Ubd.exe has stopped working Windows 7

UBD.EXE is located in C:\Program Files\Common Files\Apple\Internet Services and is part of the icloud control panel app that was installed. During login the system atttempts to load this program and I get the message ubd.exe has stopped working and the program closes.
The result of this program failing to load is that I cannot login to icloud control panel. It just hangs when I try to login.
The problem appears to be related to a group policy setting on the Windows machine. I wrote all the policies and I do not have anything set to block this program. I believe that the program is having an issue with the folder redirection we use at work, re-driecting the appdata folder to a server location. If I take a similar machine and prevent policies from loading, the UBD.EXE loads fine, and iCloud works fine.
As policies are a part of our user environment, giving the suggestion that I turn them off is not an option.
Has anyone else seen this issue, and do you have any recommendations for how to fix it?

E.M.K.E.Y. wrote:
Hi!
I have similliar problem with skype. I´m using Windows 7 on my Toshiba Satellite A300. I already tried re-installing Skype, but it´s still crashing few minutes after log on. It worked for a while when I installed older version of Skype but after few days Skype refused to log me in. I installed new version and it keeps crashing. This is what I get from event viewer:
Název chybující aplikace: Skype.exe, verze: 6.22.81.104, časové razítko: 0x54491226
Název chybujícího modulu: unknown, verze: 0.0.0.0, časové razítko: 0x00000000
Kód výjimky: 0xc0000005
Posun chyby: 0x0c1e9460
ID chybujícího procesu: 0x1e34
Čas spuštění chybující aplikace: 0x01cff519b59d9471
Cesta k chybující aplikaci: C:\Program Files\Skype\Phone\Skype.exe
Cesta k chybujícímu modulu: unknown
ID zprávy: 1f50b070-610d-11e4-85a5-001e33da20a0
Thanks for help!
Please, run the DirectX diagnostics tool (32-bit version).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

Cvhelper.exe has stopped working

Prior to updating Mozilla to Mozilla 4 the download helper would convert downloaded videos to a chosen extension without problems.
However in following with the update to Mozilla 4 the download helper is unable to convert videos. Message reads:
"cvhelper.exe has stopped working windows will attempt to find a solution to the problem and will notify you"

Chances of you getting it to work corectly are miniumal in Windows 8/8.1 see this thread::
http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Help-with-windows-support-A...
Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

Error message: "application.exe has stopped working" under BEX event name on Windows 7 64-bit.

I am trying to run a third party program on my Windows 7 64-bit. It has an executable file.
1. When I double click on this file (appname.exe), I will see a GUI window.
2. In this GUI window, I will have to select a dynamic link library file (appDLL.dll) to load into the appname.exe that will run the application. This DLL file is compiled in Visual C++ 2010 Express based on a C source code under the Release Win32
mode.
3. It is supposed to run after step 2. Instead it give the BEX error message saying "appkernel.exe has stop working." There is no online solution at this time when I select that option to search for an online solution.
I can run this program on my Windows 7 32-bit computer. What does this error message mean? Why is there an issue like this on Windows 7 64-bit? How can I fix this issue? The detailed description of the problem is below.
Problem signature:
Problem Event Name:   BEX
Application Name:    appkernel.exe
Application Version:   0.0.0.0
Application Timestamp:   4f06397d
Fault Module Name:   MSVCR100.dll
Fault Module Version:   10.0.40219.325
Fault Module Timestamp:   4df2be1e
Exception Offset:   0008af3e
Exception Code:   c0000417
Exception Data:   00000000
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional Information 1:   81c8
Additional Information 2:   81c8f46ed31e8fb8b45fcb166d97e96d
Additional Information 3:   eec1
Additional Information 4:   eec16e1825ff7aa9948f00b1f285bbaa
Thanks in advance!
LDL

Hi Brian,
Thank you for the reply!
The third party software provider wrote the source code in C. When I compiled this source code, the DLL file will be created in store in the Release folder in the same project directory of the source code.
I just double check my computer, I have the following Visual C++ packages installed on it:
1. Microsoft Visual C++ 2005 Redistributable
2. Microsoft Visual C++ 2005 Redistributable (x64)
3. Microsoft Visual C++ 2008 Redistributable - x64 9.0.21022
4. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.17
5. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
6. Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.6161
7. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.4148
8. Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.6161
9. Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
10. Microsoft Visual C++ 2010 x64 Runtime - 10.0.40219
11. Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
12. Microsoft Visual C++ 2010 x86 Runtime - 10.0.40219
13. Microsoft Visual C++ 2010 Express - ENU
14. Microsoft Visual Studio 2010 Service Pack 1
15. Microsoft Visual Studio 2010 Express Prerequisites x64 - ENU
16. Microsoft .NET Framework 4.5.2
17. Microsoft .NET Framework 4 Multi-Targeting Pack
From what I understand the Visual C++ 2008 Runtime is included in the Redistributable package.
Leo

Getting "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine

I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.

Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer

ApplePhotoStreams.exe has stopped working on Windows 7 x64

same as the title.
The message "ApplePush.exe has stopped working" appears for a long time, and today, a new message "applephotostreams.exe has stopped working" appeard.
I using Windows 7 Ultimate x64 Chs on HP Z800 workstation.
How can I fix this?

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Applephotostreams.exe has stopped working on Windows 7 PC

applephotostreams.exe has stopped working. Windows 7 PC.

Same issue, Upon start up I get this error (attached)
Have tried choosing check online for solution, it spins and spins, then poof, the dialog box simply closes, nothing, no tab open in the browser with possible solutions, no reply that a solution couldn't be found. If I go into iCloud panel, PhotoStream has a check mark in it and the same error pops up again. HOW do you uninstall applephotostreams.exe? It is NOT listed in my Programs & Features in Control Panel. By doing a 'Search Desktop' I can see it is located in Program files (x86)/Common files/Apple/internet services... how do I properly delete it and reinstall? (It is working FINE between my iPad and iPhone, and until yesterday had been working just fine on my PC (Win 7 64bit) Thank you

Cannot install BI Publisher 10.1.3 Windows 7 setup.exe has stopped working

Hallo!I am trying to install Oracle BI Publisher 10.1.3.4 on Windows 7 Professional 32 bit.When I click on the setup.exe,the following output appears on the cmd prompt
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0 . Actual 5.1Passed
Checking monitor: must be configured to display at least 256 colors . Actual 4294967296 Passed
Checking Temp space: must be greater than 500 MB . Actual 252112 MB Passed
Checking swap space: must be greater than 500 MB . Actual 1900MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from C:\Users\jirungu\AppData\Lo
cal\Temp\OraInstall2011-04-13_09-33-57AM. Please wait ...
When the OUI tries to launch,the following error appears
setup.exe has stopped working.
Is this due to an incompatibility problem?Are there any prerequisites for installing BI Publisher?How can I resolve this?
Thanks.
Edited by: 4joey1 on Apr 12, 2011 11:35 PM
Edited by: 4joey1 on Apr 12, 2011 11:36 PM

I am also facing the same issue and i tried with the following modes
xp mode
vista mode
2000 mode
still i am seeing the same error.
My Notebook is Window 7 Home Premium 64bit & have jdk 1.6 32bit.
Edited by: user5345841 on May 26, 2011 12:10 PM
Edited by: user5345841 on May 26, 2011 12:55 PM

HT1349 I have icloud on my pc with windows vista. Recently, upon startup I receive an error that says applephotostream.exe has stopped working. Windows will close this problem . . . any suggestions. I tried to download the control panel again. no luck

I have icloud on my pc with windows vista. recently, upon startup I get a message that says applephotostream.exe has stopped working. Windows will close this program . . . I tried re-installing the icloud control panel, etc. to no avail. any leads?

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

How do I get rid of "Apple Photo Streams.exe has stopped working" on Windows 7

The error message "Apple Photo Stream.exe has stopped working" keeps popping up when I start my PC which has a 64 bit Windows 7 OS. How do I get rid of this?

I saw that uninstalling and then reinstalling the iCloud control panel on your computer corrects it. I did this and it worked for a while but I'm getting it again. Any ideas?? Thanks!

When I turn on my PC with Vista 64 bits it gives a message "ApplephotoStreams.exe has stopped working. Windows will close program. Please help.

When I turn on my PC with Vista 64 bits it gives me a message "ApplePhotoSream.exe" has stopped working correctly. Windows will close the program.
Please help!!!

Hi, I have the same problem. Has anyone come forward with any advice on fixing the problem?

When starting my windows vista i receive message: applephotostream.exe has stopped working, how do i fix this?

when i start my computer, windows vista serv. pac 2, i receive message: applephotstream.exe has stopped working. how do i fix this

Hello! You've posted your question in the iPhoto for iOS forum. This forum is for questions about using Apple's iPhoto.app on an iPhone or iPad. Do you have an iPhone or iPad that you're synchronizing pictures with your PC? If so, you should probably post your question in the Using iPhone or Using iPad forum. We can also ask the Hosts to move this topic into the correct forum if we know which hardware device you're using.
-Doug

Photo Stream PC-error message "applephotostreams.exe has stopped working" and now additional photos that I want to upload is not uploading.

I sync my devices with a PC running windows. I have turned on Photo Stream on my PC, iPhone4S & iPad2.
On my PC it creates two default folders in Pictures called "My Photo Stream" and "Upload".
Instructions says that you can add photos to the "Upload" folder and it will automatically upload to your "My Photo Stream" folder and when your devices are connected to wi-fi they will upload to each device and show up in the "Photo Stream" section of Photos.
I was able to upload 50 photos but then I got an error message that applephotostreams.exe has stopped working.
How do I fix?

I was having the same problem. Earlier in the week, I was able to drag a few photos to the upload folder and they synced correctly. Yesteday, I dragged different photos, and I got the "applephotostream.exe has stopped working" error.
The solution - for me, at least! - was to reduce the size of the pictures being uploaded to the photostream. While all of the pictures were jpegs, the first set were ca. 800K (3800 x 2500), and the second set were ca. 2.5 MB (4000 x 2000). When I reduced the resolution of the last set by a factor of 4 (ca. 600 K, 2000 x 1500), they uploaded without a hitch.
Based on this admittedly sketchy experiment, it looks like Apple has a max picture size limit, apparently based on file size rather than picture resolution). Perhaps < 1 MB? To be rigorous, I should complete the experiment - leave the resolution of the second set of pictures alone and reduce file size by reducing jpeg quality.
Has anyone heard about a picture file size limit?

PProHeadless.exe has stopped working error when opening projects in Adobe Media Encoder CS6

Hi, I recently upgraded to Adobe Cloud CS6 and am having problems with the Adobe Media Encoder CS 6 (version 6.0.1.31 64-bit).
When I try to add Adobe Premiere projects in AME, it sometimes gives me the following error:
PProHeadless.exe has stopped working
I tried rebooting, and it still gives me the same error. Sometimes the project will load, sometimes it won't.
The Premiere projects contain a H.264 .mov file coming from my Canon T2i. I also added an overlay logo to the bottom right of the video that I created in Adobe After Effects, which only contains text, no effects, no motion, etc. Sometimes I also have a .wav file recorded from a Zoom H4n, but not always. I usually edit those in Adobe Audition with the remove noise feature.
I am running on Windows 7 Ultimate 64-bit. I'm using an i7 with 16GB ram and an ATI 6870 video card.
I have the LUT buddy plugin installed.
It will give me the error the first time I try to load the project, and the connection to Dynamic Link Server will fail. Afterwards, if I try to load the project again, even if I restart AME, it stays stuck in the Connecting to Dynamic Link server...
Any help anyone could provide would be appreciated.

Hi Dima,
Thank you very much for your prompt reply. Dragging the sequence from PPro to AME made AME lock up. But your second suggestion of exporting the video directly from PPro seems to be working. I still have 6 minutes to go, but at least it got up to 25% so far, so everything seems good.
Thank you once again!
(although it would be nice if I could go through AME just in case)

Sqldeveloper64W.exe has stopped working

Problem Summary
Receive error: sqldeveloper64W.exe has stopped working when attempting to open .sql files
Problem Description
Within SQL Developer 4.0, I've gone into Preferences > File Types, found the .sql extension and checked the box that says Open with SQL Developer. I've gone to the Set Associations control panel in Windows 7 Professional 64 bit and confirmed that the Current Default is set to sqldeveloper64W. I've used the CMD function to access regedit, deleted the file associations for .sql and set all preferences again. If SQL developer is not already open on my machine and I attempt to open a .sql file, the application launches fine. If I try to open additional files from windows explorer or windows search, I get an APPCRASH indicating that sqldeveloper64W.exe has stopped working. I click close the program and sql developer remains open, but my file has not opened.
Error Codes
sqldeveloper64W.exe has stopped working

This problem has been plaguing me for ages too, but I think I've finally found the solution from this post:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/problems-with-file-association-in-windows-7-64-bit/8a84fcec-22df-4942-8e35-d98dbe96e327
"In regedit: Navigate to Computer\HKEY_CLASSES_ROOT\Applications and find your .exe name.
Navigate under its name to shell>open>command. In the Default change its location to the actual location of the executable, hit okay and then try and reassociate the file type as you normally would."
In my particular case, I browsed to Computer\HKEY_CLASSES_ROOT\Applications\sqldeveloper64W.exe\shell\Open\Command
and changed the (Default) value
from "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper\bin\sqldeveloper64W.exe" "%1" %*
to "C:\oracle\sqldeveloper\sqldeveloper-4.0.2.15.21-x64\sqldeveloper.exe" "%1" %*
And now the file association works correctly, and now with sql developer already open, I can open another .sql file from windows explorer. Fingers crossed this is finally fixed!
Keith

Kdbsync.exe has stopped working - win 7 64 bit

I am running Win 7 64 bit on an HP Pafilion HPE h8-1360t. After last week's round of updates my computer will no longer play mp4 files, the Media Center will no longer come up (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the HP Magic Canvas also won't come up, and the mysterious message "kdbsync.exe has stopped working" comes up when I reboot.
After hours of reading forums, I have found that it appears to be related to the AMD grapics card update. My computer has an AMD Radeon HD 7570 card.
On the AMD site this is listed as a legacy card for XP computers. I am not sure why HP installed it in a computer running Win 7 64 bit with an Intel Core I7 CPU. This does not give me confidence in HP equipment.
The AMD utility correctly detected my card and told me that I needed a driver called:
14-4-win7-win8.1-64-dd-ccc-whql.exe
But when I clicked on the Down load button, I got the message, "Could not conntect to server. Could not parse error."
I did not find any such driver on your website.
How can I get my Media Center working again?
This question was solved.
View Solution.

The idea of turning off all the non-Microsoft services scares me to death as I now have my computer running the way I want it to.
I also posted on the AMD forums as I had determined that their board was the offending piece of hardware:
http://forums.amd.com/game/messageview.cfm?catid=454&threadid=173935&forumid=11 You might want to read my reply to the agent who helped me.
Basically I had to uninstall all AMD drivers and sotware using Control Panel/Programs & Features and then run the AMD Clean Uninstall Program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx
Then install drivers from here:
http://support.amd.com/en-us/download/desktop?os=Windows+7+-+64#amd-catalyst-packages
I would not recommend that you install this set of drivers unless you are SURE that they are correct for your hardware. I could not use the Steps 1-5 on the AMD site because the last step required that you pick the operating system that your hardware is running. The video card that HP installed in my "latest and greatest" computer of a year ago was so old that the only operating systems offered in step 5 were XP and Vista! Be aware that HP does use legacy hardware in its newest computers.

Ubd.exe has stopped working Windows 7

Similar Messages

Maybe you are looking for