U410 Webcam Activation

How do I activate the webcam/camera on the IdeaPad U410 ? My F9 hotkey doesn't have the camera image on it as per the maintenance and user guides but a little box with an 'X' next to it. Purchased my U410 in January 2013 in the UK which may account for the different picture on the F9 key. Clicking on this key only makes the screen go blank. My OS is Windows 8.

hi simonj,
Thanks for using Lenovo Community Forums!
F9 is Actually the Screen ON/OFF
Webcam is Already ON on default, You will Need a Camera Software to Launch it like Skype to view it.
On some Lenovo Models there is a toggle Switch for webcam and that was Fn+Esc.
But it will not launch an application to view it it is just an on and Off, you would still need an application,
For Additional Info about your Fn Keys
Best Regards
Solid Cruver
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Webcam active?

Hi Folks,
first of all sorry for my bad english
I made a project with Flash CS3 and AS3 about taking live
snapshot from webcam, encoding JPG snapshot and send to server.
Everything work fine and the result is good.
Now my problem is:
In some user cases, after they click ALLOW in the security
panel, the CAM area is full white until they will not select from
the same panel a one valid webcam driver installed.
This because they can have multiple drivers or sometime in
the MAC safari need to specified as well.
In real i know how to show that panel to let them to select,
but this means for the rest of 90% users they must select as well,
when in real is not necessary because after hit ALLOW
(unmuted=true) in most of the case is working correctly.
So if the cam is no displayed but only a white screen, a user
can take the snapshot as well and send to the server a white photo.
How i can be sure, before take a snapshot, that the cam is
really displayed and working ?
I tried a lot, consult many webpages and tutorials, but still
not clear about the concept.
I must check the ActivityEvent.ACTIVITY ?
I must check the motionDetect ? I must check what ?
I am missing some properties ?
About my source code is pretty similar to the help guide in
flash (for CAM class)
Can i have a tip with a sample code, suggestion, or some help
Really thanks in advance, it will save me a lot of
time.

Press the option key down and launch Safari.
This suspends the Resume feature.
Best.

Webcam activation problem

Hello all.
Recently i bought HP Pavilion 17-F050sm with no operating system on it,but i installed Windows 7 Ultimate (64 bit version). I downloaded all the drivers for my laptop from the official HP website. My webcam hardware is installed in the laptop but when i installed the appropriate software it didn't work. I have tried many tricks and possible solutions but none of them seem to work.Now i should contact my HP laptop provider where i bought it but i want to try to solve it without that. Could anyone please try to help me?
Thanks in advance.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are having issues finding the right Webcam Software for youre Notebook
We will surely assist you with this
Please Click here to download and install the hp recommended software for the Webcam of your Notebook
1. Download the file by clicking the Download or Obtain Software button and saving the file to a folder on your
hard drive (make a note of the folder where the downloaded file is saved).
2. Double-click the downloaded file and follow the on-screen instructions.
Incase if you have any difficulties installing the Software I strongly recommend you to contact HP Technical Support over the Phone for further assistance without any delay
If you live in the US, contact HP Here. and If you are in another part of the world, start Here.
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Help recording a webcam

Hi,
I am planning on creating an application that will need
webcam activity recorded and then uploaded to a database, I know
that flash media server will be needed, but how do I go about
recording a webcam in flash and linking it with flash media server?
Any help would be much appreciated
thanks
Gavin

Thanks!,
have found this code in the documentation, but having a
slight problem
The following example shows how to publish and record a
video, and then play it back.
/* This script publishes and records video.
The recorded file will be named "allAboutMe.flv". */
var my_nc:NetConnection = new NetConnection();
my_nc.connect("rtmp://localhost/allAboutMe/mySpeech");
var publish_ns:NetStream = new NetStream(my_nc);
publish_ns.publish("allAboutMe", "record");
publish_ns.attachVideo(Camera.get());
/* This script plays the recorded file.
Note that no publishing stream is required to play a recorded
file. */
var my_nc:NetConnection = new NetConnection();
my_nc.connect("rtmp://localhost/allAboutMe/mySpeech");
var subscribe_ns:NetStream = new NetStream(my_nc);
subscribe_ns.play("allAboutMe");
my_video.attachVideo(subscribe_ns);// my_video is a Video
object on the Stage.
For this line
my_nc.connect("rtmp://localhost/allAboutMe/mySpeech");
I am having trouble with the location, what do I need to put
in here?, When I entered admin details for fms2 I didn't enter a
server address?, what needs to go in there? and is that meaning
this code won't work at the moment?
thanks
Gavin

Know about vga driver

sir,
i hv purchased hp-d009tu laptop.
i hv installed windows 7 32 bit, i need VGA driver to make webcam active, i hv downloaded so many drivers but none of them worked.
plz give me correct VGA DRIVER for the same...
thnx.

Hi prateeek, welcome to the HP Forums. Unfortunately HP does no offer 32 bit drivers for your notebook. Windows 7 and 8 64 bit are available on the download page for your notebook: HP 14-d009tu Notebook PC Drivers
What if I Don't See My Operating System?
You can try Intel and NVidia for drivers, but since they weren't designed specifically for this notebook they will probably not work properly.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

V7.0.0.100 on Win7 - video button IN current call ...

I'll be IN a call, individual or group, flawless connection, and someone decides to switch to video. Fine, I can see them in video but they can't see me. On my end the video camera button is ghosted. If I go to Tools/Options/VideoSettings, after a moment it brings in a live view of me on my webcam. Returning to the call window, the button is still ghosted, so people cannot see me. Quitting the conversation and returning doesn't help, neither does rebooting the whole Skype program. BTW, in the Tools/Options/VideoSettings I have it set to Contacts-only but changing it to Anyone doesn't help. BTW#2, yes we are all in each other's Contact lists. Another thing, this is only true around 90% of the time, the other 10% it works fine. Is there some kind of toggle on my side? Could it be some toggle in the call HOST's settings?

Thanks for sharing your feedback and coming back to confirm video calls are working in general.
The icon on the button indeed should reflect "Webcam not activated" / "Webcam activated". If you move your mouse cursor above the button the tooltip should state what the button does in each state.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Flash Crashes when activating WebCam

I'm having a problem across all 3 browsers (IE, FF and Chrome) where Flash will crash when I try activating the camera for recording video (and audio).
It doesn't seem to matter what webcam I have installed (I've a few to choose from) and even crashes when there isn't a webcam installed.
It seems to be failing when doing a search for an active video source.
When IE crashes I get this data for the Error signature.
EventType : BEX     P1 : iexplore.exe     P2 : 8.0.6001.18702     P3 : 49b3ad2e
P4 : unknown     P5 : 0.0.0.0     P6 : 00000000     P7 : 06371370
P8 : c0000005     P9 : 00000008
I installed and ran Adobe Flash Media Live encoder - and it doesn't crash so it's something about the browser plug-ins that's failing.
Any suggestions?

I have the same problem. As soon as the prompt comes up asking for permission to access camera, I click allow, then crash. Every time. Every browser.

WVC54GCA can't connect with Active Webcam

No matter what I do I just can't get the WVC54GCA to make a basic connection in PY Software Active Webcam. I've searched this forum and the entire web and see some similar posts. Can someone confirm that at this point it is just compatible with this software so I will stop trying. I've got a static IP address and have also tried using port 1024 after enabling it, in case the default port 80 was the issue. I have a Linksys wireless g router as well. If there are settings in the router I need to change, I'd like to know that.
I have confirmed that the camera itself does work with the included monitoring software and can also administer it ok from it's web page.
Thanks - Greg

First thing I should say is that I'm brand new to the forum and just mistakenly accepted your reply as the solution, which it is not for me. A coupel of follow up questions for you. I'm new to this camera and Active Webcam, the recent verison is 11.4. I'm wondering why you are quoting 9.x since that would be a very old version by now. In addtion to that, what do you mean by supports this model? This model is not in the drop-down list of camera's for this sofware, at least in the new version. Are you saying it was in the drop-down list before and they have actually removed it?
Regardless, I think I've learned my lesson and will not use Active Webcam as it seems to be so much of a hassle. I searched a lot last night and am trying out Webcam Monitor / Security Monitor Pro. This software already has a superior user interface (matters a lot to me) and natively supported this camera immedately without any problem.
Thanks - Greg

Mi webcam no se activa cuando realizo una videollamada en Facebook

mi webcam no se activa cuando realizo una videollamada en Facebook funciona bien en facetime y en photo booth pero en facebook no que puedo hacer?

Buscar | Servicio de ayuda de Facebook

Adobe Flash 10.1 web Player Crashes when Activating Webcam

Hi Everyone,
I installed 10.1 Adobe Flash Web Player for Firefox, IE, and Chrome. We have applications we use where it activates the webcam and the mic and now when I click accept the flash player always crashes. I have made all the changes asked of me from the support forum including uninstalling the flash player and reinstalling it. I also tried installing the 64bit flash player and using IE 64 bit on my laptop and it still crashes. It prompts you to allow flash to activate my mic and webcam and when I click accept it always crashes. This did not happen with the previous version of flash. I have looked for new drivers for my computer and there are none, I have tried so many times to fix this with no luck. Can anyone please help me as I did not have this issue until 10.1.
I am running Windows 7 64 bit. I also am running firefox 32bit and IE 64bit and none of them work. I have uninstalled the 10.1 flash player and reinstalled it with no luck. Please let me know what to do. I even did the firefox (-1) option to shut of the firefox flash protection they have. Please please please help this is very frustrating. Thanks!

Hello there.
If you're having a problem with a specific plugin, you need to contact its author for support. If you have problems with all your plugins, then it's a different matter. Is that the case?

Webcam not active in tochsmart video application

when i start my touchsmart video application the webcam button on bottom of screen will not highlight or not activate on my hp IQ500

I'm having the exact same problem and have figured out what caused it for me.
VISTA Service Pack 2 caused my issue.
Restore your computer back to before the Vista SP2 and your webcam will work again.
Hope this helps ... I have an IQ506 and that's what worked for me, and I currently have a post trying to resolve this as well.
I believe the only fix will be an update by HP to correct the conflict.

Activating / Deactivating webcameras with actionscript

Hi there. My customer has a small LAN and he asked me to
connect them also through a webcam, so, everytime I press a button,
the camera turns on at both sides (the two computers) and when
conversation comes to end, you just click on another button and pc
goes to sleep or goes back to main menu... Any idea ? thanx in
advance !

At a minimum you would need Flash media server (FMS) . FMS
uses a form of actionscript as well. So you need to script an app
for that as well as the flash clients. There's probably some
existing code in the demo/samples that you could adapt, but it
would require some work there. Search in Adobe.com for FMS.
Also to turn on webcams, I believe you need to show the
settings panel from actionscript (or it would happen automatically
each time you try to use the webcam) and get the consent of the
client at each end.
For a small LAN it seems like a lot of work and (if using
FMS, expense - there is an open source option, but it requires java
programming I think).
For actionscript settings panel info use this as a starting
point.
http://livedocs.adobe.com/flash/8/main/00002728.html#wp461026

Active X or appropriate Webcam software

This questions seems to have been visited a while ago without a resolution. I am checking whether developments have taken place since.
I am attempting to view feed from a web cam via a router. The system works perfectly well via a windows machine. It uses Active X.
However on the mac, I haven't been able to find a solution as there is no active x available. I don't know if there is another software available that can substitiute for active x. I have tried to run url through Quicktime and VLC without success.
Thanks for your assistance.
Message was edited by: kap_australia

Hi Anthony
Apple does not support Active X though.
For clarification, ActiveX is Microsoft proprietary software unavailable to the Mac platform It was Microsoft's decision to preclude the Mac OS from accessing content.
With regard to your question, this thread implies Mac OK/Windows not. Perhaps you'll find something at that thread to answer your question.

Activating Webcam causes Flash to crash

Whenever I try to use my webcam with anything involving Flash, i.e. the youtube Webcam uploader, it crashes everything Flash related. It even crashes if I go to the Adobe flash test page and go to the "settings" in flash, and click the webcam tab. has happened ever since I installed webcamXP, but continued even after uninstalling. I've reinstalled Flash and Firefox, using the uninstaller and even going to my Appdata folder and making sure all remnants were deleted. I don't know how to get a crash report to post here, so if someone could help with that, I'd appreciate it, unless they know the solution off hand.

You should be able to remove it from your Control panel.
There's an entire forum for this software: http://www.networkcamerareviews.com/forums/about1545.html

Kernel 3.16 webcam shows black image

I have a Cisco VTCamera3 (a rebadged Logitech Quickcam Pro 9000). After upgrading to 3.16 the camera always displays a black picture. I tried downgrading to 3.15.8-1 and it functioned properly. Some debug info on 3.16:
lsusb:
Bus 003 Device 003: ID 046d:0822 Logitech, Inc.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 03eb:21fe Atmel Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c52e Logitech, Inc. MK260 Wireless Combo Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-i686-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:48:39 CEST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f6affff] usable
[ 0.000000] BIOS-e820: [mem 0x000000003f6b0000-0x000000003f6bbfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000003f6bc000-0x000000003f6befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000003f6bf000-0x000000003fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: CompuLab SBC-FITPC2/SBC-FITPC2, BIOS NAPA0001.86C.0000.D.0912241315 12/24/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f6b0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f85f0-0x000f85ff] mapped at [c00f85f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c008c000] 8c000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x01798000, 0x01798fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37972000-0x37cb0fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x374bf000-0x377fd67b]
[ 0.000000] Move RAMDISK from [mem 0x37972000-0x37cb067b] to [mem 0x374bf000-0x377fd67b]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000F85C0 000024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 0x3F6B7D4B 000064 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x3F6BBDB0 0000F4 (v03 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: DSDT 0x3F6B85A4 003788 (v01 INTEL POULSBO 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 0x3F6BEFC0 000040
[ 0.000000] ACPI: HPET 0x3F6BBEA4 000038 (v01 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: MCFG 0x3F6BBEDC 00003C (v01 INTEL POULSBO 06040000 INTC 00000032)
[ 0.000000] ACPI: TCPA 0x3F6BBF18 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
[ 0.000000] ACPI: TMOR 0x3F6BBF4A 000026 (v01 PTLTD 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 0x3F6BBF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x3F6BBFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 0x3F6B7DAF 0004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x3f6affff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0008ffff]
[ 0.000000] node 0: [mem 0x00100000-0x3f6affff]
[ 0.000000] On node 0 totalpages: 259647
[ 0.000000] free_area_init_node: node 0, pgdat c161c180, node_mem_map f6ccf020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3983 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32434 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d0000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f6cad000 s33344 r0 d24000 u57344
[ 0.000000] pcpu-alloc: s33344 r0 d24000 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257871
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=070ce34b-ebf5-4f85-8483-3a7a20f370d3 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2078072 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6b0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1016312K/1038588K available (4512K kernel code, 483K rwdata, 1328K rodata, 568K init, 824K bss, 22276K reserved, 129736K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1630000 - 0xc16be000 ( 568 kB)
.data : 0xc146843a - 0xc162ec80 (1818 kB)
.text : 0xc1000000 - 0xc146843a (4513 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1596.099 MHz processor
[ 0.003351] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.20 BogoMIPS (lpj=5320330)
[ 0.003361] pid_max: default: 32768 minimum: 301
[ 0.003381] ACPI: Core revision 20140424
[ 0.013368] ACPI: All ACPI Tables successfully acquired
[ 0.014588] Security Framework initialized
[ 0.014600] Yama: becoming mindful.
[ 0.014633] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014640] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.015241] Initializing cgroup subsys memory
[ 0.015306] Initializing cgroup subsys devices
[ 0.015330] Initializing cgroup subsys freezer
[ 0.015341] Initializing cgroup subsys net_cls
[ 0.015356] Initializing cgroup subsys blkio
[ 0.015413] CPU: Physical Processor ID: 0
[ 0.015418] CPU: Processor Core ID: 0
[ 0.015428] mce: CPU supports 5 MCE banks
[ 0.015446] CPU0: Thermal monitoring enabled (TM1)
[ 0.015467] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
tlb_flushall_shift: 6
[ 0.015645] Freeing SMP alternatives memory: 16K (c16be000 - c16c2000)
[ 0.016980] ftrace: allocating 19356 entries in 38 pages
[ 0.030202] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.030592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063850] smpboot: CPU0: Intel(R) Atom(TM) CPU Z530 @ 1.60GHz (fam: 06, model: 1c, stepping: 02)
[ 0.066666] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.066666] ... version: 3
[ 0.066666] ... bit width: 40
[ 0.066666] ... generic registers: 2
[ 0.066666] ... value mask: 000000ffffffffff
[ 0.066666] ... max period: 000000007fffffff
[ 0.066666] ... fixed-purpose events: 3
[ 0.066666] ... event mask: 0000000700000003
[ 0.090228] CPU 1 irqstacks, hard=f651a000 soft=f651c000
[ 0.090235] x86: Booting SMP configuration:
[ 0.090240] .... node #0, CPUs: #1
[ 0.006666] Initializing CPU#1
[ 0.103539] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103581] x86: Booted up 1 node, 2 CPUs
[ 0.103588] smpboot: Total of 2 processors activated (6386.41 BogoMIPS)
[ 0.104339] devtmpfs: initialized
[ 0.104339] PM: Registering ACPI NVS region [mem 0x3f6bc000-0x3f6befff] (12288 bytes)
[ 0.108614] pinctrl core: initialized pinctrl subsystem
[ 0.108714] RTC time: 7:33:09, date: 08/15/14
[ 0.108880] NET: Registered protocol family 16
[ 0.109277] cpuidle: using governor ladder
[ 0.109285] cpuidle: using governor menu
[ 0.109453] ACPI: bus type PCI registered
[ 0.109462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.109717] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.109726] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.109730] PCI: Using MMCONFIG for extended config space
[ 0.109734] PCI: Using configuration type 1 for base access
[ 0.120624] ACPI: Added _OSI(Module Device)
[ 0.120632] ACPI: Added _OSI(Processor Device)
[ 0.120637] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.120642] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.125588] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.126377] ACPI: Dynamic OEM Table Load:
[ 0.126393] ACPI: SSDT 0xF65D8800 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.127453] ACPI: Dynamic OEM Table Load:
[ 0.127465] ACPI: SSDT 0xF64B3300 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.333424] ACPI: Interpreter enabled
[ 0.333445] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.333457] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.333495] ACPI: (supports S0 S3 S4 S5)
[ 0.333500] ACPI: Using IOAPIC for interrupt routing
[ 0.333591] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.335545] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.345331] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.345349] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.345365] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.345666] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c0000-0x000dffff] (conflicts with reserved [mem 0x000d0000-0x000fffff])
[ 0.346080] PCI host bridge to bus 0000:00
[ 0.346090] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.346098] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.346104] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.346111] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.346118] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.346124] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.346131] pci_bus 0000:00: root bus resource [mem 0x3f800000-0xfebfffff]
[ 0.346154] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
[ 0.346457] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
[ 0.346488] pci 0000:00:02.0: reg 0x10: [mem 0xd0080000-0xd00fffff]
[ 0.346503] pci 0000:00:02.0: reg 0x14: [io 0x1800-0x1807]
[ 0.346519] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff]
[ 0.346534] pci 0000:00:02.0: reg 0x1c: [mem 0xd0040000-0xd007ffff]
[ 0.346889] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
[ 0.346918] pci 0000:00:1b.0: reg 0x10: [mem 0xd0010000-0xd0013fff 64bit]
[ 0.347015] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.347276] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
[ 0.347374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.347635] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400
[ 0.347731] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.347996] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
[ 0.348049] pci 0000:00:1d.0: reg 0x20: [io 0x1820-0x183f]
[ 0.348215] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.348382] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
[ 0.348435] pci 0000:00:1d.1: reg 0x20: [io 0x1840-0x185f]
[ 0.348591] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.348752] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
[ 0.348804] pci 0000:00:1d.2: reg 0x20: [io 0x1860-0x187f]
[ 0.348963] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.349140] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
[ 0.349176] pci 0000:00:1d.7: reg 0x10: [mem 0xd0014000-0xd00143ff]
[ 0.349312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.349417] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.349582] pci 0000:00:1e.0: [8086:811c] type 00 class 0x080501
[ 0.349603] pci 0000:00:1e.0: reg 0x10: [mem 0xd0014400-0xd00144ff]
[ 0.349876] pci 0000:00:1e.1: [8086:811d] type 00 class 0x080501
[ 0.349898] pci 0000:00:1e.1: reg 0x10: [mem 0xd0014800-0xd00148ff]
[ 0.350198] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
[ 0.350489] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
[ 0.350541] pci 0000:00:1f.1: reg 0x20: [io 0x1810-0x181f]
[ 0.350566] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.350572] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.350579] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.350585] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.350978] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.351011] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.351050] pci 0000:02:00.0: reg 0x18: [mem 0xd0404000-0xd0404fff 64bit pref]
[ 0.351076] pci 0000:02:00.0: reg 0x20: [mem 0xd0400000-0xd0403fff 64bit pref]
[ 0.351096] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.351212] pci 0000:02:00.0: supports D1 D2
[ 0.351218] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.351286] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.356707] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.356718] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.356729] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff pref]
[ 0.356955] acpiphp: Slot [1] registered
[ 0.356996] pci 0000:03:00.0: [1814:3090] type 00 class 0x028000
[ 0.357027] pci 0000:03:00.0: reg 0x10: [mem 0xd0100000-0xd010ffff]
[ 0.357234] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.363366] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.363379] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.363409] pci_bus 0000:00: on NUMA node 0
[ 0.363678] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.363843] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.364007] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 0.364168] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.364330] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.364493] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.364654] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 0.364815] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.365795] ACPI: Enabled 6 GPEs in block 00 to 1F
[ 0.365921] ACPI : EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[ 0.366121] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.366121] vgaarb: loaded
[ 0.366121] vgaarb: bridge control possible 0000:00:02.0
[ 0.366121] PCI: Using ACPI for IRQ routing
[ 0.374482] PCI: pci_cache_line_size set to 64 bytes
[ 0.374548] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 0.374555] e820: reserve RAM buffer [mem 0x3f6b0000-0x3fffffff]
[ 0.374975] NetLabel: Initializing
[ 0.374981] NetLabel: domain hash size = 128
[ 0.374984] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.375016] NetLabel: unlabeled traffic allowed by default
[ 0.375083] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.375092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.375103] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.376726] Switched to clocksource hpet
[ 0.393251] pnp: PnP ACPI init
[ 0.393321] ACPI: bus type PNP registered
[ 0.393841] system 00:00: [mem 0xfd000000-0xfd003fff] has been reserved
[ 0.393851] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.393859] system 00:00: [mem 0xfed00000-0xfed3ffff] could not be reserved
[ 0.393866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.393873] system 00:00: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.393885] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394501] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.394510] system 00:01: [io 0x8080] has been reserved
[ 0.394518] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.394526] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.394533] system 00:01: [io 0x1640-0x164f] has been reserved
[ 0.394542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394699] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.394731] pnp: PnP ACPI: found 3 devices
[ 0.394735] ACPI: bus type PNP unregistered
[ 0.438276] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x001fffff] to [bus 02] add_size 400000
[ 0.438291] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.438300] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000
[ 0.438319] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.438327] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[ 0.438334] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.438351] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x404fffff]
[ 0.438361] pci 0000:00:1c.1: BAR 15: assigned [mem 0x40500000-0x406fffff pref]
[ 0.438372] pci 0000:00:1c.1: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.438382] pci 0000:02:00.0: BAR 6: assigned [mem 0xd0420000-0xd043ffff pref]
[ 0.438389] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.438397] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.438409] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x404fffff]
[ 0.438418] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd04fffff pref]
[ 0.438428] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.438436] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.438446] pci 0000:00:1c.1: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.438455] pci 0000:00:1c.1: bridge window [mem 0x40500000-0x406fffff pref]
[ 0.438467] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.438474] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.438480] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.438487] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
[ 0.438493] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[ 0.438500] pci_bus 0000:00: resource 9 [mem 0x3f800000-0xfebfffff]
[ 0.438507] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.438513] pci_bus 0000:02: resource 1 [mem 0x40000000-0x404fffff]
[ 0.438520] pci_bus 0000:02: resource 2 [mem 0xd0400000-0xd04fffff pref]
[ 0.438527] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.438533] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.438540] pci_bus 0000:03: resource 2 [mem 0x40500000-0x406fffff pref]
[ 0.438612] NET: Registered protocol family 2
[ 0.439143] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.439193] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.439252] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.439314] TCP: reno registered
[ 0.439321] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.439339] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.439476] NET: Registered protocol family 1
[ 0.439528] pci 0000:00:02.0: Boot video device
[ 0.441145] PCI: CLS 64 bytes, default 64
[ 0.441295] Unpacking initramfs...
[ 0.602517] Freeing initrd memory: 3324K (f74bf000 - f77fe000)
[ 0.602615] Simple Boot Flag at 0x36 set to 0x1
[ 0.603079] apm: BIOS not found.
[ 0.603206] Scanning for low memory corruption every 60 seconds
[ 0.604344] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.605195] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.611989] zbud: loaded
[ 0.612366] VFS: Disk quotas dquot_6.5.2
[ 0.612508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.613054] msgmni has been set to 1738
[ 0.613245] Key type big_key registered
[ 0.613664] bounce: pool size: 64 pages
[ 0.613814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.613974] io scheduler noop registered
[ 0.613983] io scheduler deadline registered
[ 0.614190] io scheduler cfq registered (default)
[ 0.615077] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615147] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615277] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.615281] vesafb: scrolling: redraw
[ 0.615287] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.615322] vesafb: framebuffer at 0x3f800000, mapped to 0xf8080000, using 3072k, total 3072k
[ 0.658750] Console: switching to colour frame buffer device 128x48
[ 0.701730] fb0: VESA VGA frame buffer device
[ 0.701813] intel_idle: MWAIT substates: 0x3020220
[ 0.701830] intel_idle: v0.4 model 0x1C
[ 0.701835] intel_idle: lapic_timer_reliable_states 0x2
[ 0.701850] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.702245] GHES: HEST is not enabled!
[ 0.702301] isapnp: Scanning for PnP cards...
[ 1.015472] isapnp: No Plug & Play device found
[ 1.015659] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.017319] rtc_cmos 00:02: RTC can wake from S4
[ 1.017616] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.017665] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.017789] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.018106] TCP: cubic registered
[ 1.018654] NET: Registered protocol family 10
[ 1.019221] NET: Registered protocol family 17
[ 1.019774] Using IPI No-Shortcut mode
[ 1.020264] registered taskstats version 1
[ 1.021107] Magic number: 10:907:571
[ 1.021227] rtc_cmos 00:02: setting system clock to 2014-08-15 07:33:10 UTC (1408087990)
[ 1.021447] PM: Hibernation image not present or could not be loaded.
[ 1.021963] Freeing unused kernel memory: 568K (c1630000 - c16be000)
[ 1.022039] Write protecting the kernel text: 4516k
[ 1.022118] Write protecting the kernel read-only data: 1332k
[ 1.042672] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 1.047350] systemd-udevd[47]: starting version 215
[ 1.128087] ACPI: bus type USB registered
[ 1.128193] usbcore: registered new interface driver usbfs
[ 1.128242] usbcore: registered new interface driver hub
[ 1.131091] usbcore: registered new device driver usb
[ 1.136802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.138463] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.138464] sdhci: Secure Digital Host Controller Interface driver
[ 1.138470] sdhci: Copyright(c) Pierre Ossman
[ 1.138952] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.138992] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.139014] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.139096] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.140072] hub 1-0:1.0: USB hub found
[ 1.140115] hub 1-0:1.0: 2 ports detected
[ 1.141184] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.141220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.141244] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.141336] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.142401] hub 2-0:1.0: USB hub found
[ 1.142448] hub 2-0:1.0: 2 ports detected
[ 1.142849] ehci-pci: EHCI PCI platform driver
[ 1.143132] sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:811c] (rev 7)
[ 1.143593] mmc0: no vqmmc regulator found
[ 1.143603] mmc0: no vmmc regulator found
[ 1.144215] mmc0: SDHCI controller on PCI [0000:00:1e.0] using DMA
[ 1.144342] sdhci-pci 0000:00:1e.1: SDHCI controller found [8086:811d] (rev 7)
[ 1.144775] mmc1: no vqmmc regulator found
[ 1.144785] mmc1: no vmmc regulator found
[ 1.149171] mmc1: SDHCI controller on PCI [0000:00:1e.1] using DMA
[ 1.150518] SCSI subsystem initialized
[ 1.150786] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.150821] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 1.150868] ehci-pci 0000:00:1d.7: debug port 1
[ 1.154859] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.154942] ehci-pci 0000:00:1d.7: irq 21, io mem 0xd0014000
[ 1.157028] libata version 3.00 loaded.
[ 1.163430] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.165088] hub 3-0:1.0: USB hub found
[ 1.165478] hub 3-0:1.0: 8 ports detected
[ 1.190391] hub 1-0:1.0: USB hub found
[ 1.190446] hub 1-0:1.0: 2 ports detected
[ 1.213717] hub 2-0:1.0: USB hub found
[ 1.213767] hub 2-0:1.0: 2 ports detected
[ 1.215098] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.215132] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.215156] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.215255] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.216331] hub 4-0:1.0: USB hub found
[ 1.216380] hub 4-0:1.0: 2 ports detected
[ 1.217636] pata_sch 0000:00:1f.1: version 0.2
[ 1.227175] scsi0 : pata_sch
[ 1.232071] scsi1 : pata_sch
[ 1.232428] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 1.232438] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 1.390862] ata1.00: ATA-8: WDC WD10JPVT-75A1YT0, 01.01A01, max UDMA/133
[ 1.390872] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.403865] ata1.00: configured for UDMA/100
[ 1.404180] scsi 0:0:0:0: Direct-Access ATA WDC WD10JPVT-75A 1A01 PQ: 0 ANSI: 5
[ 1.581479] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.581491] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.581771] sd 0:0:0:0: [sda] Write Protect is off
[ 1.581781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.581883] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.664161] sda: sda1 sda2 sda3 sda4
[ 1.665842] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.730112] usb 3-5: new high-speed USB device number 3 using ehci-pci
[ 2.217577] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.363429] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 2.770100] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[ 3.227031] random: nonblocking pool is initialized
[ 4.449504] systemd[1]: Cannot add dependency job for unit webmin.service, ignoring: Unit webmin.service failed to load: No such file or directory.
[ 4.894931] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 5.277820] systemd-udevd[134]: starting version 215
[ 6.002648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 6.002665] ACPI: Power Button [PWRB]
[ 6.003023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.003036] ACPI: Power Button [PWRF]
[ 6.003053] ACPI Error: Could not enable PowerButton event (20140424/evxfevnt-212)
[ 6.003066] ACPI Warning: Could not enable fixed event - PowerButton (2) (20140424/evxface-643)
[ 6.030237] button: probe of LNXPWRBN:00 failed with error -22
[ 6.033338] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.115121] ACPI: Battery Slot [BAT0] (battery absent)
[ 6.115639] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.115801] ACPI: Battery Slot [BAT2] (battery absent)
[ 6.118719] ACPI: AC Adapter [ADP1] (on-line)
[ 6.213331] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.213438] ACPI: Thermal Zone [TZ00] (0 C)
[ 6.214248] ACPI: Invalid active0 threshold
[ 6.215000] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.215009] ACPI: Thermal Zone [TZ01] (0 C)
[ 6.253463] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 6.404542] Linux agpgart interface v0.103
[ 6.440752] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211
[ 6.484136] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211
[ 6.484425] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.841436] lirc_dev: IR Remote Control driver registered, major 251
[ 6.894503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.894542] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.894948] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
[ 6.895707] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xf8010000, 00:01:c0:07:09:e1, XID 081000c0 IRQ 40
[ 6.895721] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 6.931838] media: Linux media interface: v0.10
[ 6.941713] [drm] Initialized drm 1.1.0 20060810
[ 6.980804] Linux video capture interface: v2.00
[ 7.085556] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.147784] systemd-udevd[136]: renamed network interface eth0 to enp2s0
[ 7.207476] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.207539] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 7.210858] usbcore: registered new interface driver usbhid
[ 7.210868] usbhid: USB HID core driver
[ 7.276297] cfg80211: Calling CRDA to update world regulatory domain
[ 7.281908] uvcvideo: Found UVC 1.00 device Cisco VTCamera3 (046d:0822)
[ 7.293193] lirc_igorplugusb: module is from the staging directory, the quality is unknown, you have been warned.
[ 7.294637] lirc_igorplugusb 4-2:1.0: lirc_dev: driver lirc_igorplugusb registered at minor = 0
[ 7.297214] input: Cisco VTCamera3 as /devices/pci0000:00/0000:00:1d.7/usb3/3-5/3-5:1.0/input/input3
[ 7.298031] usbcore: registered new interface driver uvcvideo
[ 7.298040] USB Video Class driver (1.1.1)
[ 7.316174] lirc_igorplugusb[2]: Cesko AVR309:USB to UART protocol converter (simple) on usb4:2
[ 7.320869] acpi device:04: registered as cooling_device2
[ 7.321309] usbcore: registered new interface driver lirc_igorplugusb
[ 7.326089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/0003:046D:C52E.0001/input/input4
[ 7.330340] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 7.338490] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/0003:046D:C52E.0002/input/input5
[ 7.339465] hid-generic 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 7.374033] acpi device:05: registered as cooling_device3
[ 7.374687] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 7.377741] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.377753] [drm] No driver support for vblank timestamp query.
[ 7.381109] mousedev: PS/2 mouse device common for all mice
[ 7.411410] gma500 0000:00:02.0: Found no modes on the lvds, ignoring the LVDS
[ 7.526900] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3071, rev 0213 detected
[ 7.537972] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 7.593300] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.623731] systemd-udevd[139]: renamed network interface wlan0 to wls1
[ 7.644147] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[ 7.644846] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 1
[ 7.751280] usb 3-5: Warning! Unlikely big volume range (=6400), cval->res is probably wrong.
[ 7.751293] usb 3-5: [5] FU [Mic Capture Volume] ch = 1, val = 1536/7936/1
[ 7.752268] usbcore: registered new interface driver snd-usb-audio
[ 8.151377] checking generic (3f800000 300000) vs hw (3f800000 7bf000)
[ 8.151388] fb: switching to psbdrmfb from VESA VGA
[ 8.151461] Console: switching to colour dummy device 80x25
[ 8.152037] fbcon: psbdrmfb (fb0) is primary device
[ 8.280125] Adding 1000444k swap on /dev/sda2. Priority:-1 extents:1 across:1000444k FS
[ 8.372453] Console: switching to colour frame buffer device 200x56
[ 8.451827] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 8.451834] gma500 0000:00:02.0: registered panic notifier
[ 8.470079] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[ 8.596213] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0
[ 8.596582] sound hdaudioC1D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 8.596594] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.596603] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.596611] sound hdaudioC1D0: mono: mono_out=0x0
[ 8.596619] sound hdaudioC1D0: dig-out=0x1e/0x0
[ 8.596625] sound hdaudioC1D0: inputs:
[ 8.596636] sound hdaudioC1D0: Front Mic=0x19
[ 8.596645] sound hdaudioC1D0: Rear Mic=0x18
[ 8.596654] sound hdaudioC1D0: Line=0x1a
[ 9.039493] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.118207] systemd-journald[115]: Received request to flush runtime journal from PID 1
[ 9.636740] sound hdaudioC1D0: hda-codec: out of range cmd 0:20:400:ffff7fff
[ 9.648467] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input7
[ 9.650192] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 9.650698] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 9.651188] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 9.652556] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 9.653112] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 9.653665] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 9.654165] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 10.708548] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.755946] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.871041] tun: Universal TUN/TAP device driver, 1.6
[ 10.871052] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 10.895529] nf_conntrack version 0.5.0 (15940 buckets, 63760 max)
[ 11.861428] r8169 0000:02:00.0 enp2s0: link down
[ 11.861445] r8169 0000:02:00.0 enp2s0: link down
[ 11.861508] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 14.004913] r8169 0000:02:00.0 enp2s0: link up
[ 14.004936] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Please help.

R00KIE wrote:
It seems this was reported upstream(??).
http://sourceforge.net/p/linux-uvc/mail … nth=201408
Nothing new on linux-uvc-devel mailing list since Aug 7.
I followed some other instructions, attempted to adjust the exposure value but the problem persisted:
http://b.wardje.eu/2012/01/webcam-shows … linux.html
Last edited by albertnguyen (2014-08-22 09:09:48)

U410 Webcam Activation

Similar Messages

Maybe you are looking for