Ubd and check reserve space
Hello,
Like most people I have an hyperactive ubd process, and it's not because of the keychain, or a folder that it can't create.
In the Console logs, http://photo.solstices.ca/autres/infos/screenshot.png I get this error many times a second.
Any ideas?
Thanks
Loa
Dave, his problem is that the iPad says there is not enough unused storage to download more photo using the CCK he already has. He said he deleted stuff and the iPad say there is storage space available but when he used the CCK it says there is not enough storage space available.
For the original poster (sorry forgot name), have you tried reseting your iPad to try to make the empty space available.?
Reset:
Press and hold both the Sleep/Wake button and the
Home button for at least ten seconds, until the Apple logo appears.
David M Brewer wrote:
You need the Camera Conntion Kit from the Apple store:
http://store.apple.com/us/product/MC531ZM/A?fnode=MTc0MjU4NjE&mco=MTc0Njk4NzU
Similar Messages
-
Zune and reserved space problem
Hi all, I just started using lumia 710 and finding it a great, fun and highly efficient device. One minor problem I am getting is with zune and reserved storage space.
If I install a game/app in phone, the reserved space bar increases as expected. But the problem is that, even if I uninstall the game/app, the reserved space bar does not decrase, it stays the same as when the game/app was installed. so if i try out a few apps/ game and remove them later, i lose the equal amount of space from zune media storage. For example I tried out couple of xbox live titles and removed them later, net result --> my reserved space increased ~500mb while i lost 500mb from zune media free space.
if anyone can help me to sort this out, I will be very much grateful.
P.S. from phone i see i have ~ 3gb free space out of 6.28 gb. thanksAdditionaly, I have all my music files in User/Music & in Downloads. I also see my iTunes "Media Folder" is located in User/Music/iTunes and is 20GB...the size itunes says.
-
CS3 Installation "check disc space and write privileges" message
I recently purchased a new desktop. I deactivated CS3 from my old computer (Windows Vista OS) and downloaded CS3 to the new(Windows 7 OS), After it shows 100% extraction, I get a "A problem occured while extracting some files. Check available space on your computer and write privileges for destination folder." Not sure what to do from here and Adobe does not offer any phone support for my archaic version of PS.
I tried out copying the downloaded ADBEPSHPCS3_WWE file to C:\ as suggested in a previous post, however to no avail.
Many thanks in advance to whomever might be able to offer assistance.Thanks again for the replys....
Like I said, my desktop is new--I'm not a techno geek just yet, but it's an ASUS, Intel dual core, I've got 340GB of 372GB available on C:\ and 550GB of 550GB on D:\ ...Would space be an issue with these stats?? The product is downloaded, and when I go to start the instal, it looks like it's doing well at extracting the files and indeed I can access the setup.exe file, but when I try to open it, I get the Windows "Do you want to allow this program to make changes to this computer?" When I click yes, that window goes away, but nothing else seems to happen?? -
Checking Swap space from OS level in HPUX
Hi All,
We have some issues with swap in our SAP production system when I checked the ST06 Tcode
Swap
Configured swap Kb 20,971,520 Maximum swap-space Kb 54,389,460
Free in swap-space Kb 8,945,160 Actual swap-space Kb 54,389,460
And when I checked from the OS level ,it gave me the following result
swapinfo
Kb Kb Kb PCT START/ Kb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 1048576 658208 390368 63% 0 - 1 /dev/vg00/lvol2
dev 19922944 889824 19033120 4% 0 - 1 /dev/vg00/lvol9
reserve - 19423488 -19423488
memory 33417940 24781076 8636864 74%
Does it mean that total swap space is (1048576 + 19922944)KB which is 20GB?
If yes ,then how to increase the swap space in UNIX based systems?
SWAP SPACE = 3*RAM? If yes ,do we need to put swap size =60 GB?
In ST06
what is the difference between CONFIGURED SWAP-SPACE and ACTUAL SWAP-SPACE?
Regards,
Prashant
Edited by: Prashant Shukla on Oct 13, 2008 4:21 AM
Edited by: Prashant Shukla on Oct 13, 2008 4:23 AMHi,
Thanks for ur reply but when I checked it from OS level why it is showing only 20GB ?
What's the diff between configured and actual swap space ?
I checked SAP Notes :146289 and 153641
They clearly says that swap space should be atleast 20 GB plus 10 GB for additional Instance for the server.
In our landscape we have CI and 4 dialog instance connected to it
that means our swap space should be 20 + 10*4=60 GB
We are having HPUX server and ST06 Swap values are
Swap
Configured swap Kb 20,971,520 Maximum swap-space Kb 54,389,460
Free in swap-space Kb 8,697,960 Actual swap-space Kb 54,389,460
Do we need to increase the SWAP Space to increase the system performance?
What is difference between configured swap and actual swap space ?
SAP Note 1112627 clearly says that SWAP SPACE = 2* RAM for HPUX servers.
What do you guys say about this?
Regards,
Prashant
Edited by: Prashant Shukla on Oct 13, 2008 5:15 AM
Edited by: Prashant Shukla on Oct 13, 2008 5:53 AM -
Oracle reserved and non-reserved keywords
Hello,
I'm looking for a list of reserved and non-reserved keywords for all Oracle versions starting from 9.
I think Oracle starts at R1, right? So the versions needed would be:
9.1, 9.2
10.1, 10.2 and
11.1
I found lists of keywords querying Oracle view V$RESERVED_WORDS
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14237/dynviews_2048.htm#REFRN30204
here:
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14200/ap_keywd.htm
However, this is only for version 10.2 and it contains only reserved keywords.
I need a list for every maintenance/minor version. This list must contain all keywords in Oracle PL/SQL, not just the reserved ones, but also those which shouldn't be used in certain contexts described by the V$RESERVED_WORDS view (former link) -> probably reserved = 'N'.
Since I don't own a copy of Oracle and definitely not of every minor version, does anyone know where to obtain such lists?
You might want to do me a favor and query that view for me... ;-) (you can send the output to "k w u t z k e AT w e b DOT d e" ... don't forget to mention the version)
From what the view tells me, the SQL statements to query are:
For reserved words:
select keyword from v$reserved_words where reserved='Y' order by keyword;
For all other non-reserved words:
select keyword from v$reserved_words where reserved='N' order by keyword;
Are there any keywords/entities that are neither reserved='Y' nor reserved='N'?
Can anyone help on this issue please?
TIA,
KarstenNot sure about differences between specific versions but the easy way to get reserved words is in SQL*Plus...
SQL> help reserved words
RESERVED WORDS (PL/SQL)
PL/SQL Reserved Words have special meaning in PL/SQL, and may not be used
for identifier names (unless enclosed in "quotes").
An asterisk (*) indicates words are also SQL Reserved Words.
ALL* DESC* JAVA PACKAGE SUBTYPE
ALTER* DISTINCT* LEVEL* PARTITION SUCCESSFUL*
AND* DO LIKE* PCTFREE* SUM
ANY* DROP* LIMITED PLS_INTEGER SYNONYM*
ARRAY ELSE* LOCK* POSITIVE SYSDATE*
AS* ELSIF LONG* POSITIVEN TABLE*
ASC* END LOOP PRAGMA THEN*
AT EXCEPTION MAX PRIOR* TIME
AUTHID EXCLUSIVE* MIN PRIVATE TIMESTAMP
AVG EXECUTE MINUS* PROCEDURE TIMEZONE_ABBR
BEGIN EXISTS* MINUTE PUBLIC* TIMEZONE_HOUR
BETWEEN* EXIT MLSLABEL* RAISE TIMEZONE_MINUTE
BINARY_INTEGER EXTENDS MOD RANGE TIMEZONE_REGION
BODY EXTRACT MODE* RAW* TO*
BOOLEAN FALSE MONTH REAL TRIGGER*
BULK FETCH NATURAL RECORD TRUE
BY* FLOAT* NATURALN REF TYPE
CHAR* FOR* NEW RELEASE UI
CHAR_BASE FORALL NEXTVAL RETURN UNION*
CHECK* FROM* NOCOPY REVERSE UNIQUE*
CLOSE FUNCTION NOT* ROLLBACK UPDATE*
CLUSTER* GOTO NOWAIT* ROW* USE
COALESCE GROUP* NULL* ROWID* USER*
COLLECT HAVING* NULLIF ROWNUM* VALIDATE*
COMMENT* HEAP NUMBER* ROWTYPE VALUES*
COMMIT HOUR NUMBER_BASE SAVEPOINT VARCHAR*
COMPRESS* IF OCIROWID SECOND VARCHAR2*
CONNECT* IMMEDIATE* OF* SELECT* VARIANCE
CONSTANT IN* ON* SEPERATE VIEW*
CREATE* INDEX* OPAQUE SET* WHEN
CURRENT* INDICATOR OPEN SHARE* WHENEVER*
CURRVAL INSERT* OPERATOR SMALLINT* WHERE*
CURSOR INTEGER* OPTION* SPACE WHILE
DATE* INTERFACE OR* SQL WITH*
DAY INTERSECT* ORDER* SQLCODE WORK
DECIMAL* INTERVAL ORGANIZATION SQLERRM WRITE
DECLARE INTO* OTHERS START* YEAR
DEFAULT* IS* OUT STDDEV ZONE
DELETE* ISOLATION
RESERVED WORDS (SQL)
SQL Reserved Words have special meaning in SQL, and may not be used for
identifier names unless enclosed in "quotes".
An asterisk (*) indicates words are also ANSI Reserved Words.
Oracle prefixes implicitly generated schema object and subobject names
with "SYS_". To avoid name resolution conflict, Oracle discourages you
from prefixing your schema object and subobject names with "SYS_".
ACCESS DEFAULT* INTEGER* ONLINE START
ADD* DELETE* INTERSECT* OPTION* SUCCESSFUL
ALL* DESC* INTO* OR* SYNONYM
ALTER* DISTINCT* IS* ORDER* SYSDATE
AND* DROP* LEVEL* PCTFREE TABLE*
ANY* ELSE* LIKE* PRIOR* THEN*
AS* EXCLUSIVE LOCK PRIVILEGES* TO*
ASC* EXISTS LONG PUBLIC* TRIGGER
AUDIT FILE MAXEXTENTS RAW UID
BETWEEN* FLOAT* MINUS RENAME UNION*
BY* FOR* MLSLABEL RESOURCE UNIQUE*
CHAR* FROM* MODE REVOKE* UPDATE*
CHECK* GRANT* MODIFY ROW USER*
CLUSTER GROUP* NOAUDIT ROWID VALIDATE
COLUMN HAVING* NOCOMPRESS ROWNUM VALUES*
COMMENT IDENTIFIED NOT* ROWS* VARCHAR*
COMPRESS IMMEDIATE* NOWAIT SELECT* VARCHAR2
CONNECT* IN* NULL* SESSION* VIEW*
CREATE* INCREMENT NUMBER SET* WHENEVER*
CURRENT* INDEX OF* SHARE WHERE
DATE* INITIAL OFFLINE SIZE* WITH*
DECIMAL* INSERT* ON* SMALLINT*
SQL>If you haven't got oracle then I'm not sure where you're going to find out all the minor differences I'm afraid. -
OraRRP Error with "Unable to copy data file;Error code 2, check disk space"
Hi,
Some users get this message -"Unable to copy data file;Error code 2, check disk space" when run report with orarrp, but most users do not get it.
I check free space at both server and client side, they are very sufficient.
I also checked directory exists for REPORTXX_TMP variable.
My user call reports via URL (rwservlet) and it occur for all reports.
How I can solve this problem?
Thanks in advance.
Tawatchai R.Hi,
have the same problem now. One user has temporarily problems to download .rrpa files via URL (rwservlet) request. Error code: -"Unable to copy data file;Error code 2, check disk space". Did you get a solution??
Thanks in advance. Axel -
How will check the space taken by a single table in a tablespace ?
How will check the space taken by a single table in a tablespace ?
dba_segments is giving the same values even if I truncate the table?
Pls replyI need to know how can we find out the size of the table in the tablespace.use user_segments (bytes) column.
How much bytes it has taken ?value from user_segments, bytes column
If u delete records will the space be used for another table in same tablespace?No, it keep the space in the same table for future usage.
How can we free that space ?truncate or drop the table and reduce the size from tablespace, if you want to reclaim the space from the tablespace, OS level.
Jaffar -
Error in "Checking Availabe Space for the DB2 UDB for Unix..." phase
Hello,
We are in the middle of an Upgrade proyect from R/3 4.6C (kernet 4.6D EXT) to ECC 6.0.
As a first step we are doing an Heterogenous System Copy to migrate from servers with HP-UX B11.11/Informix 9.4 to servers with AIX 5.3/DB2 UDB 8.
We already did the database import with no errors. When we are installing R3 4.6C in the target server we are getting u201CMemory Fault (coredump)u201D error in the u201CChecking Availabe Space for the DB2 UDB for Unix, Windows Tablespacesu201D phase.
Any advice will be appreciated.
Best Regards
FranciscoHello Paul,
There is no db2diag.log. We are in the first steps of the installation.
Operating System logs just shows an ABNORMALY TERMINATION OF SOTWARE error.
This is the CEDBMIG.log
INFO 2010-08-04 10:12:00 CommandFileController SyFileCopy:150
Copying source file CEDBMIG.R3S to target file CEDBMIG.R3S.30 ...
INFO 2010-08-04 10:12:01 Main
Preparation successfully completed.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:434
checking host name lookup for 'sapqas'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:473
offical host name for 'sapqas' is 'sapqas'.
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:541
host 'sapqas' has ip address '172.26.26.64'
INFO 2010-08-04 10:12:02 CENTRDBINSTANCE_IND_DB6 SyCheckHostnameLookup:581
offical host name for '172.26.26.64' is 'sapqas'.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:23 CDSERVERMIG_IND_DB6 InternalColdKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsattr -El sys0 -a realmem ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:100
The process lsattr puts out:
realmem 8388608 Amount of usable physical memory in Kbytes False
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyRamSizeGet:700
Physical RAM size is 8192 MB.
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:100
Retrieving swap space size ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SyCoprocessCreate:300
Creating coprocess /usr/sbin/lsps -s ...
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
Total Paging Space Percent Used
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:150
The process lsps puts out:
8192MB 1%
INFO 2010-08-04 10:12:23 CALCRAM_IND_DB6 SySwapGetSize:500
Currently activated swap space is 8192 MB.
INFO 2010-08-04 10:12:31 CENTRDBINSTANCE_IND_DB6 InternalWarmKeyCheck:0
The installation phase is starting now. Please look in the log
file for further information about current actions.
INFO 2010-08-04 10:12:31
Requesting Installation Details
INFO 2010-08-04 10:12:31
Reading and Checking DB2 UDB for UNIX, Windows Specific Keys
INFO 2010-08-04 10:12:31
Select the DB2 Storage Management.
INFO 2010-08-04 10:12:31
Choose the number of storage paths for DB2's Automatic Storage
Management.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD KERNEL will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD RDBMS will not be copied.
INFO 2010-08-04 10:12:31 CDSERVERMIG_IND_DB6 InternalWarmKeyCheck:0
The CD EXPORT1 will not be copied.
INFO 2010-08-04 10:12:31
Requesting Information on CD-ROMs
INFO 2010-08-04 10:12:31
Calculating RAM Distribution
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Dispatcher
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Secure Gateway Service
INFO 2010-08-04 10:12:31
Creating the Service Entry for the Message Server
INFO 2010-08-04 10:12:31
Creating the SAP Administration Group sapsys
INFO 2010-08-04 10:12:32
Creating the Database Administration Group db<dbsid>adm
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>ctl
INFO 2010-08-04 10:12:32
Creating the Group db<dbsid>mnt
INFO 2010-08-04 10:12:32
Creating the SAP connect user
INFO 2010-08-04 10:12:32
Setting Password of the SAP connect user
INFO 2010-08-04 10:12:32
Creating the db2<sapsid> User
INFO 2010-08-04 10:12:32
Setting the User Password
INFO 2010-08-04 10:12:32
Creating the SAP System Administrator
INFO 2010-08-04 10:12:32
Setting Password for for the SAP System Administrator
INFO 2010-08-04 10:12:32
Creating Directories
INFO 2010-08-04 10:12:32
Creating Symbolic Links
INFO 2010-08-04 10:12:32
Getting Minimal Size of the Database
INFO 2010-08-04 10:12:32
Changing DB2 UDB for UNIX, Windows Tablespace Data
INFO 2010-08-04 10:12:32
Checking if Required Directories Exist
INFO 2010-08-04 10:12:32
Checking Available Space for the SAP Instance
INFO 2010-08-04 10:12:32
Checking Available Space for the DB2 UDB for UNIX, Windows
Tablespaces
This is the CEDBMIG.R3S log
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@DB_HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@DB_HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@DB_HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_OSUSERSIDADMENVIRONMENT_IND_DB6]
100_GROUP=sapsys
100_OWNER=@LOWER_SAPSYSTEMNAME@adm
100_PERMISSION=0644
100_SOURCE=@HOME@/.login
100_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
110_SOURCE=@HOME@/.login
110_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
120_GROUP=sapsys
120_OWNER=@LOWER_SAPSYSTEMNAME@adm
120_PERMISSION=0644
120_SOURCE=@HOME@/.cshrc
120_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.CSH
130_SOURCE=@HOME@/.cshrc
130_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.CSH
200_SOURCE=@HOME@/.profile
200_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/SAPSRC.SH
210_SOURCE=@HOME@/.profile
210_TEMPLATE=@CDMOUNTPATH@/@OS@/COMMON/INSTALL/DBSRC.SH
[Z_R3DIRECTORIES_IND_IND]
101_PATH=@SAPDIR@
101_PERMISSION=0775
101_SET_FILE_ATTRIBUTES=YES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_PATH=@SAPDIR@/tmp
103_PATH=@SAPDIR@/trans
104_PATH=@SAPDIR@/trans/tmp
104_SET_FILE_ATTRIBUTES=NO
105_PATH=@SAPDIR@/trans/EPS
106_PATH=@SAPDIR@/trans/EPS/in
107_PATH=@SAPDIR@/trans/EPS/out
108_PATH=@SAPDIR@/trans/EPS/log
109_PATH=@SAPDIR@/trans/bin
110_PATH=@SAPDIR@/trans/buffer
111_PATH=@SAPDIR@/trans/cofiles
112_PATH=@SAPDIR@/trans/data
113_PATH=@SAPDIR@/trans/etc
114_PATH=@SAPDIR@/trans/log
115_PATH=@SAPDIR@/trans/sapnames
120_PATH=@SAPDIR@/@SAPSYSTEMNAME@
120_PERMISSION=0751
120_SET_FILE_ATTRIBUTES=YES
121_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
121_PERMISSION=0755
122_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe
123_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/opt
124_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen
125_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/opt
126_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/gen/dbg
127_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS/src
128_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
129_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/data
130_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/log
131_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
131_PERMISSION=0775
132_PATH=@SAPMOUNT@
140_PATH=@SAPMOUNTEXE@
141_PATH=@SAPMOUNTPROFILE@
141_PERMISSION=0755
142_PATH=@SAPMOUNTGLOBAL@
142_PERMISSION=0700
150_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/sec
160_PATH=@STARTDIRECTORY@
160_PERMISSION=0777
[Z_R3DIRPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNT@
101_PERMISSION=0755
101_TRAVERSE=
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0710
103_TRAVERSE=
103_USERGROUP=db@LOWER_DB_SID@adm
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPDIR@/@SAPSYSTEMNAME@
105_PERMISSION=0755
105_TRAVERSE=
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_TRAVERSE=
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0777
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
130_CHANGE_ON_NFS=NO
130_PATH=@STARTDIRECTORY@
130_PERMISSION=0777
130_TRAVERSE=
130_USERGROUP=sapsys
130_USERNAME=@LOWER_SAPSYSTEMNAME@adm
140_CHANGE_ON_NFS=YES
140_PATH=@SAPDIR@/trans
140_PERMISSION=0775
140_TRAVERSE=
140_USERGROUP=sapsys
140_USERNAME=@LOWER_SAPSYSTEMNAME@adm
141_CHANGE_ON_NFS=YES
141_PATH=@SAPDIR@/trans/bin
141_PERMISSION=0775
141_TRAVERSE=
141_USERGROUP=sapsys
141_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3FILEPERMISSIONS_IND_IND]
101_CHANGE_ON_NFS=NO
101_PATH=@SAPMOUNTEXE@
101_PERMISSION=0755
101_TRAVERSE=SUBDIRECTORIES
101_USERGROUP=sapsys
101_USERNAME=@LOWER_SAPSYSTEMNAME@adm
102_CHANGE_ON_NFS=NO
102_PATH=@SAPMOUNTEXE@
102_PERMISSION=0755
102_TRAVERSE=FILES
102_USERGROUP=sapsys
102_USERNAME=@LOWER_SAPSYSTEMNAME@adm
103_CHANGE_ON_NFS=NO
103_PATH=@SAPMOUNTGLOBAL@
103_PERMISSION=0700
103_USERGROUP=sapsys
103_USERNAME=@LOWER_SAPSYSTEMNAME@adm
104_CHANGE_ON_NFS=NO
104_PATH=@SAPMOUNTPROFILE@
104_PERMISSION=0755
104_TRAVERSE=SUBDIRECTORIES
104_USERGROUP=sapsys
104_USERNAME=@LOWER_SAPSYSTEMNAME@adm
105_CHANGE_ON_NFS=NO
105_PATH=@SAPMOUNTPROFILE@
105_PERMISSION=0755
105_TRAVERSE=FILES
105_USERGROUP=sapsys
105_USERNAME=@LOWER_SAPSYSTEMNAME@adm
106_CHANGE_ON_NFS=NO
106_PATH=@SAPMOUNTEXE@/saposcol
106_PERMISSION=04755
106_USERGROUP=sapsys
106_USERNAME=root
112_CHANGE_ON_NFS=NO
112_PATH=@SAPDIR@/@SAPSYSTEMNAME@
112_PERMISSION=0751
112_TRAVERSE=SUBDIRECTORIES
112_USERGROUP=sapsys
112_USERNAME=@LOWER_SAPSYSTEMNAME@adm
113_CHANGE_ON_NFS=NO
113_PATH=@SAPDIR@/@SAPSYSTEMNAME@
113_PERMISSION=0751
113_TRAVERSE=FILES
113_USERGROUP=sapsys
113_USERNAME=@LOWER_SAPSYSTEMNAME@adm
114_CHANGE_ON_NFS=NO
114_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
114_PERMISSION=0755
114_TRAVERSE=SUBDIRECTORIES
114_USERGROUP=sapsys
114_USERNAME=@LOWER_SAPSYSTEMNAME@adm
115_CHANGE_ON_NFS=NO
115_PATH=@SAPDIR@/@SAPSYSTEMNAME@/SYS
115_PERMISSION=0755
115_TRAVERSE=FILES
115_USERGROUP=sapsys
115_USERNAME=@LOWER_SAPSYSTEMNAME@adm
116_CHANGE_ON_NFS=NO
116_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
116_PERMISSION=0755
116_TRAVERSE=SUBDIRECTORIES
116_USERGROUP=sapsys
116_USERNAME=@LOWER_SAPSYSTEMNAME@adm
117_CHANGE_ON_NFS=NO
117_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@
117_PERMISSION=0755
117_TRAVERSE=FILES
117_USERGROUP=sapsys
117_USERNAME=@LOWER_SAPSYSTEMNAME@adm
118_CHANGE_ON_NFS=NO
118_PATH=@SAPDIR@/@SAPSYSTEMNAME@/@INSTANCENAME@/work
118_PERMISSION=0775
118_USERGROUP=sapsys
118_USERNAME=@LOWER_SAPSYSTEMNAME@adm
120_CHANGE_ON_NFS=NO
120_PATH=@HOME@
120_PERMISSION=0700
120_USERGROUP=sapsys
120_USERNAME=@LOWER_SAPSYSTEMNAME@adm
121_CHANGE_ON_NFS=NO
121_PATH=@HOME@
121_PERMISSION=0700
121_TRAVERSE=FILES
121_USERGROUP=sapsys
121_USERNAME=@LOWER_SAPSYSTEMNAME@adm
[Z_R3LINKS_IND_IND]
101_LINKCONTENT=@SAPMOUNTEXE@
101_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/dbg
102_LINKCONTENT=dbg
102_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/exe/run
103_LINKCONTENT=@SAPMOUNTGLOBAL@
103_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/global
104_LINKCONTENT=@SAPMOUNTPROFILE@
104_LINKNAME=@SAPDIR@/@SAPSYSTEMNAME@/SYS/profile
[Z_SAPDATAPATH]
S1=/db2/@SAPSYSTEMNAME@/sapdata1
S2=/db2/@SAPSYSTEMNAME@/sapdata2
S3=/db2/@SAPSYSTEMNAME@/sapdata3
S4=/db2/@SAPSYSTEMNAME@/sapdata4
S5=/db2/@SAPSYSTEMNAME@/sapdata5
S6=/db2/@SAPSYSTEMNAME@/sapdata6
SAPDATAT=/db2/@SAPSYSTEMNAME@/sapdatat
As you can see there is not an error message, the installation simply stops when the try to check the space available for tablespaces.
Regards -
Im trying to free up some of the space on my macbook pro, its been filled up with itunes hd movies, so i purchased a 1TB portable hard drive and moved all my itunes files to it to free up some space. When i went into about this mac and checked storage, it says i have over 400GB's of back ups. I back up everyday through time machine to my time capsule, not sure what to do, any help is much appreciated! thanks
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself, nor should you disable them or Time Machine.
-
I am a new Mac user and I bought a refrubished Mac that has Mac OS X VERSION 10.6.8. I have been wanting to upgrade to Mavericks, but every time I go to do that a message comes up saying OS X Mavericks cannot be installed on this computer. Is there anyway I can instal it? Better yet how can I look up how much GB of memory I have and the available storage?
1. No, but you might be able to upgrade to Lion. Choose About this Mac from the Apple menu, check that the computer has at least a Core 2 Duo(not Core Duo) CPU, and if so, click here.
2. Check the RAM from the About this Mac window, choose Computer from the Finder's Go menu, control-click the internal drive, and choose Get Info. If the computer has a 32-bit EFI, it can't be upgraded to Mountain Lion or above regardless of the RAM and free drive space.
(111990) -
Want to upgrade from 10.6.8 to yosemite and I have a imac 2007, and enough disk space. but when trying to download, I get a "I can't" due to a list of possible issues, but how to isolate the problem?
Thanks,
josefromaptosCheck that your computer is compatible with Mountain Lion/Mavericks/Yosemite.
To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
iMac (Mid 2007 or newer) model number 7,1 or higher
Your Mac needs:
OS X v10.6.8 or OS X Lion already installed
2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
8 GB or more of available space
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.
If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again. You can make a bootable USB stick to install using this free program.
Bootable USB Flash Drive – Diskmaker X -
Report on payemnt and check info
hi experts.
iam developing a report based on below requirement.
extract vendor master file and A/P transaction file for 4 fiscal years ( 2004-2008) for all company codes. include bith active and inactive vendors in vendor file and both paid and unpaid transactions in transaction file
so iam geting the closed items from BSAK . based on getting
payment and check information from PAYR and REGUP tables . openitems iam getting from BSIK.
with above logic from from BSAK iam getting more data (so many records for each vendor) i dnt want to include all the records.i want just payment transaction for each invoice.
please tell me how can i filter the data.how can i write the logic for it?
thanks in advance.
regards
niruHi abhaas.
thanks for your info,
iam getting all required fileds from tables REGUH, REGUP,PAYR and BSAK,BSIK
i have written the logic like this.
SELECT bukrs lifnr augdt augbl gjahr belnr buzei blart bldat xblnr wrbtr zlsch wskto xzahl
INTO TABLE t_bsak
FROM bsak
WHERE gjahr IN s_gjahr
AND bukrs IN s_bukrs
and lifnr in s_lifnr
and blart in s_blart.
IF NOT ( t_bsak[] IS INITIAL ).
SELECT laufd laufi xvorl zbukr lifnr rwbtr kunnr empfg"
vblnr ausfd rzawe
FROM reguh
INTO TABLE t_reguh
FOR ALL ENTRIES IN t_bsak
WHERE laufd <> space
AND laufi <> space
AND zbukr = t_bsak_bukrs
AND lifnr = t_bsakux-lifnr
AND vblnr = t_bsak-augbl.
IF sy-subrc = 0.
t_reguh_aux[] = t_reguh[].
SORT t_reguh_aux BY laufd laufi xvorl zbukr
lifnr kunnr empfg vblnr.
DELETE ADJACENT DUPLICATES FROM t_reguh_aux
COMPARING laufd laufi xvorl zbukr
lifnr kunnr empfg vblnr.
SELECT laufd laufi xvorl zbukr lifnr kunnr empfg vblnr bukrs
belnr gjahr buzei xblnr blart bldat hkont shkzg wrbtr
mwskz mwsts wmwst sgtxt wskto ebeln waers zterm
INTO TABLE t_regup
FROM regup
FOR ALL ENTRIES IN t_reguh_aux
WHERE laufd = t_reguh_aux-laufd
AND laufi = t_reguh_aux-laufi
AND xvorl = t_reguh_aux-xvorl
AND zbukr = t_reguh_aux-zbukr
AND lifnr = t_reguh_aux-lifnr
AND kunnr = t_reguh_aux-kunnr
AND empfg = t_reguh_aux-empfg
AND vblnr = t_reguh_aux-vblnr.
with this iam getting all the records ( no of records are more)
but my user wannts asking me " Is it possible that the transaction file you are preparing contain more than just the payment transactions for each invoice"
i understand my user want less no of records? i dnt how to filter records ?
regard
niru -
Where is "Reserve space for disk use" in iTunes? Docs are out of date
Hello,
Where did "Resereve space for disk use" go in iTunes? I can't find it any more.
This is major problem because if I want to auto-fill my phone (I don't have time to constantly set up playlists) I then get constantly get errors that my phone is full and that I can't take photos. This is really frustrating.
If I got to iTunes Help, the documentation is wrong and out of date. I have iTunes 11.1.5 and if I go to Help -> iTunes Help and look at this section, it's completely wrong. See attached screenshot.
The whole iTunes UX has become a confusing mess, I hope you're looking for a new product manager for it.
Thank you,
GeoffI am having the same issue. It even tells you that you can reserve space on your phone in the iTunes help, but I can not figure out how to open the Autofill Settings window in iTunes. Here is what it says in help of iTunes 12.0.1.26:
Autofill settings
You can use Autofill to add songs to your iPod, iPhone, or iPad with a single click. You can set Autofill to select songs at random, or you can customize your settings.
You can select these options in the Autofill Settings window:
Other options are available at the bottom of the iTunes window when you're viewing music on your device: -
Java 1.4.1 - Could not reserve space for object heap - need help
I know this problem has been posted before, but I thought this was fixed in release 1.3. I'm using Windows XP/Professional and do the following:
C:java -Xmx2g
Error occured during initialization of VM
Could not reserve space for object heap
C:java -version
java version "1.4.1_02"My computer system has 1 GB of RAM and a 2 GB pagefile, expandable to 3.5 GB. I can get going with -verbose:gc -Xmx1600m -Xms200m, but the GC only gets to about 1 GB before I get an out of memory exception, not even close to 1.6 GB as specified.
I'd really appreciate it if anyone can shed some light on this behavior.
Cheers, EricHmm.
I tried a mini no-operation application with jdk1.3.1 on Linux. It run okay like this:
$ java -Xmx1934M u
$ echo $?
0
$ java -version
java version "1.3.1_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.1_07-b02)
Java HotSpot(TM) Client VM (build 1.3.1_07-b02, mixed mode)
$ cat u.java
class u {
public static void main(String a[]) {
$This however fails miserably:
$ java -Xmx1935M u
Unexpected Signal : 11 occurred at PC=0x401a0cb7
Function name=start_thread__2osP6Thread
Library=/usr/lib/jdk1.3.1_07/jre/lib/i386/client/libjvm.so
Current Java thread:
Dynamic libraries:
08048000-0804c000 r-xp 00000000 03:08 174723 /usr/lib/jdk1.3.1_07/bin/i386/native_threads/java
0804c000-0804d000 rw-p 00003000 03:08 174723 /usr/lib/jdk1.3.1_07/bin/i386/native_threads/java
40000000-40012000 r-xp 00000000 03:08 20686 /lib/ld-2.2.5.so
40012000-40013000 rw-p 00011000 03:08 20686 /lib/ld-2.2.5.so
...This looks familiar:
$ java -Xmx2000m u
Error occurred during initialization of VM
Could not reserve enough space for object heap -
Can I use autofill - but reserve space on iPhone for non-music ?
Hi
I would like to autofill my Iphone with music but reserve space on the Iphone for other media. It seems it used to be possible, but I can't find it anymore on Itunes 11 on my Imac. Any help? THanks!
MikeYou must have gotten an SSD in your mini, then: I didn't think of that initially.
While it is technically possible to mount an iPod and use it in disk mode to store an iTunes library, the iPod's drive is very slow and not designed for the sort of continuous use having it store your iTunes library would put it to, so I would not recommend using it as such. If you don't want to keep your library on the mini, use the external drive, or perhaps better buy another one to use for your library. You can pick up a 500GB USB drive for under $60 if you shop around.
BTW, marking your own post as being the one to solve your problem isn't a good strategy unless you did indeed find the solution yourself and do not need any further responses.
Regards.
Maybe you are looking for
-
How to get column values on item added event receiver
Hi, I have two columns in a document library and one is people or group column and the other one is choice column with check boxes. I want to know how to read column values on Item Added event receiver, so that I can create if statements based on tho
-
My iPad says I have to wait 90 days to use a different Apple ID
Ok, I can kinda understand why Apple is trying to implement these measures, but its going to get into a hole heap of mess in my opinion. I am going through my third iTunes Music Match configuration due to updates etc and its starting to get a painful
-
Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.
Getting "close -ShellExtLoader application" error message when installing PsCC or AiCC.
-
URGENT:PLEASE TELL ME HOW TO RUN BOTH "ITEXT & MYFACES1.0" TOGETHER?
URGENT: HELP PLEASE. ITEXT AND MYFACES1.0.9 COMBINATION USE BLOCKS THE PDF GENERATED ITEXT. We are using ITEXT for PDF report generation in JSF web appliaction, We needed to implement the Fileupload, we tried both MYFACES1.0.9 and TOMAHAWK, both ways
-
LDAP User Synchronization : Password
Hi All, I have a question about LDAP User Synchronization to SU01 in ABAP. Does it create an initial password for the users being Synced? or It stores the LDAP Password in SU01 password field? I have doubt about the second, as LDAP will never return