UC540 Phones not pulling down DNs

Hello all,
I have a UC540 where the phones are registering but not pulling doown the config it seems. They are showing the UC as the TFTP server. ANy idea where to start?
All replies rated!

Hi Scott,
Further to what Alex has requested, can you please provide us a "debug tftp event"?
I would love to see where it is failing to see if we can resolve this quickly.
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **

Similar Messages

Phone will not pull down OTA Update

My Phone will not pull down OTA Update.
Please help

PS - someone on the MOTO forum suggested to make sure you don't have a setting set that prevents the OTA update:
Menu>Settings>Data Manager>Data delivery>Social applications
Make sure that the Sync over Wi-Fi only setting is NOT checked. If it is than uncheck it and try System updates again.

Can not pull down notification bar in PORTRAIT mode

I bought K900 from flipkart.com 2 months ago and everything was working ok. Now suddenly I have a problem with the notification bar; I can not pull down my notification bar. This problem started when I was using "GOOGLE+ app" and suddenly the notification bar automatically got pulled down; from that point I am unable to pull down my notification bar down. I have tried following ->
1) Disable google+ app, uninstall google+ uppdates
2) Restart phone normally and ALSO restarting the phone in safe mode.
3) clear cache using an app "App managet" and also clear ALL cache using the recovery (by pressing vol down and power button).
4) Factory reset
5) tried another lauchers : LauncherPro, Atom launcher
Has anyone faced this problem? There is an app on playstore "Drop down" which pulls down the notification bar. The touch sensors and also the display is working fine in the area of the notification bar (BUT I can not pull down by using fingers/swipe-down action). When the screen is in LANDSCAPE mode i.e. while playing a video using MXPlayer; the notification bar CAN BE PULLED DOWN, BUT CAN NOT in PORTRAIT mode.
I have also read on the internet that some people having samsung galaxy s3/s4 have also faced the same problem.
Can anybody suggest me to do something? Are my screen pixels/touch sensors dead on the top most row??
My K900 is stock(non-rooted) and has android 4.2.1; I have not updated my phone to the latest firmware.

I will leave this answer to my original question.
I called Apple and was completely disappointed with their answer. They indicated that they would not answer such a question, since they deemed it to be "outside of the scope of Apple support" since my question was deemed "not a consumer-oriented
question."
So yesterday, I took my Samsung SyncMaster 204T monitor to the local Apple retailer to try it out on an actual system. I specifically tried it out on the 24" iMac with the nVidia 7300GT graphics card, since that is the system I was interested in.
It turned out that this monitor works beautifully in portrait mode with the above system using Tiger 10.4.8.
So, I went and bought it!!

Z2 Status bar not pulling down

Hi everyone, hoping someone can help.
As the subject says - the status/notification bar (or whatever its called) is not 'pulling down'. I've switched phone off and on a few times. Pressed the little red button next to sim card slot....nothing is working.
Any ideas/solutions appreciated.
Many thanks

I have the same probleme with my new xperia z2 I ve just bought it 5 days ago and the notification /status bar isnot sliding down I even reinstalled the software using sus but nothing helped. this is the worst phone I ve evwer seen in just 5 days I have experienced water inside the camera lens beacuse of the gaps and ridiculous heat issue in each task and the camera really sucked i cant do anything beacuse of heating really disappointed from sony I had xperia p and it was much better than this s**t.excuse me for my manners but I am really mad.

Windows 7 PC's not pulling down updates as per GPO

Good Morning All,
I would really appreciate some help.
I am seeing that most of my Windows 7 Client PC's are not pulling down updates from our Windows 2012 with WSUS Version: 6.2.9200.16384.
All PC's are in a security group called User_Windows-7 and have a the WSUS GPO linked to that, below are my WSUS settings:
As you can see I have specified the WSUS server for the clients to see VIA IP with the port number for WSUS (I read this was recommended - Can this be confirmed)
Many thanks for anyone reading and contributing.

Event ID 364
Content file download failed. Reason: Value does not fall within the expected range.
Apparently something is not allowing traffic through. How did you determine it's not your proxy server?
Destination File: C:\Program Files\Update Services\WsusContent\E2\FADD04672988799783BBE6700E429C138454C3E2.cab.
Also... why is the content store in the %ProgramFiles% folder tree?
Regarding this comment in an earlier post:
(This is the first time I've installed WSUS so wasn't 100% on how it worked).
May I be so impertinent as to suggest that it might be worth your while to open up the
product documentation and actually learn how the product works?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Some client systems not pulling down updates

Hi,
I recently pushed out the all the March Patch Tuesday updates and I've got around 11 systems that are reporting as compliant when I review the status of the deployment, but are systems that haven't actually pulled down or installed the updates from the deployment.
Strangely the systems show up as Active in the SCCM 2012 console and have current (within the last 4 hours or so) active times. So it seems the SCCM client components are working correctly.
The thing all these systems appear to have in common is that in the WindowsUpdate.log I see the following lines:
2015-03-23 04:32:32:148 2216 16d8 COMAPI ---------
2015-03-23 04:32:32:148 2216 16d8 COMAPI -- END -- COMAPI: Search [ClientId = CcmExec]
2015-03-23 04:32:32:148 2216 16d8 COMAPI -------------
2015-03-23 04:32:32:959 2216 a18 COMAPI WARNING: ISusInternal::GetUpdateMetadata2 failed, hr=8007000E
Reviewing the WindowsUpdate.log I can see the CCMExec process talking to my SCCM 2012 server but then I get the error above and no updates appear to get pulled down.
I've tried rebooting the systems to see if that resolves the issue but it doesn't. Also what is strange is that these systems have all been working fine in the past. So something appears to have gotten messed up but I'm not sure what?
Any ideas?
Thanks in advance,
Nick

Just to update - I followed the steps to resolve the problem that were mentioned in the following thread
https://social.technet.microsoft.com/Forums/en-US/cf8fbe28-714d-49d3-b2ce-5cc5f6f79c63/some-clients-not-updating-reporting-compliant-hr8007000e-error-in-windowsupdatelog?forum=configmanagersecurity
Namely I did:
Clean up WSUS - I had over 18000 expired/unneeded updates in my WSUS server. I used the SQL script from the following post:
http://blog.coretech.dk/kea/house-of-cardsthe-configmgr-software-update-point-and-wsus/
It took over two days to delete all the updates in batches of 2000
I also plan to add a weekly scheduled job with the WSUS Server Cleanup process PowerShell script they provide to keep my WSUS server clean
Index the WSUS database - I used the SQL Script provided in the following post
https://gallery.technet.microsoft.com/ScriptCenter/6f8cde49-5c52-4abd-9820-f1d270ddea61/
I also plan to add a scheduled job to run this weekly
After I made these changes my Windows 7 x86 clients that hadn't pulled down the latest March updates pulled them down.
I also ran the batch file they provided
Net stop wuauserv
Sc config wuauserv type= own
Net start wuauserv
Just in case on these machines.
Thanks for the help on this one.

Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

Hi,
I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily.
I just installed Office 2013 on this system and have activated it as necessary. The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM. I have other systems with
Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
What can I check to try and determine what the problem is?
Thanks in advance,
Nick

Yes, the 8.1 system is a member of collection where the update deployment is targeted.
Are there any specific logs I should check in the client? If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Premiere elements 11 - project assets menu does not pull down - I can't see what media I have added.

HI, When I press the arrow for projects assets, I cannot see any assets. Actually, I cannot seem to add any via the add Media option in the expert view, but, if I use the quick view I can drag and drop. Please help. While I hope it is something simple, I am willing to reinstall or upgrade. Please advise. Thanks!!!!

swope1
What computer operating system is your Premiere Elements 11 running on?
Does the problem exist with and without the antivirus and firewall(s) disabled?
I would not move to Premiere Elements 12 or 13 just yet.
How long have you been working with the program without the problem from the day of purchase until now?
Are you saying that you cannot use Add Media (click on triangle and list does not drop down) as well as use
Project Assets (will not open)? If both is the case, I would encourage you to do
a. Deactivate the program in an opened project's Help Menu/Update - then close out of there.
b. Uninstall the program using the usual Control Panel way
c. Do a free ccleaner run through (regular and registry cleaner parts)
CCleaner - Download
d. Reinstall the program with antivirus and firewall(s) disabled.
Please let us know the results. Then we can decide what next.
Thank you.
ATR

POP UP menu with image not pull down

I'm new to fireworks. I've looked at tutorials, but it seems
all the pop up menu features are for pull down menus. I want to
press the button and have a blank ( separate window 360x 303 pixals
) pop up with a jpeg image in it. How do I do this?

katveze,
What you are wanting to do is called Disjointed Rollovers.
Here is a
great tutorial to point you in the right direction:
http://www.communitymx.com/content/article.cfm?cid=E11E8
alex
katveze wrote:
> I'm new to fireworks. I've looked at tutorials, but it
seems all the pop up
> menu features are for pull down menus. I want to press
the button and have a
> blank ( separate window 360x 303 pixals ) pop up with a
jpeg image in it. How
> do I do this?
>

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like t

I have Adobe CS. Upgraded my computer to Windows 7. Installed CS but I can't activate Photoshop due to the online/phone activation being pulled down. Now the 30 days has expired. Tried to follow directions to install CS2 but no luck. I would really like to speak with someone at Adobe to get it working again. THanks

If you would like to speak with someone at Adobe you will need to cvontact them directly by chat or phone.
Here is a link to a page with options to help make contact:
http://www.adobe.com/support/download-install/supportinfo/

HT1347 disc is not showing up in the pull down menu

When I insert a disc to import into iTunes 11.1, it does not show up in the iTunes pull down menu to import the files. Why? You have made import and use of iTunes very difficult by removing the side menu for adding folders and such for easy file transfer between iPhones and iPads. Please consider giving us some easier menus

Hi leofromcorinth,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
To keep the iTunes menus active, change the setting by selecting the Menu icon in the upper-left, and then selecting Show Menu Bar.
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
In iTunes 11 you have the option to turn the Sidebar and the Status Bar on or off; they are off by default. To do this in the menus, go to:
Show Sidebar - Choose View > Show Sidebar (this feature will display iTunes features on the left side of the application including Library, Store, Shared, Genius, and Playlists).
Show Status Bar - Choose View > Show Status Bar (this feature will conveniently display the number of items and playback time for a category, for example, music or movies).
Cheers,
- Judy

Family shared calendar events not showing in Today pull-down

iPhone 5s
IOS 8.0.2
When I pull down the Today/Notification screen, the calendar section will not show any events that are entered in the Family Shared calendar. Calendar events in other calendars show up fine. Is this a configurable option?

I should fix a mistake in the original post. Where I said, "And when tomorrow comes around, those events don't show in the Calendar app," it should be, "And when tomorrow comes around, those events don't show in the Calendar section of notification centre."

The internet updated without me knowing and now i can not pull tabs down to make a new window or change the order of tabs and i can't find out how to get back

my mozilla updated without acknowledging me first. I open it and I come to find out I can not move the tabs over to the right or the left one spot or two spots they just won't move unless I close them. I use to be able to move there anywhere i wanted or pull down and it became it's own window. Now I have to right click to make it a new window and then I can't drag and drop other tabs into it to make a window with several tabs. How do I get this back to the way it was before?

In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled ''(Flash and other plugins still run)''
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?
''Note: on the new menu, Help is the ? icon toward the bottom.''

My bookmark pull down menu doesn't offer " manage bookmarks". In all the support Ican find this is how to edit bookmarks. How do I find the manage link if it's not in teh pulldown menu?

Question
My bookmark pull down menu doesn't offer " manage bookmarks". In all the support I can find this is how to edit bookmarks. How do I find the manage link if it's not in the pull-down menu?

In Firefox 4, "Organize Bookmarks" has been changed to "Show All Bookmarks" to open the Library window.

My imessage will not activate. i have talked to apple twice, hard reset my phone twice, changed my DNS to 8.8.8.8, checked my time zone, NOTHING

my imessage will not activate. i have talked to apple twice, hard reset my phone twice, changed my DNS to 8.8.8.8, checked my time zone, NOTHING

Thanks for sharing that with us. Frustrating, huh?

UC540 Phones not pulling down DNs

Similar Messages

Maybe you are looking for