Ubuntu along with Windows 7 in Z220 workstation

Hello,
is it possiable to install ubuntu along with windows 7 in HP Z220 CMT Workstation
if it is yes, is all the versions of ubuntu will supported by workstation or is there any specific vertion for this?
can i have the procedure to install ubuntu along with windows 7
please someone help me
Thanks in advance

Hi:
You may also want to post your question on the HP Business Support Forum -- z Workstations section.
http://h30499.www3.hp.com/t5/Workstations-z-series-xw-series/bd-p/bsc-272#.VO3nG3l0y9I

Similar Messages

How to install ubuntu along with windows 7

I have HP 15-r062TU. In that i am install windows 7 64bit os. Now i would like to install ubuntu 12.04 or 14.04 LTS os along side windows 7.
For first booting from usb/cd-rom it shows along side with windows after hitting continue button it reboots from the begin and starts all stages and shows without alongside with windows option during installation.
Please help me. Thanks in advance.
I made a mistake that i was completely removed ubuntu operating system includeing HP_Tool hard disk partion also from pre installed ubuntu os.

Hi,
Please use the following instructions:
http://www.dedoimedo.com/computers/dual-boot-windows-7-ubuntu.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am tryed to install ubuntu 14.4 lts along with windows 8.1 in my HP 2000 - 2d49tu

I am tryed to install ubuntu 14.4 lts along with windows 8.1 in my HP 2000 - 2d49tu, but ubuntu does not detect windows 8.1 in the system

It is critically important for you to have created Recovery media before attempting to create a dual boot installation. Make sure that it works by performing a Factory Image recovery.
Make sure that the Ubuntu type matches the Windows 8,1 type. That is critical for a dual boot installation.
A 64-bit OS type will see or recognize other 32 and 64-bit operating system.
If you have a 32-bit Ubuntu it will not see Windows 8.1 as being present.
A 64-bit version of Ubuntu will work well with a 64 or 32-bit version of Windows 8.1.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I have VMware Fusion installed on my computer along with windows 7. I'm able to use Visual Studios 2012

I have VMware Fusion installed on my computer along with windows 7. I’m able to use Visual Studios 2012 & 2013; however, when I try to install SQL Server is says I don’t have a valid installation folder. So I guess my question is, can you install SQL Server to a MAC?
Thanks!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Upgrading R / 3 4.7 system to ECC6.0 with EHP4 along with windows 2008

Hi All,
I am looking for your feedback about the plan for upgrading our Landscape to ECC 6. with EHP4 from R/34.7E.
Current Environment: R/3 4.7X110 with SQL 2000 in 32 bit windows 2003
Planning to upgrade to the level of : ECC6.0 with EHP4 64 bit windows 2008, SQL 2005 Database
Based on the previous experience in upgrade I have planned in the following ways.
Since my basis component is in the level of 63, its possible for me to restore the SQL 2000 database in SQL 2005 (Using System copy tool )
Step 1: Migration of OS / DB using system copy tool (R/3 4.7 with SQL 2005 in 64 bit Windows 2003 ), Then will leave the system for testing for some period and after the confirmation, planned to start the upgrade
Step 2: By meeting all the prerequisites, Planned to upgrade to ECC6.0 with EHP4 on the OS / DB upgraded system.
Step 3: Once the upgrade completed / With the confirmation from the functional and technical consultants, I planned to upgrade the windows 2003 to windows 2008 using system copy tool.
Note: I am not using SQL 2008 - Project decision.
The above mentioned plan is the only way(proper way) for doing such activities or is there any other way to shorten the project.
I should not ask the below question (Even after reading PAM and SAP note 1054740), But kindly regret me for asking this one, out of own curiosity, i am asking the below one.
1. Is there any possible to install SAP R / 3 4.7 in windows 2008 with 2005 (This will help me to shorten the project). I am completely aware that SAP wont support R/3 4.7 with windows 2008, if its not at all possible is there any other work around for me to shorten? Let me know your suggestions and thoughts
Your valuable inputs will help me to proceed further with the plans (I surfed the SDN and read master guides already) . I really want to make sure , the way which i am going is the right one.
Thanks and Regards
Vijay Kumar

Hi Jitendra,
Hope you should check the PAM again , Its supported for sure and also for upgrading to EHP4 - SQL 2005 is the Prerequiste.
Hi Abhi and Others,
Thanks for all your support.
I have successfully completed the project for my landscape and it was a great success too.
As you all said, since I had the hardware availability and time frame as well. Hence, I have tried both the possibilities.
Note :I would prefer and stick with the SAP proposed and supported way and even for my project I have followed the same. So I would recommend to stick with SAP supported one.
But for the own technical interest I have tried the other option as well which is not supported by SAP and also faced some typical issues as well / but solved on my own with some tricks and other activities. So, this option is also possible but highly risked one and of course(more importantly) which is not supported by SAP. So, i would recommend to go with the SAP recommended way.
Thanks for everyone and I am closing the thread
Regards
Vijay

BlackBerry Desktop Software 6 doesn't go along with Windows 7 ?

I tried to install applications using BlackBerry Desktop Software 6 on my Windows 7 laptop, a weird thing happened: after selected applications to install and hit apply button, the software wouldn't go downloading or do anything, just went back right away to refresh the application list.
I've got other couple of computers with Windows XP, Vista and Windows Server 2008, so I tried the software on them, no any problem.
Anybody get the same problem? What the reason could be?

One of my laptops is running Windows 7 and I just recently, and successfully, installed the BlackBerry Desktop Software. I would try going into your computer's Control Panel and seeing if the Desktop Software did in fact install. If it did, then uninstall it and try again. If you are still having issues, try running the installation in Compatibility Mode. The instructions on how to run something in this Mode through Windows 7 are located here: http://www.sevenforums.com/tutorials/316-compatibility-mode.html
To find the .exe file of the BlackBerry Desktop Software, navigate to My Computer (Windows Key + E) > Right-Click on the CD in the Drive > Select 'Open'. I have attached an image below for visual reference.
I hope my response helped you! If you like it, give me a kudo!

Solaris installation on toshiba laptop along with windows

i installed solaris 10 on my toshiba laptop,having windows.The solaris get installed but i am able to use only through commands.the gui is not showing.while installation also the gui is not showing but when installed in virtual bow gui is showing at the time of installation and after installation i am able to use the gui of solaris 10 and works fine.dont know what is the reason while installing on laptop directly

The reason is simple why it's work on VirtualBox. In VBox, this software emulates a generic graphical chipset. In one phrase, we have the same chipset for each machine type.
Look if Solaris 10 can run with VESA driver and when not you can still share the chipset reference that you have and I can try to see if this is supported or not.

Every time I turn my computer on it starts freaking out. The mouse starts moving on its own along with windows coming up and moving off the screen. Also the windows get bigger on their own and the screen slides around like some one else is doing it.

I have checked for viruses, restarted it and nothing works. It doesn't do it all the time just most of the time now.

Try resetting your PRAM by restarting, then holding <CMD>+<OPTION>+p+r until you hear the start up chime twice, then release the keys and allow to boot up.
If that doesn't work try resetting the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
If those two items don't help take your machine to your nearest Apple store and see if they can assist.

Sync with Windows Address Book just hangs

I have iPod Touch 4g, iOS 4.1, iTunes 10.0.1.22, Windows XP (up to date). I sync'd my Windows Address Book to the Touch without issue, I made some updates on the Touch, and now when I try to sync, it just hangs at trying to sync the contacts. No errors, it just indicates that it is syncing. iTunes doesn't actually hang, I can cancel the sync, and I can still sync songs, and it still backs up fine as first sync step.

As far as I am aware, "identities" is an Outlook Express concept that was dropped by Microsoft some time ago in favour of separate User Accounts along with Windows Address Book being replaced by Windows Contacts. I am also not 100% sure that iTunes will sync with Windows Address book. Do you see it on the drop down menu in the Sync Contacts tab?
If you do and if iTunes will sync with Windows Address Book you should only see the contacts associated with the identity you are using and shared contacts. If iTunes then syncs, it should sync with the identity you are using at the time of the sync.

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7

Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Transferred itunes library from Windows XP PC to new Windows 7 PC. plugged in 3rd gen Ipod. Ipod icon appears along with playlists, music etc. Songs are grayed out and won't play. Please help!

I recently transferred itunes library from windows XP PC to new Windows 7 PC. The transfer was successful, however when I plug my 3rd gen Ipod Nano into the new PC, the Ipod icon appears along with the music, playlists, etc. The songs are shown but are 'grayed out' and wont play or sync.The 'Devices & Printers' window in new PC shows icon for Ipod driver & is OK. The icon for the Ipod appears but depicts a delta shaped warning icon that states that the Ipod is'not operating properly'. Tried troubleshooting. The troubleshooting message states the the Ipod is 'disconnecting'. Can you help me with this problem?

Then, I dropped the entire itunes file from the old PC (XP) into an empty external drive.
That "itunes file from the old PC"? Is that the iTunes folder, from the old PC, that was in the user home folder's Music folder?
All of the library, playlists, etc. from the ipod as they always have been are shown, by they are 'grayed out' and will not open or play.
That's on the iPod, correct? Are all of your old playlists in iTunes, from the old PC, still there in iTunes on the new PC? Are the songs in iTunes still playable?
This document provides the steps to transfer a complete iTunes library between two computers. See the section called External drive.
iTunes: How to move your music to a new computer - Apple Support
There are many steps, but this is a summary. (1) On the old PC, consolidate all of your iTunes data into the iTunes folder. (2) Copy this iTunes folder to the external drive. (3) On the new PC (that has iTunes installed but NOT running), replace its existing iTunes folder with the one from the old PC (on the external drive). When you run iTunes, it uses the iTunes folder from the old PC, and it should look like iTunes on the old PC (with all the playlists, ratings, play count, etc.), and your iPod will see the iTunes library as the same iTunes library (because it is the same library).
If you did something different, and the old PC is still accessible, you may want to try it using the method from the linked document.

I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes. But I can't get it to work. I also tried downloading Quicktime and couldn't get it to download.

I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.

iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?

I updated to 3.6.15 and every time I open Firefox the Thank You for upgrading window pops up along with my normal homepage. How do I get rid of that?

This link shows how to do that - https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox

Dual-booting Ubuntu 13.04 with Windows 8 on a U410

Hi!
I have a U410 on which I would like to dual-boot Ubuntu 13.04.
I've run it up on a live flash drive, everything works OK.
When it comes to the actual install I'm a bit nervous as I've never had a machine like this before, it's only two months old, and I've never had a machine where I didn't have a Windows install disk!
The installer sees the 500 GB HDD, so I assume I can create a partition on that.
Where do I put the boot loader though? It's telling me it wants to put it on the SSD.
Is this where it should go?
Are there any detailed steps listed anywhere?
I'm assuming that because the installer sees all the partitions and disks, I don't need to turn off UEFI or RAID....
Thanks!

I've been using Ubuntu on this computer since 12.04 was released and since this thread wasn't closed I'll provide some closing documentation for other u410 users. Ubuntu is growing in popularity and this should help with new users.
Please note that I bought a u410 Ultra with Windows 7 (intentionally) and things may have changed since the new Windows release.
________Intro________________________
It is best to know how Intel Rapid Start Technology works before messing with your partition table. Windows is installed on the HDD (500/1tb depending on model) with a 2nd partition holding the drivers necessary for one-push recovery. Note that modifying Intel RST, any files on the 30gb SSD or removing the recovery partition with the windows drivers will break one-push recovery. Because of this you should learn how to reinstall windows 7/8 using a USB driver before you continue.
________ Prep_________________
Assuming you know how to install Windows, and you backed up the recovery partition onto your USB drive (or got drivers from the laptops support page on Lenovo.com it is now time to install Ubuntu.
Download the Ubuntu ISO from their website, and download univeral usb installer from here:
http://www.pendrivelinux.com/downloads/Universal-USB-Installer/Universal-USB-Installer-1.9.3.6.exe
Usage of the USB installer is pretty straightforward, I can follow through with a how to if a reader needs it.
__________ Prerequisites____________
Now that you have a bootable USB drive, reboot into the computers BIOS and disable 'Intel Smart Response Technology'. This takes frequently used Windows files from the HDD and puts them on the SSD for quicker access. Removing the SSD or modifying it's contents only has the side effect of Windows booting and running a little slower.
Installation
Now you have three options:
-If you primarily use Windows, you can reinstall it onto the 30GB SSD
-Install Ubuntu on the SSD, and leave windows untouched
-Your last option is to put both Ubuntu and Windows on the HDD and not use your SSD at all.
I chose the 2nd option, I put ubuntu on the SSD. In addition to putting Ubuntu on the SSD for SSD speeds, I split my HDD in half. 500gb for Ubuntu and 500gb for Windows.
When I got to "Where to install Ubuntu" I chose custom. Here you will see two devices /dev/sdax (x being a number assigned to the drive, usually 1) and /dev/hdax. SD for SDD and HD for HDD.
The SSD should have two paritions, one is a fat32 partition with the name 'efi'. Dont touch this, it is used to store secure boot keys so the computer will boot Windows. Ubuntu is versatle and can reuse the Windows efi file.
The rest of the SSD is a ~30gb ntfs partition. Since you disabled Intel RST the SSD isn't going to be used at all. So you can install Windows or Ubuntu here for fast boots, it can't however fit both comfortably.
In this guide I will install Ubuntu here, creat an ext4 partition here, and for the mount point choose /
Switch to /dev/hda and shrink the Windows partition to half this size, do this by dividing the total disk space by 2 (the partitioning software counts in increments of 1024 so if you want a different size you can choose so with some simple math).
Most seasoned Linux users recommend making at the very least a 2nd partition for /home. In Linux this is where all your personal data is stored, you can reinstall any Linux distro and if you mount /home all your files will be right where they used to be. Its similiar to having a Data partition or a separate Harddrive for data if you're using Windows. In linux the transition from SSD is HDD seamless, it's all done in the background for you. I have done exactly this.
Now that your Windows partition on the HDD is shrunk down. Creat an ext4 partition in the newly freed space, for the mount point, click the drop down menu and choose /home.
Finish the installation.
________ Jumping through hoops______________
For me, 12.04.1 and 12.04.2 didn't install correctly because it didn't properly use grub-uefi. 12.10 installed and booted fine and when I used 13.04 on release day it didn't install properly (this could've been changed, if you check 'install updates while installing in present day it may go through.
Because of this issue, of not booting 13.04 (raring) I installed 12.10 and ran these commands in terminal:
$ sudo apt-get update
$ sudo apt-get install updates
$ sudo apt-get dist-upgrade
When you reboot you will see an option for Ubuntu and an entry for Windows.
________ Conclusion / TL;Dr _______________-
My disk scheme looks like this:
SSD:
262mb efi partition
30gb ext4 partition mounted point: /
HDD:
500gb ext4 mount point /home
500gb NTFS partition 'Windows'
I recommend updating Ubuntu Raring and rebooting one more time, updates will push you to the newer 3.8 and 3.9 Linux kernels which a much more power efficient and run well on Sandy and Ivy Bridge Intel computers.
I hope this helps, if anyone has any questions feel free to ask. I hope this imformation is worth the nasty bump.

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Ubuntu along with Windows 7 in Z220 workstation

Similar Messages

Maybe you are looking for