UC560 Daylight Saving Time

Hello,
We have a UC560. Once Daylight Saving Time (DST) was initiated we updated the time in CCA to the correct time - one hour ahead.
The problem: The messages being sent to our PC's when a caller leaves a voice message is 1 hour ahead of the actual time.
Please let us know if you may have a solution for this problem.
Thank you,
Dawn

Okay, I ran the update... Two problems here.
1. Now my calendar events between March 11 and March 31st 2007 are off by an hour (although they show the correct time when you open the event to view it).
It doesn't work to delete the event and create a new one... It still shows as the wrong time. the only way I found to fix the time problem is to set each event for the incorrect time zone (I'm in Pacific and have to set it to Arizona).
2. Each "all day event" I scheduled into my calendar show up the day before the actual event date, yet when I open the event they show the correct date. Example - If I scheduled an all day event for April 19th, it appears on my calendar on April 18th. Yet, when I open the event to view the details, it does say "April 19".
The only way I've found to fix the birthday events to the correct day is to delete each one and re-schedule.
I find this highly inconvenient and and huge time waster. My business depends on my calendar being accurrate and I don't have time to adjust hundreds of entries.
If other folks are having this issue, speak up. It would be great if other folks knew they should wait to install this until a fix is issued.
If it's just me... Well, I guess that *****.
What now?

Similar Messages

  • Cisco ISE 1.2 Daylight Saving time

    Does ISE support DST change?

    Time Zone = UTC is best practice for a distributed deployment.  Also, remember that if you change the time zone on an ISE, the database is deleted!  So, set this during initial setup.  BTW, for the Eastern Time Zone in the United States, use EST5EDT in order to allow for Daylight Saving Time.

  • Conversion mapping is losing time zone data during daylight saving time

    We have a problem with conversion of Calendars to timestamp with timezone for the last hour of Daylight Saving Time (e.g. 01:00 EDT - 01:59 EDT) where it is being interpreted as Standard Time which is in reality 60 minutes later.
    We've written a JUnit test case that runs directly against TopLink to avoid any issues with WAS and its connection pooling.
    The Calendar theDateTime comes from an object called TimeEntry which is mapped to a TIMESTAMP WITH TIMEZONE field using conversion mapping with Data Type TIMESTAMPTZ (oracle.sql) and Attribute Type Calendar (java.util).
    We are using:
    Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build Patch for Bugs 5145690 and 5156075)
    Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
    Oracle JDBC driver Version: 10.2.0.1.0
    platform=>Oracle9Platform
    Execute this Java:
    SimpleDateFormat format = new SimpleDateFormat("MM/dd/yyyy HH:mm z");
    TimeZone tzEasternRegion = TimeZone.getTimeZone("US/Eastern");
    Calendar theDateTime = Calendar.getInstance(tzEasternRegion);
    theDateTime.setTime(format.parse("10/29/2006 01:00 EDT"));
    Persist to the database and execute this SQL:
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides the following results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
    The wrong time zone is in the database. It should be EDT -4. Let's test the SQL that should be generated by TopLink. It should look like the following.
    Execute this SQL:
    UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 US/Eastern','mm/dd/yyyy HH24:MI TZR') WHERE (time_table_id=1)
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides the same results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EST -5
    Now, execute this SQL:
    UPDATE time_table SET the_date_time = TO_TIMESTAMP_TZ('10/29/2006 01:00 EDT US/Eastern','mm/dd/yyyy HH24:MI TZD TZR') WHERE (time_table_id=1)
    SELECT the_date_time, EXTRACT(TIMEZONE_REGION FROM the_date_time), EXTRACT(TIMEZONE_ABBR FROM the_date_time), EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    FROM time_table WHERE time_table_id=1
    This provides better results:
    THE_DATE_TIME EXTRACT(TIMEZONE_REGION FROM the_date_time) EXTRACT(TIMEZONE_ABBR FROM the_date_time) EXTRACT(TIMEZONE_HOUR FROM the_date_time)
    29-OCT-06 01.00.00.000000 AM US/EASTERN US/Eastern EDT -4
    The correct time zone is now in the database. Let's test reading this with the following Java:
    System.out.println("cal= " + theDateTime);
    System.out.println("date= " + theDateTime.getTime());
    System.out.println("millis= " + theDateTime.getTimeInMillis());
    System.out.println("zone= " + theDateTime.getTimeZone());
    This provides the following results:
    cal= java.util.GregorianCalendar[...]
    date= Sun Oct 29 01:00:00 EST 2006
    millis= 1162101600000
    zone= sun.util.calendar.ZoneInfo[id="US/Eastern",...]
    The TimeZone object is correct since we are using the US/Eastern regional time zone, but the millis are wrong which makes the time EST instead of EDT. The millis should be 1162098000000.
    The conversion from java.util.Calendar to TIMESTAMPTZ loses the actual offset when setting to a regional time zone. It can maintain this info by specifying it explicitly.
    The conversion from TIMSTAMPTZ to java.util.Calendar also loses the actual offset even if the correct offset is in the database.
    Has anyone else encountered this conversion problem? It appears to be a conversion problem in both directions. I know that the Calendar is lenient by default and will assume Standard Time if time is entered during the repeated 1 o'clock hour at the end of Daylight Saving Time, but the Calendars we are using are explicit in their time, so this would be classified as data corruption.
    Nik

    Opened an SR. Looks like there is a problem with conversion either in TopLink or in JDBC.

  • Daylight Saving Time Patch in 10.2.0.4

    Question:
    When you apply the 10.2.0.4 patch (linux-64 bit), does this patch include the daylight saving time patch that needed to be applied in earlier releases?

    I know that. I was looking for the readme file but my metalink account did not have access to it. I was hoping that the forum would fill in the gap for me.
    In this situation, I should have installed the 10.2.0.1 database, then the DST patch and then the 10.2.0.4. Instead, I got ahead of myself and did the 10.2.0.4 patch first. I was just wondering if the DST patch was included in the 10.2.0.4 by now. The good news is that I had my metalink updatred so I have access to the readme file now. I'm glad you knew the answer. Oh wait, you don't.

  • What is the best way to switch off Daylight Saving Time?

    What is the best way to switch off Daylight Saving Time for a DST enabled timezone?

    I've been looking through the related classes and can't seem to find a way to disable DST in any timezone. Probably because they couldn't think of a good reason to want to know what the non-DST time was during DST.
    However, you could easily compute the time without DST if that's what you need.

  • Brazil Daylight Saving Time Problem

    In Brazil, we enter the summer time and my blackberry 9800 torch automatically work, but when I synchronized with the playbook, some problems arose.
    The time in the menu setting is correct, as you can see in this image:
    But the wrong time remains the main screen:
    Does anyone have the same problem and knows how to fix it?
    tks,

    It did not work.
    It is indifferent to select manual or automatic, the problem persists.
    I'm in Brazil and with the correct time zone, but we are on daylight saving time.
    On the menu setting time and date, the time is right, however, in early 1 hour on application clock and and late 1 hour on the main screen.

  • Daylight saving time causes a date error on 01/APR

    morning dears,
    we are facing an issue related to Daylight saving time, as the following:
    at any page on the system that contains a calendar if we choose the date 01/04/2012 it generate an error...
    example on this error :
    on Leave Request page --> when choosing 01/04/2012 then clicking on calculate duration-->
    01/04/2012 is not a valid date. Please re-enter.
    any suggestions??

    dears any suggestions to solve the issue??
    have anyone faced this before?

  • Daylight Saving Time Changes in 2007 for USA

    Can anyone give me solution how to handle Daylight saving Time changes in 2007 in USA for JDK 1.3.x releases? We are using this due to some vendor dependency. We can�t upgrade to higher versions up to middle of the 2007. I would be thankful if somebody gets back to me.

    I have a similar issue where we cannot upgrade the jdk 1.1 without involving a lot of effort. If we keep the same old jdk, can someone tell me if use of Date and Calendar api will be impacted by the Daylight saving change.....provided the timezone is default and not explicitly set to EST. Also there isnt any timezone related buss logic.

  • Does BOXI 3.1 supports Daylight Saving Time (DST)?

    Hi ,
    Can any one tell me whether BOXI 3.1 supports Day Light Saving (DST), in case of scheduling reports?
    Thanks in Advance,
    Raghuveer.

    Hi Reddy,
    you can contact your vendor regarding this information ....
    You need to appy the Business Objects patch, you will need to apply the extended Daylight Saving Time (EDST) patches for your operating system and Java Virtual Machine and Application Servers in order for the Business Objects patches to take effect. Please contact your vendors for updated information.
    Regards
    KP

  • Appliaction Server 9.2 Daylight Saving Time Patch

    We have an older Oracle Application Server 9.2. Do I need to apply Daylight Saving Time Patch.
    Thanks in advance!
    Robert

    Support Note 417277.1 '2007 Daylight Saving Time Updates For Oracle Application Server'

  • CreateODBCDateTime monkeys with Daylight Saving Time!!

    If one uses CreateODBCDateTime to convert a date into the
    proper format for storing in a SQL Server database, and one runs
    this operation on a date between 0200 and 0300 on the day that
    Daylight Saving Time changes, the function will change the time
    forward or backward one hour. IT WILL DO THIS EVEN IF THE DATE YOU
    ARE STORING IS UTC, thus rendering UTC times INVALID because they
    do not have DST. Why does this function monkey with DST at all?

    I have several international web sites on this server, one of
    which has over 100,000 users who have contributed over 70 million
    records, all with UTC timestamps. The problem occurs during the one
    hour period EVERY YEAR when daylight saving time is started. It
    does not do this in the fall when the time reverts. So, yes, the
    problem only occurs during 1 hour out of 8,760 hours, but when you
    start with 70 million records over 5 or 6 years...
    But the danger is for anybody who stores or manipulates a
    date/time OTHER THAN the date/time that is being used internally to
    the server. In other words, if your server is set to Central Time,
    and you have users in Hawaii or Arizona who need to store their own
    date/time, it is likely to apply Central Timezone RULES to that
    date/time, even if Hawaii and Arizona don't use DST.
    Let's say you're scheduling operating rooms in a hospital in
    Honolulu. All the CF routines are going to make sure to shift those
    times forward an hour without warning, have a nice day. In my case,
    it is happening with UTC, but it could be ANY time zone that has
    different rules than the ones on your server.
    Yes, I can probably figure out a different way to process
    times, but this is a massive system with thousands of different
    templates. In fact it affects several pretty massive software
    systems with millions of lines of code, so it's not as if I can
    just change a few SQL queries and be done with it.
    It probably should be a rule for anybody operating a
    ColdFusion server in an international setting, where dates and
    times from different regions might need to be stored in a database,
    to set up the server on UTC time just to avoid this problem.
    Me, I have to
    a. find all the places this will affect in thousands of lines
    of code,
    b. try to decide what impact going to UTC on the server will
    have on things like scheduled tasks, email servers, etc,
    c. then figure out whether there is any way to repair tens of
    thousands of corrupted records

  • Java 1.4 and Daylight Saving Time 2007

    The current version of Java 1.4.2 for Tiger, 'Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-244)' does not handle the new 2007 Daylight Saving Time rules correctly. Will Apple be updating Java 1.4.2 to the version that does support 2007 DST correctly? (at least 1.4.2_11 is required per Sun, http://java.sun.com/developer/technicalArticles/Intl/USDST/).
    If so, when? Thanks!

    Since you didn't list your computer, here's a link to Java 5.0 release 4 for both PPC and Intel-based Macs, which came out in April: http://search.info.apple.com/?q=J2SE50Release4.dmg&type=kbdload&search=Search&lr =lang_en&search=Go. That should solve your problem.

  • Clock UI control and daylight saving time.

    Hi,
    We have a customer that has several sites around the world.
    In a VC-model I like to use the Clock UI control to display the times of the different sites.
    This can be done by setting the ‘time zone’ in the control properties.
    A long ago we have introduced ‘daylight saving time’.
    It seems that the clock control does not do anything with this ?
    How can I change the time zone when the model is running ?
    Can it be done by an expression and how ?
    There is also a problem of the country, some have DST, others don’t.
    See http://en.wikipedia.org/wiki/Daylight_saving_time_around_the_world
    Example:
    I have 2 clocks and the end-user lives in Amsterdam:
    Amsterdam, time zone = GMT + 1
    Santiago, time zone = GMT – 4
    During the winter in Amsterdam it is summer in Santiago and has ‘daylight saving’ so the time in Santiago should be GMT – 3 in stead of GMT -4.

    With the current version of VC / flash, it is not possible to display the correct time all the year 'round.
    If you only want to show the (user) current time then you can use this VC clock object.
    If you need to show clocks from different cities around the world, than its better NOT to use the VC clock.
    Because you can not define the country and city in the clock properties, that determine the use of DST, it will not always show the correct (default / DST) time.
    Solution:
    Add a HTLM-view to your model with a links to a web clock.
    Nice (free !) clocks can be found (and customized) on <a href="http://www.worldtimeserver.com/clocks/wtsclock001.aspx">worldtimeserver.com</a> or <a href="http://www.timeanddate.com/clocks/free.html">timeanddate.com</a> .
    Example:
    For the city Santiago (Chile) the URL =
    http://free.timeanddate.com/clock/ielrw91/n232/tluk/fn13/fs16/fc009/tt0/tw1/td2/th1/ts1/tb4

  • Switch from daylight saving time to winter time

    Hello,
    Can somebody describe why it is recommended (note 7417) to shut down the system for a little over two hours? Why is is not enough to deactivate the system 5 minutes before last daylight saving time hour has started and activate it when the winter time is started? Why should we wait until the first hour of winter time has ended?
    Note 7417 gives the following example:
    'If the hour from 2:00 to 3:00 occurs twice when you change to standard time, you must deactivate the system from 01:55:00 AM until 3:05 AM"
    It is not clear, why the system cannot be activated at 2:05 AM after the time is switched...
    Thanks in advance,
    Yelena

    Hi Yelena,
                        Check the note 102088, it's clearly mentioned about 'double hour'  and why it need's to be shout down?.
    Regards,
    Hari.
    PS: Award points if helpful.

  • Daylight Saving Time Changes for 2007

    Hello Friends
    Sun's J2SE 1.4.2_11 has taekn care of the new Daylight Saving Time changes in accordance with The Energy Policy Act of 2005. Does anyone know if bea has incorporated same changes to their Jrockit, if so then starting which version.
    http://java.sun.com/developer/technicalArticles/Intl/USDST/
    Thanks for the answers in advance.
    Regards
    Rajeev Bhogal

    Hello All
    We currently compile and run our application with Jrockit 1.4.2_04 (build 1.4.2_04-b05), if we change to minor version 11 for 1.4.2 should we recompile the application. I would think that DST related binaries would only be called at run time not compile time, however I am far from being a compiler expert. Can any learned friend shed some light.
    Henrik what do you think.
    Regards and Thanks
    Rajeev Bhogal

Maybe you are looking for