Uc320W stuck at Upgrade utility

I run the firmware upgrade and it never finished.
Now when I try to login to management ip i am getting stuck at upgrade utility.
What is the password? I tried cisco:cisco but it does not work.
I tried to reset the box and same thing: stuck at upgrade utility.
thx

after reseting few times it finally took default password

Similar Messages

Stuck in Disk Utility...Please Help!

Tried to upgrade to Mavericks, failed, then made it worse by trying to clean and erase the drive without backing up. Long story short, bought macbook pro 13' from a reseller last summer, no issues, tried to upgrade a few weeks ago and failed now stuck on disk utility screen. Checked the serial number, not under warranty. Clicked on reinstall mountain lion, it said my apple id not affiliated with original purchase of software, so I bought it from the apple store on another computer. Can't download or open the zip drive since my plugins are blocked on my macbook pro in disk utility. Can it be fixed? Do I have to take it to the apple store to fix and if so any idea on how much it would cost to fix?

If it is a 2009 it will not do the command option R boot, it is not equipped to do Internet recovery.
Try the command R boot, that will try to boot off the recovery partition on the local disk.
If that fails you will need to get the original OS DVD that shipped with that system. If you do not have them and you can;t reach the seller you will need to contact Apple. They ill be able to supply the disk for a nominal charge
In any case, even if you can get the system running now, you should get the original DVD and do a clean install. Right now you are running on a machine, that while you own it, looks to Apple like it still belongs to the seller.

Unable to proceed with upgrade utility while upgrading from 10g to 11g

We have installed Weblogic server,configured the domain also performed the schema creation using the RCU and Installaed OBIEE 11.1.1.6.
But while running the the upgrade assistance utility facing the following error:
UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
Indicating no Oracle instance is found.
Full log file details from upgrade utility log:
ua2013-04-12-17-17-11PM.log
========
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Plug in Name : BIEE
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Display Name : Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Checking string translations
[2013-04-12T17:21:01.451-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] String translation check finished
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine components.
[2013-04-12T17:21:01.466-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to examine BIEE.
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] MBean connection made : service:jmx:t3://localhost:7001/jndi/weblogic.management.mbeanservers.domainruntime
[2013-04-12T17:21:01.482-04:00] [BIEE] [TRACE] [] [upgrade.BIEE] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] RPD = D:\SampleSales\samplesales.rpd
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [UPGAST-00138] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] upgrade exception occurred
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Cause: An unexpected upgrade exception has occurred. Action: See the secondary error message for additional details.
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [ERROR] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] UPGCMP-02712: Expected oracle.biee.admin:type=BIDomain.BIInstance.ServerConfiguration,* Oracle instance, found 0
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining BIEE with status: Failure.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished examining components.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Starting to list upgradeable items.
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Component name: Oracle Business Intelligence Enterprise Edition
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] No upgrade items found
[2013-04-12T17:21:01.482-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 16] [ecid: 0000Js07rGQ2fLMYEL3FFS1HQ7bN000007,0] Finished listing upgradeable items.
[2013-04-12T17:22:14.546-04:00] [Framework] [NOTIFICATION] [] [upgrade.Framework] [tid: 11] [ecid: 0000Js07Sxp2fLMYEL3FFS1HQ7bN000002,0] Upgrade was canceled by the user.
===================
Topology.xml file details:
============
<?xml version='1.0' encoding='UTF-8'?>
<topology xmlns='http://www.oracle.com/fmw-nonj2ee-topology'>
<ias-instance id="instance2" oracle-home="D:\OBIEE_Middlewarehome\Oracle_BI1" instancehome="
D:\OBIEE_Middlewarehome\instances\instance2" host="PEPWAP06411.corp.pep.pvt" port="9501">
<ias-component id="coreapplication_obijh1" type="OracleBIJavaHostComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_java_host"/>
<property name="originalAllocatedPort" value="9810"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obisch1" type="OracleBISchedulerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9708"/>
<property name="originalAllocatedScriptRPCPort" value="9707"/>
<property name="EMTargetType" value="oracle_bi_scheduler"/>
<property name="originalAllocatedPort" value="9705"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obis1" type="OracleBIServerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9701"/>
<property name="EMTargetType" value="oracle_bi_server"/>
<property name="originalAllocatedPort" value="9703"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obips1" type="OracleBIPresentationServicesComponent">
<em-properties>
<property name="EMTargetType" value="oracle_bi_presentation_services"/>
<property name="originalAllocatedPort" value="9710"/>
</em-properties>
</ias-component>
<ias-component id="coreapplication_obiccs1" type="OracleBIClusterControllerComponent">
<em-properties>
<property name="originalAllocatedMonitorPort" value="9700"/>
<property name="EMTargetType" value="oracle_bi_cluster_controller"/>
<property name="originalAllocatedPort" value="9706"/>
</em-properties>
</ias-component>
</ias-instance>
</topology>
================
Please help.
Thank you.
Regards,
MAK
Edited by: 1000104 on Apr 15, 2013 7:42 AM

There's a dedicated Web logic forum (WebLogic Portal where you might get better assistance. As i can't move your thread, please close this one and post your issue again in the web logic forum.
Thanks,
Klaus

Date Format in TDS Upgrade Utility Import

Hi
Could any know the exact date format in TDS Upgrade Utility in excel file. I tried with various formats like 01/04/2008, 20080401
Its getting error: String was not recognized as valid Date Time. And also if you know any suggestions and solution regarding utility upgrade. please tel me.
Thanks and Regards,
Sudhir B.

Hi Sudhir,
Try: 2012-01-01 to see.
Thanks,
Gordon

Error - TDS (TDS Upgrade Utility)

Hi All,
While running TDS Upgrade Utility following error had been occur
1) Outgoing Payments TDS] Primary Key not exist in DB: row.657
2)Withholding Tax Rates] Primary Key not exist in DB: row.2
3)[Outgoing Payments TDS Amounts] Value in excel should equal to value in DataBase : row.2675 col.Deposit Amount (SC)
Let me know some one face the same issue and get solved.
Regards
Anish

Hi,
Your list of error confirms that the excel which you have prepared to import using the TDS Upgrade Utility does not seem to ba complete (i.e Missing data) or all the sheets are not having data.
Please check the Excel sheet again for the data and also prepare it based on the documentation.
Kind Regards,
Jitin
SAP Business One Forum Team

Forms upgrade utility

Forms 9i has an upgrade utility to upgrade from forms 6i, does it work in 10G also? if not is there something in 10G which can do this?
Anil

Anil,
should work with Forms 10g as well.
Frank

TDS Upgrade Utility

Hi
I upgraded an DB 2007B to 8.81 PL 08.
Now i'm doing TDS upgrading by utility tool. My excel format for financial year master is
Absolute ID U_TDSFINCD U_TDSFINDC U_TDSFMDT U_TDSTODT U_TDSASEYR
when i click check data in that tool. i'm getting the error: Fail to Load Excel File
when i click UpgradeDB. I'm gettig the error message : In order to perform upgrade, database needs a backup. Upgrade failed.
I'm doing this in upgraded DB 8.8 PL 08. whether its correct. And what are all the other procedure for upgrading TDS which was not mentioned on the document. If any one upgraded TDS form 2007B means please give me an solution and suggestions.
Thanks and Regards,
Sudhir B.

Problem Solved.
There is an default excel file format in the TDS upgrading utility help file.

LG Ally - Apps crashing after install of Upgrade Utility for Ally

I was pushed down the "upgrade utlitly for Ally" after that an OS upgrade was pushed down but never successfully installed. I don't want to do a hard reset as I don't know if the system will just push down the utility again.
I have had nothing but problems after OS upgrades and have had to do multiple hard resets and have not had the phone for even a year.

@beverlyann76 Thanks for posting. I can certainly understand the troubles that you are having downloading the Upgrade Utility App for Ally. I did do some research on this and it seems the best way for the app to install successfully is to do a manual install. You can install the app here. Hope this helps. Thanks.

"Support and upgrade utility" of Multicap/Ultiboard 9 not compatible with windows installer

Yesterday I installed Multicap 9 and Ultiboard 9 on the new computer of my collegue. We haven't got a maintenance contract. It's possible to update Multicap 9 and Ultiboard 9 once after installing it on a new computer withou a maintenance contract. First the "Support and Upgrade Utility" wants to download and install a new version (1.0.36) of itself. When this update wants to start, I got a message of the Windows Installer that the msi is incompatible with the Windows Installer. The upgrade is cancelled after this message.
I tried to solve the problem to update Windows XP Pro SP2 to SP3, but that doesn't make sense.
How can I solve this problem?
Is it possible to download the update of Multicap 9 and Ultiboad 9 without the "Support and Upgrade Utility"?
With kind regards,
Marco.

Hello Marco,
thank you for your post on our webforum. I noticed some problems with the Support and Upgrade utility in the past (only on some computers). I think it is best to provide you with a new installer; it is possible to place this on a FTP server, can you contact me for this?
Best regards,
Martijn S
Applications Engineer
NI Netherlands

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

I have Elements 10. It doesn't handle RAW. It also doesn't allow more than one Fine JPG to be downloaded at a time. Can this be fixed with a download, or am I stuck to upgrade to Elements 13?

philips69374220 a écrit:
I have Elements 10. It doesn't handle RAW.
Yes, it does.
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
It can handle the raw files covered by the ACR 6.7 version.
For newer cameras, you can use the free Adobe DNGconverter to batch convert a folder into the DNG raw format that PSE10 can read and edit.
(see the link in the upper document)
Fine JPG to be downloaded at a time.
All versions of Elements can open many jpegs at the same time, and the organizer lets you import as many as you want?

"Failed to load excel file" an Error Message while running TDS upgrade util

Dear All,
"Failed to load excel file" an Error Message while running TDS upgrade utility when clicking on CHECK DATA.
Please help me out on this!!!!!!!!!!!!
Thanks..........

Not all data can be exported to Excel easily. Especially if the query result is huge or there are special characters in the query results. You may try the most updated version.
Thanks,
Gordon

Auto Upgrade Utility for WRT54GL v1.1

Is there an Auto Upgrade Utility for WRT54GL v1.1?
I searched but could not find one.
Jeff

try EASYLINK CONNECT ...

My MacBook is stuck in Airport utility

My MacBook Pro is stuck in Airport utility and will not switch off, I was trying to connect a printer via the Base Station, tried to cancel, that is what it says it is doing but has been for 40 mins, tried escape, switching off, but is jammed. Help

Thank you for taking the trouble to reply, had already tried all of the above, to no avail in the end had to force quit by holding down start button. Next morning when I started up it asked if I wanted to go into problem application or wait for start up I took 2nd option and all seems ok. Again thank you C

Ical is stuck on upgrading !

My ical has been stuck on "Upgrading ical Calendars" for two days now - i have force quit but still same - can anyone help please?

jrObert,
The advice that was given for the OP was offered almost three years ago, and the OP was using OS X 10.6. You are most likely using a newer version of OS X. Try this updated list of instructions.
1. Disconnect your computer from your internet connection.
2. From the  Menu, select Force Quit...>Calendar.
3. Paste this text ~/Library into the Finder>Go>Go to Folder...window and select "Go." This will open the Users Library Folder.
4. Then open the Calendars Folder in that Library Folder, and move any any files with "Cache" listed in the name field to your Desktop.
5. Next open the Preferences Folder in the same Library Folder, and move the com.apple.iCal.plist file to the Desktop.
6. Log out/in or restart, and open Calendar.

Where can i download the Auto Upgrade Utility?

I can't find it anywhere on your site. Im trying to upgrade the firmware of my WRT54GS since its power LED keeps on blinking. I'm trying to do the instructions on this link http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=175&p_created=1084205858&p_sid=btIGUT4i&p_accessibility=0&p_lva=703&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9Mjc1JnBfcHJvZHM9MCZwX2NhdHM9JnBfcHY9JnBfY3Y9Jn but i can't continue because i don't have the Auto Upgrade Utility. please help. thanks in advance.

I had the same problem, and followed the instructions as provided in several posts on the internet, without much help. Main problem was that I could not find the Auto Upgrade Utility or TFTP.EXE anywhere on the Linksys website, although I tried to use TFTP in Windows XP Pro. It did not work; the result was Successfully transerred 311 bytes, although the file was 2.99MB in size.
I called Linksys Tech Support and got a patient chap who didn't just tell me to go buy a new router, but knew what I was looking for. The first chap hung up on me, because he didn't seem to know much more than what he was seeing on his screen prompts, which basically got him to: "Buy a new router!"
The Auto Upgrade Utility can be located by going to the donwload page for the BEFW11S4 download page (http://www.linksysbycisco.com/US/en/support/BEFW11S4/download) and selecting the v3.2 hardware, as this is the only one that displays the very particular Setup Wizard link for download; someone should lose their head over this one! Why don't they just document this. The filename is BEFW11S4-v2_SetupWizard.exe (aka the Auto Upgrade Utility). Safe it to a folder on your hard drive.
Once you have downloaded the utility and the latest firmware bin file for your router (preferably in the same folder), use these brief insstructions/tips to upgrade the router:
Connect via an Ethernet cable to one of the router's LAN ports (not Internet/WAN port) at 10 or 100 MB/s, half-duplex; slower the better, but it worked at 100 MB/s for me. Use a static IP address such as 192.168.1.101 for your computer.
Make sure you can ping the router from the command prompt (ping 192.168.1.1).
Reboot the router.
Run the utility, and use Server: 192.168.1.1, Password: admin, and locate the firmware bin File from the earlier download.
Again, ping the router from the command prompt, just to make sure it is still connecting and not timing out.
Click Upgrade. If all is well, the router will be upgraded without a problem.
IMPORTANT: Give the router a couple of minutes to reboot and settle down. When I upgraded the first time, the power light was still flashing and I (and the Linksys technician) thought it had failed and unplugged the router to see if a reboot would solve the problem. It did not. I repeated the steps, and this time I waited a couple of minutes, and voila(!) the power light became steady and the router worked like it was brand new again!
Hope this helps. Locating the Auto Upgrade Utility was the key to solving this problem for me.
Suny

Uc320W stuck at Upgrade utility

Similar Messages

Maybe you are looking for