U410 PLEASE HELP me with WIFI and Dolby on Windows 8
I've just purchase windows 8 Pro, everythings seem to working greate but WIFI an Dolby. Wifi didn't work no matter what I tried. I researched on this forum, maybe it causes by Intel Rapid Storage and the irresponsibility of Lenovo's driver coder team on Windows 8. Have anyone tried disable accelerate mode in IRST while keep RAID on ?
It seems nobody solved **bleep** U410 issues
Similar Messages
-
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
Okay! So, I need some help, and hoping someone here can do that! So my college has WiFi all over campus. When you use it on your laptop you connect like you would to any wireless network. Then once you go to a web browser your brought to the colleges website. Anyone can use the wireless network locally. However students with a password and user name can access full internet access. How it works is once you point your browser to a URL outside of the colleges network it brings you to a page to sign in using your username and password to be able to get outside of the local network. Then once you do that poof you can access the internet just as you would at home... How would I set my blackberry up to work with this? I have opera mini, and the blackberry browser and of course it dosent send me to the "sign in" page. HELP!
Blackberry Pearl 8120 AT&T
Most current OSBifocals wrote:
Hi and welcome to the forums!
If I read your post correctly, you have successfully accessed the campus network.
The problem is being able to access the options in the website. If you feel
comfortable with sending the address of the website we can test access.
Let us know,
Thanks
Okay, Not really exactly sure how I would go about getting it to you... You can only get to their stupid authentication/login page from the campus... Here is their page about the wireless access and what you need, yadda, yadda, http://www.clark.edu/student_services/computing_resources/wireless.php.
Also people keep telling me I need the WiFi browser. I have AT&T Wireless... and the only browsers I have are the one that was on the phone "Littleglobe with a yellow arrow the goes around the globe... I also have Opera Mini, the most current version and I noticed in there there is a WiFi box you can check I assume thats how you use it with WiFi.
Let me know if you need any more information! I would be happy to provide whatever I can. The people on the AT&T forums don't seem to be much help.
~Chris -
Please help me with recording and playing audio simultaneously!!!
Right now I can either play the incoming stream OR record it. I tried making Clones for datasource like :
DataSource clone1 = Manager.createCloneableDataSource(originalSource);
Then I pass it to these 2 classes:
new playThread(clone1).run;
new recordThread(clone1).run;
playThread is a Thread class that will take the cloned datasource and then plays it while recordThread will record the incoming datasource. Here is what happens when i run them one after another:
When I run playThread before recordThread I get ACM driver error. But if I run the recordThread before playThread the playThread's playerWindow shows up and plays for a split second then stops; The recordThread does record all the incoming stream though... Here are my questions....
1. Anyone know what my problem is? is it resource alocation? Threading problem?
2. Did I use the clone datasource correctly? I tried making clone1, clone2 but those didnt work well either...Should I do anything to the clones for record and play? all I did was pass them to the 2 classes and those classes just use them straight out without proccessing or anything...
Please help me out!!!! thanks a bunch!i dont think it is... i tried the clone thing but samething happened... it might be a Thread problem since when i put those together sometimes record runs sometimes player runs... and at the end i get "ERROR while querying ACM driver's information" error..... i am really confused...
DataSource clone1 = Manager.createCloneableDataSource(originalSource);
DataSource clone2 = Manager.createCloneableDataSource(clone1);
playerThread play= new playerThread(clone1);
recordThread record= new recordThread(clone2);
record.start();
broad.start();
anyone can help is appreciated -
Please, help me with parents and childs
hi,
I just can't figure it out which mc is the parent and which
are its children. Please help.
Here's the code:THX. I saw the same "family tree", but I started to doubt as
soon as I tried to add blur filter to menu items. I've found it on
the www.kirupa.com (they have some great stuff there). Here is the
direct
LINK
to the script. Can you tell me, how can I add a blur filter to menu
items. By default they are blured and OnRollover they get cleared.
regards -
Please help me with playlists and songs
Hiya Im really stuck!
I have an Ipod and am running windows, I added all my CD's and songs to my Ipod but as my computer doesnt have a lot of space I deleted them from the hard drive once I had done this.
Now when I try to make a standard playlist by dragging them onto the playlist I created it wont work and it also wont let me add any artwork to albums.
Am I being really thick or is there a simple solution.
Any help is really really appreciated
Thanks"Am I being really thick or is there a simple solution."
Yes. Don't delete them from your hard drive. You cannot create playlists of, or add artwork to songs that aren't there!! -
Please help me with audigy and ADA 885 in
i can't sovle the problem with Quad Mode of ADA 885 system even try all "bassfix" at Dell homepage.
I am using windows XP SP2.And i think maybe a new sound card can solve this problem.
What sound card can solve this? or is there any way to solve it without "touch the wallet"?. I like creative's one:Audigy 4,X-Fi ...
Please give me an advice!Hi,
There is a way to Get all the Values.
I have created Two Test table and will give the Details how is works.
Step1:
/* Master Table For ur Source */
Create table test_no
( id varchar2(1))
/* Inserted Three Rows as per ur requirement */
insert into test_no values('S');
insert into test_no values('P');
insert into test_no values('O');
Commit;
/* Transaction Table */
Create table Test_no1
( no number,
id varchar2(1))
/*Inserted the following Values in Transaction Table i.e. Test_no1*/
NO ID
1 S
2 S
3 P
4 P
5 S
6 P
7 O
8 O
9 O
/* Code For getting the Desired Results */
Select a.no,a.id
from Test_no1 a, test_no b
where a.id =decode(:MY_LIST,'A',b.id,:My_List) /* A is getting Treated as All for S,O,P */
and a.id = b.id;
/*If u provide the Value 'S' to :My_List the O/P will be */
NO ID
1 S
2 S
5 S
/*If u provide the Value 'P' to :My_List the O/P will be */
NO ID
3 P
4 P
6 P
/*If u provide the Value 'O' to :My_List the O/P will be */
NO ID
7 O
8 O
9 O
/* Now if u provide the Value 'A' to :My_List the O/P will be */
NO ID
1 S
2 S
3 P
4 P
5 S
6 P
7 O
8 O
9 O
All the Rows will be Displayed.
U can change the Where clause as per ur SQL and try running it.
I hope this will help u. -
Please help me with feedburner and iTunes! Help!
I'm knew to podcasting, so if someone could help me out you'd rock. I have a show on podbean.com, and my show is also on iTunes.
I burned the feed with feedburner, but feed burner shows 0 subscribers 0 listeners. Podbean.com shows hundreds of downloads.
Could someone explain to me IN PLAIN SIMPLE ENGLISH how to get iTunes to recognize my feed burner version of my feed?!?! I can't seem to make sense out of any answers online, and i am frustrated!
Here are my links, could someone simplify this for me? Thanks.
http://todayinipad.podbean.com/feed/
http://feeds.feedburner.com/TodayInIpad
-Dr. BradThis is the problem with services like Podbean, they may make things easy, but you don't have a lot of control. The same is true of Feedburner, of course; mostly it works OK but you should be aware that if you wanted to change from it you would have the same problem. On the plus side, you can change the feed which you submit to Feedburner without upsetting iTunes, and of course you get the statistics which iTunes does not provide.
In order to remove your existing podcast, follow the instructions here. Then submit anew using the Feedburner feed, or another if you decide to do that.
However, if you keep the same title you will probably have the submission rejected on the grounds that a podcast of that name has already been submitted (even though it's been removed) - this appears to be a bug in the Store. You will probably need to make a small change to the title - a bit of punctuation, perhaps, such as 'Today - in iPad'; you could then change the title back once the feed has been accepted and is up and running. -
Can someone please help me with a flash problem in Windows 7 IE9?
For the last week or so I have not been able to see videos on certain websites. Today it is CNN. Another one I can think if is cbc.ca. I have tried all the solutions already listed on this website on the page regarding windows 7 issues. http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html ---- clearing browser and flash cache, changing settings etc. I couldn't find the place to clear the flash browser data,(step 5) it wasn't under control panel as instructed but I did do the following step (6) clearing the cache. I also did some stuff on other pages where I had to check if I could html videos. and other stuff. I have been trying for hours.
I have searched on the internet for solutions too but nothing seems to work.
The players control panel shows up on the bottom but the screen stays black. I updated again today and see there have been several updates over the last few days when checking my versions through the windows utility. I was not allowed to restore to any previous versions. I really don't want to have to do a system restore to an earlier date as this is a new computer and I have spent a lot of time installing programs.
I play a webgame that requires flash and it works fine.
flash version
11.4.402.287
windows7 64 bit
IE9
Thanks
P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?RE: "P.S. I found it aggravating that I couldn't copy and paste text here, it wanted me to insert as a link or an image, how do you insert plain text?"
I take it you tried using the "right click" menu? That doesn't seem to work, as you noted, but, you should be able to paste text by pressing your CTRL key and while holding it down, press the "V" letter key.
CTRL + C = COPY
CTRL + X = CUT
CTRL + V = PASTE
HTH,
Ortho_Fan -
Please help me with the prolbem of close window
//it is a simple program as following:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
/*class MyWindowListener extends WindowAdapter
public void windowClosing(WindowEvent e)
System.exit(1);
public class FrameEvent extends JFrame
class MyWindowListener extends WindowAdapter
public void windowClosing(WindowEvent e)
System.exit(1);
public FrameEvent()
setSize(350,100);
show();
public static void main(String args[])
FrameEvent app=new FrameEvent();
app.addWindowListener(new MyWindowListener());
if i put body of class MyWindowListener out of base class,it is ok
but if i put it in base class as above ,error tells me
" non-static variable this cannot be referenced from a static
context"
why can`t i put body of class MyWindowListener in the base class?thank you very muchYear ,you are right,when i add the listener in the constructor,it is ok ,what`s more,when i put the listener in the base class but declare it with "static",it is ok as well,so i know the static method should reference static variables,thank you very much!!!!!!!!
-
HELLO, I UNLOCKED MY 3GS PHONE THEN RESTORED IT TO FACTORY DEFAULTS THROUGH ITUNES THEN COULD NOT REACTIVATE THE IPHONE, I TRIED SEVERAL TIMES USING WIFI AND ITUNES, IT CAN NOT DETECT THE SIM, SOMEONE PLEASE HELP ME WITH FOLLOW UP, THANKS
sir as ur reply i guess that my phone has locked again as i restored to factory defaults, now if i try with a att active sim then can i activate the iphone ? and i think i need to unlock again if i want to use sim other then att right ? pls reply me in details asap
-
I just bought this movie "Godzilla 2014" but it won't show in my Movie Library. I closed my Itunes and put it back on again but still won't show up. I checked my purchased list and it shows that I recently bought the movie but when I checked the itunes store it wants to buy the movie again. Please help me with this right away Apple.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Hi,
I have an iPad 2 that is defective. Apple has replaced it with a new one. First off, how do I know if I have a Sim card? Secondly, I backed up my old iPad the other night (iPad plugged into iTunes). Can somebody help me and explain how I set up my new iPad now? Then how do I register it with my new serial number, etc.? Any and all help is appreciated. I'm not mechanically inclined, so to speak, so if anyone can make it easy on me it would be greatly appreciated. By the way, my iPad 2 is a 64 GB with WiFi and 3G. Thanks in advance for any and all help.You need to restore your iPad from iTunes.
Start iTunes.
Plug in your iPad using the USB cable.
Click on the iPad in the left hand column under "Devices".
In the "Summary" tab, there are options to Back up, Update and Restore.
Choose Restore, choose the backup and let it run.
http://support.apple.com/kb/HT1414
If your old iPad was capable of receiving data on the go, without wifi, then you have a SIM installed. Best to check anyway. You need either the tool supplied in the box, or the end of a paper clip to open the tray
http://support.apple.com/kb/HT5163 -
HELP!!!! My Hotmail no longer works with Safari v. 5.0.6 and my Imac Leopard operating system 10.5.8. Please help me with any suggestions on what to do. Thank you. I cannot find any new downloads for Safari that work with Leopard. The newest ones only work with Lion. My Firefox browser still works though but I would rather use Safari and cannot access any e-mails or send any e-mails via Safari. This happened about 3 weeks ago and I thought it was just a glitch on Hotmail's site. Now I realize Hotmail must have released an update that no longer works with Leopard 10.5.8. PLEASE HELP ME!!!! Thanks to anyone and everyone who reads this and attempts to help me. I do not know what to do....
Hi Sue,
What exactly happens when trying Safari?
They did change it to Outlook recently, but while not pretty, I can access mine with Safari 4.0 still...
You can also set it up in Mail so you don't need a browser at all if you want. -
Hello, Honestly I just updated my 4s and my iPad 3 to iOS 6 and when try to press on the Music app or the iTunes app it says "cannot connect to iTunes Store" Could you please help me with this thank you so much, Charbel from Lebanon
See these previous discussions help.
App Store Updates (but only Updates)...: Apple Support Communities
Apps suddenly don't update: Apple Support Communities
Maybe you are looking for
-
The New PS CC Images / Size implementation
Anyone else a little disconcerted by the new setup of 'Image/size' menu? Its lost one whole parameter that used to be there by default... Now you have to go find it by click on the drop down and selecting inches.... If I recall it used to show: heigh
-
HT201269 how do i get my music off my old ipod touch and put it on my new one
How do I get my music off my old ipod touch and put it on my new one
-
Balanced score card: value fields(datasource)
Hi Friends, I'm trying to assign measure to objective in scorecard design. In value fields tab, specified two value fields: Actual & Plan and trying to assign datasource to these two. For that i clicked details button, it gives a pop-up asking data s
-
Hi all i have installed developersuit10g release2 and configured the webutil according to webutil_demo. but when i run the demo form wu_test_106 it gives me error ORA-06508. i checked avaerything its according to the demo document. i also download th
-
HT1461 how do i know if my mac works with 32 or 64 bit of windows 7
Any clue? Thanks