UC500 with integrated wireless AP

Notebooks can authenticate for serveral day and suddenly they cannot. The only thing that helps is a reload.
This is the message I'm getting when I cannot reconnect :
%DOT11-7-CCKM_AUTH_FAILED
Thx
Filip

Version 12.4(22)T
did work with previous IOS versions

Similar Messages

Wireless keyboard with integrated trackball

I'm looking for a wireless keyboard with integrated trackball (for the mouse function) to be used with a mac mini (leopard).
Any suggestion?
The apple wireless keyboard looks very nice, but would require a separate mouse and mousepad. That would not work very well with the intended setup (mac mini connected to the TV and keyboard/trackball used from the couch).
Paolo

This trackball looks pretty good according to its reviews and specs:
http://www.amazon.com/Kensington-Wireless-Optical-Trackball-64329/dp/B0000YDGSO

Wireless capability Compaq Presario SR1950NX with Integrated 10/100 Base-T networking interface

Wireless capability available for 6-year old Compaq Presario SR1950NX desktop with "Integrated 10/100 Base-T networking interface" ? How best to do this. Wireless adapter via USB 2.0 ? Have Time Warner's modem and my Linksys N750 router in another room, and want to use wireless printer in a third room. Router currently serves Smart TV and a Lap Top in different rooms.

Hi:
Yes, the easiest thing to do is to purchase an external usb wireless adapter.
I just got this one for my desktop.
http://www.linksys.com/en-eu/products/adapters/AE3000
You can read some customer reviews on the adapter at the link below.
http://www.newegg.com/Product/Product.aspx?Item=N82E16833124477
I am very happy with mine. It connects to my Linksys E4200 router at 450 MBPS on my N only 5.0 GHz band.
I believe that is the maximum throughput for the AE 3000 wireless adapter.
I also like that it comes with the 3' usb extension cable and cradle to position the device for the best reception.

New Thinkpad W530 order direct from Lenovo with integrated mobile will not connect to broadband

I purchased a W530 with integrated mobile and have been trying to connect with various networks to no avail. I have a Type 2436-CTO S/N xxxxxxx 13/08 and Windows 8 came installed when I received. I have upgraded BIOS and everything that Lenovo solutions says I need to update.
The MEID is A1xxxxxxxxxxx. It came with an integrated Sierra Wireless MC8355-Gobi 3000 modem. I have downloaded an updated driver for Windows 8 for the MC8355. I have spoken with almost every Lenovo technical person as well as taken the computer to various network stores and so far no one can figure out why it won't connect to Verizon.
Verizon says I'm active and the computer error message says I am not active. Every tech has tried to look at the system by logging into my computer and no one can figure it out. The device manager says the MC8355 is working. Interesting when it was shipped to me it also had an AT&T sim card installed. After I had signed up with AT&T and one mo of paying for service they determined it would not work on their network. Finally someone told me to take the AT&T sim card out and it still will not connect.
Verizon tells me I do not need a sim card as I have the MC8355 but they can't tell me why I can't connect. Now I've paid for Verizon service for one month and still cannot connect. Everything else works fine with the W530. I've owned ThinkPads exclusively since the first one ever came out. I've never not been able to connect to mobile broadband with any others. I also went through about two weeks of trying to connect with Lenovo Mobile Access and that did not work because I'm running Windows 8. Finally a nice gentleman called me from LMA to tell me it will not work after all the time of connecting and being on the road. I could go back to an old ThinkPad to travel with but I'm determined to get my new one to connect. Any more advice or anything anyone can tell me try?
Moderator Note; imei & s/n edited for member's own protection
Solved!
Go to Solution.

Hi swade01,
Have a look there: http://support.lenovo.com/en_US/detail.page?DocID=HT077670
It might help you hopefully.
Vince.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Integrating wireless in 11i EBS

Any links for integrating wireless with 11i EBS. I need to do the setup to do workflow/wireless integration from oracle EBS 11.5.10.2.
Please advice.
Thanks in advance.

Please see the following link for Workflow/Wireles Integration
http://www.oracle.com/global/in/corporate/presentations/owmumbai/Tech-Mobile_processing-Lakshmi_Venkatakrishnan.pdf
Good news is I have set up the java workflow mailer and every thing is working fine we are able to recieve email alerts to our email boxes as well as to blackberry device.
But one last issue still remains. When the approval notification email comes to blackberry device, and when the approver tries to approve the request by pressing the approve link, the message box is completely empty and the requester doesn't get any message in the email but the request gets approved. Is there any setting that I have missed

1310 with integrated antenna for 100M client conneciton

I would like to use as a AP to connect from my laptop which 100M away. Is it possible to use aironet 1310 with integrated antenna for this approach? Any experience?

Yes, You can use the 1310 device and configure it as a AP and connect it to your Wireless laptop. The Cisco Aironet 1300 Series Outdoor Access Point/Bridge is a flexible platform with the capability of access point, bridge, and workgroup bridge functionality.

UC500 with Analog Line

Hi guys,
I have a question regarding the UC500 models.
Would it be possible to use an analog line with the UC500?
I've used SPA3000 till now and I'd like to integrate a UC500 with multiple analog lines.
Has anyone had this scenario before?
Thanks.
Regards

This is possible via integrating it as a sip end-point.
Sent from Cisco Technical Support Android App

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update:

Problems with Verizon Wireless BlackBerry Tour BlackBerry OS 4.7.1.61 update - I was anxious to download the update to see if it addressed the sticky trackball problems and the low volume issue when using a blue tooth device. However, in the process of updating my BB Tour yesterday, the install stopped on the 8th out 12 updates. After a couple of 'retrys', the BB error message on the desktop came up which instructed me to: i) disconnect the device, ii) restart the computer. iii) restart the loading process and, iV) restore my data by loading the loader back-up file using Restore. Unfortunately my Tour was left without any software and the Desktop manager couldn't recognize it. The error message on the Tour was 503. Called Verizon Wireless tech and bottom line, the only fix is a new Tour, which they're sending me. Anyone else having issues with the update? Also, does it address the trackball and blue tooth issues?

I had issues with the trackball and had to have my Tour replaced. I was told this model does not have a removable trackball so the entire phone has to be replaced. My current one is working OK but does stick a bit. Seems to get worse over time. My wife's tour is newer and so far she is not experiencing the problem. Have not experienced a problem with the Blue Tooth volume.
I have another issue with this upgrade that I am wondering if anyone else has seen. My wife has the Tour as well. She was prompted to do the upgrade and went through it. It appeared to work except it blew out her Contact Alerts. When we put them back in we can no longer get the sound to play when she receives an SMS message in her holster. Vibration works but doesn't do any good when it is in her purse. Phones calls, calendar alerts, alarms all work in holster. As soon as we delete the contact alert the default SMS alert will play in the holster. If she takes her phone out of the holster the Contact alert will play. My phone is still running 4.7.1.40 and this function works fine. I am thinking about trying to put her's back to my version if possible but not sure the best way to go about this

App-V 5.0 // Visio - Project with Integration + local Office 2010 Deployment Kit and COM settings

Hi, I did read all the Microsoft and non-microsoft documentation first. However, I didn't find an answer to these 3 questions:
Situation:
* Locally installed Office 2010.
* Visio and Projects 2010 sequenced with App-V 5.0 SP3 sequencer with integration scenario (http://support.microsoft.com/kb/2830069)
* User-target of Visio and Project (I now according to documentation this should be published globally. Since not every user has a license this is no option. So far my tests do not show any problems with user-targeted visio/project)
* Visio has "allow COM objects to interact with the local system" and "OutOfProcessEnabled" enabled
1) When targeting both visio and project to the user with integration the licensing component only works for the first started application. Therefore I also install the licensing kit locally which make both the visio and project licensing work just fine.
Anyone sees a problem with having the license kit installed locally and stream the applications with integration on top? With my tests all seems to work well. The advantage of this is that I do not have to have separate packages for integration and non-integration
scenario's.
2) To make drag-and-drop from visio drawings in word work I enabled the COM interaction and I need also to set OutOfProcessEnabled="true". Does anyone now how to set OutOfProcessEnabled to true inside the .appv (it is possible with application
virtualization explorer) and not only manually afterwards in the xml's?
3) Should these COM settings be enabled for project as well? It seems that pasting in word from project has not the same interaction, it just pastes a table.

1. We did similar, installed that MSI for the licensing component locally, and streamed Project and Visio 2010, and so far so good.
2. There is no way to set those COM options inside the .appv. You can set integrated vs isolated, but no IP or OoP COM, you have to use the deployment XML.
3. This gets tougher to answer, but it goes to how much isolation do you want. Some of the articles are great just go over my head slightly, but have to deal with how the filter driver processes certain kinds of COM, IP or OoP. With Isolated
(as opposed to integrated) the COM systems (local and package) are totally isolated except for global exceptions.
With integrated, you can further 'integrate' the COM subsystems by enabling those options. Correct me if I'm mistaken though.
So do you need to? If everything works for you I'd say no, but you might find something else doesn't work without those settings.
Also very important, you cannot join a CG without those subsystems being equal. So if Project and Visio ever need to be in a CG together and the COM settings aren't identical, you will get an error at the client.
I really like this article but not going to lie it goes over my head a bit (a bit or a lot depending on my coffee intake)
http://blogs.technet.com/b/gladiatormsft/archive/2015/01/14/app-v-5-further-into-com-and-dynamic-virtualization.aspx

How can I reach a person with Verizon Wireless

Due to Hurricane Sandy I have a bill payment problem. I called my bank this morning to see if they were open. They were. I drove to the bank to make a deposit and they had already closed so I could not make the deposit. Tomorrow is a wait and see. I may not have power. That wouldn't prevent me from making a deposit. If my bank is closed due to no power and I can not make a deposit what will happen with a payment I made via phone using my checking account information already saved in the billing part of Verizon Wireless. I always make my payment either via computer on-line or by phone. Always using my same checking account. I knew I could get to the bank the next morning (today, Monday, November 29th) and there would not be a problem. I even went to my checking account and checked on line. The Verizon payment which would show up as an ACH (I think I got that right, I don't have my checking account open and in front of me right now) payment and indicate it was to Verizon Wireless was not on my account yet. My concern began to grown as the storm is causing so many closures. Tomorrow the bank may be open, I make my deposit, and no problem. I wish I had the security of speaking with someone from Verizon Wireless since this is something I've never encountered and hopefully never do again. I am a worrier. I try not to worry about things I can not do anything about. Considering that my cell phone was my only contact once power goes I wanted that security or I would have waited and done things in the opposite and normal order. I do not know how and have not been able to reach an actual person with Verizon Wireless. I am hoping someone else will have the answer to my question and know how to reach a person. I would then stop worrying. I have been a Verizon Wireless customer for about ten years and I have four cell phones on my plan including my father who lives alone in Groveland, FL and was nearly killed in a tractor accident a few years ago. He did not have a phone. I have gladly provided him with one and I don't want to jeopardize my wireless account. That is why I am so worried about this. He is worried about me up here in this storm and I am always glad to know I can reach him to check on him since he lives alone. Verizon Wireless provided the security I needed for myself, my father, and my son. Any help would be greatly appreciated.
Sincerely,
Must have cell phone family - Janice

Hi Ebru,
Subsequence results are actually stored in their own resultlist container within TS.Sequencecall, which is accessible through the following statement:
Locals.ResultList[step].TS.SequenceCall.ResultList
where step is the index of the sequence call step. This resultlist is structured in the same way as the main resultList array. You can also access your subsequence directly from the sequence file container if it is in the same sequence file as the main sequence. Navigate to this reference using the following:
RunState.SequenceFile.Data.Seq[sequenceName]
Using this reference, you can access the containers for each step's result container.
Hope this helps!
Al B.
Staff Software Engineer - TestStand
CTA/CLD

I want to run down how dissatisfied I currently am with Verizon Wireless

I want to run down how dissatisfied I currently am with Verizon Wireless; this stated with the pre-order of the iPhones on Friday I like many other customers received the "ecdp" error on the web site and it took 45 minutes to actually be able to place the order. I got the order in and had a 09/19/2014 ship date; spoke with a few Customer Service Reps in various areas such as 611, on many of the 800 numbers available, Internet Orders (including a Supervisor) and even a Social Media Service Rep all who have confirmed this ship date to be accurate.
Well today (09/17/2014) I check the Pre-Order Status page and my date has been changed to 10/14/2014 so I call in to speak to Internet Orders and the Rep advises me that yes my date was pushed back but no reason is supplied, I asked to speak to a Supervisor and was transferred to Howard, Operator # 2431235, who stated that yes the prior rep was accurate and that there was no reason available as to why my ship date changed. Howard continues by stating that as per upper management, Apple reported to Verizon that no iPhone 6+'s would be available at launch for Verizon to ship and that this has been common knowledge, within the company, that the 6+'s were not shipping until 10/14/2014, and that prior Verizon employee's to include supervisors were misinforming me of my shipping date. Howard continued to state that the reason I got the "ecdp" error was because of the company that I work for as Verizon offers a discount so the 'ecdp" error is not something Verizon is currently addressing. Howard then tells me not to worry that with the 10/14 date is a guaranteed delivery date and not to worry, if the phones come in early the order will be filled, I at this point ask Howard to note my account with our conversation to include the fact that he stated the 10/14 was a guaranteed date, at this point he states that while he is telling me this he will not put it in writing as at that point Verizon would be obligated to meet that date at minimum and he was not willing to put his position on the line if the phone is not shipped by that date(this can be confirmed by reviewing the recording of the call as I was advised that I was on a recorded line). I then asked to speak to his supervisor and was told his supervisor went home for the day and that he was the highest level supervisor on at this time. When I then asked for his supervisors contact information to lodge a complaint he said that I would need to call back in on 611 from my handset as Customer Service handles complaints not supervisors.
I did call back and speak with a Representative on 611 who tried to assist but was not able to do much, this rep took my information and is having their supervisor call me to try addressing the way Howard handled the call however this has not occurred at the time of this writing. I did tell this rep that I was honestly considering going to another carrier, (I have been with Verizon 7-8 years and currently have 10 lines of service on my account) I know I will not get the iPhone 6+ on launch day with another carrier which was not the driving factor but rather the way Howard dealt with the situation and the lack of respect that as a customer of Verizon I have always got from other representatives, as you know it takes one person to sour someone on a whole company, Howard even stated that if I want to go to another carrier that was fine with him. However, the Customer Service Rep I spoke with after Howard (I wish I could remember his name) calmed me down not to leave Verizon but did agree that a complaint needed to be filed, personally I would like to file it directly with an Associate Vice President or higher but do understand that there is a “Chain of Command” that needs to be filed
Let this be a warning to anyone who call internet sale and gets Howard, operator #2431235, I would suggest you immediately request a different supervisor that will treat you with respect. As stated above Howard will tell you that the iPhone 6+ was not and has never been available to ship on launch day due to Apple purposely not providing enough units to meet the demand and that Verizon knew this while taking our pre-orders.

I feel your pain Robert. I do believe VZW and Apple knew all along the I6 Plus would not be available on 19 Sep and that it was a way to bolster new contracts, renewed contracts and apple sales stats. It's unfortunate the company wasn't more clairvoyant, most of us would have still pre-ordered but been a little less frustrated.

SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has be

Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SE\levalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme

Well here's my problem, maybe you can help. Intermittenly I get a login failed when connecting to a db engine through Server Management Studio using Windows authentication. When this happens the following entries are generated on the server's application event log:
Event Type:        Error
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              17806
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: <ip address>]
Event Type:        Failure Audit
Event Source:    MSSQLSERVER
Event Category:                (4)
Event ID:              18452
Date:                     1/14/2009
Time:                     10:41:31 AM
User:                     N/A
Computer:          <server name>
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: <ip address>]
I've already ensured that the server is set to mixed authentication mode. Oddly enough, the workaround that I've found is that if I remote desktop into the server, log in and then log back out, Management Studio is suddenly able to connect again. No idea why it works.
As I said before, it is intermitten. Some days it errors on login, other days it doesn't and there are no configuration changes between them. Also, both client and server are in the same domain and same site so there is no VPN or anything in between. I'm really quite stumped. Any help would be great, or if you can point me in the right direction of where to look. Thank you in advance!

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.

What's the proper protocol for a reset on my ipod touch 4g? iOS 6 has totally jacked it up and it will no longer do anything but crash, and won't sync with itunes wirelessly or by cable.
It's a 64G ipod touch and was fine till Apple told me to upgrade to ios 6. Now most of my apps crash, my music won't play and I just get a white screen when I hit Music.
When I try to sync to itunes it acts like it's going to sync and appears to recognize the ipod, but it's grayed out and has an update circle by it that spins for a while until itunes eventually freezes alltogether. Is there a way to go back to ios 5 after a erase and reset?

iOS: Unable to update or restore

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?

Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.

yes

My iPad is no longer communicating with my wireless printer since last two upgrades!

My iPad is no longer communicating with my wireless printer since last two upgrades!

1. Turn the router, iPad and printer off
2. Turn on the router and then wait 30 seconds
3. Turn on printer and then wait 30 seconds
4. Turn on your iPad and test print.

UC500 with integrated wireless AP

Similar Messages

Maybe you are looking for