U410 upgrade to touch screen from standard

Is it possible to upgrade from the stadard U410 the touch model? I know my compluter uses LCD screen B140XTN02.0, but can I just get B140XTN02.3 with the touch screen and digitizer or will there be a missing connection somewhere? If there is, is there a way around that?

It can't be done.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Similar Messages

  • Upgrade Oracle 9.2 - from Standard to Enterprise

    Can anyone please point me in the right direction on how do I -
    Upgrade Oracle 9.2 from Standard edition to Enterprise Edition.
    Any doc - highly appreciated..... [email protected]
    Thanx
    Deepak

    Hi Ontrack,
    first of all read note
    740897 - Info about the Oracle license scope; required Oracle options
    Running any SAP system on a non enterprise edition is not supported.
    Since SAP did not deliver the standard edition to you, somebody has installed the SAP system wrong in your corp...
    Because of the above, SAP does not provide a supported upgrade way, except a heterogenous system copy. Basically we did not test this scenario, because we don't support it.
    Anyhow, Oracle has a way for this:
    Metalink: How to Upgrade from Standard to Enterprise Edition
    Doc ID:      Note:117048.1
    The core part of this note is:
    The following steps need to be taken to convert your SE database to an EE:
        1. Backup the database
        2. De-install the SE software
        3. Install the EE software
        4. If you have an existing database, point your ORACLE_SID to this
           pre-existing database
        5. Startup the database
        6. Run the "catalog.sql" and "catproc.sql" scripts, as usual.
    Well, pretty easy isn't it?
    KR Lars

  • Windows 8 upgrade problems (touch screen and audio)

    my　computer is HP touchsmart 600 1005xt and recently upgraded from windows 7 to windows 8 (64-bit)
    after up grading I noticed that the touch screen does not work and and the speakers also did not work

    HI,
    Here are a few tips that might help you to get your touch screen working:
    Activate Windows and install updates by pressing the Windows logo key + W. Type "Activate Windows" into the search field, and then click on the Activate Windows icon that appears in the upper left corner of the screen. In PC Settings, click on Activate Windows, wait for your computer to connect to Microsoft, and then follow the onscreen instructions. Restart the computer. Press the Windows logo key + X, and select Control Panel from the menu. In the upper right corner of Control Panel, select Large Icons from the View by drop down. Click Windows Update. Install touch and/or graphics driver updates. Restart the computer.
    Another thing to try: Go to the HP Support and Drivers site and click Drivers and Software.  In the search field, enter your product name or number, and then click Next. Select your operating system from the drop-down, and then click next. (If you don't know if your operating system is 32- or 64-bit, press the Windows logo + X key again and select System from the menu.) Follow the onscreen directions to install any appropriate drivers. Restart the computer.
    If the touch still doesn't work, try this: Press press the Windows logo + X key, and select Device Manager from the menu. In Device Manager, click the little triangle next to Display Adapters to expand the list. Right-click on the graphics card and select Disable. When asked if you want to disable the card, click yes. Restart the computer. You may have to tinker with your screen resolution.
    ~Lil.Liebe
    Clicking the white KUDOS THUMBS UP on the right is a way to say thanks!
    Click Accept as Solution on a reply that solves your issue to help others in search of answers.

  • How to get the screen value to custom screen from standard screen

    Hi all,
    I have a standard screen which is attached to a standard function group and a custom screen which is attached to a custom function group... Now my requirement is to get some field values from the Std screen to my custom screen ...
    I have used the FM DYNP_VALUES_READ but its resuts in error...
    in my current screen PBO i called this FM and given the prog name as the Std pgm name which being created while creating the screen from the function group and the screen number as the standard screen number...
    Eg : Standard Function gp = FSBP_02
           Pgm name  = SAPLFSBP_02
          Screen Naumber = 0220
    Custom screen = 9001
    Pgn Name = zname
    in 9001 PBo i called
    DATA: IT_DYNPFIELDS  TYPE TABLE OF DYNPREAD,
           WA_DYNPFIELDS like line of IT_DYNPFIELDS.
    WA_DYNPFIELDS-FIELDNAME = 'BP021-BUSINESS_Y'.
    APPEND WA_DYNPFIELDS TO IT_DYNPFIELDS.
    CALL FUNCTION 'DYNP_VALUES_READ'
       EXPORTING
         DYNAME                               = 'SAPLFSBP_02'
         DYNUMB                               = '0220'
        TRANSLATE_TO_UPPER                   = ' '
        REQUEST                              = ' '
        PERFORM_CONVERSION_EXITS             = ' '
        PERFORM_INPUT_CONVERSION             = ' '
        DETERMINE_LOOP_INDEX                 = ' '
        START_SEARCH_IN_CURRENT_SCREEN       = ' '
        START_SEARCH_IN_MAIN_SCREEN          = ' '
        START_SEARCH_IN_STACKED_SCREEN       = ' '
        START_SEARCH_ON_SCR_STACKPOS         = ' '
        SEARCH_OWN_SUBSCREENS_FIRST          = ' '
        SEARCHPATH_OF_SUBSCREEN_AREAS        = ' '
       TABLES
         DYNPFIELDS                           = IT_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA                 = 1
        INVALID_DYNPROFIELD                  = 2
        INVALID_DYNPRONAME                   = 3
        INVALID_DYNPRONUMMER                 = 4
        INVALID_REQUEST                      = 5
        NO_FIELDDESCRIPTION                  = 6
        INVALID_PARAMETER                    = 7
        UNDEFIND_ERROR                       = 8
        DOUBLE_CONVERSION                    = 9
        STEPL_NOT_FOUND                      = 10
        OTHERS                               = 11
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    How Can i get that... Its important ... Please help me...

    Hi,
        Try with the below FM
    RS_REFRESH_FROM_SELECTOPTIONS
    in your custorm program, check the SY-CPROG and SY-XPROG values, for the standard program name or directly pass the importing parameter for the above FM as SAPLFSBP_02.
    Regards
    Bala Krishna

  • 6th generation nano screen black but able to touch screen from memory to get music to play..called customer support they said it's the backlight since touch screen can still be touched and music can be played..any thoughts?

    second 6th generation nano..again with the same problem..screen is black will not turn on but am able to touch screen and get music/radio to play...able to touch around on screen from memory..nano is recognized in itunes and computer..but screen will not turn on..called customer support today..of course out of warranty but was told that it sounds like my backlight is burnt out and that's all i need fixed, told that it shouldn't be that expensive (live in myrtle beach SC) and that my screen is fine since i am able to touch around on it...any thoughts?
    thanks to all for any advice or input..will try to take to local icitymac store in next couple of days
    jenn

    Replacing the backlight usually requires replacing the entire front LCD/digitizer.  And yes, it sounds the backlight has burned out.
    Keep in mind that if you go the Apple route, they won't actually repair the iPod, but instead will do an out of warranty exchange meaning your current Nano will be replaced with a refurbished model of the same capacity and generation.
    B-rock

  • Preventing iPod touch screen from going blank when iPod's powered.

    Hi there, is there anyway (or app) to prevent the iPod touch's screen from going blank/turning off?
    This is why I ask...
    I often use my iPod touch as my remote, where I choose which of my iMac's iTunes songs to play next and besides I'm always revising/updating the songs' ratings.  My iPod has a password to unlock and so, doing what I just said often can be bothersome.  I've found out that, if the iPod's own music is playing when connected to the power, the screen never goes blank, it only dims, which is very helpful but, since I'm not listening to the iPod, I always have to turn the iPod's volume all the way down.  Also this increments the number of plays to all those songs played back which is something I don't like either and so, again my question is, does anybody know if there is any way or app that, when the iPod's connected to power, only dimmed the screen (but not allow it to go blank)?
    Hope you can help.
    Thanks.
    Jorge...

    Go to Settings>General>Auto-Lock and set time to never.  If you have a corporate exchange mail account on the iPod that may prevent using never (Never not present).

  • Touch screen from windows to mac

    If I have a touch screen windows computer and I install mac with VMware with the touch screen work?

    It may depend on vmtools support for your hardware. Might try them here.
    https://communities.vmware.com/welcome
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Trying to upgrade iPod Touch 4G from 4.2.1 to 5.0.1...

    I have been having problems with my home button since late Dec 2011 (about a week before the warranty ran out). This week the button decided to completely die on me (I tried fixing it with rubbing alcohol and compressed air, nothing made a difference). I have been trying for 2 days now to upgrade to iOS5 so I can use the assistive touch on screen home button. I have a 64 bit Windows 7 system that is new and clean. I upgraded to iTunes 10.5.3 through iTunes itself (that was a fight). I did all my syncs and back ups. Then I tried to update my iOS through iTunes. I keep getting a 'connection timed out' error after anywhere from 5 to 30 minutes into the download. I've tried disabling my anti-virus and firewall, nothing changed. I tried running iTunes diagnostics and its telling me that the connecting to the firmware server was unsuccessful (connection timed out). So I tried to do a fresh install on a Windows XP machine that I use only for internet (not bogged down with tons of files and programs). This machine never had iTunes on it. That took half the morning to even get that to work, but I had the same outcome as on my other machine. I've tried downloading the IPSW file from many different sites. When I go to load that file on through iTunes (shift+click on upgrade or restore), it tells me that it cannot upgrade because the firmware is not compatible. I double and triple checked that I had the firmware for iPod Touch 4G (and yes, I have a 4G). I started iTunes in safe mode and am trying the download only now...so far its been downloading, but as I type this it is probably doing the connection timed out thing (yep, before I even hit Post Message). The computer is wired to the router, I could try a direct wire to the modem, but I don't know if that'll help. So I do not know what else to do. Anyone have any suggestions? I just want to get my iPod up and running with the on screen home button...

    Prita wrote:
    I want to update my current iOS from 4.2.1 to 5.0.1 for the Assistive Touch feature that allows you to have an on screen home button
    I tried downloading the file myself (not through iTunes), making sure I got the iPod 4G file. Go into iTunes and install it and it says it cannot upgrade because the firmware is not compatible
    iOS 4.2.1 - there's a clue. It begs the question about which model of iPod you have. Yes, I know you said:  (and yes, I have a 4G) by which I assume you're saying that you have a 4th generation Touch, but are you sure? This has been claimed before by people who then discover that they do not have a 4th gen Touch. Which size Touch do you have and what is the model number on the back of your iPod? If it says model A1288, that's a 2nd generation iPod Touch. Check this page  http://support.apple.com/kb/HT1353 for help in identifying your model of iPod.
    The second clue - and the reason I've mentioned all this, is that you then say you have downloaded the file yourself but "it cannot upgrade because the firmware is not compatible." In other words, iOS 5.0 cannot be used with your iPod. That also suggests that you have 2nd gen Touch.
    Persumbaly, you have tried connecting the Touch to iTunes and selecting "check for updates?" What does it say?

  • Calling custom dialog screen from Standard Transaction(user Exit)

    Hi, I'm calling Standard Transaction from a Custom Screen. I'm calling a custom screen again with in standard transaction (implemented custom screen thru user exits using macros). But when I click 'continue/cancel' in the custom screen, control is going back to main cutom screen rather go back to standard transaction. Could anyone please help me out how to come back to standard transaction from custom screen rather going back to main cutom screen.
    ***INCLUDE LZ_R_FORWARD_FORWARD_LOADI01 .
    *&      Module  USER_COMMAND_9000  INPUT
    MODULE user_command_9000 INPUT.
      CASE sy-ucomm.
        WHEN 'EXEC'.
          PERFORM validate_popup_data.
          IF flag_error_screen NE 'X'.
            MOVE-CORRESPONDING ZFFL_POPUP to var_ZFFL_POPUP.
            clear flag_return.
            SET SCREEN 0.
            LEAVE SCREEN.
          ENDIF.
        WHEN 'CANC'.
          flag_return = 'X'.
          SET SCREEN 0.
          LEAVE SCREEN.
        WHEN OTHERS.
      ENDCASE.
    ENDMODULE.                 " USER_COMMAND_9000  INPUT
    *&      Module  exit_9000  INPUT
    MODULE exit_9000 INPUT.
      CASE sy-ucomm.
        WHEN 'CANC'.
    *      MOVE perf_flag TO lbpla_exist_flag.
          flag_return = 'X'.
          SET SCREEN 0.
          LEAVE SCREEN.
      ENDCASE.
    ENDMODULE.                 " exit_9000  INPUT
    Thanks in advance.

    Hi
    So the command SET SCREEN 0. LEAVE SCREEN. should "place" the program just after the calling of the popup so here:
    FUNCTION z_call_screen.
    * Call the Pop up screen
        CALL SCREEN 9000 STARTING AT 35 05.
    "<------------------------- The program should be here after going back from popup 9000
    ENDFUNCTION.
    Is it true?
    Max

  • Call Screen from Standard program

    How to Call a screen of a Z Program from an exit in a standard online program...???
    Thak's
    Flavio Rasseli

    Hi.
    I create dialog modules via SE35 to Call a screen of a Z Program from an exit in a standard online program.
    In the standard:
    CALL DIALOG 'ZTEST2'
         EXPORTING
              act_new FROM 'X'.
    But the screen is shown in "full screen".
    <b>How to show screen with the definition of the position?</b>
    Example:
    ...STARTING AT 2 2
       ENDING   AT  60 09.
    Thank's
    Douglas Sant'Ana

  • HT4972 Want to upgrade iPod Touch 2G from iOS 3.1.3 to iOS 4.2.1 - Help!

    I have an iPod Touch 16GB 2G that currently runs on iOS 3.1.3. When I check for updates to the software in iTunes, I'm told that the software is up to date. Yet, online, many sources say that my iPod touch can be upgraded to iOS 4.2.1. But, I cannot figure out how to download/install. Please help direct me to where in iTunes, the iTunes Store, or online I can download and install this older software upgrade.

    Sorry but Apple only allows you to update to the latest iOS.

  • I want to upgrade my hard drive from Standard 500 HHD to a SSD on my macbook pro non-retina mid 2012

    I have two choices I'm going to install the hard drive internally and I want someone who has an idea about this now money isn't a problem and they are both close to each other. I want to buy one of these two can someone please tell me which is best.
    1- http://eshop.macsales.com/item/Micron/C400512G25/
    2- http://www.crucial.com/store/partspecs.aspx?IMODULE=CT480M500SSD1 and http://eshop.macsales.com/item/Crucial/CT480M500SSD/
    By the time I do this of me I am also going to have a 16 GB RAM instead of the 4 Gb
    Now remember my MacBook Pro 15" non-retina mid 2012 i7 2.3 Hz

    First, see my one and only user tip -> Upgrading your MacBook Pro with a Solid State Drive. It has some tips that may be of help.
    Secondly, either of the drives that you've chosen should work well in your MacBook Pro. "Micron" is also the manufacturer of the Crucial SSD. I'm just a bit skeptical about the first because of the unknown nature of the beast... and I doubt that it has the most recent technology built into the Crucial M500 480GB.
    You can buy from Crucial or through OWC - I would just pick the one with the cheaper price but I would definitely get the M500 series over the somewhat 'older' (based upon m4 technology, I'm betting) Micron drive.
    Good luck... call back should you have any questions.
    Clinton

  • Upgrade from standard to enterprise on a cluster.

    SQL Server 2008 R2 Standard
    Windows Server 2012 R2 Standard.
    Two node Active/Passive Clustered, lets say NodeA is active and NodeB is passive.
    Need to upgrade the edition only from standard to enterprise.
    Want to understand if we need to apply the upgrade manually on both the nodes one by one
    or Only we apply the upgrade only on the passive node and it will get applied to the active node by itself once we failover to the passive node. Lets say we first run the upgrade from the passive node NodeB and after the setup completes, we manually fail-over
    from NodeA to NodeB. Once we fail-over, SQL Server will automatically apply the upgrade on the NodeA which is passive now. Any step by step documentation will be helpful.
    **** All the links I checked till now look ambiguous to me *****
    Thankyou.

    Hi
    Can't say I've done this but it's documented here:
    https://msdn.microsoft.com/en-us/library/cc707783(v=sql.105).aspx
    SQL Server in a clustered environment: Running
    edition upgrade on one of the nodes of SQL Server cluster is sufficient. This node can be either active or passive, and the engine does not bring the resources offline during the Edition Upgrade. After the edition upgrade it is required to either restart the
    SQL Server instance or failover to a different node.
    Upgrading the passive and failing over will be sufficient.

  • IdeaCentre B520: Separating Touch Screen Layer from Screen

    Hello,
    Unfortunately I slightly broke the Touch Screen of my PC by hitting the screen and it is now full of cracks.
    However PC is working nontherless and the screen behind the thin Touch Screen layer is intact: I would like to remove the Touch Screen layer from the screen behind it to keep using my PC as it didn't have a Touch Screen layer.
    I tried already to detach it, however I noticed that on the sides of it there are electrical contacts that link the Touch Screen to the PC.
    Here comes my question: can I dismount the Touch Screen from my PC without risking to harm the PC itself?
    Thank you in advance,
    Massimo

    Hi Shiva,
    Lenovo Customer Support (Ireland) gave me the URL that I can use to order spare parts for my PC:
    Link: https://www.medion.com/lenovoserviceshop/search?sbf=true&sn=CS00028252&x=57&y=5&lang=en
    I eventually decided to buy the touch layer and replace it myself.
    However Customer Support could not help me with identifying what is the exact name of the part I need to replace, and on the website is very hard to understand what each part is, without a picture or a proper description for it.
    PIECE TO REPLACE
    Here you have a picture of what I need:
    Link: http://www.aliexpress.com/item/100-new-original-23-0-glass-All-in-one-outside-the-screen-glass-For-l...
    I don't trust these sellers and I would like to buy this part from Lenovo.
    Now I need to understand how this part is called in the Spare Parts website I posted before. I would exclude 'Display' since the screen is actually intact (only the touch screen layer is broken).
    MY RESEARCH
    According to the Hardware Maintenance Manual of my PC
    Link: http://download.lenovo.com/consumer/desktop_pub/ideacentre_b5_b520_hmm.pdf
    the correct name for the replacement part I am looking for could be:
    B520 Front Bezel for 3D Touch - # 31-049855 (see page 27-28 for a picture, and page 67 for the part number, in the manual linked above)
    But I have to say I am not 100% sure 'that' is the part I am looking for, since the picture in the manual is not self explenatory (there is a layer in front of the Bezel that does not have a name in the manual, and that looks like what I need).
    Also, if I compare Spare parts numbers between the Hardware Maintenance Manual and the Spare Parts Website they are different. The Manual has "Service Part Numbers (FRU)", while the website has "MSN" numbers...
    So I have no clues on how to pick the right part. My guess would be one of these:
    - Housing components ; MSN: 35003197 ; Frame, stand
    - Housing components ; MSN: 35004023; Screening, mainboard
    - Housing components ; MSN: 35004032 ; Mount, display
    - Housing components ; MSN: 35004033; Front panel
    - Housing components ; MSN: 35004034; Mount, display frame
    But with such brief description and no picture, is almost impossible for me to understand...
     KR,
    Massimo

  • Touch screen stopped completely

    I have an HP Pavilion Touch Smart 14. 
    Two days ago on Aug 4th the touch pad stopped working with no warning. There were no updates to warrant any change as I have to approve all updates. 
    I have done a refresh completely swiping it back from windows 8.1 to windows 8. 
    That still did not do anything on it. I have then updated back to windows 8.1. Still no change. 
    I have then downloaded the drive for the touch screen from the HP website for my device. Still no change.
    I have done everything on the list of things to do. 
    Do touch screens just stop working? I bought this PC in 2012 and really do not want to upgrade as this PC worked fine until two days ago. 
    Tech support yes I have followed all these steps.
     http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&​dlc=en&docname=c03488148&lc=en&product=5372104&tmp​...
    I also do not have the option to go to  contol panel, pen, input, can't find any toggle or window to enable touch. 

    Hi siegelhats,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that after upgrading to Windows 8.1  your touchpad has stopped responding.  You then stated you have done a refresh you PCand uninstalled, downloaded and reinstalled the driver for the touch screen.
    Have you tried running the built in troubleshooter in Windows 8.1 to aid you. Using Automated Troubleshooting (Windows 8)
    Have you ran the The HP Support Assistant to help with updates and resolving issues.
    Just to clarify, it is the touchscreen that is not functioning, not the touchpad or clickpad.
    Would you try this link Touchpad and Touchscreen Intermittently Nonresponsive (Windows 8.1) to assist with this difficulty.
    Have you tried uninstalling the updated driver and installing the original driver. 
    HP PCs - Using Recovery Manager to Restore Software and Drivers (Windows 8)
    If this has not alleviated the issues, I suggest you do a recovery back to factory.  Performing an HP System Recovery (Windows 8)
    During the recovery process you will receive a prompt to backup your personal data to prevent loss, if you have not done one, I suggest you do one now.
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Maybe you are looking for