UC 220 M3 with Flexi Flash

I just got in 6 UC220 M3 servers with the new Flexi flash option.
There is documentation out from cisco that states to use Flexi Fash to store your vmware boot files.
Here are the documents that I have reviewed on the cisco web site.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns224/ns944/white_paper_c11-718938_ps10493_Products_White_Paper.html
Then here are the server install instructions on the UC220m3 server and itsays to install vmware on the raid 5 disk array...
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/virtual/CUCM_BK_CA526319_00_cucm-on-virtualized-servers_chapter_00.html#CUCM_RF_C38CF3EA_00
The TAC best practices doesnt even mention the Flexi Flash/disk.
Anyone have a recommendation?
TIA

Similar Messages

Flash Islands Tutorial I - Confusion with Flex/Flash Builder Versions

Hi Guys,
i am new to the Adobe Flex/Flash Islands technology and tried to implement Tutorial I by Thomas Jung. Unfortunately i am confused by the various different versions for flex and the corresponding IDE's.
As far as i understood SAP at the moment only supports Flex versions up to version 3.3 for NetWeaver 7 EHP1. Furtheron the Adobe Charting Components (used in the Tutorial) seem to be part of the Flex Builder Professional Version only.
So i went to the Adobe Website and looked into the products and download areas. All i found was Flash Builder 4.5 Premium and the various Adobe and Open Source Flex SDK versions. I am using Flash Builder 4.5 as a trial right now. Unfortunately the Charting Components are not included.
So the question i have is whether the Charting Components (e.g. <mx:BarChart /> )are included in the non Trial version of Flash Builder 4.5 Premium or whether there is any possibility to get them as an Add-On. Or do i have to use Flex Builder 3 Professional (i found no information about this on the Adobe Website)?
Additional Hint:
I found out that when i compile the poject with Flex SDK vesion 3.6 or higher, the compiler knows the <mx:BarChart /> tag. Also in that case the view designer is working. However FlashIslands is only supported up to Flex SDK 3.3. But when i choose 3.3 the <mx:BarChart /> tag and some other related tags are unknown.
This is a really anoying issue.
Best Regards,
Dirk
Edited by: Dirk Jäckel on Jul 19, 2011 12:14 PM

HI Dirk,
wtith Web Dynpro, you can only use Flex SDK version 3.3 and downwards. You can download the SDK here [http://opensource.adobe.com/wiki/display/flexsdk/DownloadFlex3]
Flash Builder ships with Flex SDK 4.5 which is not compatible with WDA flash islands.
As for the charts library, which Adobe referes to as the Data Visualization Component, it is also available as a separate download which can be unzipped into the same directory as the Flex SDK -- the library is available here [http://www.adobe.com/cfusion/entitlement/index.cfm?e=flex3sdk]
I must say I am also confused, because as far I can tell data visualization component is not included in 3.3, but SAP makes no mention of this. Hopefully someone else can enlighten us on this issue?

Is there any difference in an android .apk file developed with flex/flash?

Is there any difference in an android .apk file developed with flash compared to one developed with flex?
I just made a test application and the textinput reaction time is way too slow. I used Flash to build it.

Thank for the response.
What I actually wanted know though was if there is a difference between an android app developed with falsh cs5 compared to an app developed with flash builder 4.

Interactive floor plans with Flex / Flash builder

Hi,
I'm totally new to Flex and Flash builder and pretty strong in Java back end technologies.
We're having a requirement of visually present the data center floor plan with the server racks in it. Following features has to be supported.
1) Zoom in and out of the data center rack areas
2) Clickable racks, which shows the details of the servers which it's carry (This has to be retrieved from the database)
3) Click and reserve space in the data center floor (to install new racks)
How am I going to achive this ?
Any suggestions / tutorials highly appreciated.
Thanks in advance,
Dushan

My first suggestion is to do a mockup using Flash Catalyst. Its pretty intuitive. Nail down the details. Look at some of the code that it generates, and then go from there.

PDF with Flex/Flash not running on iPhone

Dear all
I have a pdf document including Flex content running perfectly in the Acrobat or Reader on Windows.
On the iPhone the Flex is not shown.
Is there any solution to this?
Many thanks

Flash has never been and never will be supported on the iPad. Furthermore, Adobe has withdrawn Flash support from other mobile devices so you're out of luck.

Using Flex 3.5 with flex/flash builder 3

We have a flex builder 3 professional license. We would like to switch to the 3.5 flex SDK to use features added in 3.4. The flex builder we have only comes with 3.2.
Is it possible to update to 3.5 flex sdk using Flex builder 3?

Yes, go to this url and download these files:
http://opensource.adobe.com/wiki/display/flexsdk/Download+Flex+3
Unpack the zips and put the files here:
C:\Program Files\Adobe\Flex Builder 3\sdks\3.5

Use Native iOS/Android APIs with Flex/Flash Builder 4.5.1?

Is there any documented, official way to access the native APIs on mobile devices (iOS and/or Android, specifically)? Perhaps some sort of ExternalInterface support? My most important need for this is importing 3rd party SDKs, the first one being the Facebook iOS SDK for Single Sign-On.
If not, is support for native APIs planned? Has anybody figured out an unofficial way to access the native APIs?
Related:
http://forums.adobe.com/thread/865548?tstart=30
http://forums.adobe.com/thread/785130
[Re-posted here from Flash Builder forum]
http://forums.adobe.com/message/3754084

Nothing official is available; although there is an AIR for TV Document on building ACtionScript extensions to AIR. I expect that "approach" will show up in other AIR runtimes.
You can look at this for an "ad-hoc" way to do it: http://www.jamesward.com/2011/05/11/extending-air-for-android/

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Flash Builder 4 with Flex SDK 4.0 for Intel App Up

There is some misinformation on Intel AppUp and the Melrose FAQ about being able to publish with Flash Builder 4.
Intel App Up Program Submission
According to http://appdeveloper.intel.com/en-us/article/adobe-air-packaging-guide-atom-developer-progr am-submissions
"AIR app must be built using Flex Builder 3 with Flex SDK 3.5a. Currently Flex Builder 4 with Flex SDK 4 is not supported."
Melrose FAQ
According to http://learn.adobe.com/wiki/display/melrose/Melrose+Developer+FAQ
"Q: Are there system requirements for enabling try and buy in AIR apps using Melrose?
A: You must have Adobe Flex Builder 3 or greater and Adobe AIR 1.5.3 or greater."
Is the Intel App Up statement correct? If it is, could I get an explanation why? I've been waiting for the last 3 months waiting for the Melrose SDK to deploy to Intel App Up and now I can't even submit my application.
Thanks.

The current version of Melrose supports Flex 3.5 SDK for AIR applications running on AIR 1.5.3 runtime or higher. You can use Adobe Flex Builder 3 with Flex 3.5 SDK or Adobe Flash Builder 4 with Flex 3.5 SDK.
Support for Flex 4.1 SDK for AIR applications running on AIR 2.0 runtime should be available within a few weeks. Please note that we will not be able to support Flex 4.0 SDK because of certain technical challenges.

Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

Is Adobe FLash builder 4.7 compatible with flex sdk 3.5?

Kind of. I never actually solved the bug, but I did make it past the install.
Upon running Adobe Flash Builder 4.7 Plug-in Installer it appeared to crash and only load a blank screen with a single unclickable button. It wasn't actually "hanging", and would react when I clicked on the program menu and moused over "Services". This would allow my clicks and keystrokes to register with the program, but only after I mouse over the "Services" menu item. For example, you need to click "okay", then mouse over "Services". When you want to enter text you need to click in the text box, and mouse over "Services". Then you need to type the text you want, and mouse over "Services" to see the text appear. It's a PITA, but you can get through the install by doing this.
After installing the FB plug-in starting eclipse with editors open appeared to cause errors. If this happens, this is because it seems that FB attempts to load when eclipse starts up. Close all editors and restart eclipse. The Welcome page for FB may pop open up. At the bottom there is a check box that will keep that form loading - check it. If the page does not open when eclipse starts, then open up an MXML file. The Welcome page should load, and you can check the box.
I hope this helps you move forward. Also, if you find an actual solution please let me know.

Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

My applications built with Flex Builder 2 and 3 do not start in new versions of Flash Player and/or new browsers when run remotely. I have not been able to test all combinations of FP and browser versions but there is no problem with applications built with Flash Builder 4. Does anyone have info on this?

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

How do I import SWC files created with Flex info Flash CS4?

I've created very nice UI component using Flex 3 and I have exported it into a SWC file.
How can I import it into Flash CS4 to use it there?

Hmm... if you happen to be familiar with C#, then you may probably know about the problem of P/Invoke (this is a command that lets you access Windows API through C# code, which will apparently prevent it from functioning on other OSs).
What happens with Flex framework is somewhat similar to this. I.e. it relies to much on the features of Flex compiler and the components of the framework create a lot of cross-dependencies, which makes them barely usable outside the framework.
So, if you have time and doing this just as a matter of learning, I'd suggest you start an AS project in Flex builder and advance with it compiling it both with Flex and Flash to see if there are any differences (basically, once you see it doesn't compile / doesn't behave as you'd expect in Flash, you'll know you used something that is specific to Flex). These would be mostly meta tags, like [Bindable] for example.
And, if you need any tutorials on how to code in pure AS, then, well, there are really to many So that you can even choose what's appropriate / goes better with your learning habits.
If you like video lessons, there're tons of them at gotoandlearn.com, if you prefer reading documentation, here you go: http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/class-summary.html
if you prefer forums / written tuts, then, kirupa.com, actionscript.org, flashkit.com as well as Adobe forums will provide you with a lot of information.

Looking for a Great Flex/Flash Engineer

Hi All,
Apologies if this isn't an appropriate place for posting such a request, but I'm a long-time user of Adobe Flash and Flex. Despite the uncertainty surrounding the future of Flash and Flex we feel it's still the best platform for delivering rich Internet applications. We're on the hunt for a couple great engineers to join our team, and we're thinking some of you might be on the looking for positions that allow you to leverage your Flash and Flex development talents.
Information about the UI position is included below. Please check out http://coincident.com for more information about us and to see our other posting(s).
Thanks!
-jmh
President & Founder
Coincident, Inc.
User Interface Engineer
Coincident. We’d like to make it a household name but we’re going to need your help! We’re a small clean energy company in Boston, Massachusetts and we’re developing an automated energy management platform for residential and small commercial energy consumers.
We think it’s a potential game-changer amongst a sea of competing interests and apparently so does the U.S. Department of Energy. They’ve backed our engineering efforts with innovation research grants to help us commercialize our technology.
We’re on the hunt for a talented programmer with the ability to fuse design and technology like no other. You’ll help craft the user interface components that make our energy management system the most attractive and easy-to-use on the market. Ease-of-use, visual appeal, and intuitive behavior will be your raison d’être. Bring a passion for energy efficiency, rich internet applications, consumer electronics, and mobile development platforms.
This is a paid full-time position offering compensation and equity options commensurate with your experience and ability to make significant contributions to the development of our product.
If this sounds like a job you’d love, keep reading to see what we’re looking for.
Does this sound like you?
Talent for developing dynamic and rich Internet applications
Experience with Adobe Flash, Flex, HTML 5, and JavaScript
Versed in UI development best-practices and supporting technology frameworks
Knack for implementing elegant user interface controls and components
Unparalleled ability to anticipate user behavior and response to designs
Ability to work and collaborate effectively with creative and technical teams
Experience integrating web services and Java server-side technologies
Aptitude for mastering new technologies in short periods of time
Ability to work autonomously on new product features with minimal instruction
Proficiency with vector and bitmap graphics libraries, applications, and tools
Extra credit for mobile development skills for iOS and Android platforms
Coincident is located near South Station in Boston’s Innovation District and is a member company of Greentown Labs, Boston’s first and only clean technology incubator. Resumes and cover letters should be addressed to [email protected].
United States Citizens and Residents only, please.

Another option: I bought a nice one at REI for PWB in March, and now use it for MBP. Has space for my wacom tabet and also small 3x5 or so firewire HD, and of course power adapter and misc stuff. notebook compartment can be removed and carried separately. Very happy with it.
George

AIR application with Flex 4.5 will not render content. What gives?

OK,
So I've upgraded to Flash Builder 4.5 Premium and I am unable to develop desktop AIR applications with the 4.5 Flex SDK. I start by simply creating a brand new AIR application using the default SDK (Flex 4.5). I set the title property on WindowedApplication and include a simple Label component. The project compiles fine but when I run the application all I see is the adl window in the dock but that's it. If I modify the Main-app.xml file to set the visible attribute to true, I will get a small window but there is no content although the output window shows the application swf being loaded. Checking the release version of the Main-app.xml file shows the correct path location to the swf.
Here is what I've tried so far:
Install/reinstall Flash Builder, 4+ times
Downloaded the trial installation twice
Downloaded the SDK's for 3.6, 4.1 and 4.5.0. I then copied each SDK folder and merged the AIR 2.6 SDK with each copy. So now I have 6 SDK versions; one pristine and the other with the AIR 2.6 SDK merged. I then added each SDK individually and created an AIR desktop application for each. Each and every one works fine with the exception of the two 4.5 SDK's. They will not render content.
I created a simple creation complete handler for the application that declares a simple variable and assigns a value to it. I then put a break point on the assignment and it never gets caught. More evidence that the swf isn't getting loaded.
The computer I'm running on is a Mac Book Pro with Snow Leopard 10.6.7. If I create a web project in each of the 6 SDK's, those will work just fine. What the heck is it with Flex 4.5 and the AIR 2.6 SDK on this machine? I have the AIR 2.6 runtime installed as well as a number of AIR applications that work just fine. I also tried my 4.5 test on my windows machine and that worked like a champ.
I am completely out of ideas. Finding information has been difficult because everyone is all about mobile so searching for desktop issues is a losing battle. I realize this is a long email but I'm desperate for help. There must be someone out there that knows more about the low level interaction between Flex 4.5/AIR 2.6 and the OS.

Well, I finally found the issue, a corrupted mm.cfg file in /Library/Application Support/Macromedia. I deleted the file and then adl ran just fine.

Data connection between Java Webdynpro - Flex Flash Island

Hi,
I'm developing a Java Webdynpro with connection to a Flex Flash Island. I'm using Flex 3.2.
I've already set up the connection from WDJ to Flex, by using Events and the FlashIsland.fireEvent method, this all works fine. Now I'm trying to update a value in WDJ, to be updated in Flex. This gives the following error:
Error: Error #1023: Stack overflow occurred.
     at Function/http://adobe.com/AS3/2006/builtin::apply()
     at mx.binding::Watcher/wrapUpdate()
     at mx.binding::PropertyWatcher/eventHandler()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at mx.core::UIComponent/dispatchEvent()
     at UWLApplication/set opentask_updated()
     at MethodInfo-4234()
     at Function/http://adobe.com/AS3/2006/builtin::call()
     at sap.core.wd.context::WDContextListener/execute()
     at sap.core.wd.context::WDContext/notifyListeners()
     at sap.core.wd.context::WDContext/_set()
     at sap.core.wd.context::WDContext/set()
     at sap.wd.island::WDIsland/storeProperty()
     at sap.wd.island::WDIsland/onUpdateProperty()
     at mx.binding.utils::ChangeWatcher/wrapHandler()
     at flash.events::EventDispatcher/dispatchEventFunction()
     at flash.events::EventDispatcher/dispatchEvent()
     at mx.core::UIComponent/dispatchEvent()
     at UWLApplication/set opentask_updated()
     at MethodInfo-4234()
This is especially strange, cause before I had a refresh button in which I updated my entire item collection. Now, I have added this field and suddenly I get this error !
Does anybody has any idea what this could mean? Any help would be much appreciated ...
My field in Flex:
\[Bindable\]
public var opentask_updated:Number;
<mx:Text id="opentask_updated_text" text="{opentask_updated.toString()}" />
My adaptions in WDJ:
public void getInbox( ) {
       wdContext.currentInboxElement().setOpentask_updated(0);
public void wdDoInit() {
       getInbox();

Solved!
It appeared to be a "long" parameter and I was trying to put it in a "Number" parameter in Flex (because there is no long in Flex)
When I changed both to String, it worked!

UC 220 M3 with Flexi Flash

Similar Messages

Maybe you are looking for