar UaServer
UaServer> Stable storage file 'D:\usr\sap\put\ua\UaState' not found
UaServer> Creating stable storage file 'D:\usr\sap\put\ua\UaState'
Please enter administrator password
Enter password:*********
Confirm password:*********
UaServer> Temporary directory is 'D:\usr\sap\put\ua'
UaServer> Property file 'D:\usr\sap\put\ua\UaServer.properties' read
UaServer> Configuring HTTP server
UaServer> Using HTTP index file name: index.html
UaServer> Signing JAR file uagui.jar
com.sap.sdt.server.core.SDTServer.createService(SDTServer.java:281)
com.sap.sdt.server.core.SDTServer.startUaServer(SDTServer.java:126)
sun.reflect.NativeMethodAccessorImpl.invoke0(null:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(null:-1)
sun.reflect.DelegatingMethodAccessorImpl.invoke(null:-1)
java.lang.reflect.Method.invoke(null:-1)
com.sap.sdt.util.misc.MethodCall.invoke(MethodCall.java:80)
com.sap.sdt.util.misc.BootStrapper.start(BootStrapper.java:76)
UaServer.main(UaServer.java:367)
msg.server.0002 com.sap.sdt.server.ext.r3up.R3upService
msg.diag.0002 java.lang.reflect.InvocationTargetException null
UaServer> ERROR:
com.sap.sdt.server.core.SDTServer.createService(SDTServer.java:281)
com.sap.sdt.server.core.SDTServer.startUaServer(SDTServer.java:126)
sun.reflect.NativeMethodAccessorImpl.invoke0(null:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(null:-1)
sun.reflect.DelegatingMethodAccessorImpl.invoke(null:-1)
java.lang.reflect.Method.invoke(null:-1)
com.sap.sdt.util.misc.MethodCall.invoke(MethodCall.java:80)
com.sap.sdt.util.misc.BootStrapper.start(BootStrapper.java:76)
UaServer.main(UaServer.java:367)
msg.server.0002 com.sap.sdt.server.ext.r3up.R3upService
msg.diag.0002 java.lang.reflect.InvocationTargetException null

Hi Balaji
I will suggest you few checklist :
1. See permissions in the security sub-directory.If its wrong it will be impossible for the Java Runtime to read the
security policy files.
2. temp directory not set.setting in enviroment variable
3. http://hostname:4239/ua/uagui.jnlp .try opening with this URL
4 Could you please check the proxy settings for your Java Webstart? It should be configured in a way that either mentioned host is contained in the list of
hosts which are not connected via proxy or usage of proxies is switched
off completely.
Let me know about the same.

Not able to start video capture

Hello, I have a Motorola Droid Ultra and ever since the android kit-kat update my phone is unable to record videos. Which effects my apps (ex. SnapChat , Instagram , Facebook) from recording.Whenever I try to record it say's "Not able to start video capture". I am able to take pictures by the way.
P.S. Any help is greatly appreciated.

That sounds like the camera bug, I think these phones were hit with in one of the updates, my Droid Maxx has been immune of it, because I've kept it on Jelly Bean I don't have the camera features that many have with K.Kat but until I see allot of improvement and no issues.. I'll keep her on Jelly Bean.. Sorry your having this issues.. it's the berries when you have to deal with issues as we've seen..

Not able to start OID 11g

Hi Everyone,
All of a sudden I am not able to start ODS instance that includes (OID and OVD). I can see OVD process is up but not OID. DB and listeners are up and running.
Any quick thoughts ?
Thanks

Great!!
Yes, that is the issue. Even though message says it is about to expire, it can not start OID. The reason is, when oidmon process tries to establish a connection to databased it expects the response "success" status. For oidmon process ,any message other than "success" is failure.
Try below:
1. Stop all components with opmnctl.
2. Reset OID schema passwords and make their passwords never to expire.
3. Start all opmn compnents.
Thanks
GK

Not able to start EPM Architect Process Manager.

I have installed Hyperion 11.1.1.3 and when i am trying to start the EPM Architect Process Manager Service i am getting the below error message.
The Hyperion EPM Architect - ProcessManager service on local Computer started and then stopped
Some services stop automatically if they have no work to do, for example, the performance Logs and Alerts Service.
I have also checked the Event Viewer and the below is what is logged into the event viewer.
Service cannot be started. Hyperion.DimensionServer.ProcessManager.Interface.ProcessManagerException: Cannot initialize the Session Manager. ---> System.InvalidOperationException: Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle client components installed. ---> System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B)
at System.Data.Common.UnsafeNativeMethods.OCILobCopy2(IntPtr svchp, IntPtr errhp, IntPtr dst_locp, IntPtr src_locp, UInt64 amount, UInt64 dst_offset, UInt64 src_offset)
at System.Data.OracleClient.OCI.DetermineClientVersion()
--- End of inner exception stack trace ---
at System.Data.OracleClient.OCI.DetermineClientVersion()
at System.Data.OracleClient.OracleInternalConnection.OpenOnLocalTransaction(String userName, String password, String serverName, Boolean integratedSecurity, Boolean unicode, Boolean omitOracleConnectionName)
I have also tried to start Hyperion EPM Architect - .Net JNI Bridge which i am able to start sucessfully howerver when i try to start the EPM Architect - Process manager i am getting the above error.
I have also tried to directly login into http://localhost:19091/awb and i am getting the below error.
Loading the Module 'awb.appcontainer' failed
Kindly help me out.

Hello, I have found the solution in my environment.
All Hyperion softwares will run on a x64 bit OS with x64 bit Oraclle client installed except FDM. I tried to run everything through Oracle x32 bit client and everything worked except EPMA, I received errors in the eventvwr that stated it could not run against a x32 bit Client. On my FDM server (w2k3 x64 bit) I had to install Oracle x32 bit client in order for me to get my FDM server fully functional.
thank you.

Not able to Start the oracle db error "ORA-01031: insufficient privileges"

Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishna

yes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh

U410: Not able to Start Windows 8 when booting

Similar Messages

Maybe you are looking for