U510: No WiDi, and Veriface on US production models??

Lenovo - what is going on? You are selling products that either don't work properly (see the touchpad or WiFi threads), or aren't being delivered as promised (see the missing software and Widi threads).
I just got through reading the software threads and decided to take a look at my U510. According to the tech specs here, the U510 comes with Windows 8 x64, WiDi, and Veriface - none of which are present on US models of the U510 (except the Win 8, that is). In fact, the only Intel apps on my system are the driver utilites for the WiFi and HD4000, and the Intel AppUp application which appears to be nothing more than another app store.
I've decided - you can have this thing back, and the new one you're shipping me. I want nothing to do with the "new" Lenovo - your support has gone the way of Dell. Such a sad end to the IBM Thinkpads - they were once the best money could buy.
Moderator Note: Edited subject to match content.

While browsing through the dirvers area of the site yesterday looking to see if there were any updates, I discovered the Intel WiDi driver and the Intel Chipset driver - neither of which were installed by default.
Installation of the WiDi went smoothly, and appears to work, but I have not tested it yet since I don't have a WiDi receiver yet.
While installing the Intel Chipset driver package, the window reported that Intel Identity Protection had been installed. I'm still looking to see where it stuck it, and see what it can do for me. I'm going to try and find the W7 Veriface package for the Y or Z series and see if it will work on the U510 with W8 and the Intel Identity Protection loaded.

Similar Messages

Product Modelling Environment - Variant Configuration- modelling configura

Hello all,
I have a very important question for which I am trying to find answers. I ahve been researching for the last 2 days continuously
and now I kind of confused.
I need an answer tot his at the earliest possible
And I am struggling to differentiate between PME and product modelling in crm , is it the same?
When Ilook in this link ,it says;
http://help.sap.com/saphelp_crm70/helpdata/en/ed/bfb2ce6a6a46af92172c4ff901f125/frameset.htm
NOTE
This function in the WebClient user interface (UI) replaces the Product Modeling Environment (PME) application, which had to be installed separately.
What does this mean?? does this mean that modelling configurable products is different from PME?
can Product modelling be done in crm as well as ERP?
Could u please let me know
Thank you
BR
Riya

Hi Vinod,
Please find below a brief:-
A product model contains the configuration model data relevant for one product which is a server based Architecture.
-A knowledge base is a container for data and can contain many PMEs
-PME is available in Product page
-Need to insert and create a new product model and select the model and enter product related data.
-Create KB's
-Will have to define the characterstics and values and assign to class
-Product model hierarchy shows the model in tree structure.
-After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
Regds...
Arup

Product Modelling Environment - Variant Configuration

Hi Experts,
Can any one please let me know how to use PME for Variant configuration in CRM. If possible can any one please give me document or link related to PME.
Thanks in advance,
Regards
Vinod

Hi Vinod,
Please find below a brief:-
A product model contains the configuration model data relevant for one product which is a server based Architecture.
-A knowledge base is a container for data and can contain many PMEs
-PME is available in Product page
-Need to insert and create a new product model and select the model and enter product related data.
-Create KB's
-Will have to define the characterstics and values and assign to class
-Product model hierarchy shows the model in tree structure.
-After you created the hierarchy with all details you can simulate the configuration as a result titile simulator pops up where you can see the status and Variants and your current selection.
Regds...
Arup

What is difference between SAP R3 And SAP IS Mills Product

HI Friends
What is difference between SAP R3 And SAP IS Mills Product
What are the futures are availables in IS MIlls
Regards

Hi,
SAP R/3 is the central enterprise version. It is not specifically designed for any inducstry sectors and it can cater many of the industry types.
Is is developed for specific industries an for SMB's (small and medium business). It will have components specifically for the industry.
The SAP Mill Products component adds sector-specific functionality to an ERP system to satisfy the complex requirements of mill industries (e.g. metal, wood, paper, textiles, construction materials, and cable sectors).
These industry segments differ from others primarily in that the materials used have a large number of characteristics and variants. The materials in the segments listed above are also predominantly area-based (e.g. paper, textiles, plastic film) or length-based (e.g. cables, piping). Account must be taken of these material characteristics throughout the entire supply chain.
To cater for the particularities of these industry segments, SAP Mill Products features processes and functions that cover the entire supply-chain cycle from product design and configuration, through planning, order processing, capacity planning and production, to final delivery. Additional functions are available in costing and inventory management. SAP Mill Products are also integrated into Quality Management, Financial Accounting, and Controlling.
Prase

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Function module for calculating planned and actual cost of production order

Hi ,
Do we have any standard function module for calculating planned and actual cost for production order?
i need to implement this in a Z-report.
Thanks
Srini

Hi,
try below function module
CRMCO_GET_PLAN_ACTUAL_COSTS
CO_IH_GET_PLANNED_COSTS_TOTAL
Regards,
Sankaran

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Family sharing if you don't want to constantly update your devices and make your apple products redundant

Hi everyone,
My kids have taken over our older Apple devices - i.e. iPhone and iPad - and have currently got our old stuff, apps, emails etc on their devices. I want to start these devices on a fresh start - although they've got a selected few apps that they say would be a disaster to start up again if we deleted everything.
If I go for family sharing, I believe everything has to be IOS 8 or better (probably IOS 9 tomorrow and IOS 10 the day after tomorrow - argh...). But if I upgrade the older devices (if they can upgrade at all!), they will be awfully slow or not work at all...
Apple shop recently suggested me an alternative: to buy vouchers for my kids and set-up a new apple-ID for them on each device as an alternative, although I don't have control over their purchases, but once the voucher has been used, there won't be any more purchases - only free stuff downloaded. So I don't need the kind of control that family sharing has.
All I want them to have is face-time and an own apple-ID on their devices - and let i.e. my sons FIFA15 app continue as he's been building his team for months on "my" old iPad before he took it over himself.
However, now I cannot set up a new apple-ID because there's no more me.com and I can't create an apple ID for them as they are too young...argh (again!) - (did I mention that argh is my favourite apple-expression the latest few years? Bring back the old times please....!).
What to do?
Yes, I know - go to the apple shop and give them more of my cash to get brand new devices that needs updating and replacement in a year and throw away the old devices and pollute the world further. I would get family sharing going yes, but I would also be a lot poorer and feel like a fool for buying more apple gear.
Any other alternative - using what we've already got?
Stop apple from constantly updating and requiring upgrades of products and inventing new stuff....? It drives me nuts - but probably I wouldn't get away with that suggestion either...
Sorry for my alt-modisch view on all this or if any of my sarcastic apple comments are putting any of you off. Appreciate any feedback or ideas from you guys.

No replies to this one?
Come on guys - whoever still likes apple products - come to their defence and show that Apple isn't totally rubbish after all????
Sarcasm aside, much appreciated if you have any tips for me...

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

I love Apple and I use all product. iPhone 3,3s,4,4s,5, iPad and Mac Air(now no more 3,3s and 4)... Only one thing I want to know is... What can I do if some one spy on my phone? How do I protect all my stuff that I put in my phone?

the only way that anyone would be able to see anything at all on your phone is if they knew your apple id password, or they were looking over your shoulder
if you are concerned that someone may know your apple id password, please change it at appleid.apple.com

I have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lo

i have iphone 3gs and last days i made upgrade 5.01, but i dont know that this version is not avaliable in brasil yet. than my iphone 3gs 32 gb no more find the wide and it be seaching the sinal. what i need to do to back to before situation. thanks a lot

iOS 5.0.1 has been out for a couple months, if not longer.
There was no delay in releasing it in any country.
So what is your issue?

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

Hello! I had Photoshop Elements (and some other products) installed on my Laptob, but lost them because of a system breakdown. Trying to install these programms again, I logged in to my account "my adobe" and immediately found my products listed there plu

Hello! I had Photoshop Elements (and some other products) installed on my Laptob, but lost them because of a system breakdown. Trying to install these programms again, I logged in to my account "my adobe" and immediately found my products listed there plus a link "download here". But clicking the link didn´t start anything. Nothing happened. How can I get my prgramms installed again?

Try using a different browser if the link did not work.
You can also try downloading thru the following page if you can find the version(s) you need...
Download and Installation Help -
https://helpx.adobe.com/download-install.html

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

I operate a windows 8, 62 bit computer. I have ordered and downloaded the following product for AU$129 Adobe Photoshop Elements 13 (Windows,English) on the understanding that it would convert PD files to word. It is not doing so. Is this a wrong order?

if you're trying to convert pdf files to word files, you want acrobat pro or acrobat standard, Buying guide | Adobe Acrobat XI Standard
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.

Photoshop CS5 can only decode fax encoded images up to 32767 pixels wide and tall

Dear Sir/Madam,
Can you please help me? I am scanning large drawings using an Xerox 6204 Large printer/scanner. The resolution is set at 600 and saved as .tif. Photoshop CS3 can open files with no problems, but CS5 gives me the following message:
"Photoshop can only decode fax encoded images up to 32767 pixels wide and tall"
I can also view with infarview and open with applications such as corel draw. Am I missing a plug-in or patch update? The same file can be opened in both Photoshop versions if I scan at resolution 300.
Your help is greatly appreciated.
All the best
Paulo

Hi Mylenium,
Many thanks for the prompt reply.
I agree with you... it's a little odd to save on fax tiff format... to be honest, it's not like we have an option on the matter... the XEROX 6204 Large Format Printer/Scanner either give us .Tif or .PDF options... Anyway's no problem with CS3 or other software like mentioned above... so even knowing it's a bit strange to use such format, still does not explain why on CS5 I get this error message. Furthermore if I open on CS3 and save as (same file name and same format .tif) I can then open on CS5!!!!
To my surprise, I did not know it was saving as a fax tif... all I get is tif. Even so if all other software including an older version of Photoshop can open it why CS5 can not? What is missing? As mentioned if scanned at 300 dpi it opens... Confused. Very confused!!
All the best
Paulo

U510: No WiDi, and Veriface on US production models??

Similar Messages

Maybe you are looking for