UB12 DRC error filter manager doesn't save filters

In a PCB design, I have about 30 DRC errors that cannot be corrected due to the nature of the design (overlapping parts). These DRCs are listed in the results tab and the DRC tab of the spreadsheet view.
On the DRC tab of the spreadsheet view, If I right-click the DRC list and select add to filter, the DRCs disappear from the list, and the DRC markers disappear from the workspace. - Cool. I then switch to the results tab of the spreadsheet view, right click and clear the results list. Then I run the DRC and netlist check. Still no DRC markers in the workspace, no DRCs listed in the DRC tab of the spreadsheet view, no DRCs listed in the results tab of the spreadsheet view. Just a note about filtered DRCs.
I right click on the DRC list box in the spreadsheet view and select filter manager. Filter manager appears and the filter I just created is shown. I close the filter manager, then I save all and close UB.
I start UB again and open the same project and electronic design, the DRC markers show again in the workspace. However, the DRC errors are not listed in the DRC tab of the spreadsheet view. Even if I run a DRC and netlist check. However, the DRCs are listed in the results tab of the spreadsheet view. If I right click in the results list, I cannot filter the DRCs. If I right click in the DRC list I can select add to filter, but nothing happens. If I open the filter manager, no filter is shown. If I use the task bar to switch to another program, then switch back, that's when the DRC error re appear in the DRC list.
What's with this coo-coo behavior, and why doesn't the filter manager save my DRC filters?
Thanks
Regards,
Who

Hi,
The filters applied to the design should be removed everytime you re-open the design. These filters do not get saved along with the design. I tried out the filter manager and it seems to show the DRC errors right away after I re-open the design.
Hope this helps.
Regards,
Tayyab R,
National Instruments.

Similar Messages

Filter warning and ascii save error

Hello,
I am performing modal
analysis using a impact hammer, USB NI 9233 cRIO DAQ and Sound and
Vibration assistant. The steps have been set in Signal express as DAQ
Acquire =>Trigger=>Filter=> Power spectrum => FRF =>
Save to Ascii.
I am facing two problems which I cant
understand. Inspite of selecting data for saving as an ascii file it
keeps giving me an error saying data file needs to be selcted. I
selected the filtered data, FRF, coherence in separate save as ascii
steps. Also the filter issues me a warning that the triggered data is
not contiguous. What does this mean? I have selected the option of
continuous samples in the DAQ Acquire tab. Do I need to change
something else? I tried using both IIR and FIR filters and it still
displays the error that Signal is not contiguous.
Thankyou.
Solved!
Go to Solution.

Hello StuMtu,
Thanks for your post!
For the save to ASCII file problem I would say to make sure that you have a path specified in the File Settings Tab of the Save to ASCII/LVM file step. See the picture attached below. Also the warning you are getting about "contiguous" data means that the information that you are sending to the Filter step is not of a continuous Time Stamp Data. I am assuming here that you are only sending the trigger data from the 9233 to the Filter step. So for instance if your event happens 1 second apart then the data going to the filter is not continuous/contiguous. The data going to the filter is continuous but the time stamps do not fall right after the other. This is OK and its still going to filter your data but its just letting you know that your data is not continuous since each block of filtered data does not have a consistent time stamp. Let us know if this clears up your problems or concerns and have a great day!
Cheers!
Corby_B
Attachments:
SVA save to file.jpg ‏147 KB

"An error occurred while trying to save..." Library

Perhaps it's something minor, but I had this message out of the blue with iPhoto:
"An error occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library".
After that message I closed iPhoto, and just restarted my Mac. The message hasn't displayed again. So far I haven't found any error or "lost changes" in my library. Those two recommendations from the message are checked and OK. There's plenty of space, I can access my photos and everything seems OK.
I keep iPhoto running all the time even when my Mac is sleeping. It runs from an external HD.
Should I rebuild my library just in case, before my next full back up? I have a current backup of the dB Library (I use OT's Automator action). Should I restore it as well? Or just ignore that unusual warning? Ever since I use a managed library, it's the first time an error seems to occur.
Thanks.

Thanks. I have already purchased Library Manager from some time ago. I'll give it a try to its rebuilding funtion, even though it's a big copy to be made (my library is about 90GB).
Before that huge task, I'd like to point out some comments I've found in the iPLM help. It mentions a possible corruption of the AlbumData.xml file regarding keywords (invisible "null" characters on any keyword), and I have LOTS of keywords. I use Keyword Manager, by the way. That, and other considerations are listed for possible sources of an error.
Also, I found this thread regarding the same issue:
http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
The link to arbysoft doesn't seem to work, by the way.
http://macchampion.com/arbysoft/
In that thread this was used as an alternative after unsuccessfully rebuilding with iPLM. Maybe can I try this easier-at-a-glance option first?
JJ

Hi I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from t

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help. I also found disk erros and reaoired permissiomn and the restarted and did disk utlty again and repaired the same disk errors and then did a restart and still does not remember passwords or ask me. Did all this still no luck it saved apple login on here and saved gmail account but others one it used to save does no longer.here is what i did below and still no luck.
Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

"An error occurred while trying to save your photo library..."

Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

Permissions issue: An error occurred while trying to save your photo librar

I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08).
My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has such a large hard disk (750gb), I wanted to move my library there. I copied the library over to the Pictures folder in my user folder on the iMac and started up iPhoto, and everything seemed fine.
When iPhoto is running for any length of time, I get the following error:
*An error occurred while trying to save your photo library.*
*Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library.*
(I have over 300gb available on the disk and my library folder is approximately 40gb.)
I've repaired the permissions on the library using iPhoto's built-in mechanism (command-option while booting iPhoto) and Disk Utility. Additionally, I've used BatchMod to give my user and group full read/write/delete permissions (as posted elsewhere in the forums), but I still get the error.
Searching the forums yields other users w/ the same issues. What's the scoop? TIA!

Sean:
I just had the very same problem when I was messing with permissions and reset my unknown group to staff. I lost all write permissions in my nome folder. Here's how you can reset it for your pictures folder:
In the Terminal type in "sudo chmod -R -N " (there's a space after the N) and drag the Pictures folder into the Terminal window. Then hit the enter key. It should chug along for a couple of seconds and return a new prompt. Give iPhoto another try after that.
I had to do that for my entire home folder and it fixed the problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhoto: An error occurred while trying to save your photo library.

"An error occurred while trying to save your photo library.
Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
Basically, the same issues as this thread:
http://discussions.apple.com/thread.jspa?threadID=1588998&tstart=0
I have tried the BatchMod with no luck. If it matters, this is on an external hard drive and I am the only user on this computer. Looking at the info of the library file, I have read/write/execute permissions and my group has read permissions only. I thought BatchMod would change these permissions but it doesn't seem to work.
Actually, I restarted my computer and it works now. But I am still worried it might happen again. Has anyone else encountered this problem?
Thanks.

Welcome to the Apple Discussions. If it's working now it could have been a one time hiccup. Do you backup your library on a regular basis? If not you definitely should.
If the library gets damaged/corrupted you won't lose your photos but can lose all of your organizational effort that you put into the library. If the external HD crashes then you will lose all.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Error Message: "An error occurred while trying to save your photo library."

I am all of the sudden getting this error message while in iPhoto, seems to come up after I try to delete some photos:
"*An error occurred while trying to save your photo library.* Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library."
I have 83 GB of hard disk space available. Any help?

Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Safari doesn't save passwords for webpages like Facebook, Youtube, Twitter etc.

Hi
I have Mountain Line with Safari 6.0.2. I used to open Facebook, Youtube, Twitter etc. and everytime I select "Stay signed in" "Remember my password" etc. but it doesn't save my passwords and everytime I have to sign in again. I never sign out from these websites but when I open it next time, it requires username & password.
Does anybody know the problem & solution, plz help.

Instructions
Set Your Passwords Preferences
1
Open up your Safari Web browser and choose 'Preferences' from the Safari pull down menu
2
Click on the heading 'AutoFill.'
Click on the box next to 'User Names and Passwords.'
4
Close the 'Preferences' window.
Save Your Passwords
5
Go to a Web page that requires a password and enter in your chosen password. Safari will then ask if you would like to save this password.
6
Click on the button 'Yes' in order to save the password.
7
Complete steps 1 and 2 for any other passwords that you want Safari to remember.
Manage Your Passwords
8
Go to the 'AutoFill' section in the Safari Preferences window.
9
Click on the 'Edit' button to the right of where it says 'User Names and Passwords.' This will bring up a window displaying all of the passwords and usernames that you have authorized Safari to save.
10
Click on a password listing and push the 'Remove' button in order to delete the password from Safari's memory.
11
Choose 'Remove All' in order to delete all of the saved passwords.
12

Openoffice 3.2 calc doesn't save row height in xls

Hi All,
I have upgraded to ooo 3.2 recently. I work with excels spreadsheets so I have to save files into xls. Suddenly I realized that Calc doesn't save custom row height, when I open the file all rows are displayed with default height. It worked in the previous version, pacman log: upgraded go-openoffice (3.1.1.5-1 -> 3.2.0.4-1)
I searched ooo forums, but didn't find anything.
update:
in case someone is interested, I have found a kind of work-around. Select sheet, Format / Rows / Optimal height -> increase value at least one step, in my case from 0.0 mm to 0.1 mm, then save. Reopen xls, rows will be displayed with the custom heights. Unfortunately one has to apply this workaround on every singe sheet in the workbook. :-/ No way I would do this with all my workbooks.
Last edited by siriusb (2010-02-03 09:52:39)

Workaround with downgrade: If someone successfully downgraded to 3.1.1 it wont start because depends on libjpeg.so.7.
1. Create a script somewhere in your PATH and make it executable:
#!/bin/bash
LD_PRELOAD=/var/tmp/libjpeg.so.7.0.0 soffice -calc "$1"
2. copy libjpeg.so.7.0.0 to the directory mentioned in the script (in this case /var/tmp)
3. in your file manager e.g. nautilus right click on the xls, choose properties / Open with / custom command, and use the script's name.

Error: "Conduit Manager quit unexpectedly" during Mac Hot Sync

Hello! After many years of successfully hot-syncing my Palm m500 to my various Macs, i'm suddenly getting an error message every single time my Hot Sync tries to sync the Datebook data:
The application Conduit Manager quit unexpectedly.
Mac OS X and other applications are not affected.
Click Relaunch to launch the application again.
i've already tried reattaching the USB cables and the Palm m500 into the cradle, and rebooting my Mac several times, and removing the "com.palm.xxxx.plist" files and the "Palm Desktop Info" file from my users/library/preferences folder. and i've spent several hours cruising these forums but nothing has worked. I've tried hot synching about 10 times in the last 12 hours but i keep getting this same error.
i also tried slowing down my hot sync by pressing the Shift key on my Mac during the entire hot sync, but i still get this error:
Conduit Manager: Unexpected error #-111
i tried to paste my full log report below but i ran into the 20k character limit for this form. since it looks like it's "Thread 4" that is causing the crash, i've deleted other parts of the log report but can send those to you in another posting if that would help.
thanks in advance for any help you can offer! i love my Palm m500 as I much prefer it to Apple's iCal system and would like to fix this problem so I don't need to abandon my Palm!
Report:
Process:         Conduit Manager [217]
Path:            /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Identifier:      com.palm.HotSync.ConduitManager
Version:         3.2.1 (3.2.1)
Code Type:       PPC (Translated)
Parent Process: launchd [144]
Interval Since Last Report:          657 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 41 sec
Per-App Crashes Since Last Report:   1
Date/Time:       2010-01-03 00:20:36.147 -0800
OS Version:      Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 26B9A75C-009B-45C3-B160-FB5932991E00
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000160fc198
Crashed Thread: 4
Thread 0:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 1:
0   ???                               0x800bc286 0 + 2148254342
1   ???                               0x800c3a7c 0 + 2148285052
2   translate                         0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3   ???                               0x800ed155 0 + 2148454741
4   ???                               0x800ed012 0 + 2148454418
Thread 2:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 3:
0   translate                         0xb81529ef spin_lock_wrapper + 90931
1   translate                         0xb8183633 CallPPCFunctionAtAddressInt + 169935
2   translate                         0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3   translate                         0xb80dfb0b 0xb8000000 + 916235
4   ???                               0x8138b831 0 + 2167978033
Thread 4 Crashed:
0   ???                               0x7c00867b 0 + 2080409211
Thread 5:
0   translate                         0xb8152c24 spin_lock_wrapper + 91496
1   translate                         0xb816c825 CallPPCFunctionAtAddressInt + 76225
2   translate                         0xb80bdb8b 0xb8000000 + 777099
3   translate                         0xb80b7007 0xb8000000 + 749575
4   translate                         0xb80d49c0 0xb8000000 + 870848
5   translate                         0xb813d75f spin_lock_wrapper + 4259
6   translate                         0xb8011b64 0xb8000000 + 72548
Thread 6:
0   translate                         0xb815289e spin_lock_wrapper + 90594
1   translate                         0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
2   translate                         0xb80dfb0b 0xb8000000 + 916235
3   ???                               0x819d8c92 0 + 2174586002
Thread 4 crashed with X86 Thread State (32-bit):
eax: 0x98c10f16 ebx: 0x00000200 ecx: 0x160fc198 edx: 0xf01804e0
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x80817f80 esp: 0xb019eeec
   ss: 0x0000001f efl: 0x00010213 eip: 0x7c00867b   cs: 0x00000017
   ds: 0x0000001f   es: 0x0000001f   fs: 0x0000001f   gs: 0x00000037
cr2: 0x160fc198
Thread 4: (0xb011c83c, 0xb81529ef)
0x00163b90: No symbol
0x94f46bb0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
0x94f4bfa4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
0x94f4becc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
0x15dd37c8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _SemWait__7LThreadFP10LSemaphorelR4QHdrRUc + 144
0x15ddcb90: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _BlockThread__10LSemaphoreFl + 92
0x15ddca38: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Wait__10LSemaphoreFl + 104
0x15dd1eb4: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Run__Q27LThread7CleanupFv + 48
0x15dd3df8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _DoEntry__7LThreadFPv + 64
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
PPC Thread State
srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
cr: 0xXXXXXXXX        xer: 0x00000000        lr: 0x91335120        ctr: 0x9132e1f0
r00: 0xffffffe1     r01: 0xf0101ae0     r02: 0x00000013     r03: 0xf0101b8c
r04: 0x00000003     r05: 0x00000018     r06: 0x00000020     r07: 0x00006187
r08: 0x00000000     r09: 0x00000000     r10: 0x00000000     r11: 0xa020568c
r12: 0x9132e1f0     r13: 0x00000000     r14: 0x00000000     r15: 0x00000000
r16: 0x00000000     r17: 0x00000000     r18: 0x00000000     r19: 0x00000000
r20: 0x00000000     r21: 0x00000000     r22: 0x00000000     r23: 0x00000018
r24: 0xf0101b8c     r25: 0x00000020     r26: 0x00006187     r27: 0x00000000
r28: 0x00000000     r29: 0x00000003     r30: 0x00000003     r31: 0x94f469a4
Thread 5: Crashed (0xb019eeec, 0x7c00867b)
0x7c367b28: No symbol
0x7c364a58: No symbol
0x7c364b44: No symbol
0x7c35a818: No symbol
0x7c34a3bc: No symbol
0x7c347fe8: No symbol
0x7c34813c: No symbol
0x7c32da54: No symbol
0x7c329168: No symbol
0x7c327e70: No symbol
0x7c32763c: No symbol
0x7c32884c: No symbol
0x7c346c48: No symbol
0x7c346ec0: No symbol
0x8536c290: No symbol
0x8536cf30: No symbol
0x8536cb6c: No symbol
0x8536e004: No symbol
0x85366484: No symbol
0x85372680: No symbol
0x853c949c: No symbol
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp :   + 0
PPC Thread State
srr0: 0x00000000    srr1: 0x00000000                     vrsave: 0x00000000
cr: 0xXXXXXXXX        xer: 0x20000000        lr: 0x7c367a80        ctr: 0x9132f590
r00: 0x00000008     r01: 0xf01804e0     r02: 0x15f2f000     r03: 0x00000003
r04: 0x1610beb8     r05: 0x00000002     r06: 0xf018051c     r07: 0x00000000
r08: 0x000eb2a4     r09: 0x00000000     r10: 0x00800000     r11: 0xa0882d04
r12: 0x9132f590     r13: 0x00000000     r14: 0x003f252c     r15: 0x00000001
r16: 0x001751f0     r17: 0x003f2558     r18: 0x003f2588     r19: 0x003f2518
r20: 0x003f24e8     r21: 0xf0181426     r22: 0x00144c00     r23: 0x00000003
r24: 0x00000008     r25: 0x15f32dcc     r26: 0x15f32d54     r27: 0x0000ffff
r28: 0x000095bf     r29: 0x15f3705c     r30: 0x15f37060     r31: 0x00893ca8
Post relates to: Palm m500
Post relates to: Palm m500

I had the same problem syncing my Palm TX with 10.5.8. After being without my Palm for 3 weeks, I bought Snow leopard, and all was fine again. I found out at an Apple store that 10.5.8 was full of propblems, and this was one of them.
Fast forward: I've been using 10.6 ever since it was released, happily syncing away with my Palm ... until Friday night (2 days ago), when it stopped working, and then I discovered that Palm does not and will not support Mac OS 10.6. So I'm urgently trying to migrate everything on Palm to my iPod Touch, exporting to 10.4 on an old iBook, since it will still sync with it, then moving the data to my iMac's 10.6, and then syncing with my iPod Touch.
I'm working on the problem now, and have my Schedule migrated, but now need to get my ToDo, Address Book and Memos done.
The 10.6 Address Book (v5.0.1) doesn't support the Palm's custom fields like Tiger's Address Book (4.0.6). I can't yet find a way to export the Palm's ToDos in a format that iCal can consume, and Notes on the iPod (for my Memos, possibly) is not supported on 10.6 yet for my iPod Touch.
1 step forward, 3 steps back, so far; but absolutely necessary, now that Palm has withdrawn from the Mac market.
Any ideas on these 3 problem areas, from anyone, would be most welcome.

Password Manager doesn't work for me now!!!

I had start up problems with my laptop so I had to get all my files retrieved from the HD and reload them.
When I did a cut and paste after reinstalling TB all my data come back which was excellent.
Unfortunately, when I selected "Get Messages" nothing happens. I had to right click on the email address and the select "Get Messages" for each individual email address that I have loading (6). This brings up the ISP password login...when I enter the required password and check the "use Password Manager.... etc." it doesn't save the password or retrieve the mail.
The email loads if there is any to retreive as long as I don't check the"password Manager"...but I have to go through the process explained above again and again at it has become tiresome and well, quite frustrating.
Any suggestions???

Sadly, downloading and installing the latest version of Applicarion Manager did not resolve this problem. Thanks, though!

PLCC-28 DRC Errors

Hey all, me and my work partner have a question since when we import the part PLCC-28 (This is just a differential clock driver) the part itself has DRC erros even though
is from the NI library!
Design Rule Error: Net VCC Close To Net 0
Design Rule Error: Net SMA20 Close To Unused Pin.
This is because the top right pin and right pin on top seem to be too close to each other....is there anyway this can be a mistake in the original package file...also I tried right clicking the
part and doing an in place part edit and I managed to move the pins a bit apart and then after I was done it showed no DRC errors...but the problem is you can move the pins around just like that right?
Any help would be great, let me know your thoughts on this.

Hi, Design Rules Check (DRC) errors are defined by the designer, not by NI. You start with a default global setting that may or may not be good for your design. One of the first steps when you transfer a design is to actually define your design rules along with many other things.
If two pins are too close together, and you are getting a DRC, go to View > Clearances and you will see that most likely the clearance area around those two nets are too close together, you might need to select the specific pin, right-click and select properties, then on the Pin Properties dialog select the General tab, look for the Clearance field and decrease it. Or use the Spreadsheet View to locate those pins (SMT Pads tab or THT Pads tab), then use the Trace Clearance column to decrease it.
DO NOT move the pins away, usually footprints are designed to match the actual part when placed, if you move the pins you might not be able to fit the part once you place it to solder it.
Nestor
National Instruments

My iPod syncs, but doesn't save ANYTHING on the iPod

Basically, my iPod syncs, but doesn't save ANYTHING on the iPod, its the first iPod I have used and it really annoys me... I have tried pretty much everything :@
Help?!

Hello JellyPopJade,
And welcome to Apple Discussions!
How do you have your iPod configured to sync with your iTunes library? Automatically or do you manually manage its contents by dragging what you would like from your library to the iPod.
If you have it set to automatically sync all checked songs and videos, make sure each track you wish to sync to your iPod is checked within your iTunes library.
Under the Summary tab for your iPod, is there any space taken of by the "Other" category (orange)?
B-rock

Iv'e got this error message : "protocol doesn't support output"

When i execute my applet the part of code below give's me thi error message: "protocol doesn't support output". This part of the code save's a vector(of string) into a data file. I'm able to load the file but i can't put info in it. Helppppppppp:
That's the method where tje problem is :
private void saveVector()
Evenement Ev;
try{
// THE ERROR IS PROBABLY IN THE 2 NEXT LINES!
Dos = new DataOutputStream(new BufferedOutputStream( new URL(this.getCodeBase(), FichierEvenement).openConnection().getOutputStream()));
for ( int i = 0; i <= VecEvenement.size();i++ )
Ev = (Evenement) VecEvenement.elementAt(i);
String Ligne = Ev.getDateEvent().trim().concat("|")+ Ev.getTitre().trim().concat("|") + Ev.getLieu().trim().concat("|") + Ev.getDesc().trim().concat("|") + Ev.getPers().trim().concat("|")+ Ev.getAdresse().trim().concat("|");
Dos.writeUTF(Ligne);
Dos.close();
catch (Exception e) {
LErr.setText(e.getMessage());
}

http://java.sun.com/docs/books/tutorial/networking/urls/readingWriting.html
As is noted in this part of the tutorial, a URL may simply not support output:
"Next, the program creates the URL object--the URL for the backwards script on java.sun.com--opens a URLConnection, and sets the connection so that it can write to it:
URL url = new URL("http://java.sun.com/cgi-bin/backwards");
URLConnection c = url.openConnection();
c.setDoOutput(true);
The program then creates an output stream on the connection and opens a PrintWriter on it:
PrintWriter out = new PrintWriter(c.getOutputStream());
If the URL does not support output, getOutputStream method throws an UnknownServiceException. If the URL does support output, then this method returns an output stream that is connected to the standard input stream of the URL on the server side--the client's output is the server's input. "
Sorry I can't be of more help.

UB12 DRC error filter manager doesn't save filters

Similar Messages

Maybe you are looking for