U510 Win 7 neu Installation Wie SSD nutzen

Hallo Leute ich habe ein Problem mit der Neuinstallation von Win 7.Kurz zur Erklärung mein Bruder hat Wín 7 direkt auf die 24 GB SSD Installiert und die ist nun voll. Also hat er mich gefragt wie das sein kann. Ich habe mich jetzt schlau gemacht und habe gelesen das man bei der Verbauten SSHD 500Gb + 24GB SSD das Windows direkt auf die HDD installiert. Aber ich habe auch sehr viel Beiträge gelesen das man da so einiges einstellen muss damit Win 7 die SSD als Cache nutzt. Da ich das auch noch nicht gemacht habe wäre ich dankbar wenn mir jemand helfen würde das die Kiste wieder läuft. Ich habe WIN 7 auf USB und auf DVD vorliegen. Ich habe bzw hatte beide Platten gelöscht und schon mal WIN 7 auf die HDD Installiert. Die SSD ist zur Zeit noch unformatiert. Das ist der Ausgangspunkt. Ich kann aber sehr gerne WIN 7 komplett neu machen da das ja nur knapp 10 Min dauert das zu installieren. Was muss ich im Bios oder so einstellen und was muss ich nach der Installation tun damit der Cache von der SSD genutzt wird. Denn so wie das jetzt ist dauert es deutlich zu lange bis das Laptop hoch fährt.Hier noch ein paar Bilder von meinem Bios so ist es jetzt eingestellt.1000 Dank für eure Hilf eim vorausGruß cartman

Bei mir in der Firma ging's bis jetzt problemlos, CS5 Projekte mit CS6 zu bearbeiten.
Zum Windows7 Kompatibilitätsproblem kann ich Dir leider nicht helfen.
Wie es sich mit 3rd Party Plugins verhält, hab ich noch nicht getestet.
Aber die Installation von CS6 lohnt sich in jedem Fall.
Zur Sicherheit kannst Du ja erstmal die 5er zusätzlich installiert lassen.
and if you write your question in english, you will definitely receive more answers...
and keep smiling

Similar Messages

Benötige nach neu installation von win 7 software download für photoshop 8

benötige nach neu installation von win 7 software download für photoshop 8

Hi there,
Download for Elements 8 is also available in the above link which Mylenium has provided. If you are unable to locate, then here is the page I have located it for you..:)
http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
Read the instructions very carefully before starting the download, else you will face an error..
Once you download the product, you can use the serial number to activate it into the full version. Please take a back-up of the media for future use.
Regards,
Jairaj

E130 - Migrate WIn 7 Pro to SSD

Hi!
I have a Lenovo Edge E130 and I have recently inserted a 128 GB SSD into the extra mSATA slot in addition to the 500 GB HDD. Now I want to migrate Win 7 Pro 64 bit and my programs from the HDD to the SSD, in order to start the laptop from the SSD only in the future. The 500 GB HDD will just be used for data storage.
However, my migration efforts from HDD to SDD so far failed I attempted it twice, using a) the migration option in Easeus Partition Master 10.2, and b) an image of partition C: from an external USB drive.
I assume that it could have failed due to the Lenovo setup of Win 7. There is a partition "Windows_7_OS" on C: and a "System_Drv" partition labeled with a "*". I don't have Win 7 installation CDs/DVDs, only those for Win 8.1, but I want to keep on using Win 7.
What do I have to do to successfully migrate Win 7 Pro 64 bit and my programs to the SSD?
Thanks for your answers!
Solved!
Go to Solution.

Dear Alex5723,
thanks a lot for this helpful link. Now that I am back to a running system and to the Windows desktop, I will go on following the suggestions for optimization of SSD performance suggested there.
But first I had to solve some other problems. Here's the story how I succeeded to migrate Win 7 and programs from an HDD to an SSD, both of which now run parallel in my Lenovo E130 with Win 7 on the SSD:
1) I installed the 128 GB SSD into the additional mSATA slot.
2) Using the existing Win 7 system on the HDD, I chose Acronis True Image 2015 (free demo version available) to save an image of partition C: (OS and programs) to an external USB drive.
3) Next I created an Acronis rescue CD.
4) I have shut down the laptop and removed the HDD.
5) I booted from the Acronis rescue CD and copied the saved image to the new SSD.
6) Then I restarted and changed the boot sequence to first boot from the SSD and started windows. This stopped after a while before getting to the desktop with a blue screen telling me Windows was not genuine (build 7601). My Win 7 Pro 64 bit is genuine (pre-installed OEM version). The problem was that the new OS was not in the C partition. Apparently, you can avoid such a screen when you don't assign a partition and a partition letter to the new SSD, so that the space on the SSD just remains unallocated. That's what I did (made the SSD a primary partition, partition letter was E). The very easy and quick solution to that problem is nicely described here: http://www.anotherwindowsblog.com/2011/02/windows-7-not-genuine-after-disk-clone.html
7) Now that my desktop is back again (everything looks and works like on the HDD before), I have shut down the laptop again and reinstalled the HDD. I went on deleting the old operating system partitions on the HDD and reallocated this space to my data storage partition, but you might prefer to do something else.
8) Next step I will take is to follow the optimization of SSD performance suggestions that are included in the instructions Alex5723 referred to:
http://www.howtogeek.com/97242/how-to-migrate-windows-7-to-a-solid-state-drive/

Re: Win XP Installation on Portege R500 12Q

Hi,
I would like to install Microsoft Win XP on my Portege R500 12Q (128GB SSD drive)
If I start the installation from CD, there is normally the possibilety to install a third party driver through pressing F6. But the problem is, that nothing happens if I press F6 in this moment (tried out more than once).
Ok if I wait i get the possibilety to specify the mass storage because installation program did not found any. If I want to install the drivers now, the only possibilety is to instal it from Drive A: (Floppy) but I dont have a floppy drive.
Over all I did not found the SSD- Driver at the Hompage but I think it is included in the Matrix Storage Manager, isn't it?
Is it really that difficult to install Win XP on a SSD? Please help me.
Thanks in advance.
greetings
Stefan

> Ok if I wait i get the possibility to specify the mass storage because installation program did not found any. If I want to install the drivers now, the only possibility is to install it from Drive A: (Floppy) but I dont have a floppy drive.
If you want to include the SATA driver using the F6 option then you HAVE TO USE the floppy disk drive. But if you dont have a USB floppy disk drive then you could use the software called nLite to include the SATA drivers into the new created XP CD.
The SATA driver is a part of the Intel Storage Manger and you can download if from here:
[Intel Storage Manger 32-bit Floppy Configuration Utility (201KB) 8.6.0.1007 |http://downloadcenter.intel.com/download.aspx?url=/17061/eng/f6flpy3286.zip&DwnldId=17061&ProductID=2101&lang=e ng ]
For details about nLite search in the internet!
> If I change the setting again in the bios I always get a blue screen, but I can not install the Matrix driver (SSD) as long as I dont change the setting and I think I dont use the possible speed of the SSD.
This is clear. You will get always a BSOD if you would change the SATA mode in the BIOS after installation of any OS. If you have installed the OS you cannot change the SATA mode in the BIOS.
But if you would like to change it again then you will have to install the OS again using the SATA drivers
Bye

NEW MAINBOARD - How can I deactivate my 'old' Computer (to register a new Computer /MB) ? - Neues Mainboard-Wie deaktiviert man alten Computer ?

Neues Mainboard- Wie lösche ich die Lizenz auf dem 'alten' Computer - New Mainboard. how can I deactivate the lycence from my old Computer ?
Please help- no adaquate adobe-support available !

markus u
What version of Premiere Elements is still installed activated on the old computer (what is your old operating system)?
What version of Premiere Elements are you going to install and activate on your new computer (what is your new operating system)?
Before you do anything, how many of your computers now have the same Premiere Elements purchased/activated serial number installed on them - just that one old one?
The answers to the above might help us to help you so that you do not have to contact Adobe.
We are not Adobe, rather user to user.
ATR

Why can not I install iTunes on Win 7 installation appears every time the next sunrise; service, apple mobile device, failed to start verify that you have sufficient privileges to start system services Please help me

Why can not I install iTunes on Win 7 installation appears every time the next sunrise;
service, apple mobile device,
failed to start verify that you have sufficient privileges
to start system services
Please help me

The most complete instructions for resolving the issues with the new iTunes is in the user tip: https://discussions.apple.com/docs/DOC-6562

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram. i receive the error 12 This device cannot find enough free resources that it can use. please help

I, work on dell laptop latitudes version 7, win 7 64 bit, ssd disk, 16 gb ram.
i receive the error 12 This device cannot find enough free resources that it can use. please help

1. You have placed problem in wrong forum, or use different Windows operating system
2. Double check your resources, namely in Disk manager. What is free space on HDD?
Regards
Milos

Cannot recover Satellite to factory settings after Win XP installation

I was running windows recovery then I choose option "delete all data.... "something like that.
Then in the middle by mistake I turned off the system.
After I tried to started windows if was giving error "operating system missing". I manage to install WINDOWS XP so I might able to access HDD RECOVERY but nothing happened.
I tried pressing "F8" key and also "0" key when computer start at "toshiba" logo but it's still not giving me option to recover my computer back to windows vista or you can say "out of box state".
One Important things is, while installing windows XP its showed me that HDD recovery exists and only 973MB is free out of 5665MB. It means I still have all the windows and drivers on HDD. Now please help to recovery system back normal or OUT OF BOX STATE.

> After I tried to started windows if was giving error "operating system missing". I manage to install WINDOWS XP so I might able to access HDD RECOVERY but nothing happened.
The Win XP installation has damage and deleted the boot manager and the options preinstalled by Toshiba and supported by Toshiba image.
This means that if you will not be able to recover the unit using the HDD recovery option.
You could recover the unit back to factory settings only using the Toshiba recovery disk!!! But I assume you didnt create such disk is it right?
Well, in such case you could order such disk from here:
https://backupmedia.toshiba.eu/landing.aspx
Greets

Install an SSD in a Macbook - Installer un SSD dans un Macbook

Bonjour à toutes et à tous,
Ici, je ai demandé se il était possible d'installer un SSD (Samsung EVO 850) dans mon MacBook Pro mi-2012 et si la fonction compensateur a été prise en compte? Parce que je ai vu beaucoup de choses qui parle Kext Signature bloquant le mac au démarrage du système. Si ce est elle que je vais finir avec Windows Virtual PC os X pour le prix que vous payez, ou est le produit de la marque Apple!
Bonjour à tous et à Toute,
Voilà je aurai Souhaité savoir si Il était possible d'installateur non disque dur SSD (Samsung EVO 850) Dans mon macbook Pro Mi-2012 et savoir si la Fonction garniture etait en prix Compte? Car je ai vu beaucoup de truc qui parle du Kext signature Qui bloque le mac au démarage du systeme. Si ce est sa je vais finir sous de Windows Avec Un Virtual PC de OS X verser le prix ous le paye ce est produit de la marque à la pomme!

It sounds as if you've all the bases covered.
Just two small things:
Make certain, after you've installed a bootable OS on your SSD, that you go to System Preferences>Startup Disk and select the SSD. Many folks have missed this step and been less than pleasantly surprised when bootup is 45 seconds rather than the expected 15 seconds.
Use Time Machine wisely. Don't rely on monthly backups but rather daily or hourly (if you're close to your external). Since you'll have a USB 3.0 machine, be certain to get a good USB 3.0 external drive for Time Machine backups - maybe even two external drives if, like myself, you're paranoid about disk failure. When I'm at my desk, I have my Firewire 800 drives connected to my Apple Thunderbolt Display and backup to a 1TB FW drive and a 2TB FW drive. And I have hourly backups. Once a month just isn't good enough.
You'll need to download and keep a copy of "Install OS X Mountain Lion.app" to make your USB flash drive stick. With this in your Applications folder, you can use Lion DiskMaker to make a USB flash drive using a 8GB+ USB stick. You can also make a bootable dual-layer DVD (but the USB drive will be faster).
As I said, it sounds as if you've everything in hand otherwise. Good luck with your new MBP and your SSD - I love the speed on mine and I'm sure that you will as well.
Clinton

Win XP installation failure on MEGA 865 PRO

I'm fighting with my MEGA 865pro, Celeron D 341,2x256 RAM, HDD Maxtor 200GB SATA , DVD-RW LG.
Everything went ok up to the XP installation, i.e. I installed instant-On on an empty disk (it runs and works). Then I boot a Win XP install CD, and it hangs a second after displaying the initial message: "..detecting hardware....". The HDD access led stays on. The same for XP SP1 and SP2. Any BIOS tweaking does not help.
After XX tries, I found out the SATA HDD is the bad guy, as the XP setup goes ok if I use my old ATA disk, or even if I use both the SATA and the ATA disks.
Interestingly, Win 2000 installs *without any problems* (but then InstantOn does not boot)!!! Gentoo and Ubuntu linux work as well.
I'm trying to install the absolutely standard and ("only") recommended configuration, so what ... :(
I've seen few posts about this here and there (e.g. https://forum-en.msi.com/index.php?topic=85690.msg616103#msg616103), but no solutions so far :((((
Thanx
viz

Dunno if you allready did, but you need to have the latest BIOS to run Win XP SP2 on the MEGA 865 Pro. When i bought mine, Sp2 wasn't out yet and things worked fine. When i tried installing SP2, everything went fine, untill i boot. Black screen and nothing, after a while MSI released a new BIOS fixing the problem, newest BIOS i think is 1.30
Mosher

Neu-Installation von Acrobat 7.0 Standard unter Windows 7

Ich habe das Produkt neu installiert. Danach wurde ich aufgefordert, das Produkt zu registrieren. Wenn ich die Seriennummer eingebe, erhalte ich die Meldung, das Produkt sei bereits registiert. Es taucht allerdings in der Liste meiner registrierten Produkte unter MyAdobe nicht auf. Was kann ich tun?

s.hier:
https://www.adobe.com/cfusion/entitlement/index.cfm?loc=de&e=cs2_downloads
Habe ich geladen und installiert. Funktioniert faltenfrei.
Von: Mylenium [email protected]
Gesendet: Samstag, 30. März 2013 15:52
An: Beckendorff
Betreff: Neu-Installation von Acrobat 7.0 Standard unter Windows 7
Re: Neu-Installation von Acrobat 7.0 Standard unter Windows 7
created by Mylenium <http://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/5192360#5192360

Need a help on AHCI & RAID setup during Win 7 installation

Hello,
Sorry for a newbie question, but I need to reinstall Win 7 Professional with my new rig.
I would appreciate your help.
What are the procedures for the windows installation?
I would like to set up AHCI and RAID controller, as someone had suggested that Intel recommends RAID setup even for non-RAID configurations.
Here's the spec of my rig:
Motherboard: P67A-GD65 (B3)
CPU: Intel Core i7 2600k
CPU Fan: CoolMaster V8 (180W)
RAM: G.Skil F3-17000CL9D (4GBx2)
GPUs: Palit GTX 560Ti (x2, no SLI)
SSD: Crucial C300 (64GB)
Hard Drive: WD 1002FAEX (1TB)
Optical Drive: Lite-on BR Burner
Case: Corsair 650D with stock case fans
PSU: Corsair TX750W
Thanks in advance

The board should comes with a Manuel for you to refer on the installation of different drivers for the controllers.

P55-GD65 - SATA port and driver installs for SSD ?

Please can anyone help...
I have a MSI P55-GD65 mb (AMI BIOS v1.2/012.020.000.015) and am about to do a clean install of Win 7 64 bit onto an unused Crucial M4 SSD (firmware rev 010G). After disconnecting my existing HDD from SATA1.....
Q1 Should I update the mb BIOS? I currently have no probs....if it aint broke....
Q2 Which SATA port should I connect the SSD to?
   SATA 1-6 ports are Intel P55, SATA7 is supported by JMicron JMB363
Assuming the next steps are:
   plug CD/DVD drive into SATA 4
   boot into the BIOS, enable AHCI and set the SSD as the primary boot drive after the CD/DVD drive
   boot from the Windows 7 disc and install the OS,
Q3What do I do about installing drivers?
Allow any default drivers to install from Win7, then install drivers from the mb disc (starting with chipset drivers), then update them with the latest from MSI. Or what?
I understand that rebooting after installing each driver (and the updates) is a good idea (NickN from SimForums), but this suggests a lot of reboots !
If some reboots can be left till several drivers are in, at which points should reboots be done if there are 5 or 6 drivers+updates to install? I wouldn't be bothering with any RAID configuration or the floppy drivers.
Finally..
Q4 At what point do I perform the firmware update of the Crucial SSD (to rev 040H) ? I'm assuming a driver install will be required for this.
Thanks

Quote
Q1 Should I update the mb BIOS? I currently have no probs....if it aint broke....
If all is well don't do anything.
Quote
Q2 Which SATA port should I connect the SSD to?
SATA 1-6 ports are Intel P55, SATA7 is supported by JMicron JMB363
All of the ports are SATA II, so any port 1-6 would be fine. I suggest port 1 or the purchase of a sata III card. IE:
http://www.amazon.com/SIIG-SATA-6Gb-2-Port-PCIe/dp/B006Q4MGOM/ref=sr_1_3?s=electronics&ie=UTF8&qid=1368545006&sr=1-3&keywords=sata+iii+card
Although I won't make a huge amount of difference.
Quote
Q3What do I do about installing drivers?
Allow any default drivers to install from Win7, then install drivers from the mb disc (starting with chipset drivers), then update them with the latest from MSI. Or what?
I leave the internet disconnected until I have loaded all of the drivers. I also generally do an F6 installation with the most recent AHCI / Raid drivers available if applicable.
Once all of the drivers are install, I connect the internet and let it update.
Quote
Q4 At what point do I perform the firmware update of the Crucial SSD (to rev 040H) ? I'm assuming a driver install will be required for this.
If there is a firmware update available, the best thing to do would be to install the ssd in another computer, update the firmware, then place it in your computer. (or keep the existing hdd in for a moment to do this)
Data loss is very possible during an ssd firmware update.

Win XP Installation problem on System with KT880 DELTA FSR

WHen I try install win xp with sp2 included, installation fails in about 19 minute to end in graphical part of installation.
when installation crashes i see only blue screen with
IRQL_NOT_LESS_OR_EQUAL
configuration is here
CyberCase CY 229 ATX se zdrojem 400W
MB MSI KT880 Delta FSR
CPU Athlon XP 2800+ Barton BOX
DIMM 512 CL 2.5 8x32 Apacer
GPU Sapphire Radeon 9600
FDD ALPS 3.5"
HDD WD 80GB IDE on IDE 1
DVD RW LG GSA 4160B Dual on IDE 2
I tried in BIOS agp 4x, vlink and fastwrite disabled, etc..
Help please ..

You can test the memory by downloading this program,
http://www.memtest.org/download/1.40/memtest86+-1.40.floppy.zip
Creates a bootdisk which you must boot from. (Disk cannot be read in windows)
If the PSU cannot provide enough power then running the memory at a lower frequency can help, as 333Mhz uses less power than 400Mhz.
Test the memory at 333Mhz and see if you get any errors, maybe ask a friend to run the memory at 400Mhz with memtest.
If it does run at 400Mhz (200Mhz) without any errors then it is not faulty.
From this point forward you will always test any memory modules that you buy with memtest.
It is a very useful program.

Satellite U940 PSU6SA - Win 7 installation ask for HDD drivers

Hi
not sure whether to put this under 'Windows 7', Mods please move as needed.
I have a Toshiba U940 PSU6SA-02K002 ultrabook which came with Windows 8 (not Pro) and I would like to install windows 7 on it. It has a 500 GB Hitachi and a small 32GB mSATA SSD.
It is already running Toshiba's latest BIOS 1.30.
I have turned off secure boot and UEFI, can boot and start the windows 7 install from USB but it is looking for extra drivers that I can't work out. I have tried various windows 7 drivers that Toshiba had on their site for the 940 Ultrabooks but without luck. (Intel Rapid Storage Technology Driver, Intel Chipset Software Utility, USB 3 driver and Intel Display Driver).
I'm unziping the drivers onto a separate USB and the install is finding them but they don't seem to be what it is looking for.
Any suggestions or a guide? Thanks

What you need is SATA driver that must be loaded before Win7 installation starts.
Please download it from here .
Ive used it to install Win7 on my U940.

U510 Win 7 neu Installation Wie SSD nutzen

Similar Messages

Maybe you are looking for