UC320W power light just flashing green ?

Hi All,
I have just turned on my UC320W and the power, LAN and WAN lights just keeps flashing green. Does anybody know what could be up with it ?
Thanks
Josh

Hi Joshua,
Is your UC320W able to give you DHCP address? Does it respond to ping?
Try power cycle first, if this does not help, proceed to perform a factory default, then load a saved configuration or site_backup.
If unit still does not respond to any of these, I suggest to quickly call in the Small Business Support Center for further troubleshooting.
Their phone number is: 1-866-606-1866.
The following page contains the pertinent contact list.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Cheers,
Julio

Similar Messages

E3000 was unplugged, now when plugged back in, the power light just flashes....HELP!!!

My wi-fi signal in the house was showing an excellent reading, but it wouldnt connect to the internet on any of our devices. We unplugged everything, and then when everything was put back together, the routers power light just flashes, and wont even show an internet connection to the computer. I had to unplug the ethernet cord from the back off the router and plug it into my computer just to get online....what should I be doing?

The power light on your router is flashing. Try to reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and wait for 1 minute. if the power light on the router is solid then try to reconfigure the router.
If the power light is still blinking then try 30/30/30 reset on the router.

Mac Mini (intel) don't start, power light is flashing green!!! Plz HELP!!!

Hello, yesterday i use my Mac Mini for make some Downloads, and after done i turn he off by quick press power button (i are using Windows XP PRO). Today when i try start he again, get black screen, no sound, no video, just the power led flashing green.
I try hardware reset by unpluging all cables, wait for 15 sec and plug the power cable again (without press POWER ON key), but nothing change.
I try POWER ON with +R +P Alt + Windows Keys, still not work.
I try POWER ON with Shift, Ctrl, D, X and nothing change.
The HDD is fine, because i withdrew and tested in other PC and boot fine.
If anyone has any ideas, please help.
Thanks...

If the power light flashes after power-up, it is very likely to be that the system is failing the power on self test, and the flashing is the way it is reporting the fault to you. If so, the system should also beep.
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
+In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.+

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing a green and amber but very dull. Help please!

My MacBook Pro shut itself down and now it won't turn back on and the power light keeps flashing the amber light. I don't know what to do, and this has never happened before.

Hello Toby135
Reset the SMC or System Management Controller to resolve issues with the power on your MacBook Pro and power adapter.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Regards,
-Norm G.

Mac Mini (intel) don't start, power light is flashing WHITE !!!

First sorry for my last post, i make a misstake in the color of LED, but the color is WHITE and not GREEN.
Hello, yesterday i use my Mac Mini for make some Downloads, and after done i turn he off by quick press power button (i are using Windows XP PRO). Today when i try start he again, get black screen, no sound, no video, just the power led flashing green.
I try hardware reset by unpluging all cables, wait for 15 sec and plug the power cable again (without press POWER ON key), but nothing change.
I try POWER ON with +R +P Alt + Windows Keys, still not work.
I try POWER ON with Shift, Ctrl, D, X and nothing change.
The HDD is fine, because i withdrew and tested in other PC and boot fine.
If anyone has any ideas, please help.
Thanks...

My response to your thread in which you report the power light to be green, but otherwise describe the same condition:
If the power light flashes after power-up, it is very likely to be that the system is failing the power on self test, and the flashing is the way it is reporting the fault to you. If so, the system should also beep.
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
+In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.+
This would suggest that your system has a major hardware fault, though as you can see from the above, 3 of the 5 POST failure reports relate to faulty or missing RAM. If your system is suffering one of these, and if you have opened the system previously, it might be timely to open it up again, remove the RAM and then reseat it or replace it with known-good modules to see if that fixes it.

I reset my apple tv gen 3 now the light just flashes

i reset my apple tv gen 3 now the light just flashes and the remote does not work

Restore
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Service Module / HP Officejet 100 Mobile L411. The Resume and Power lights still flash.

Replaced Service Module on HP Officejet 100 Mobile L411. The Resume and Power lights still flash. Printer still thinks the Service Module is still almost full. Need assistance.

roadman18,
This article should cover the issue you are experiencing. Give the steps outlined under the light patern a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My ipad just flashes green and then switches off. i cant switch it on. its fully charged.help!

My ipad just flashes green and then switches off.its fully charged.help!!!

Dear Barry...thank you for your reply.I am afraid it still doesnt work. Theres a white flash and a shutter sound and it wont stay swited on. I only had it since Jan 2013.

HT200197 i restored my apple tv and the light just flashes rapidly. any ideas?

my apple tv showed a cord unplugged on the screen. Did the restore from ITunes and now the light just flashes rapidly and same logo shows up. Any ideas?

Weaverj,
I experienced the same thing on the SAME day (just last night) except I haven't restored it. Meaning I DID not want to restore the unit and LOSE all the Movies I had on the unit. Interesting that this occurred the same day you had your problem. Instructions state that you should be able to restore without losing the media but there was NO option on iTunes to restore & save!! Just an option to restore back to default losing all your purchased media. I hope you would share any solutions with me if you discover one before I do, and I will do the same. TangoPapa54

I have a power PC that makes abunch of noise when plugged in but the power light just blinks when I press it and shows no graphics wht is wrong

I have a power PC that makes abunch of noise when plugged in but the power light just blinks when I press it and shows no graphics wht is wrong

Click here for information; if the computer beeps three or fewer times, remove and reinsert the computer's RAM. If it beeps four or more times, it needs to be repaired. If it's a G5, it will ignore RAM modules that aren't part of a matching pair.
(76386)

HT1551 My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box

My Apple TV is just showing the apple logo on my screen and light just flash on the Apple TV box

Welcome to the Apple Community.
Which Apple TV do you have.

My Macbook wont Boot, Power Light just lights up

I am having a HUGE Problem with my macbook pro. (Early 2011). I already brought this to the mac center but they could not find anything wrong with it. They said that the whole time it was with them their technicians did not find anything wrong with it.
The problem is that it wont boot up. The last time i was able to use my macbook pro (I am using it right now since it booted up) was 2 weeks ago. Today i tried my luck since i really needed to check my files and luckily it did boot up. but before this it would take an hour for it to boot up. After presing the on button the power light will turn on and after a few minutes a whirring sound will be heard. I will then turn off the Mac and turn it on again and the booting up sound will be heard. but last 2 weeks it was just whirring sound and after i turned it off and turned it on it wont boot up anymore until now.
I am really stumped as to what the problem of my Macbook is. Any help would be really appreciated.

Go through the steps - one by one - that ds store outlines in his user tip, Step by step to fix your Mac.
Good luck,
Clinton

Hp psc 2110 all-in-one -best, normal fast lights just flash continually

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

My hp psc 2110 all-in-one I have had for a number of years and has never let me down before.
The problem started when I tried to print from a PC on my home network. The request was on the queue but wouldn't print and the 3 lights for Best, Normal and Fast Quality just flash continually.
I also keep getting a window come up entitled HP OFFICEJET REFLASH asking for the original setup disk.
I have responded and put the CD in the drive.
I have uninstalled the program and reinstalled a download from HP.com website but still the lights continue to flash.
Can anyone help PLEASE!!!!!
Best regards
The Mole
[email removed for privacy reasons]

MAC PRO won't boot up power light constantly flashes

So here is the situation. I left for vacation a week ago my mac pro was turned off and plugged into a UPS. When I came back and tried to power on the computer it turns on but there is no "Chime" but the power light does come on like normal (at first) and then just blinks constantly. The monitor stays completely black.
Here is what an apple tech had me do:
Unplug all devices and try powering on with the plug in a wall socket. Unplugging everything from the computer for 15 seconds (SMC reboot?)
No luck. He wants me to take it to a store... I hate taking my computer to a store and handing it over for an unspecified amount of time...
Could opening up the comp and manually resetting the SMC or clearing the PRAM work? I asked the tech what more someone at a store could do and he said they would just test the voltage. Do you need a special tool for that because I have a volt meter and I would much rather not take it to a store. If it is the power supply I would rather they send it to me to install.
Jeremiah

I wasn't aware PRAM batteries did any charging
Apple has used rechargeable batteries for volatile storage for some time.
and just 'held' information in NVRAM and PRAM when needed and there was no power coming in
I can't see data held in NVRAM/PRAM doing something like keeping time without some power. One can't assume a permanent Internet connection to update it when the system is turned on now can we?
I assume it is on a 1000VA UPS that has good battery and fully charged too, and didn't discharge during the vacation
If the UPS was turned off it's as good as being totally unplugged so it may well have still been at 100% upon return. There's no power delivery when the UPS is off remember.

Mac Pro will not boot. Power led just flashes

When I start up, the HD spins but then the power led starts flashing at a constant rate. It also never gets to the gong. I tried everything on the support pages.

Power On Self-Test Beep Definition - Part 2.
It would be helpful to be more specific about the flashes such as the sequence, timing, etc. So, you will need to examine the above and its links to see if you find something descriptive of what you have.

UC320W power light just flashing green ?

Similar Messages

Maybe you are looking for