UC520 List of supported phone types

Hi There,
It seems that I'm doing something wrong, but i dont know what is it!.
Im using CCA and UC520w, when i go to User/phones and then add, than phone type, i see around 20 types of phones, even though it should be way more, because when i go to manage phone loads i see way more phones there!, (I also deleted and added all phone loads from the latest software pack, but that did not fix the problem)
What im trying to do is, to add CP-7936 on UC520, but as i said i cant find it on "phone type" even though the phone load already exists on flash card.
any idea would be highly appreciated.
Thank you

Hello filan0011,
You may find the supported phones with CCA(3.2.3) in the release notes on the following link:
http://www.cisco.com/c/dam/en/us/td/docs/net_mgmt/cisco_configuration_assistant/version3_2_3/release/notes/cca_3_2_3_relnotes_2_July_25_2013.pdf
7936 is not listed there but you may add it in the CLI.
HTH,
Alex

Similar Messages

SPA514G not listed in available phone type

Hi All,
Currently implementing a UC540 with 6 x SPA514G phones.
I ran through the CCA Telephony Wizard and was able to add one of the phones without issue.
Since then I have tried addding more 514G's through CCA Users/Extensions
CCA finds the phones, but when I choose to edit one of them the Phone Type is not listed and is greyed out, so cannot be changed so I cannot add a user to this phone.
Also to note even though I was able to add a single 514G during the Telephony Wizard it is also listed as 'Unknown' and is greyed out, but it has been successfully configured for that user.
If i try to add the phone before plugging it in the 514G is not listed in the options.
I suspect that an upgrade to the 8.6.0 software pack is the first thing to do.
Unforutnately I don't have access to unit so I'm not sure what pack it is on at the moment.
Any suggestions?

The SPA series handsets and ATAs are widely used in hosted call control environments with SIP proxies from a variety of vendors, so the phones were released as soon as they were fully developed and had successfully completed the QA process. The release schedule for the UC500 did not line up closely enough to this to do a simultaneous release of support across all platforms.
Cheers,
Dave.

Add 6233 in the list of supported phones NSU!

subj, plz
6233 fw 4.91

I couldn't wait any longer for Nokia to get around to providing online updates to the 6233 through the NSU (if indeed they ever will) because my 6233 running the original 3.7x firmware finally just completely stopped booting up at all. It had been giving me problems booting up for weeks, but it finally just completely died.
So I got the new firmware installed (v4.91) at the local Nokia Care Center. They did it while I waited (took about 2 hours) which was pretty nice. However, the most important thing is after the update my phone is working much better with the new firmware. It seems to have solved the problems I was having with my phone refusing to boot up after it had been powered down. It's only been a couple of hours since the update but it's looking good so far and I've booted it up several times with different sims with no problems yet.
So to all 6233 users who are experiencing problems powering up their phones, I highly recommend getting the updated firmware installed ASAP.
Currently using 6300 & 6233 (backup)

MacOS X 10.4.6 new list of supported phones

Lot of new phones here... including the long awaited Series 40 phones:
http://www.apple.com/macosx/features/isync/devices.html

iSync v 2.2 (108.0) will no longer install iSync Agent to the phone. Instead it will sync using 'PC Suite' agent to sync the Address Book and iCal.
"Browse Device' is still not working though.
MY N90 FIRMWARE:
V.3.0545.5.1
07-11-05
RM-42
images:
http://i15.photobucket.com/albums/a352/antz88c/isync.jpg
http://i15.photobucket.com/albums/a352/antz88c/FEscr001.jpg
http://i15.photobucket.com/albums/a352/antz88c/FEscr000.jpg
Lets just hope Nokia will come out with a mac suite soon.

List of IP Phone Support Recording with Engage Recording Server

Hello,
I have a project whereas Engage Recording System will be integrated with UCM 10.5, However I'm trying to find the list of supported phones that can be able to record dual streaming specially for the following phones:
7975
7945
7841
8831
7926
Please advise.

The report Jamie is referring to is under Cisco Unified Reporting > System Reports > Unified CM Phone Feature List. You would choose Product: default, Feature: Built in Bridge.
Here's the output from a CUCM 8.6.2 cluster:
Product Protocol Feature Parameters
Cisco 6911 SCCP Built In Bridge
Cisco 6921 SCCP Built In Bridge
Cisco 6941 SCCP Built In Bridge
Cisco 6945 SCCP Built In Bridge
Cisco 6961 SCCP Built In Bridge
Cisco 7906 SCCP Built In Bridge
Cisco 7911 SCCP Built In Bridge
Cisco 7921 SCCP Built In Bridge
Cisco 7925 SCCP Built In Bridge
Cisco 7926 SCCP Built In Bridge
Cisco 7931 SCCP Built In Bridge
Cisco 7937 SCCP Built In Bridge
Cisco 7940 SCCP Built In Bridge
Cisco 7941 SCCP Built In Bridge
Cisco 7941G-GE SCCP Built In Bridge
Cisco 7942 SCCP Built In Bridge
Cisco 7945 SCCP Built In Bridge
Cisco 7960 SCCP Built In Bridge
Cisco 7961 SCCP Built In Bridge
Cisco 7961G-GE SCCP Built In Bridge
Cisco 7962 SCCP Built In Bridge
Cisco 7965 SCCP Built In Bridge
Cisco 7970 SCCP Built In Bridge
Cisco 7971 SCCP Built In Bridge
Cisco 7975 SCCP Built In Bridge
Cisco 8941 SCCP Built In Bridge
Cisco 8945 SCCP Built In Bridge
Cisco IP Communicator SCCP Built In Bridge
Cisco 3905 SIP Built In Bridge
Cisco 3911 SIP Built In Bridge
Cisco 3951 SIP Built In Bridge
Cisco 6911 SIP Built In Bridge
Cisco 6921 SIP Built In Bridge
Cisco 6941 SIP Built In Bridge
Cisco 6945 SIP Built In Bridge
Cisco 6961 SIP Built In Bridge
Cisco 7905 SIP Built In Bridge
Cisco 7906 SIP Built In Bridge
Cisco 7911 SIP Built In Bridge
Cisco 7912 SIP Built In Bridge
Cisco 7931 SIP Built In Bridge
Cisco 7941 SIP Built In Bridge
Cisco 7941G-GE SIP Built In Bridge
Cisco 7942 SIP Built In Bridge
Cisco 7945 SIP Built In Bridge
Cisco 7961 SIP Built In Bridge
Cisco 7961G-GE SIP Built In Bridge
Cisco 7962 SIP Built In Bridge
Cisco 7965 SIP Built In Bridge
Cisco 7970 SIP Built In Bridge
Cisco 7971 SIP Built In Bridge
Cisco 7975 SIP Built In Bridge
Cisco 8831 SIP Built In Bridge
Cisco 8941 SIP Built In Bridge
Cisco 8945 SIP Built In Bridge
Cisco 8961 SIP Built In Bridge
Cisco 9951 SIP Built In Bridge
Cisco 9971 SIP Built In Bridge
Cisco ATA 187 SIP Built In Bridge
Cisco Cius SIP Built In Bridge
Cisco Cius SP SIP Built In Bridge
Cisco DX650 SIP Built In Bridge
Cisco IP Communicator SIP Built In Bridge
Cisco Unified Client Services Framework SIP Built In Bridge

A list of supported Android Phones for Cisco Jabber Client.

Hi there,
I opened a discussion before about the Cisco Jabber Client for Android phones.
This product from Cisco is only official support bij a several mobile Android telephones. (very poor)
As everyone knows is that the mobile market is continious in development. Since a half year the official support phone list is still the same, but a lot of new Adroid phones are now on the market.
It's even so worse that some of the Cisco supported phones, are not available anymore in the market.
- Samsung Galaxy S2 becomes a Samsung Galaxy S3
- Samsung Galaxy TAB is still there
- Samsung Galaxy S (are not available anymore) The S1 or S Plus are now becoming the Samsung Galaxy S Advanced.
At what are the alternatives?
Still the list on the documentation is out-dated.
See:
Samsung Galaxy S International (GT-I9000) with Android operating system (OS) Version 2.2.1 or 2.3
Samsung Galaxy Tab International (GT-P1000) with Android 2.2.1 or 2.3
Samsung Galaxy S II (AT&T) with Android 2.3
To use Cisco Jabber for Android on the Samsung Galaxy S device, it is important that you upgrade your handset OS to Android Version 2.2.1 or 2.3. See the manufacturer/carrier site for more information about how to update the OS on your device. Minor voice quality issues may be experienced depending on the device used.
So hopefully Cisco is still working on the Cisco Jabber solution, and a lot of mobile Android phones will be supported so the road to success will be open.
Hopefully someone can help me to list of tested and supported phones (Official bij Cisco)
Kind regards,
Edgar

The official list of tested Android phones is what you've already discovered. With the next release of Cisco Jabber for Android, I'm sure it will be updated.
While the official list of what we tested is short, the client will work on many Android devices and TAC will provide support if you run into technical issues; provided the issue is with the Cisco Jabber client itself, and not with the OS of the manufacturer.
If there is a specific Android phone you are looking to have officially tested by Cisco, PM me with that information and I'll work with you to see what we can do to get it added.

MS Word not listed in Acrobat 9 supported file type (Windows 7 64 + Office 2007)

Installation details:
Windows 7 64bit O/S
MS Office 2007
Acrobat 9 Professional
When attempting to create a PDF from multiple files or combine multiple files into one PDF (single or package/portfollio) Microsoft Word is not listed in the supported file type drop down menu. This means when I navigate to a folder containing *.doc files I cannot see them. I tried adding *.doc files via drag and drop but Acrobat listed red exclamation marks stating it could not convert that file type. MS Excel, Powerpoint and Publisher appear in the supported file type list.
I believe this may be a Windows 7 compatibility issue as the same problem occured when using Acrobat 8 Standard prior to installing Acrobat 9 Professional. MS Word files are supported when both Acrobat 8 & 9 are installed on a Windows XP system.
I can create a PDF of individual MS Word documents using the acrobat tab inside MS Word itself.
I have thousands of Word files I need to combine into PDF portfollios (packages in Acrobat 8 I believe).
My great appreciation if you can provide any help.
Regards
Sunny

Bill@VT wrote:
OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
Well, thumbnails in Explorer don't work either, but we're not concerned about it. The preview pane is what we're worried about. There is a button in the top-right that turns the pane on. Previewing in Outlook does not work either.
Sabian Zildjian wrote:
Check the value for AppID in this registry key:
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
What do you have?
{534A1E02-D58F-44f0-B58B-36CBED287C7C}
DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark

I'm still plagued by these warnings in my Flex project:-
The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark'
Clicking on the warnings doesn't take me to the code.
The project started as SDK3.5. I've made it into an SDK4.0 project. It uses old Halo components throughout. I've chosen a Halo theme.
I can get rid of these warnings if I "Use Flex 3 compatibility mode". BUT, If I use that mode, I get also Run Time Errors - so I decided against this compatibility, and just edited the styling, deprecated syntax, and a few issues to make the app work.
I tried the solution someone suggested editing the flex-config.xml file, but it didn't work for me.
The application begins...
<mx:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:s="library://ns.adobe.com/flex/spark"
(I've obviously tried clean).

Yes, very irritating. "Only a warning" isn't the whole story, it's more than just an annoyance, it can potentially make all warnings useless.
Imagine cases where you have multiple warnings (often FB warnings turn up for EACH component resulting in many repeats, design mode is particularly bad with this). Having a ton of warnings that "aren't really warnings" obscures REAL warnings that we'd want to do something about (and makes errors harder to notice at first--you're so used to always seeing lines under the problems tab that you don't always notice a new error that just popped up). In the worst case scenario a valid warning that would have prevented a bug is missed and something goes to QA or production that should have been caught at compile time...
This wouldn't be nearly as annoying if we had some decent way of filtering these warnings from the problems tab. The current filter isn't good enough and only seems to allow you to filter out one message due to the way it works, but sometimes we see more than one type of "bogus" warning.
Voted and added to comments. I wonder if there's a feature request out there to improve warning filter capabilities? I also wonder why nobody complained about this before, it seems pretty easily visible. Is it the norm for people to just always ignore warnings? This isn't a good practice, warnings tend to exist for a reason.
(Btw, this is part of my reasoning for the claim that Halo seems to have become a "second class citizen" component set - hopefully Adobe can do something about this.)

Store integer list in Windows Phone Memory

Hi!
I need to store a list of integer values in the Windows Phone (8.1) memory, preferrably using the Windows.Storage namespace as an ApplicationData.LocalSettings. How may I acheive this?
I tried doing the following to create a new List<int> out of a key stored in the the LocalSettings.Values dictionary;
using Windows.Storage;
var AppSettings = ApplicationData.LocalSettings;
List<int> IntegerList = new List<int>();
try {
IntegerList = (List<int>)AppSettings.Values["IntListInMemory"];
catch { }
return IntegerList;
I apologize if my code is unprofessional and buggy (it is, because it throws an exception regarding an un-supported data type); I'm a nnewbie to WP 8.1 Dev.
Tx. :)

Well if IsolatedStorage is acceptable, then a simple code could do that:
IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;
List<int> ListObj= new List<int>();
ListObj.Add(1);
ListObj.Add(2);
ListObj.Add(3);
if (!settings.Contains("IntKey"))
settings.Add("IntKey", ListObj);
settings.Save();
// And to retrieve the list:
List<int> ListObj= readSetting("ListObj") != null ? (List<int>)readSetting("ListObj") : new List<int>();
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8
Hi Vineet24,
I think IsolatedStorageSettings will not be supported in windows phone 8.1(xaml), are you sure about it ? Just curious to know.
Pradeep AJ

How do I remove my iPhone 3G from list of stolen phones? It was stolen and then returned.

How do I remove my iPhone 3G from list of stolen phones? I reported it to Apple as stolen and it was blacklisted so that whoever stole it would not be able to register it with apple. The phone was returned to us 3 weeks later.

Apple does not blacklist devices and has no list.
" Apple does not have a process to track or flag lost or stolen product "
http://support.apple.com/kb/HT2526

Why is 6790 not in the list of supported devices ?

My Nokia 6790 came with Ovi Maps installed, however when I try to upgrade I am asked to select the model from a list, and the 6790 is not listed.
Why is 6790 not currently in the list of supported devices ?

@alanbarneys -jj was just quoting a previous post. His posts are always like that. Even I at times have trouble reading them.
Anyway, to answer the question regarding free maps to the 6790. This is a special case since AFAIK the 6790 Surge is a special edition phone available only through AT&T. Such special edition phones often do get software later. However, Nokia did promise to get newer phones availability to the Free Maps service this month.
Please note that for certain models (the N86 in particular) are rumored to have a scheduled update for this month to make it compatible with maps. All you can do now is to wait and see if the 6790 is going to be one of the units with the upcoming update.
Please note that currently, the only devices supported are those with the s60v5 operating system (touch screen) and non touch screen phones with s60v3FP2 operating system with 600mhz processors.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type...

I have a website that holds 23 different PDF's. They all download fine and open correctly when downloading from a Mac computer. They even download and open fine from a Mobile Phone. However my client is getting an error over and over again. I have tested it out and this is what I have come up with.
Error:
Adobe Reader could not open 'filename.pdf'" because it is either not a supported file type or because the file has been corrupted (for example, it was sent as an email attachment and wasn't correctly decoded)
I have resaved the PDF's to be compatible with Reader 6.
Works fine with
All Mac's using either Firefox, Chrome or Safari using Pro and Reader
iPhone downloads using iBook
PC's when downloading from Firefox viewing in Reader 9
PC's when downloading from IE 6.0 view on Reader 8
Error Message When
PC when downloading from IE 7 viewing on Reeder 9
PC when downloading from IE 8 viewing on Reader 9
Here goes the URL when the files resides.
Please help. I can not find a solution.

Hi i have solved the ie bug creating the pdf phisically, this is the code i use:
$hostname = "XXXXXX";
$database = "XXXXX";
$username = "XXXXX";
$password = "XXXXXX";
$db = mysql_pconnect($hostname, $username, $password) or trigger_error(mysql_error(),E_USER_ERROR);
mysql_select_db($database, $db);
$query_rs_docs = "SELECT * FROM doc WHERE doc_name='".$_GET['doc_name']."'";
$rs_docs = mysql_query($query_rs_docs, $db) or die(mysql_error());
$row_rs_docs = mysql_fetch_assoc($rs_docs);
$totalRows_rs_docs = mysql_num_rows($rs_docs);
$t_pdf = fopen("/path to doc folder/doc/".$row_rs_docs['doc_name'], "w+");
fwrite($t_pdf, $row_rs_docs['doc_file']);
fclose($t_pdf);
header('Location: http://www.portalesardegna.com/doc/'.$row_rs_docs['doc_name']);
the db table (doc_name must contain the .pdf extension):
CREATE TABLE IF NOT EXISTS `doc` (
`doc_ID` int(10) NOT NULL auto_increment,
`doc_name` varchar(255) NOT NULL,
`doc_file` longblob NOT NULL
PRIMARY KEY (`doc_ID`)
) ENGINE=MyISAM;
Message was edited by: Portale Sardegna

I need to find a phone number of someone who called me over a week ago and it is not listed in my phone anymore. How can I find this number?

It's a customer's number and they called too long ago to still be listed in my phone. Can I get this information online somewhere?

B33, thanks for helping us support wsoffice with information regarding the various voice mail options that we provide. Click http://www.verizonwireless.com/support/information/voicemail_comparison.html to compare the voice mail feature and choose the best one that fits your needs.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Using Maverick, error message: Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

Receiving error message using current Maverick version: "Adobe Reader could not open '***.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).". Is fix the same as on previous OS versions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Missing Email and Phone Type in MS Visual Studio 2013 Community Edition Lightswith HTML Client Project

I was wondering if the Email and Phone types are only available to VS 2013 professional (or any other paid versions).
Can someone please shed light on this? I'm kind of stuck on the tutorials of Beth Massi.
Thanks in advanced!

HI Jaybee lsip,
Welcome to Lightswitch forum.
We can use Email and Phone types in Visual Studio Lightswitch 2013/2012, etc. If you got error message using Email and Phone types, you need check whether this issue is related to your VS environment, and repair your VS first, perhaps it will
help you to fix it.
Please let me know if there is anything that I can do to help.
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

UC520 List of supported phone types

Similar Messages

Maybe you are looking for