UC 520 Software

Good Day,
Hope someone can assist me?
I have a UC 520 running software release: uc500-advipservicesk9-mz.151-2.T2, I would like to register a Cisco 3905 IP phone to the UC520 but I understand I need CME 8.8 for this to work. I have searched the whole Cisco website for updated software on the UC520 but the newest I can get from Cisco Webiste is: " Release 12.4.22-YB8 ". Does someone know where I can locate newer software for the UC520?
thank you,
Hannes

39xx phones are not compatible with the UC520 as of right now. It might be in the works but as of the latest software pack, it is not available.
CME 8.8 is not available for the UC520. The latest software pack information is available in this post:
https://supportforums.cisco.com/docs/DOC-9827
Which shows:
Note: Timelines & Releases are tentative and are subjected to change
Software
Pack
Release
Timeframe
IOS
CME
CUE
Compatible
CCA
8.6.X
2012-JUN
15.1(4)M4
8.6
8.6.3
3.2.1
8.2.0
2011-JUL
15.1(2)T4
8.1
8.0.6
3.1
8.1.0
2010-DEC
15.1(2)T2
8.1
8.0.3
3.0
8.0.5
2010-NOV
15.0(1)XA3a
8.0
8.0.3
2.2.6
8.0.4
2010-AUG
15.0(1)XA3a
8.0
8.0.2
2.2.5
8.0.3
BETA1
15.0(1)XA3a
8.0
8.0.2
2.2.5 (Beta)
8.0.2
2010-MAR
15.0(1)XA2
8.0
7.1.3
2.2.2
8.0.1
2010-FEB
15.0(1)XA1a
8.0
7.1.3
2.2.2
8.0.0
2009-NOV
15.0(1)XA
8.0
7.1.3
2.2
7.0.4
2009-OCT
12.4(20)T4
7.0
7.0.3
2.1.1
7.1.3
2009-SEP
12.4(24)SB
7.1
7.0.3
2.1

Similar Messages

Nokia 520 Software Update Issue

Hi all
My nokia has been on the software update screen with the cogs for over two hours now. Its making the phone quite hot, so i took the battery out to cool it down for a few minutes. Put the battery back in and it returned back to the updates screen with the cogs...
How can i fix?

Are you able to reset your phone this way?
Did you get that error message while using that big button in the Software Recovery Tool (‘my phone does not start up or respond’)?

Router 520 series, rounting inter-vlan

Hello,
Till now I work only with router 1800 and 2800.
I would like to know if some of you have some experience in configuring a router 520. What I want to know if with this router can I realize this scenario:
- 3 Vlan: vlan1, vlan2, vlan3.
- 3 Lan: 10.x.1.0/24, 10.x.2.0/24, 10.x.3.0/24(each lan correspond a vlan)
And I have to management some access and security issue using acl, for example, vlan1 cannnot access to internet, and only vlan2 can access to vlan1.
I know how to realize this, but reading data-sheet and user guide of cisco 520, I am not sure 100%, if can do what I neet.
Thank you really much.

VLANs in Cisco 520 Router Series:
http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg_dhcp_vlan.html#wp1019824

How to set up site CORRECTLY for HTTPS?

hi,
I have a site up and running in Developement and Test servers using HTTP. I also got it up and running with HTTPS. However this doesnt seem to work all the time. Sometimes the portal seems to creaete the URL without the HTTPS causing it to go to the Home page.
Is there any configuration files or articles that describe all the steps that need to be done to get the portal ready for HTTPS?
One are I have a probloem is the Visitor Tools when I apply theme, it redirects to HTTP instead of HTTPS and this causes the Customize Portal to disappear and the Home page to be displayed.
THANKS in advance.
charlene

Maybe this can help?
http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg_vpn_gre.html

Unable to default the SR520

I cant get the router to work at all. I want to default it. CCA wont let me default the configuration for this router for some reason. The check box under reset config is missing.
I backup up the configs using tftp and then copied the V9 factory config to the router.
I did a copy flash start then the new config then wr mem
when I reload the router does an auto-save and copies the running over the startup
So I did the process again and then did a copy start run and got all kinds of errors.
what exactly is the correct method to default the router

Hi,
sounds like your in a hole right now... not good.
Take a look at this document:
http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg_rommon.html#wp1019618
If you do a write erase, then save the start-up config to a new file on the flash:, or export the startup config to a tftp server (might be the best way to go). Then reload and start in ROM monitor, and change the startup config from the file you just created, then you might have a running config.
CAREFUL: Know your limitations before doing this.. this is not the easiest configuration if you are not familiar with CLI. TAC is the recommended way to go.
Regards
Eivind

Sa520 ---s2s---- rv110

Hi folks, I am trying to create a VPN, I hava a sa520 and rv110, I can´t reach any network neither from sa520 to rv110, nor vice versa, it is posible to create this vpn among these devices? Thanks

hi luis,
its possible to create a site-to-site vpn among these devices. as both support site-to-site ipsec according to their data sheet.
below are their config guides. you can go through ipsec section.
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg_ez_vpn.html

IMac 12,1 Lion hangs on shutdown

We have recently brought a number of iMacs (12,1) and i have created a lion (10.7.5) image, but we are having a problem where they keep hanging on shutdown, everything appears to shut down but the mac doesn't power off it just sits on a white screen.

Thank you for your response, i haven't been able to replicate the fault again on the mid 2011 iMacs but i have had the problem on a number of mid 2007 iMacs. Please find attached log.
23/10/2012 08:02:03.152 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:03:18.000 kernel: smb_iod_reconnect: Reconnected share SHARED with server taz
23/10/2012 08:03:18.000 kernel: smb_iod_reconnect: Reconnected share IT-TECHNICIANS with server taz
23/10/2012 08:07:06.412 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:12:09.677 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:14:50.726 sandboxd: ([101]) applepushservice(101) deny network-outbound 172.30.1.22:8080
23/10/2012 08:14:50.727 applepushserviced: Got connection error Error Domain=kCFErrorDomainCFNetwork Code=310 "There was a problem communicating with the secure web proxy server (HTTPS)." UserInfo=0x7fca4be72110 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSLocalizedRecoverySuggestion=To change your proxy settings, open Network preferences, click Advanced, and then click Proxies. For help with this problem, contact your system administrator., NSLocalizedDescription=There was a problem communicating with the secure web proxy server (HTTPS).}
23/10/2012 08:14:50.727 applepushserviced: Failed to get client cert on attempt 71, will retry in 900 seconds
23/10/2012 08:17:12.984 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:22:16.091 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:27:19.417 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:29:51.876 sandboxd: ([101]) applepushservice(101) deny network-outbound 172.30.1.22:8080
23/10/2012 08:29:51.877 applepushserviced: Got connection error Error Domain=kCFErrorDomainCFNetwork Code=310 "There was a problem communicating with the secure web proxy server (HTTPS)." UserInfo=0x7fca4be3e4d0 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSLocalizedRecoverySuggestion=To change your proxy settings, open Network preferences, click Advanced, and then click Proxies. For help with this problem, contact your system administrator., NSLocalizedDescription=There was a problem communicating with the secure web proxy server (HTTPS).}
23/10/2012 08:29:51.877 applepushserviced: Failed to get client cert on attempt 72, will retry in 900 seconds
23/10/2012 08:31:18.000 kernel: smb_iod_reconnect: Reconnected share SHARED with server taz
23/10/2012 08:31:18.000 kernel: smb_iod_reconnect: Reconnected share IT-TECHNICIANS with server taz
23/10/2012 08:32:22.529 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:37:25.653 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:38:39.555 ARDAgent: Did not find entry for client 00:25:00:ef:86:43
23/10/2012 08:39:04.067 Remote Desktop: SendMessageToAgentWithReply: gCmdReplyPtr->cmdResult contained error code -6405
23/10/2012 08:40:06.535 com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [3301] for authorization created by '/System/Library/CoreServices/Software Update.app' [3296]
23/10/2012 08:40:06.535 com.apple.SecurityServer: Failed to authorize right 'system.install.software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/in stalld' [3301] for authorization created by '/System/Library/CoreServices/Software Update.app' [3296]
23/10/2012 08:40:11.319 diskmanagementd: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x10ae08c20=disk0s3=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
23/10/2012 08:40:11.459 diskmanagementd: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
23/10/2012 08:40:11.459 diskmanagementd: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=-69737 outInfoDict=(null)
23/10/2012 08:40:11.520 Software Update: recoverySystemVersion: could not get recovery version information for mount point /: Unable to find boot helper partition. (-69737)
23/10/2012 08:40:11.520 Software Update: Package Authoring: error running volume-check script: TypeError: 'null' is not an object (evaluating 'my.target.recoverySystemVersion.ProductBuildVersion') at x-distribution:///installer-gui-script%5B1%5D/volume-check%5B1%5D/@script
23/10/2012 08:41:32.405 Software Update: Layout still needs update after calling -[WebHTMLView layout]. WebHTMLView or one of its superclasses may have overridden -layout without calling super. Or, something may have dirtied layout in the middle of updating it. Both are programming errors in Cocoa Autolayout. The former is pretty likely to arise if some pre-Cocoa Autolayout class had a method called layout, but it should be fixed.
23/10/2012 08:42:28.923 authexec: executing /Library/Frameworks/VirusScanPreferences.framework/Versions/Current/Resources/p refsHelperTool
23/10/2012 08:44:53.064 sandboxd: ([101]) applepushservice(101) deny network-outbound 172.30.1.22:8080
23/10/2012 08:44:53.065 applepushserviced: Got connection error Error Domain=kCFErrorDomainCFNetwork Code=310 "There was a problem communicating with the secure web proxy server (HTTPS)." UserInfo=0x10981b140 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSLocalizedRecoverySuggestion=To change your proxy settings, open Network preferences, click Advanced, and then click Proxies. For help with this problem, contact your system administrator., NSLocalizedDescription=There was a problem communicating with the secure web proxy server (HTTPS).}
23/10/2012 08:44:53.065 applepushserviced: Failed to get client cert on attempt 73, will retry in 900 seconds
23/10/2012 08:46:55.631 ARDAgent: SendPacketToTask error Broken pipe
23/10/2012 08:46:55.631 ARDAgent: Error sending Task Server connection code 2 to admin.
23/10/2012 08:46:59.158 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.159 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.162 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.163 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.165 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.169 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.169 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.171 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.171 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.173 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.180 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.201 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.201 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.202 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.206 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.210 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.214 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.215 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.218 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:46:59.220 Remote Desktop: [Computer initWithDescriptor] CFStringToIPv6Address failed to convert string :: to an IP address.
23/10/2012 08:47:00.477 ARDAgent: MPSignalSemaphore err -29298
23/10/2012 08:47:03.551 ARDAgent: SendPacketToTask error Broken pipe
23/10/2012 08:47:03.552 ARDAgent: Error sending Task Server connection code 2 to admin.
23/10/2012 08:47:12.227 com.apple.launchd.peruser.480586318: ([0x0-0x16016].com.apple.AppleSpell[297]) Exited: Killed: 9
23/10/2012 08:47:12.230 com.apple.launchd.peruser.480586318: (com.apple.mdworker.pool.0[3294]) Exited: Terminated: 15
23/10/2012 08:47:12.276 com.apple.launchd.peruser.480586318: (com.apple.talagent[225]) Exited: Killed: 9
23/10/2012 08:47:12.947 McAfee Reporter: Application is teminating
23/10/2012 08:47:13.571 loginwindow: DEAD_PROCESS: 40 console
23/10/2012 08:47:13.579 mcxalr_agent: Disconnect request received. Reason: unmanage
23/10/2012 08:47:14.000 kernel: mcxalr{4} Management DISABLED for uid: 480586318
23/10/2012 08:47:14.000 kernel: AFP_VFS afpfs_unmount: /Volumes/MAC Techsupp, flags 0, pid 4235
23/10/2012 08:47:14.000 kernel: AFP_VFS afpfs_unmount: /Volumes/Machine Backups, flags 0, pid 4240
23/10/2012 08:47:14.000 kernel: IOHDIXHDDriveOutKernel::doEjectMedia semaphore_wait_deadline() returned 14
23/10/2012 08:47:14.000 kernel: AFP_VFS afpfs_unmount: /Library/Screen Savers, flags 0, pid 4233
23/10/2012 08:47:14.000 kernel: AFP_VFS afpfs_unmount: /Library/Burton College Desktop, flags 0, pid 4236
23/10/2012 08:47:14.672 shutdown: reboot by ********:
23/10/2012 08:47:14.677 shutdown: SHUTDOWN_TIME: 1350978434 672462
23/10/2012 08:52:07.000 bootlog: BOOT_TIME 1350978727 0

SR520 CLI Reference Manual

Where can I get a complete and accurate version of the CLI Reference Manual for my SR520? I would like it to be in PDF form since I will need it most when my network is down and I am trying to repair my network.

Luke,
While the SR520-T1 does not support the CLI, the other models do support the CLI, but Enterprise provides this support with a contract. The admin guide can be found here: http://www.cisco.com/en/US/docs/routers/access/500/520/software/configuration/guide/520scg.pdf
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

I have a touchsmart 520 pc and installed windows 8 but it says the hp software is not compatible

I am running windows 8 on an HP TouchSmart 520 but it says the HP Software is not conpatible with windows 8 is it possible to get a compatible version

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP makes hundreds of TouchSmart models that are all different. Without this information it may be difficult or impossible to assist you in resolving your issue.
THIS is HP's position on Windows 8 support and any HP computer not supplied with Windows 8;
Not all Windows 8 features may be available on all PCs.
Your particular experience with Windows 8 will be determined by the capabilities of your PC.
HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
and
Important information regarding additional limitations and requirements;
Screen Resolution Requirements
Limitations with DVD playback software
Limitations with Blu-ray playback software
Limitations with TV Tuner software
Secure Boot & other UEFI dependent features
Secure Boot & other UEFI dependent features
Limitations with touch screen capabilities
Windows 7 PCs with touch screens will not have full Windows 8 touch capabilities after upgrade.
HP PCs with touch input hardware designed for Windows 7 will provide a comparable experience for only two touch point applications after the upgrade to Windows 8. HP Windows PCs with touch input hardware will not support Windows 8 applications that require more than two simultaneous touch points.
Additionally, Windows 8 edge swipes may not be available due to the recessed bezel on HP touch systems shipped with Windows 7.
HP TouchSmart Magic Canvas and HP TouchSmart applications are not compatible with Windows 8 and must be uninstalled before upgrading. Note that content created using the TouchSmart applications such as Graphitti will not be available after upgrading.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Software with the new ELPH 520 HS called Imagebrowser & Zoombrowser - both do not work.

Just bought new ELPH 520 HS at COSCO. Liking the camera. Just installed the software off the CD onto a laptop/Win7. No apparent problems. But neither program will execute. Each one seems to startup and get busy and then a message appears in the middle of the screen about how there is a problem. then nothing. I have retried it many times. No success. Whatever happened to Plug & Play. TIA for your help in this regard.

Hi Canon1008,
For assistance with the software, please contact us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Software updates for Windows 520

I'm having trouble updating the new update for my Nokia 520? I keep receiving the error code 80188308. Can anyone help me?
Solved!
Go to Solution.

Is your phone currently running SW downloaded from the Developer Preview Program by any chance?
see this: http://answers.microsoft.com/en-us/winphone/forum/wpdp-wpupdate/0x80188308-error-on-81-dp-update-1-i...
http://www.microsoft.com/en/mobile/nokia-x-updates/
http://www.microsoft.com/en/mobile/nokia-x2-update/
http://www.microsoft.com/en/mobile/asha-software-update/
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
https://twitter.com/LumiaSWUpdates

Lumia 520 black software

I have updated my nokia lumia 520 to amber software update. Now i want to update for black software update. But i have not received any update notification for this update and when i searched manually, then also no update was found. What to do now....?

Hope you are checking as per what you see under settings-->about-->carrier... and
settings-->extras+info-->more info-->Manufacturer Name / Mobile Operator .. and not where you are residing / using the phone.
...and by changing 'Region' under 'settings' these will not change.
BTW, Even if its satisfying these conditions, you need to wait since the roll-out is in phases.
If you are in a hurry, try your luck with Nokia Care whether they can update the phone !!

No software for Canon PowerShot ELPH 520 HS is available! eek. what to do?

existing software ("Camera Window") opens but has no function.
Canon website does not have any updated software; and seemingly I cannot download images from my camera
I love this camera and want it to work with my computer. :-)

Contact Canon and ask when the update for Mac OS X 10.9 will be available.
In the meantime, you should be able to connect the camera via its USB cable to upload images into iPhoto.
Alternatively, a SD card adapter should allow you to upload directly from your camera's microSD card.
Message was edited by: EZ Jim
Mac OSX 10.9

Lumia 520: Can't connect to 3G after software upda...

unable to select 3g network in my lumia 520 after updating phone (docomo network)
Moderator's note: We have amended the title of this post as this was moved from another thread.

Hi facing,
Welcome to the forum.
What connection did you use when you updated your phone? Is it cellular data connection or Wi-Fi? Have you tried contacting your operator about this? Try to remove and reinsert your SIM and then reboot your phone. You can also try to update your phone's settings by scanning the QR codes on this link: t5/Pool-of-Knowledge/Nokia-Windows-Phone-8-App-Updates/td-p/1640082. For the steps on how to scan QR codes, see this: http://www.windowsphone.com/en-US/how-to/wp8/web/scan-codes-tags-and-text.
Let us know the outcome.

Lumia 520 uninstall software update

After update a network+, my phone usually lose signal(no network). Is it imposible to uninstall it?

Once you install an update, you cannot uninstall it. I suggest you to take out your sim card, clean it with a soft cloth and put it back in. Also check if there's any other system app updates using the Lumia System Updater or SysApp Pusher and update if there's any.
And do not forget to restart your phone after any update, the updates should work without a phone restart, but sometimes restarting really helps. You may restart (soft reset) your phone by pressing volume down and power keys for 10-15 seconds, until the phone vibrates. Or you may remove the battery.
If these suggestions doesn't solve the problem, you may try a Phone Reset (hard reset). Do not forget to backup your data before reset and please read Restore a backup to my phone topic before doing a hard reset.
The silence will fall

UC 520 Software

Similar Messages

Maybe you are looking for