UC560 / 8.6.2 - how to remotely reboot phones?

After upgrading our UC560 from 8.2.0 to the latest 8.6.2 software pack, a whole bunch of phones have not yet completed the phone load update.
Apparently the UC560 gets overwhelmed by having so many phones try to contact it all at once to upgrade, and they haven't all updated yet.
In the original Cisco Unity Express Administration software on the UC560 from 2010, there was a section in the web-based managment titled "Phones" which had an option to select phones and remotely reboot them.
I cannot find a section titled "Phones" in the new Unity Express 8.6.5 web-based management, in order to remotely reboot them.
Also, I cannot find this remote reboot option in the latest Configuration Assistant 3.2(3).
So is it just no longer possible to remotely reboot phones via the web-based Unity Express Administration?
Am I forced to walk around to every phone to manually unplug the network cable so that it resets and updates?

On the older software versions, the CUE GUI was integrated with the CME GUI. In the newer versions of CUE 8.x and later, this is not possible. You need to go to the CME GUI directly http://ipaddress/ccme.html, there you'll find the Phones submenu, Please make sure you have the proper settings to enable the GUI:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html
HTH
Jorge Armijo
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Iphone is disabled how can i reboot phone to rest password?

iphone is disabled how can i reboot phone to reset password?

If you cannot remember the passcode, you will need to Restore the device...
1) Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

Help me! How do i reboot phone after root?

I Just rooted my phone today. I'm using an xperia mini st15i and i've used the ray-kernel for my phone since there was so seperate one for my phone. After long days i rooted my phone properly(it showed success on runme.bat) but since then i haven't been able to switch on my phone. When i press the power button, it vibrates shortly ater which the device turns on and doesn't show the screen. It's switched on but nothing shows. The only way to switch off my phone is to try and take the battery out. Please need help!!!!
AAAAAAAAAA HELP ME?

Hey Francis,
Thanks for your time.. and my warranty was only for a year and its been a year and a half so better to root than to leave it as it is..
Anyways, i've fixed the problem. I reupdated my phone using Sony Update Service and I tried rooting again. I had to flash my custom kernel after rooting and in recovery mode. It's all fixed now thanks!

Remote reboot a PC from a MAC?

Is it possible and if so how can you reboot a windows 7 PC from a Mac OSX? Thanks.

from your remote desktop, open a windows command prompt and type
shutdown /r /t 0
for an immediate reboot

I was holding my i phone in my hand for a while and suddenly the screen is very large...what do i do??? how do i reboot???

I was holding my iphone in my hand for a while and suddenly the screen is gi-normous...what do I do??? how do I reboot???

to reboot you hold the power on/off button and the large home button together until you see the little apple logo.
However if you take three fingers together you can tap the screen back to its former size.
See article below.
My iPhone Icons Are Large. What's Happening?
Good Luck

How does Remote work with Apple TV?

How does Remote work with Apple TV?
1. Does Remote, "Play" the music that resides on your iPod Touch>Apple TV>Home Speakers.
OR
Does Remote "Control" the music that resides on Apple TV HD>Home Speakers.
(If so... say you have a iPod Touch that only holds 8GB's but your music collection on your Apple TV exceeds that amount.
Will Remote still "Control" the larger music collection on Apple TV or your computer?)
2. Will iPod Wifi work on a patio outside a home to control Apple TV inside the home?
thank you in advance, Tom

Remote is a way to control iTunes on either your computer or Apple TV using a WiFi connection. See this article for complete instructions.

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a brand new macbook pro that i was doing a data transfer from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again?

i have a brand new macbook pro that i was doing a data transfer via firewire from an old macbook, it got stopped/cable pulled out, now have spinning wheel of death that wont stop, how do i reboot/stop the wheel of death and start again? (this time il use time machine transfer)

Just power off the machine(s). Shut them down. Migration Assistant gets 'stuck' sometimes - best way to migrate really isn't over Firewire, though it will certainly work, but with both machines hardwired via Ethernet to the same router. You can use a TM backup, too, of course, provided that it's recent. Which is the best? Your choice. I've done it both ways and have a preference for MA, but TM restore can be a bit faster and less quarrelsome.
Clinton

How can I reboot my Ipad when I do not have access to the power off screen?

My device slide off my couch while in its cover. IT was working afterwards, for about 5 min. I sat it down while I took something out of the oven and was back maybe 5min. or so later. When i try to access it, all I see is a black screen. I cannot unlock it or even power off. How can I reboot it without the power off swipe ?

Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reboot/Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

How do I reboot my machine when it is flashing a question mark folder?

How do I reboot my machine when it is flashing a question mark folder?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
After the installer loads proceed through the installation procedure. If you are reinstalling Snow Leopard then your hard drive will not be erased.

Macbook air "no keyboards have been found ? how do I reboot?

no keyboard detected, how do I reboot or unlock?

Please make a Genius Appointment and take it in for service.

My App Store is not loading correctly, How do u reboot iPad?

How do I reboot my iPad. My App Store not loading correctly.

Hold the Sleep and Home button down (approximately 10 seconds) until you see the Apple logo.
Note: Data will not be affected.

The imac i have won't restart...the little thing just keeps spinning below the Apple icon...how do i reboot?

How can i reboot my imac when it won't open?

Work thru the steps at > Mac OS X: Gray screen appears during startup
Then if you get down to the section on starting up from your install disc without any success, jump to > OS X: About OS X Recovery

Windows Server 2008 - How to remotely manage account passwords?

I'm hoping to get direction on how to remotely manage 'user accounts' on Windows Server 2008 machines. The remote management would be from an automated perspective. For example, I have a custom application (maybe C#, Java, etc) that runs on one
server that makes connections to various 'Windows Server 2008' servers; and I want it to be able to do the following.
Query Windows Server 2008 box for full list of user accounts
Update password for user account
Lock account
Unlock account
Check policy information to find out when password may expire
I'm trying to find out what may already be available and running on Windows Server 2008 that I can take advantage to get this done programmatically.
-Wes

I agree with Mekac, the gallery should provide a lot of script of what you want to do.
Like ;
https://gallery.technet.microsoft.com/Password-Expiry-Email-177c3e27 - Password Expiry Email Notification.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

UC560 / 8.6.2 - how to remotely reboot phones?

Similar Messages

Maybe you are looking for