Uc520 - outbound calls take a long time

hi,
got my uc520 working, inbound calls work rigth away but outbound calls take a long time...
so when I run any sort of debug on my uc520, I dial a number let's say 9 555 555 5555 it will take about 15 seconds before anything shows up in my debugs.
so it does work but calling out not sure what happens takes a long time.
this is all with a sip provider.
I know it,s not the sip provider because as I said before any debug information is showed on my console between me dialing the number and hitting DIAL and the time anything shows up it takes about 15 seconds.
ideas?

so here is the test I did today,
my UC520 at home is behind my isp's (linksys type device) so my uc520 gets a 192.168.x.x
so behind my own isp it takes a good 20 seconds before the phone I'm calling rings.
I took my device and put it in my dad's house where my uc520 gets the public ip, dhcp but still I get the public ip.
it takes about 5 seconds which is normal.
any idea why in my house before any debug starts showing up in my terminal why it takes about 15...20 seconds and when the uc has the public ip it takes about 3 to 5 seconds?
I just run
debug ccsip messages.
my dad,s internet I get the public ip it after 3 seconds debug information shows up.
on my internet it takes about 20 seconds before any debug information shows up and my uc gets a 192.168.x.x from the providers modem/router device.
thanks

Similar Messages

  • A database procedure call takes a long time but user is okay with that

    Is there a way of showing to the user a progress bar type WITHOUT using javabeans to indicate the status of a database process ? I think there is a timer of some description, can anyone post sample code please.
    The user is fine that a process will can take up to 10 minutes to run. (it is a batch processing routine and involves many other procedures, etc in the database to run)
    I am running:
    Forms [32 Bit] Version 10.1.2.3.0 (Production)
    Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
    With the Partitioning and Data Mining options
    Oracle Toolkit Version 10.1.2.0.2 (Production)
    PL/SQL Version 10.1.0.5.0 (Production)
    Oracle Procedure Builder V10.1.2.3.0 - Production
    PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
    Oracle Query Builder 10.1.2.3.0 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
    Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE     10.1.0.5.0     Production

    Create an item which width is 100%, change the visual properties to show it like a bar.
    Show it on separate window with a separate canvas.
    Create a procedure which:
    - Change the length of your bar:
    SET_ITEM_PROPERTY('<Your bar item>', WIDTH, <Width of your bar item> * <Percent of the bar to show> / 100);
    - shows the window in front
    SHOW_WINDOW('<Your window>');
    - hide the window if <Percent of the bar to show> is greater or equal 100
    HIDE_WINDOW('<Your window>');

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Messages take a long time to open after EHP1 upgrade

    hi,
    We have recently upgraded our PI 7.0 to EHP1 and we find that it takes unusually long time in sxmb_moni to open up(view) messages, has anyone seen this before .
    Thank you
    Jonu Joy

    I'd suggest tracing system activity when this long runtime issue occurs, so you could know where this time is spent (db access ? etc) ... a plain SM50 call in parallel could do the trick if runtime is long enough !
    Chris

  • Snow Leopard 10.6.2 takes a long time to run 'X11.app' (with system log)

    Hello everyone, English is not my mother tongue so may not be exactly correct, sorry about that.
    Background:
    I have a MacBook White (13-inch, Mid 2009) that isn't unibody, and was running Leopard 10.5.
    I did a clean installation and now Snow Leopard 10.6.2, with iLife, iWork, and many many apps.
    I am the only one who will use the Mac and my user account is as the 'admin'.
    I previously had a problem concerning X11 too:
    http://discussions.apple.com/thread.jspa?threadID=2343732
    *What I've done:*
    (1) rename my HD to 'Michaels_Home' under 'Get Info' from Finder (I can't rename in Disk Utility though)
    (2) press return (enter)
    (3) change my home folder path to the '/Volumes/Michaels_Home/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
    (4) restart
    (5) log in and open X11
    (6) problem solved!!
    ==========
    *BUT NOW* I have a problem after:
    (1) log in as the root user, and use command +ditto -V xyz xyz+ to copy my home folder from '/Volumes/Michaels_Home/Users/Michael' to '/Users>Michael'
    (2) change my home folder path to the '/Users/Michael' (http://eshop.macsales.com/Reviews/Framework.cfm?page=Tips/relocate3/relocate3.ht ml)
    (3) use the Mac OS X Snow Leopard USD$29 disc to boot my Mac up
    (4) delete the 'Michaels_Home' partition (I had 3 partitions: (1) Macintosh HD (2) Michaels_Home (3) Windows XP Professional)
    (5) resize the 'Macintosh HD' partition
    (6) boot from Macintosh HD
    (7) find that there's a problem about X11
    _The problem:_
    it takes a *long time* for X11 to start.
    When I try to open the 'X11.app', the X11 icon begins jumping on the Dock, but nothing happens.
    Jumping and jumping... finally, it doesn't jump any more, with just the X11 icon on the dock.
    What's more, there is no white dot under the icon, which means the app isn't running at the moment.
    I right-clicked the icon, it shows me 'application not responding'.
    So, I open the *Activity Monitor*, and I can see there are 3 apps related to X11 are running:
    (1) X11
    (2) X11.bin
    (3) xauth
    *At the moment now, if you would wait for about 1.5 min., X11 will open.*
    Please see below for the system log (from 'FREEZING' to 'WORKING')
    ==========
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: main(): argc=2
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /Applications/Utilities/X11.app/Contents/MacOS/X11.bin
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -psn0139298
    Mar 1 00:42:10 n219073058253 [0x0-0x22022].org.x.X11[327]: Waiting for startup parameters via Mach IPC.
    Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Scanning user font directories to generate X11 font caches
    Mar 1 00:42:10 n219073058253 org.x.startx[335]: font_cache: Updating FC cache
    Mar 1 00:42:10 n219073058253 org.x.privileged_startx[344]: font_cache: Scanning system font directories to generate X11 font caches
    Mar 1 00:42:10 n219073058253 defaults[370]: \nThe domain/default pair of (org.x.X11, dpi) does not exist
    Mar 1 00:42:12 n219073058253 org.x.privileged_startx[344]: font_cache: Updating FC cache
    Mar 1 00:42:13 n219073058253 org.x.startx[335]: font_cache: Done
    Mar 1 00:42:14 n219073058253 org.x.privileged_startx[344]: font_cache: Done
    Mar 1 00:42:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.serverauth.335
    Mar 1 00:42:51 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    Mar 1 00:43:31: --- last message repeated 1 time ---
    Mar 1 00:43:31 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    Mar 1 00:43:51: --- last message repeated 1 time ---
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Listening on socket for fd handoff: (4) /var/tmp/tmp.0.9OYerf
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Thread created for handoff. Returning success to tell caller to connect and push the fd.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Received new $DISPLAY fd: 6 ... sleeping to allow xinitrc to catchup.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: dostart_x11server(): argc=6
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /usr/X11/bin/X
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] =
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = -nolisten
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[3] = tcp
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[4] = -auth
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[5] = /Users/Michael/.serverauth.335
    Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Handoff connection established (try 1 of 5) on fd 6, "/var/tmp/tmp.0.9OYerf". Sending message.
    Mar 1 00:43:51 n219073058253 org.x.startx[335]: Xquartz: Message sent. Closing handoff fd.
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Xquartz starting:
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: X.Org X Server 1.4.2-apple45
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: Build Date: 20090705
    Mar 1 00:43:51 n219073058253 [0x0-0x22022].org.x.X11[327]: (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base
    Mar 1 00:43:54: --- last message repeated 1 time ---
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app Handing off fd to server thread via DarwinListenOnOpenFD(6)
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: DarwinListenOnOpenFD: 6
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: Calling ListenOnOpenFD() for new fd: 6
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: X11.app: Launching /usr/X11/bin/xterm:
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[0] = /bin/sh
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[1] = -c
    Mar 1 00:43:54 n219073058253 [0x0-0x22022].org.x.X11[327]: argv[2] = /usr/X11/bin/xterm
    ==========
    I quit the X11:
    ==========
    Mar 1 00:45:45 n219073058253 [0x0-0x22022].org.x.X11[327]: Quitting Xquartz...
    Mar 1 00:45:45 n219073058253 org.x.startx[335]: /usr/X11/bin/xinit: connection to X server lost.
    Mar 1 00:45:45 n219073058253 org.x.startx[335]: waiting for X server to shut down
    ==========
    AFTER quitting X11, I can see something related X11 is stilling running:
    ==========
    Mar 1 00:46:06 n219073058253 org.x.startx[335]: xauth: timeout in locking authority file /Users/Michael/.Xauthority
    ==========
    So what actually causes this problem?
    Thanks in advance!

    It turns out that there's something wrong about permissions.
    Here's the fix:
    (1) log in as the +root user+
    (2) type +chown -R Michael:staff ~Michael+
    (3) log out the +root user+
    (4) log in your account
    (5) done!
    Hope this thread will help those who encounter the same problem as me!

  • Creation of Transfer Order takes a long time and finally throws spool error

    Hi,
    I create Sales Order of type OR. I do delivery successfully. But when i proceed to create Transfer Order, it takes painfully long time and finally after painful 30 mins or so, it throws a error message, 'Error in spool call' with a blank page. I click on save icon and transfer order is created.
    But the creation takes very long time. I checked SP01 and there are no requests.
    Any suggestions will be rewarded.
    Regards,
    Mangesh

    Dear,
              Kindly contact your Basis team it will help you.
             After error please take the screen short of SU53 and give to basis team.
    May be it will help you.
    Regards,
    Sandip

  • I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

    I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
    is there a way to stop it in the middle so it does not go through the whole process

    It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

  • Plot initialization takes a long time

    Hello,
    I've attached a vi that is a copy of some code I'm using in my application.  The behavior I want is for the strip chart to scroll from right to left.  The newest data will be added to the right side of the screen and scroll left, like a strip chart.  For this reason, the right side time is shown as 0 and the left side is shown as negative time, taken from the seconds to graph control.  It works just fine in my application with two exceptions.  When I set seconds to graph to a low number, say 1 second, all is well.  When I set it to a high number, like 100 seconds, the initialization takes a long time.  Based on this code, I've narrowed it down to the graph init time, and not the init of the arrays.  Is there a faster way to accomplish this same behaviour?  In addition, does anyone know why when the seconds to graph control is set to numbers greater than 30, the left side of the x-axis holds at -30, but for numbers less than 30, the left side shows that number?  It's supposed to show a negative of whatever the seconds to graph says.
    Thanks.
    Attachments:
    diagostic.vi ‏1246 KB

    Dennis,
    Thanks for the call about the marker values.  When I received the solution from NI, I just copied it over and it worked.  I never dug into how it worked.  I just removed the array to the marker values and it inits quickly now.  Thanks.  As for the history, best I can remember, the original chart drew and compressed the plot as data were added.  I wanted a chart of fixed width that would init to nothing drawn, and have the drawing itself scroll across from right to left as the time ticked off.  It's working great now.  Thanks.
    Rick

  • In attempting a slide show in PSE 08 w/275 pics, PSE warns .. take a long time, sends me to Bridge.

    I am attempting to create my first slide show in PSE, version 08.  I have a Mac OS with 199.03 GB available.  I have selected and organized 275 photos.  When I select "PDF Slide Show" under the CREATE option, I am warned twice that it will take a long time.  Then I am sent over to Bridge where these photos appear, all organized.   Nothing happens.  Is there something going on in PSE that takes a long time and I cannot see?

    You can't do any of that in the mac version even if you have 2 photos. The so-called slideshow is basically a multipage pdf document that displays transitions as it turns pages. That's it.
    EDIT By "turns pages " I mean "changes from one page to the next".

  • Hi i  insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?

    Hi i  insttalled the free trial 3O days MacScan on OsX10.5 is it normal that for full scaning it takes so long time more even than one day?! on the other hand this application hasn't any uninstaller on image disc ,so how can i uninstal it from my hard?Thanks

    Get rid of the tracking cookies. They are used to profile and track your browsing history. While they are privacy invading, by calling them spyware, MacScan is being a little dramatic in trying to sell you its crap. And in the future, for whatever browser you use, don't allow third-party cookies.
    To prevent tracking, get Ghostery. In addition to having Ghostery and forbidding third-party cookies, I clear out all cookies from one browsing session to another. If you always do that, you won't have any tracking cookies to worry about, so you won't need MacScan to find them for you. Btw, MacScan finds the tracking cookies in the first few minutes of scanning; if you want to use it for that, then that's all the time you need to run it for. But, as I said, you won't have any tracking cookies around if you just remove all cookies and don't allow third-party cookies. As soon as you visit a site that needs them, you'll just get new ones. No problem.
    Read all about cookies here.
    http://en.wikipedia.org/wiki/HTTP_cookie

  • Discoverer take a long time executing reports

    Hi
    I have installed Discoverer with Application Server 10g R2 (both). I create my reports from a table but when i want to update my information in the Oracle Portal (executing a discoverer report with parameters) but it take a long time (up 2 or 3 minutes) the query is on one fact table with 4 or 5 FK.
    Somebody has an idea why?
    I have 2 server (one to OAS and another for Discoverer) the first with 1 GB RAM and the 2nd with 2 GB.
    i dont believe that the problem is with my database.
    Thank's a lot

    Hello,
    The issue is the reports are still looking for the original server because that server name is saved in the report file. You'll have to open each report up and do a Set Location to the new report. You'll need the same version of the REport Designer the reports were created in.
    I suggest to call Dynamics and ask them how to update the reports.
    Thank you
    Don

  • Pull large amounts of data using odata, client API and so takes a long time in project server 2013

    We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
    In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
    As long as we don't add a field in the table. So how's one to do this with creating a view?

    Hello,
    If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
    https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
    It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS |
    MVP | Downloads

  • Patch R12 on T4 engine takes a long time

    Hi All,
    I have patched R12 64bit (patch 8919491) on T4-1 machine takes a long time (not completed after 40 hours).
    ram 16, sga 2g, another init.ora I set default, idle cpu concumption 99%
    message alert.log : Incremental checkpoint up to RBA [0x3.1afee1.0], current log tail at RBA [0x3.1aff77.0]
    please help

    Hi Husein,
    Thank you for your help.
    I run adpatch as instruction on Readme.txt 8919491.
    here are status 16 of workers:
    96 -rw-r--r-- 1 oradev dba 48423 May 9 07:06 adwork004.log
    134 -rw-r--r-- 1 oradev dba 67870 May 9 07:04 adwork007.log
    148 -rw-r--r-- 1 oradev dba 74786 May 9 07:04 adwork005.log
    124 -rw-r--r-- 1 oradev dba 63411 May 9 07:04 adwork008.log
    54 -rw-r--r-- 1 oradev dba 27221 May 8 21:00 adwork002.log
    162 -rw-r--r-- 1 oradev dba 82239 May 8 21:00 adwork003.log
    224 -rw-r--r-- 1 oradev dba 102927 May 8 21:00 adwork001.log
    16 -rw-r--r-- 1 oradev dba 7809 May 8 21:00 adwork012.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork014.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork013.log
    20 -rw-r--r-- 1 oradev dba 9746 May 8 21:00 adwork011.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork015.log
    20 -rw-r--r-- 1 oradev dba 10140 May 8 21:00 adwork010.log
    68 -rw-r--r-- 1 oradev dba 34358 May 8 21:00 adwork006.log
    22 -rw-r--r-- 1 oradev dba 10493 May 8 21:00 adwork009.log
    14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork016.log
    I'll send you 2 workers status are adwork004.log and adwork016.log:
    1. adwork004.log :
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Index WF_USER_ROLE_ASSIGNMENTS_N3 exists under APPLSYS schema.
    Checking for differences
    Column_name and Uniqueness match for both file and DB Indexes
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Index WF_USER_ROLE_ASSIGNMENTS_N4 does not exist in APPLSYS.
    Skipping the creation of index WF_USER_ROLE_ASSIGNMENTS_N4 in current mode.
    Index WF_USER_ROLE_ASSIGNMENTS_U1 exists under APPLSYS schema.
    Checking for differences
    Column_name and Uniqueness match for both file and DB Indexes
    The Index in xdf-file and db match perfectly. No alteration necessary.
    Performing AOL meta data updates
    Attempting to update fnd tablespace meta data
    Upload of Fnd_Object_Tablespaces is successful
    AOL metadata updated successfully.
    ==========================================================
    Done calling the utility function. Return Code = [0] TimeStamp = [Wed May 08 21:01:01 WIT 2013]
    Updating task with status 0
    Time when worker completed job: Wed May 08 2013 21:01:01
    AdjavaWorker has reached the maximum wait timeout specified( 36000000 ). So Exiting.
    2. adwork016.log :
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    Temporarily resetting CLASSPATH to:
    "/u01/oracle/oradev/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/oracle/oradev/apps/apps_st/comn/java/lib/appsborg.zip:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle/oradev/apps/apps_st/comn/java/classes"
    Calling /u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
    Exception in thread "main" java.sql.SQLException: The Network Adapter could not establish the connection
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    at java.sql.DriverManager.getConnection(DriverManager.java:582)
    at java.sql.DriverManager.getConnection(DriverManager.java:185)
    at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
    at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
    Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
    at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
    at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
    at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
    at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
    It's mean my machine is not enought for 16 workers ?
    please help

  • Problem description: My  macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click-  EtreCheck

    My computer
    Problem description:
    My  macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
    EtreCheck version: 2.1.8 (121)
    Report generated 31 de março de 2015 18:29:15 BRT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 250
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320,07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Stickies    Application  (/Applications/Stickies.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        npsf_cef: Version: sf 3.3.1.1 [Click for support]
        Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
        DivX HiQ
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.86 GB
            Total number of backups: 60
            Oldest backup: 2012-07-15 01:16:54 +0000
            Last backup: 2015-03-29 19:28:06 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            97%    rapportd
             3%    WindowServer
             1%    mds
             0%    fseventsd
             0%    distnoted
    Top Processes by Memory: ℹ️
        155 MB    Safari
        120 MB    Finder
        86 MB    rapportd
        86 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        12.56 GB    Free RAM
        2.53 GB    Active RAM
        428 MB    Inactive RAM
        1.66 GB    Wired RAM
        1.04 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 06:00:15 PM    Self test - passed
        Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
        Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
        Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
        Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
        Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
        Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
        Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
        Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

    My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

    noeleeeen,
    so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
    Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
    I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
    Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

Maybe you are looking for

  • Short dump when running EWA report

    Dear Expert, I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO What happened?     Error in the ABAP Application Program     The current ABAP program "CL_GUI_GP=====================CP" had to be      terminated because it has

  • My ipod touch is not syncing properly.

    My Ipod touch is not syncing properly.  I download podcasts and it will not allow me to delete some shows after they have been listened to.  It is a neverending cycle of deleting unwanted podcast episodes from itunes on the computer, plugging in my i

  • Can i put images on a button

    Hi i have some omages which i need to put on a button can i do that in java. I cannot use swings cause i am using java 1.1.7. can i do something using awt. Is there ImageButton in jdk 1.1.7 ??? Please help me in this. Please post a sample code if any

  • Cannot open links in verizon & aol email. what do I have to do? get Invalid url

    I cannot open some links in email on verizon email, aol email however I can open links in same email sent to my yahoo address, while using the same browser. What could be the problem?

  • Iphone missing from itunes/xcode after OS upgrade

    Hi all, I've just upgraded my os from 10.5 to 10.6.3, everything went fine during the installation, it also updated my mac firmware without errors. But now, my mac does not recognize my iphone - I'm using the same iphone, cable, usb socket as before,