UC or NUC - PI 7.1 for Integration SAP-FSCM

hello friends,
i have installed a pi 7.1 UC and i would connect a SAP-FSCM based on ECC6.0 NUC. Is this possible?
Thanks,
Christoph

Yes, it is possible to proceed with such a design. You shouldn't face any difficulty as such
Regards,
Prateek

Similar Messages

Best Approach for integrating SAP CRM with Outage Management System

Hi All,
We are moving towards deploying Outage Management System (Oracle Utilities NMS) to help localize the fault, achieve Outage Management and a transparent network with a near-real time stats. We already have SAP ECC 6.0, ISU, SAP PI 7.0 and SAP CRM 7.0. One of the challenges we are facing is to decide how should we go about the integration of SAP CRM with Oracle's Outage Management System.
Here is a sample business scenario,
CSR receives a call from a consumer and inquires about planned outages for a particular area.
This information is contained in the Outage Management System (OMS). OMS is SOA based and is hosted on Oracle Service Bus.
I want to know that is there any ES Bundles available for CRM-OMS integration? Should we go about Service Based Integration? What are the alternatives to Service based integration? Can it be done using BAPIs?
We receive around 1000 consumer complains and against every complain a ticket is generated in CRM. Now If CRM is integrated with OMS using SAP PI, the volume of the data being exchanged via PI is very much high and exceeds our licensed volume for SAP PI. So I do need to know the best practices for either approach that you may recommend.
Regards,
Adil Khalil

does anyone have an idea about this one, I've asked this question in a few places and no one really seems clear about it.
Also, I've read here and there that SAP Business One is not a real SAP product. It was bought by SAP and is sold by them but has little do to with SAP's technology (R/3, SAP ERP, Netweaver, SAP CRM, ...), and that therefore they don't support it that much ? Is any of this right ?
I'm just trying to get my vision of the SAP universe clear.
Angela

Integrating SAP-ERP system to SAP-SCM system via SAP-XI

Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ram

Hi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy

Error:Unable to reserve .lok file for Integrated WLS server (DefaultServer)

Hi,
I am having jdev 11.1.1.1.0.
Many times I get following error while running my application pages:
Unable to reserve the .lok file for Integrated WLS server (DefaultServer). Typically this is because another instance of this server is already running in the WLS domain.
The only way out is to close jdev, delete system11.1.1.1.33.54.07 folder and open jdev again.
Why is this error dialog shown? Is there any permanent solution?
TIA

Thanks for quick reply!
As suggested in the given thread, I logged into the weblogic console http://127.0.0.1:7101/console/ as 'weblogic' user.
On the left hand side in the 'View changes and restarts' section, no pending changes are shown. It shows following text:
Configuration editing is enabled. Future changes will automatically be activated as you modify, add or delete items in this domain.
Please advise. I can share the application.zip if needed.
Thanks

What technical components are needed for integration of SAP BI and BO?

Hello,
What technical components are needed for integration of SAP BI and BO?

Hi,
you need to setup a BOBJ server (eg. BusinessObjects Enterprise XI 3.1 or BO Edge 3.1) and then install the BusinessObjects integration Kit for SAP on the same machine your BOBJ server runs.
In order to build reports you can either use Crystal Reports (eg Install Crystal Report Designer 2008 V1 if you have an XI 3.1 server installed), WebIntelligence (Install the Business Objects XI 3.1 Client Tools in order to be able to build universes), BusinessObjects Voyager or XCelsius. Please note that you have to always install the BOBJ integration Kit for SAP (should be the same version as your server and client installation) on your clients AFTER you installed one or more of the above client tools.
Please take again a look at the following link for more detailed information (from Ingo) on this:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f]
Regards,
Stratos

What are the Infotypes required for integrating Payroll for Latin America?

Hi,
Can anyone tell me the Country Specific Infotypes for Implementing Payroll for Latin America? Also Please let me know the Infotypes required for integrating FI & CO modules with Payroll.

Hi,
Can anyone tell me the Country Specific Infotypes for Implementing Payroll for Latin America? Also Please let me know the Infotypes required for integrating FI & CO modules with Payroll. Also I need to implement the Payroll for Latin America including ESS and MSS. How do I Integrate?
Regards,
Kavitha

"Posting with reference to pur. order only possible for integrated whse"

When I try posting GR with mvmt type 101 wrt PO I am receiving the error “Posting with reference to pur. order only possible for integrated whse”
The scenario is storage lcation is maintained with the external warehouse management .
Is there anything i need to maintain warehouse as decentralised one or should i need to maintain any moment types or is there anything else i should maintain in the customisation.
Kindly guide me regarding this as I am new to WM ,Thanks in advance.

Hi ,
In my case i have not maintained as decentralised one.
also the thing is there is no warehouse house data managed over here .the requirement is when connected to extended warehouse the system has to create inspection lot after the GR has done ,
whereas in normal scenario everything is normal,
can you please suggest what should be done in this case.
Also if possible can you please tell me what from the scratch so that it will be helpful to come through .

Step by Step procedure for Integration of B0 with BI 7.0, Portal

Hi,
My key concerns include integration with SAP Portal, which I did not find in instalaltion guide.
Please advice on step by by Procedure for BO with BI 7.0 starting with the right version of BO to be installed.
1. Which version compatible with BI 7.0 SP 12, LATER TO BE UPGRADED TO sp 16
2. Source of data will be BI and reports will be using BO.
3. What are components to be installed
4. Prerequisites for Integration with BI AND SAP Portal.
5.Steps for Integration with BI 7.0
6. Steps for Integration with SAP Portal- Where to get the sample iviews. What to do for connction between Portal and BO - this i didnt find in installation guide
Thanks,
Harish

HI,
here the items:
SAP Side:
- all machines have to be in the same domain
- BI has to trust the portal
- BI has to accept SSO tickets
- EP has to generate SSO tickets
BusinessObjects:
- SAP Authentication has to be configured
- BI system should be configured has default system in the options of the SAP authentication
- authentication.default parameter in the web.xml for InfoView has to be set to secSAPR3
- BusinessObjects has to be in the same domain
EP side:
- in the system landscape configure the Crystal Enterprise Server Properties for your BI system
- import the portal iview template that is part of the SAP Integration Kit
- create a new iView
Ingo

I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The wid

Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
Loïc

Accordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit

Best practice for integrating oracle atg with external web service

Hi All
What is the best practice for integrating oracle atg with external web service? Is it using integration repository or calling the web service directly from the java class using a WS client?
With Thanks & Regards
Abhishek

Using Integration Repository might cause performance overhead based on the operation you are doing, I have never used Integration Repository for 3rd Party integration therefore I am not able to make any comment on this.
Calling directly as a Java Client is an easy approach and you can use ATG component framework to support that by making the endpoint, security credentials etc as configurable properties.
Cheers
R
Edited by: Rajeev_R on Apr 29, 2013 3:49 AM

Error logging for Integrated Planning

Can I turn on error logging for Integrated Planning. Users get errors and forget to screenshot it to me, so I have no way of finding out what their error was unless I get them to duplicate it. It would be nice to look up a log of errors by user. Do they have something like that in Integrated Planning?
Thanks!

Hi Dustin,
Few comments :
1. UPDATE TASK means that a new background task is create and the function is performed asyncronisly ,with that the user will not wait for the update of the DB to finish ,you can read in SAP help about CALL FUNCTION IN UPDATE
2. Be aware that the table that you create will be extremely large in no time ,you will have to delete data on a regular basis
3. The same concept of the thread can be applied to function module 'RRMS_MESSAGE_HANDLING' this function module is responsible of messaging in BEX 'some times IP related messages are invoked from it.
Regards,
Eitan.

No destination for Integration Server found - XI 2.0

Hello,
I have developed a few java proxies and have had good luck using the jpf.properties file. Now, as we would like to set up more of a production scenario we are in need of moving over to the dbconnect.properties and technicalID.properties. The problem is when switching over to these files I received the "No destination for Integration Server found" error. So first off I would like to make sure we have the files configured correctly.
dbconnect.properties
hostname=xipsys
systemNumber=03
user=xiusr
password=xipswd
client=300
language=EN
... the dbconnect.properties file is correct I believe.
technicalID.properties
SAPTechnicalSystemIdentification=TS_MyTechnicalSystemName.SystemHome.MyPCName
... the TS_MyTechnicalSystemName is the technical system that I created in the SLD. MyPCName is my computer name as this is where I'm running the java proxies from.
First off, does it look like my files are configured properly?
Second, in the SLD I've configured my technical system and also a business system with similar names and specified the host as MyPCName. Is this correct?
I've also noticed that when I remove the files completely from my system I get the exact same error message however they are in the right location and have the correct names. Is there anyway to get a better error message out of the system? I know the files are in the right location cause if I use the jpf.properties in that location it works.
thx
XI 2.0

Well it's getting a lot closer. I'm getting a different error now and its showing up in tx SXMB_MONI. The error I get is...
ROUTING.NO_SENDER:Unable to find a sender
In the monitor it shows that there was a message pushed but it's red flagged and there is no sender/receiver information. Is there anything else I need to add to the java proxies?
The following is my latest configuration ....
dbconnect.properties looks like
hostname=myXIServer
systemNumber=03
user=XILDUSER
password=password
client=300
language=EN
technicalID.properties
SAPTechnicalSystemIdentification=TS_myTechSys.SystemHome.BS_myBizSys
In the SLD I have TS_myTechSys defined as a "SAP Standalone Java System" on myComputer.mydomain.com.
Also in the SLD, I have defined BS_myBizSys as a "Java System" and belongs to the TS_myTechSys Technical System.
In the exChange Profile under ApplicationSystem I have the following defined
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
com.sap.aii.proxy.framework.connection.timeoutInMSec
com.sap.aii.proxy.framework.destination
com.sap.aii.proxy.framework.destination.client
In addition I also get the following error sometimes...
JPF loadProfileProperties() - Could not access Exchange Profile: java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer '
com.sap.mw.jco.rfc.MiddlewareRFC'
no sapjcorfc in java.library.path
I have this file as a dll in the same directory as all the jar's.
in addition XILDUSER is part of the following group
SAP_BC_AI_LANDSCAPE_DB_RFC
Should that user have more permission?
Any ideas?
XI 2.0
One more note, I am running my WebApp from an instance of Tomcat 4.1. This is where the Java Proxies are running and it works fine using the jpf.properties. Some of the documentation I've recently found has said that it needs to be running on a SAP J2EE engine which we will not be able to do in the end.
Message was edited by: Larry Chaput
Message was edited by: Larry Chaput

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

Which Objects should I target for integrating Eloqua REST API 2.0?

Which Objects should I target for integration? and What are the possible use cases for the additional objects other than core objects?

I am still trying to find a good REST API 2,0 document like the Bulk 2.0 document. Book List: Oracle Marketing Cloud
I did find this but is also not in depth:
REST API - Documentation for Core Objects

Why is Itunes being charged to my phone for integration?

why is Itunes being charged to my phone for integration?

No idea what this question means.
What are you asking?

UC or NUC - PI 7.1 for Integration SAP-FSCM

Similar Messages

Maybe you are looking for