U510 Intel my wifi dash board - WS 8, no sensitivity option
All
I am running WS 8.1 64bit on my U510 idealpad with limited WIFI connectivity due too poor sensitivity of the device.
I also have a dell e560 laptop which picks up and displays many other wifi routers which my intel centrino 2230 does not display ! I download the Intel My wifi dashboard but without success as apparently it does work with ms 8 .
How or where are the wifi profiles stored as I do not see them on the Control panel sharing menu. Any ideas
thanks
I have not received any replaies although many have viewed my post ? Am i to beieve no one else has has had this issue ? I do not think as the forum is full of wifi problems with lenovo product.
Similar Messages
-
Intel 5150 WiFi/WiMax Adapter doesnt work with 7?
I've tried everything. I've spent hours on Intel's site, and let me just say that was an absoulte joke. You have to search deep into their search thing to find the windows 7 driver for it. Then it doesn't work.
I've been to Dell's website (I'm running a Dell Studio XPS 16) and I can download it, but then I get an error saying I cannot downgrade versions.
The computer recognizes the WiMax portion, but not as WiMax. It just says there is an error with "The WiMax adapter" but it doesn't actually know what it is. Same run around with the drivers in this case as well. The WiFi light on the front of the computer does not come on. My bluetooth one does, but not the WiFi. I've tried switching in on and off with no luck as well.
So far Intel and Microsoft, I'm not impressed. Looks like my desktop will be staying XP and it's a good thing I added this as a second OS to my laptop because it sure won't last long with me hunched under the desk like this to get internet. Can anyone help me out?Hi, Thanks for the reply Nano Warp.
Believe me, I have tried absolutely EVERYTHING to get my wifi card working.
Thank you for assuming that I didn't take the '10 seconds' to 'do my research and preparation' before installing 7. I have spent literally MONTHS trying to figure out what is wrong with this. Because you jumped to such a quick conclusion on a couple short posts from me, I'll explain it all and maybe, just maybe I can get it resolved.
July 09: Ordered my new oh-so-special laptop for college. I got it and aside from the occasional glitch, and my dislike toward vista (for reasons I won't go into now) it did what I needed except for the WiFi which has some SERIOUS issues. I spend hours on the phone and with Dell's live support trying to resolve it with no luck. Decided I would just suck it up, and hope to god I didn't lose/need internet when working on some of my assignments.
October 09: Got a hold of my very own copy of 7 and installed it in another partition on my HDD. It worked 100000X better than vista, except for the WiFi card, which it did not recognize. At all. I DID search Intel's website and downloaded, uninstalled, and reinstalled anything and everything I thought might just give me a shot at having WiFi in 7...currently the only reason I was still mainly using Vista was due to the lack of WiFi.
November 09: After WEEKS of searching for why I had no WiFi I posted this. I ordered my Intel 5300 card within the hour. Took several months and after placing three more orders with different companies I did get it ONE.
December 09: Windows Vista takes a complete and utter DUMP on me. I lost everything. School work, photos, emails. EVERYTHING. Thankfully, I had a trusty desktop running XP that I had *most* of my data backed up on.
January 2010: It's now winter break and I am between semesters. I REALLY need my laptop for internet use in my psych class for the second semester, as everything is done through the computer/internet. Tests, homework, assignment, etc. The Intel 5300 card did NOT work. At ALL. Went through the same process with the 5300 card. Even tried the second card that showed up at my door. Must have been one of the other two that I never received. Still nothing. Then again with the 5150 card. nothing. nada. squat.
It is now nearing the end of March 2010...FIVE MONTHS after installing 7 and dealing with this Intel/7 driver issue with no luck. I've tried everything from Vista drivers, 7 drivers, contacting Dell, contacting Intel, posting on message boards, forums and everything short of dropping an ___LOAD of money into this computer to get something as simple as WiFi to work. Nothing.
Currently, I am hassling and jumping between computers at home/school/library to stay on top of my psych class, and my less than a year old, $2,000 laptop is sitting in the corner collecting dust. So if you would like to say I'm dumping on 7, please let me know, and if you still feel I didn't take the '10 seconds total' to 'get there and find' what I was looking for, then by all means, let me know. At least this time you won't ASSUME, and make an ____ out of U and ME. Get it. Spells assume. ha-ha. funny funny.
If there was a "Vote as UNHELPFUL" button for your post. I WOULD HAVE PRESSED IT.
Thanks for your help,
Ryan (ryans-canyon) -
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
Error while executing the BO Dash Board
Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
HajiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
Error while running script HyperV - Dash Board - VM and Storage Report
Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommandHi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How can we show percentages in BO Dash board Manager(PMDM)
Hi ,
Please help me to find the option in Dash Board Manager to show percentages of metrics.
Regards,
TejaHello josborne,
i feel for you as a year ago i was undergoing the same problem. I was using Basler cameras for bar code reading and i was using two of them at a time. i was getting the same error. In my case the issue was resolved after much pain. i changed the PCI cards, switched between a lot of softwares and hardwares to get the required results. In the end my issue came down to the Fire wire cable. I was using a very cheap cable. Perhaps this is the only thing i can add that you might be using some non+standard fire wire cable.
perhaps you can try replacing it and then see the results.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2 -
Including an link to an help file(*.chm) in dash board
hi,
is it possible to place an *.chm file(help file) in the dash board .
i tried but OBI is not opening it up in that format.
can some one give me an solution to this.
thanks'.chm' is a Microsoft Compiled Help file that only works in Microsoft Explorer. You are advised to convert it to a friendlier format like HTML.
As per Microsoft, due to a remote code execution vulnerability, you cannot open .chm from a URL. However there are some workarounds in the link below:
http://support.microsoft.com/kb/896054
Coming back to Oracle BI, you could open the link in a separate window, and ask users to download the chm. Once downloaded locally, the chm file should work fine.
HTH,
Nilanshu -
Management Dash Board creation in SAP BI 7.0
Hi Experts,
Plz give me the construction procedure of Management Dash Board creation in SAP BI 7.0.
Any material/links/documents/suggestions with u plz share with me.
Any Pointers will really appriciated.
Thanks in advance.
Regards,
Chinna.Hi reddy
go through these help links
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/054e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
will surely helps u
Regards
Kiran
*Do assign points for helpfull answers,its the way of saying thanks in sdn
Message was edited by: ravi kiran naalla -
Integration of OBIEE Dash Boards with BPM Process
Hi ,
Could you please help me in integrating OBIEE Dash Boards with BPM . I thought of using 2 ways :
1) Integrating OBIEE with ADF First and then Integrating ADF with BPM . Its a long process but any other way if any one can help me .
2) Integrating OBIEE with BPM directly by generating webservices . but i couldnt get any options to generate the webservices for OBIEE .
Can anyone please guide me on this .
Thank you,
Sashank P.Check these links may help you.
http://docs.oracle.com/cd/E21764_01/bi.1111/e16364/actions.htm
http://gerardnico.com/wiki/ide/eclipse/eclipse_how_to_consume_a_webservice_with_wtp#the_result
http://gerardnico.com/wiki/dat/obiee/web_service -
Connecting an iPhone 4 to Intel My WiFi Technology
I have a new Dell computer that has Intel's 'My WiFi Technology' installed. This is supposed to allow wireless devices to connect to the internet via the laptop. To add a device - such as my iPhone - the program has three options: (1) WiFi Protected Setup PIN configuration, (2) WiFi Protected Setup push button configuration, or (3) manual configuration.
My question is two-fold: does my iPhone 4 with iOS 5.1 support either of the first two options, and if so, how.
If not, does anybody have an easy way to get the INCREDIBLY long and convoluted password phrase required by My WiFi Technology into the iPhone for a manual configuration.Go to the Intel My Wifi Utility on your laptop
Click Profiles
Click New
Enter a name for the profile (mydell, whatever..)
Enter a new network name for the SSID (again, something like mydell, mylaptop..)
Click the Security tab
Ensure security type is: WPA...
Select the long Wireless Security Password string and press backspace to delete.
Enter a password (8 characters is the minimum I believe,.... such as mydellpassword1, or something)
Click OK
Click Close
On your iPhone, go to Settings>General>Network
Select Other and you should see that your mydell is offered as a connection.
Select it and enter the password you created in step 9 (such as mydellpassword1) -
I activated the Intel My WiFi technology on my T510 but the system will not let me enable it. When I click on enable in the My WiFi application it never turns on. I have done everything in the KB article below.
http://forum.lenovo.com/t5/T400-T500-and-newer-T-series/T510-T410-Intel-quot-My-WiFi-quot-not-workin...
Solved!
Go to Solution.Which wireless adapter do you have?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
AppleTV and Intel My WiFi Technology + Airplay Issues
I am using a Samsung laptop and iPhone 4S and iPad Generation 3 with my Home Sharing. All home sharing is turned on and I have WEP 2 Personal security. How to get AppleTV to work with Intel My Wifi Technology? Does bluetooth has any part of the mirroring? My iPad shows the TV present to make the configuration, but then disappears once configured.
Howdy mcm145,
It sounds like there’s an issue getting your Apple TV connected to your Wi-Fi network and setting up Home Sharing. Take a look at the articles linked below, the first article will help you resolve the Wi-Fi connection issue and the second article will walk you through the process of setting up Home Sharing for your Apple TV.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections - Apple Support
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation) - Apple Support
So long,
-Jason -
Dash board and app store in the same window
And I cant use either.. Untill I deleted all the wigets and then I could use the app store... How do I get the app store to launch seperatly from my dash board in Lion..
If it says the user id and passcode is not correct then it isn't, even if you think it is. Or someone has hacked your ID and changed your password.
-
Daily Shift wise Report, Dash board reports
Dear all
With refering to the present project in 4.7 version the customer requirement is below.
1. Shift wise maintenance report - Here they are presently maintaining Section, shift, Date, From time, To time , Job descriptions, attenede by remarks.
In another coloum in same sheet they needs
From time, To time , Delay descriptions, attenede by remarks.
Then thirs is communication for next shift- there they are writing the texts which they are saying to next shift guys.
2. Another what they wants is regularly top managers wants to see the maintenance details ( prev order, down time, consumption cost etc ) in their system dash board(screen) . they are not willing to go sap. How to do this thro .Net or workflow . This is report should be fulfiiled by us.
3 Shutdown Planning report- here they are maintaining the date wise job hours in graphical form. How we can activate this
I request you please have some idea about this.Dear Nandip/Iftikar,
Dear thanks 4 ur answers. I have asked the same with our abapers , but they are new and not able to help. i have well tried with notification customer table addition in spro. but its not helping as required.
The thing is i cant prepare the specs for this report. Example for shift we can create Z table. But Processing job description, Action taken, delay reasons how i can prepare the specs.
I request you to share your Program or specs please then its better for us. please send at thennarasu_kandasami@ welspun.com
Edited by: thenna arasu on Jun 2, 2008 2:12 PM
Maybe you are looking for
-
Error while importing dump file to Oracle server
Hi All, I'm pretty new to Oracle and I need to do the following job: - import data from dump file to Oracle server - then export it into CSV format to load to our web system Oracle dump file is called EXPDAT.DMP and it is placed in the default locati
-
Can someone please help me to get to my i Tunes library? I am getting the following message when trying to access i Tunes=i Tunes. exe-System error-can't start because MSVCR 80.dll is missing-Try reinstalling program. Also i Tunes was not installed c
-
Can we call to formmail.pl from within flash?
Hi all.. there's probably a simple way to send form content to the standard formmail.pl but I need a tutorial of some sort to do it.. anyone point me in the right direction?
-
Safari 6.0.5 does not open jpeg files. Is there a preference I need to change? Or something like that?
-
I have a Frame Maker 8 file, that I opened in FM 10, and the Thai text is not rendered properly whether I use Angsana (New / UPC), Tahoma, Arial Unicode MS or DB Thai. This is what is look with Angsana (Some extra points are shown) http://www.flickr.