U410 touchpad Driver stops working

I bought a new U410-- i7--- windows 8.
The touchpad stops working after some time .. then I have to reboot the system to again get it up & running.
then it again works fine for some time ... And again goes off..!!!
If I open the mouse properties from control panel when it stops working ... It says me to uninstall the tochpad driver and install a new one ... I have installed or updated the synaptic driver several time ... But no optput
Moreover , I ordered a replacement for it .. and the new one also has the same problems ...!!!
I have also tried the One-Key recovery option ... but No Output..!!
Lenovo techsupport is also unable to get to the problem .. and rectify it ..!!
Can anyone help me on this ... ??
PS: what has happened to lenovo's quality ..
Solved!
Go to Solution.

Most likely you're experiencing this issue when starting Microsoft Office (I did too)
Here's how to fix it
1.
Download the 16.3.9.0 driver from here
http://www.station-drivers.com/page/Synaptics.htm
2.
uninstall your current synaptics driver and reboot when it asks you to (your touchpad will still work, just without gestures and it will move slower than before)
3.
Install the new driver and restart if it asks you to
4.
Go to the mouse properties and the synaptics tab and adjust the touchpad to your liking
(here will be 2 devices listed, clicking the settings of one of them brings up manufacturer information, the other will bring up configuration)
5.
No more nonworking driver
just so you know, resuming from sleep will cause the synaptics driver icon to appear in your taskbar even if you have disabled it from appearing there, but it will go away automatically
and also, the 4-finger flick option in the configuration settings will not work, but everything else should
message me if you need assistance

Similar Messages

Emachines E525 - Alps Touchpad Pointer stopped working

my laptop's Alps Touchpad Pointer stopped working, but the software shows it as "working properly." Touching the pad or clicking the buttons does nothing though. Restarts and reinstalling the driver has also done nothing. Whats going on? This laptop is only 12-16 months old and the touchpad is already dead? Help please!

Sounds like you need to get it fixed, not sure how much touchpad fixing cost at best buy. But if its over 300 I would suggest looking for a better brand notebook.
I like things that go beep

HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Satellite C series - Touchpad has stopped working running Windows 8

Hi
I dont know if anyone can help.
My touchpad has stopped working.
At first it would only work on the login page. Now its not there at all.
I have only had my Toshiba C for a few days and its the first time I have used Windows 8.
I have tried F5 and I have tried going onto BIOS using F2 when booting but that wont come up.
Help plz

Hi
Please check this Toshiba document:
+How to change the Synaptics touchpad settings in Windows 8?+
http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm
Be sure that the required touchpad settings are enabled!

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

CD drive stopped working on my Satellite L

Hi
MY CD drive stopped working, but then it recognised a disc which I had inserted, but then stopped working again.
I have deleted upper and low filters from device manager.
I have also downloaded the dvd ram driver from toshiba and my cd drive then worked, but after I closed down the computer, again it would not recognise discs in the drive.
I again downloaded the driver and it then recognised the disc I inserted into the drive.
However, now my computer will not recognise the drive even when I again download the driver.
Does anyone know why it would work intermittently or have any ideas that might help.
Thanks.

Which satellite L do you have?
Which operating system do you use?
Do you use original Toshiba recovery image?
Is ODD recognized properly in device manager?
Which disc do you use?
Do you have this problem using only this one disc?
Sorry buddy but your description is so general and there is no one single relevant info that can help for better understanding.
What you can expect are just general answers like:
-reinstall ODD
-test with different discs
-defect ODD

Intel wired ethernet driver stops working

We have this issue with several T400 and T500 series ThinkPads that the Intel ethernet driver stops working after a while. All this started to happen maybe a month ago. We have both 32- and 64-bit Windows 7 OSs.
Wired ethernet works ok first, but after a few hours or a day or two this yellow exclamation mark appears on the network icon and it says limited or no connectivity. Wired network stops working and there is nothing we can do to fix this other than reboot the computer. It doesn't even shut down properly, just says "Shutting down" forever and blinks the HDD led maybe once a second. So we have to force it and after booting everything is ok until the next time this happens.
When the network stops working, nothing can be done with the driver because everything just hangs. You cannot disable the connection or uninstall the adapter from Device Manager or anything. Unplugging the ethernet cable does not help either. There is nothing about this problem in the Event log other than about the symptoms of not having a network connection.
What could be the source of this problem? Do you have any ideas about how to diagnose this problem further? We have the newest driver and I have also tried the newest driver from Intel.

Go to Local Area Connection (Wired Intel adapter), Properties and the Configure button, in the Power Management Tab UNCHECK "Allow the Computer to turn off this device to save power".
Window7 does NOT always resolve IP and DHCP when it come out of sleep etc. All attempt to release/renew are in vain. I have seen this on various systems for some time. Occassionally a router reboot fixes it but most of the time is the PC. Frustrating but for Wired use this should always be disabled if you're using it a lot. Power savings is not in your best interest.
Let me know if that does it.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

ITunes8 -- all optical drives stopped working

After installing iTunes 8, all my optical drives stopped working. Windows simply didn't recognize them. Device manager said they were missing. However the BIOS found them. Uninstalling iTunes8 fixed it.
However, like everyone else here, now I can't return to a previous version of iTunes because it refuses to recognize my library file (a .itl file).
Argg
What can I do, to either use an older version of iTunes, or fix this problem?

I tried the suggested fix on Apple's site (http://support.apple.com/kb/TS2372?viewlocale=en_US) but both my DVD drives remained invisible.
Then I tried the one at MS suggested by Adrian Kingsley-Hughes on his ZDNet blog (http://blogs.zdnet.com/hardware/?p=2600):
http://support.microsoft.com/kb/314060
Hooray! It worked! Not only have my drives reappeared, but I am burning a DVD right now using InfraRecorder.
Unfortunately, now I get a nasty message about missing registry data whenever I start iTunes, but I assume Apple will fix this problem in some future release. I'll have to live with it until then.
I spent hours on this today and almost ordered some new SATA drives, thinking the IDE controller on my mobo must have gone bad. I really appreciate the existence of Adrian's blog and other third party resources!
And I am very annoyed at Apple right now. Releasing software that breaks peoples' computers in a major way is not acceptable, IMHO. Leaving the bad software out there and posting fixes that don't work is even worse.
BTW, I am running XP Pro SP2. I have Logitech hardware and software installed, as well as a number of other USB devices (Treo, Canon printer and scanner, iPod) so (according to Adrian and other sources) I guess I was a likely victim.
Note that, having been burned before by new major releases of iTunes, I was cautious: I held off on installing iTunes 8 until the second release, hoping they'd have fixed any really bad bugs that showed up in the first release by then.
Silly me.

My macbook hard drive stopped working and I loaded another hard drive and can access time capsule but it doesn't show any of my old files and I don't understand why

My 7 year old macbook hard drive stopped working and I put in another hard drive but when I went to restore my information from airport time capsule it only shows today and nothing older. Help?

Did you do a TM backup after you installed the disk? It may write over the previous backup.. but it should actually start a new one.
Read the info about using migration.. see http://pondini.org/TM/Home.html
Or the Mac is probably looking at the backup as from a different computer.
See the details of how to use TM to restore to a different Mac.
Q17 here. http://pondini.org/TM/FAQ.html
I would read through 14-17 carefully.
You should be able to do a full recovery of the TM backup to a USB drive plugged into the computer.

When using lighting effects in cc programme freezes and then window comes up sayind amd driver stopped working but is now ok. Tried to open lighting effects in cs6 and default spotlight is there but then it freezes. No mention of driver problems. Any s6

Problem with accessing lighting effects in cc and cs6. In cc programme freezes and then window appears saying amd driver stopped working but is now ok but cc still frozen. Tried opening in cs6 no problem with driver but just default spotlight appears and then programme freezes. Any suggestions.

That is very old for drivers and new driver for the chipset will not be coming I do not see it as supported either Photoshop CC and CC 2014 GPU FAQ
Tested video cards for Photoshop CC and CC 2014
Adobe tested the following video cards before the release of Photoshop CC and CC 2014. This document lists the video card by series. The minimum amount of VRAM supported on video cards for Photoshop CC and CC 2014 is 512 MB.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2013, you can assume that the card will work with Photoshop CC and CC 2014.
Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model (Laptop and desktop versions have slightly different names.)
nVidia GeForce: 400, 500, 600, 700 series
nVidia Quadro: 2000, 4000 (Windows and Mac OS), CX, 5000, 6000, K600, K2000, K4000, K5000 (Windows and Mac OS)
nVidia GRID K1, K2
AMD/ATI Radeon: 5000, 6000, 7000, R7, R9 series, 7950 Mac OS
AMD/ATI FirePro: 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900, W8100, W9100, D300, D500, D700
AMD/ATI FireGL: W5000, W7000, W8000
Intel HD Graphics P3000, Intel HD Graphics P4000, Intel(R) HD Graphics P4600/P4700, Intel HD Graphics 5000
Note: AMD/ATI 1000, 2000, 3000, 4000 series, nVidia GeForce 7000, 8000, 9000, 100, 200, 300 series and Intel HD Graphics (First generation) cards/GPUs are no longer being tested and are not officially supported in Photoshop CC and CC 2014. Some GL functionality is available for these cards, but it's possible that newer features don't work.

Radeon display driver stopped working

Hi
I am running Win 8.1 x64 (up-to-date) on HP Pavillion 1322TX laptop. There are Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the ATM driver stopped working. I found many problems with this driver in the past as well. When I check the relevent page for my laptop model, there is no update since 2012. What the hell!
Can I update these two drivers seperately by getting updates from Intel and AMD sites?
Is there any update for catalyst control system (CCC) ?
When I try to update through the CCC or HP Support Assist, it is always no updates.
Can any one please advise me?
PS. I am fed up with HP and ATM, I wont go for HP again and never recommend for someone elese.
This question was solved.
View Solution.

Hi JSHLMS,
I see that you have some questions regarding the your switchable graphics. You will not want to use the drivers available from Intel and AMD because with switchable graphics it is the manufacturer of the notebook that configures the drivers. Intel and AMD provide a basic driver and HP configures for their notebooks. You can download the latest AMD software package which includes CCC here. I did some research and found Windows 8.1 versions of your drivers but as your model doesn't have specific drivers I can't guarantee that they will work. If these drivers don't work then I recommend downgrading back to Windows 8.
Intel High Definition Graphics Driver
AMD High Definition Graphics Driver
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.

My Macbook Pro optical drive stopped working after upgrading from Mac OS X 10.6 Snow Leopard to OS X Mavericks.. I wonder what's the work around or troubleshooting to fix this. Thanks!

try and Reset the System Management Controller (SMC)

Macbook pro optical drive stopped working after installation of mavericks

macbook pro optical drive stopped working, just spins and won't eject, ever since I upgraded to Mavericks, thoughts?

I have the same problem and was advised by someone to reset System Management Controller (SMC). I haven't tried it yet though. I wish it could fix it. Let's give it a shot!

Driver stopped working (pavilion dv5 1388)

My laptop froze and a message popped up saying my driver stopped working. Then another message popped up saying my driver isn't working at all. I can't play any games, because of this they do not work properly; they just stop working. Does anyone have any clue on what I should do to get the driver working again? Is there a driver that I need to download?

Hi neWeRA,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook froze and you received a message that a driver has stopped working and you are unable to play games.
Have you tried running The HP Support Assistant to look for HP updates and help resolve issues.
Here is a link to HP Pavilion dv5-1388us Entertainment Notebook PC Drivers.
Have you checked for viruses?
I would also run a hardware test to rule out a malfunction. HP Notebook PCs - System Diagnostics (F2)
If everything tests fine and you are unable to install the required driver, you can do a system restore back to a knonw good date. Using Microsoft System Restore (Windows 7).
If that is not an option I suggest you do a recovery back to factory. Performing an HP System Recovery (Windows 7)
During the recovery process you will receive a prompt to backup you personal data. If you have not done one recently, I suggest you do one now.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Please let me know the outcome.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Hp dv9810us notebook dvd/cd drive stopped working

I have hp dv9810us notebook running vista home premium and my dvd/cd drive stopped working. Doesn't even show up in Devive Manager. Before I started trying stuff I was wondering if this a common problem with a easy fix. thanks

Fairly common, but, usually, no easy fix.
Some things to try in this post:
http://h30434.www3.hp.com/t5/CD-DVD/Read-this-for-CD-DVD-Drive-with-burning-missing-drives-not/td-p/...
I have the same notebook and also lost my dvd drive. My problem resulted from the nvidia graphics problem. Google "defective nvidia gpu" if you are not familar with this.
Mine died three months after I lost the drive, but I revived it with a pseudo reflow method by baking my motherboard @ 385 degres F. My dvd drive is back and the laptop runs noticeably cooler.
Good luck

U410 touchpad Driver stops working

Similar Messages

Maybe you are looking for