UC320w call forwarding not working with SPA504?

I'm installing UC320W for customer and cfwd
all is not working? its just hang doesnot go anywhere
if anyone can help?
As well eventhough cfwd off, when call from outside and dial that extension now it says it has been forwarded!!
any one know or facing this? pl. help

Similar Messages

Re: Call forwarding not working with subscription

I just noticed the same problem today too. Calls are going to voicemail instead of ringing to my forwarded phone (I have a US/CA unlimited subscription)
and I do use Skype on both Win7 computer and Android phone.
note that the help on the feature clearly still states that it should work even if you're offline (my red bolding below, from http://www.skype.com/en/features/call-forwarding/?intsrc=client-_-windows-_-6.11-_-go-callforwarding...
How it works:
Somebody calls you on Skype, but you’re unable to answer or you’re offline.
The call gets forwarded to a mobile or landline of your choice.
You pick up and there’s no extra charge for the person calling.

I just noticed the same problem today too. Calls are going to voicemail instead of ringing to my forwarded phone (I have a US/CA unlimited subscription)
and I do use Skype on both Win7 computer and Android phone.
note that the help on the feature clearly still states that it should work even if you're offline (my red bolding below, from http://www.skype.com/en/features/call-forwarding/?intsrc=client-_-windows-_-6.11-_-go-callforwarding...
How it works:
Somebody calls you on Skype, but you’re unable to answer or you’re offline.
The call gets forwarded to a mobile or landline of your choice.
You pick up and there’s no extra charge for the person calling.

Hairpin forwarding not working with CCME 4 and SIP

We are a VoIP provider and we're trying to install Cisco Unified CME 4.0 for a customer. IOS is 12.4(4)XC1 on a 2811. The customer will use our SIP service as his only outgoing trunk (no on-board ISDN or FXS cards).
On our SIP service we don't support call transfer or forwarding using the "302 Temporarily Moved" SIP method, for billing reasons. The customer needs to to hairpin routing and actually have the call go entirely through his equipment.
Following instructions, we tried enabling hairpin routing by issuing the following commands:
voice service voip
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
dial-peer voice 9000 voip
no supplementary-service h450.2
no supplementary-service h450.3
supplementary-service h450.12
Despite all this, when an ephone-dn has call forwarding enabled to an external SIP number, and a call comes in through the SIP trunk, our SIP server gets a "302 moved temporarily" message. It rejects this message and the call fails.
We even tried loopback-dn routing but we still get the same result.
Is there a way to force CCME to route the call through its inside even if it's coming and going from/to the same SIP trunk?
Thank you
-Manuel

Just an update: Davey's post was very helpful as it solved our "call forwarding not working" problem. The solution was to add the "service session" command to my voip dial peers. CME now hairpins forwarded calls correctly.
What still doesn't work at all is call transfer. If I receive an external SIP call and want to transfer it to another external SIP number, I just get the "unable to transfer call" error message on the phone, and both calls are just placed on hold. So it's not a permission problem - the call can be dialled correctly. But when hitting "transfer" the second time, CME doesn't "know" how to join them together (ie. hairpinning).
Cisco TAC's replies so far have been quite strange. I've been told that CME does not support hairpinning and that this is still being developed - apparently not, because call forwarding *does* work now. I'm only missing call transfer, then I'm all set :-)
Thank you
-Manuel

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

Servlet forward not working with portal and oc4j

Scenario: page1.jsp, page2.jsp, MyServlet
Page1.jsp posts a form to MyServlet which then does some processing and forwards to page2.jsp.
Tests:
Works fine as a standalone app under oc4j.
Does not work as oc4j-driven portlet under latest portal. Specifically, it conks out on the forward.
Question:
Why?
What is the suggested workaround?
Michael Mogley
Software Engineer
LRN, Inc.

James, thanks for responding but you are misunderstanding the problem. I have been able to do multipage and form-submit portlets as you describe for a long time. The issue is I am not able to use the jsp-forward directive within a validation servlet when using oc4j with portal. Here is what I'm trying to do in pseudocode:
EntryPoint.jsp
1. Enter form data.
2. Submit form to MyServlet.
MyServlet
1. Validate form.
2. If valid, <jsp-forward page="success.jsp"/>.
3. Else, <jsp-forward page="failure.jsp"/>.
The above works fine when used in an app running on oc4j outside of portal. It does not work when the same oc4j app is portletized. By the way, the portletized app WILL work if I change jsp-forward to jsp-include. So the problem is obviously in the forwarding.
Michael
I would try looking at the samples in the PDK-Java V2 that show how to do form input and multipage behavior. The form input shows you how to make a form in a portlet that when you submit it, the entered values appear in the portlet. The multipage portlet shows you how to have a portlet display one page and then when you click on a link, it shows you the second page.
It may make sense to copy the same code used for the samples and just tweak it to create a form that passes values from page1 to page2.
For more info on V2 parameters, see the article "A Primer on Parameters and Events" in the PDK-Previews (for subscribers to Developer Services only). You can also see the V1 article called "Understanding the Parameter Passing Portlet" for more info on parameter passing with portlets in V1.
James
James

Digital Voice Landline DND or Call Forward not working as scheduled

I have seen this happen for quite some time. In order to avoid calls disturbing sleep at night I have tried scheduling call forward or do not disturb options with time period of 8pm to 11:45pm. But instead of line coming back to normal status outside this time window, my phone seems to keep honoring the DND or forward as setup for night time. Many callers have complained about not being able to get through or being surprised to see the forwarded number answering the call instead of the home line. The only working solution seems to be is to disable time based schedules and just use call block with specific spam numbers in it preloaded. That works 24x7. I am unable to block landline from ringing at night selectively or otherwise based on time window.
Is this a bug or a known issue ? I tried setting up via different browsers IE Firefox etc and the result is the same.

My question is if calls could be forwarded from skype number to a mobile number ? Does anyone know the answer to that..?
Also if forwarding from skype number to mobile number is possible to a mobile number in A) Same country as of the Skype number, B) Mobile number in a different country overseas..?
Thanks

Why the call is not working with android?

dear community,
I have been trying to make a phone call with someone who lives overseas but it keep saying call faild ! and we even tried to send text it doesnt deliver it at all.
but when i called my friend who is in same city it worked well
so what is the problem?
why its not working when we want to make a call with someone abroad?
I need a solution as soon as possible please
we both tried to update,delete, re-install the app its just never work T^T
Solved!
Go to Solution.

When trying to call somebody abroad make sure you have chosen the correct country or reigien code upon opening the dial pad within skype we have the same phone's appart from mine is a s3 so this process will be exactly how I say as I was saying when. The skype dial pad is open just where the numbers display at the top of the screen right below you will see white writing chat the area code to the country you are trying to call.
I hope this help any more problems or if this persists cone back and I'll see if I can help some more if not then perhaps try customer services on the live chat link via the website
Adam.k

My handoff phone call does not work with Yosemite while other apps are working

I have upgraded to Yosemite and tried the handoff with my iPhone 6. First time I tested phone call which worked. I switched off the Mac and went out. When I came back the handoff phone call didn't work anymore, while Safari, Email, etc. are still working via handoff.
Thanks for any help in advance

The iPhone calling feature is not called, "Handoff." Using the terminology incorrectly only adds to the problem. "Handoff," is the feature where apps share documents.
Both "Phone" and "Handoff" are separate features under "Continuity."
This is "Handoff":
This is "Phone" calling:
Continuity features (Scroll up and down to see all): http://www.apple.com/osx/continuity/

Lync 2010/2013 simultaneous ring\call forwarding not working

Hello ,
I have Lync server 2010 and 2013 environment .I'm facing some issues with simultaneous ring\call forwarding when the call initiator is from outside of my organization.
For lync server 2013 ,i tick the option "Enable forward call history ".
For Lync server 2010 , i enabled the ReferredBySupported.
but when i checked the log, "history-info " still missing
Lync servers are updated with latest CU. the Gateway is SBC 2000 with sip trunk.
please advise

Please check if the correct voice policy and pstn usages are assigned to users. you can test if everything is in order using voice test case.
On client collect the tracing logs and see which voice policy user is getting what message the user get when call forwarding / simultanous ring is being tried

HT202360 Why does email forwarding not work with external addresses?

I have tried to setup an internal email account which is meant to forward emails to an external account.
Under the account's mail options i have set "Mail should be: " to Forwarded and typed in the email address underneath. However, both with an external domain and the me.com domain it does not send the email. If i send an email directly from the accounts using my IMAP account the server has no problems sending the emails to the addresses.
The results of running sudo serveradmin command mail:command = getAutoForward is:
mail:<<id1>>:fwdAddress = "[email protected]"
mail:<<id2>>:fwdAddress = "[email protected]"
mail:<<id3>>:fwdAddress = "[email protected]"
Is there sometime i'm missing?

I have also tried adding a new email account with the [email protected] to see if it was the original account that was the problem, but the new email account doesn't send the emails on either.

Why did my call forwarding stopped working with 8.2 update on my 5s?

I have tried a hard re-boot twice. I forwarded the iPhone to my home when I'm there because my LAN line gets better reception. Now that I need to leave the house I can't un-forward it. I put in the number but it keeps going back to grey and won't work. Help????

In case anyone else experiences this, I found the problem...
Apparently I had some corrupted fonts. I had installed some older Chinese language fonts that complained about errors, which I overrode.
Font Book was unresponsive, but I was able to move all my user fonts out by going to
~/Library/Fonts
I moved them all to a new folder, and the problems went away.
Now I can move them back one by one to identify/eliminate the culprit(s).

HT4623 my voice call services is not working with cellular network...only works fine with wifi..please help?

my voice call services is not working with cellular network...only works fine with wifi..please help?

Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express.

Cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

cannon 8800F not working with OS X yosemite 10.10.1 . I have downloaded the latest drivers and firmware from Canon. I called Canon for support and went through all the checks , but, still my iMac did not see the scanner. Any new ideas?

Have you done any of the following?
http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
Repaired permissions & restarted your comp after the installations of the drivers?
Sometimes, installing the GIMP drivers help with printing issues: http://gimp-print.sourceforge.net/MacOSX.php
What to do when you can't print
=============
not working with OS X yosemite 10.10.1
Per your profile
Mac OS X (10.7.3)
Conflicting info: Please update/correct your profile so that you can receive the correct troubleshooting suggestions. This will assist the users in trying to help you. Thank you.

My ipod touch 4 stops playing and re starts itself while playing one tune from the 2011 Manheim Steamroller Christmas album. It also will not work with Tony Bennett Duets II. It calls each tune a different album giving it a different place in the play l

My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?

My ipod touch 4 stops and restarts itself while playing one tune from the Manheim Steamroller Christmas album. It will not work with Tony Bennett's Duets II. It calls each tune a different album. All other music appears to work fine. Both of the mentioned albums were loaded from CD not from Itunes. Any ideas?

Click to call not working with Firefox 31 in Windo...

Hello All,
I have a problem with Click to Call in my new computer.
Windows 8.1
Skype 6.20.0.104
Click to call 7.3.16540.9015
Firefox 31
Click to Call not working with Firefox.
With IE11 it ok.
When I directly copy the URL "skype:+48xxxxxxxxx?call" into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
Please help me.
Maybe someone have a solution ?
Best Regards
Jarek
ps. Sorry for my english

Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
The Beta update channel receives an update twice a week.
You need to install the current release to switch the update channel to release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

UC320w call forwarding not working with SPA504?

Similar Messages

Maybe you are looking for