UCBATCH00 and UCBATCH01 execute task

Hi All,
I have to upload my consolidation data in SEM BCS using a task. WE have two program UCBATCH00 to execute a task. When i use this program in foreground then it gives me statistical report about uploaded data. When ever i execute the same program in background then it does not create any report in spool.
I have to schedule this program in background and need a statistical report in spool for do the analysis later on.
There is another program UCBATCH01 (Schedule and Execute Task). Even though this program does not create any report in spool when i schedule in background.
I need to execute my task in background and need a statistical report in spool to analyse later on.
Thanks in advance.
Regards
Praff

Hi Sayed,
My apologies. I have a similar query on the Bangladesh slabwise query you posted earlier. If you could, please kindly share with me how do you configure for Bangladesh WHT requirements.
If you could, please reply to the message that you posted earlier on the query for Bangladesh WHT with your solution.
Hope to hear from you soon as I am also encountering a similar requirement from my client for Bangladesh too.
Thanks!
Cheers,
Orange

Similar Messages

Errors when attempt to execute task 'Approve and Deploy to Product'

Hello all,
I updated the pricelists from BCC, an error occurred when I attempted to execute task 'Approve and Deploy to Production', it shows ‘atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.’
Here is the ATGPublishing server error log:
atg.process.action.ActionException: atg.epub.workflow.process.WorkflowProcessResources->invalidTargetName : There is no target with the given name Production.
Can anyone tell me how to resolve this error. Thank you in advance.

Check this in your production BCC component browser.
/dyn/admin/nucleus/atg/epub/workflow/process/WorkflowProcessManager/?action=seedefinition&process=/Commerce/editCommerceAssets.wdl
Search for approveAndDeployProject, you will find the target. Make sure its correct and same String value is used in BCC when creating sites.
And make
atg/epub/Configuration.properties
queryWorkflowTargetByID=false
Otherwise send me the contents from dyn/admin
Peace
Shaik

Execute Task works in one area but not the other

I have two Execute SQL Tasks. Each executes the same stored procedure from the SQL Statement property with a different parameter and they insert into the same table. One is at the end of the package and only runs if a Rollback
is done and it works fine. The other runs when a script is performed and returns Failure. When I run the other package and the Script fails the Execute SQL Task gets a green check mark but the table is not updated.
I've messed with the properties and still no luck.
I can right-click on the SQL Task choose "Execute Task" and it works.
I've run out of ideas.

uspGenerateTasksForFailedSSISPackage is a stored procedure that inserts into a table.
ALTER PROCEDURE [dbo].[uspGenerateTasksForForFailedSSISPackage]
@strTaskDescription varchar(max) = NULL
WITH RECOMPILE
AS
BEGIN
SET NOCOUNT ON;
Declare
@dtEnteredDateAndDueDate date = GetDate(),
@intTodoCategoryCode int = 13,
@strEnteredBy varchar(20) = 'AUTO'
INSERT INTO ToDos (UserID, EnteredBy, EnteredDate, DueDate, Description, CategoryCode)
Values (@strEnteredBy, @dtEnteredDateAndDueDate, @dtEnteredDateAndDueDate, @strTaskDescription, @intTodoCategoryCode)

Call function module in backgrouns task and in update task

Hi Gurus,Pls crear me on the " <b>Call function module in backgrouns task and in update task</b>".
how it works and waht is the link with LUW releated to these .
also heard that commit work statement aslo linked with this.
Pls clarfiy me with expalnation of code.

Hi sridhar,
the explanation already given is correct and good. Small add-on:
All functions called during one LUW with addition IN UPDATE TASK are stored together with their actual parameters in a temporary memory area. The moment a COMMIT WORK is issued, the functions are released to be executed by a so-called update task which is running in the background. This explains why functions called in update task never return anything, no SY-SUBRC and no export or table parameters If a function called in update task raises an exception or runs into an error the calling user will get an express message informing about this. Also, all database updates done by this update process are rolled back to keep consistency.
This proceeding helps to keep database tables consistent and allows the user to keep on doing his work before all database updates are complete. You may have seen messages like "material will be changed" after saving. If you open the same material immediately, you'll get a message "object locked by...<yourself>". This means the update task is still running.
Regards,
Clemens

Material specification and Inspection plan - Task list usage

Dear Friends,
In inspection type Task list usage is assigned
For Example
inspection type 01 - usage - 03
inspection type 05 - usage - 05
inspection type 06 - usage - 07
inspection type 10 - usage - 06
In my scenario i want to use all the above inspection type for a product
if i use mateial specification there is no any problem with my Task list usage
If suppose i use inspection plan do i need to create different inspection plan with different usage
or is it possible to create one inspection plan with all the above usage
what about universal usage 03 can i use it
i try to use but system does not triggering inspection lot
can any one Suggest some ideas
Many Thanks & Regards
Raj

Hi Raju,
All of first pls understand the concept of Task list and specification.
If you need to inspection any material in very systematic manner, where you will have well segregated operations where the appropriate Work Centers will be bind and under that hierarchy MIC will be attached. The inspection will be governed by some inspection points. And according the the same Samples will be calculated. When you wanna go with all these functionality then you must have to use Task list (Inspection plan).
And if you don't wish to have these functions then simply go with the material specification.
Now it comes the actual query about task list usage.
If there is a common inspection plan is supposed to be used for all the inspection types for your material then you can prepare only one inspection plan, put ant of the Usage to it it can be 05 or 03 universal. But what you have to do is,
Go to SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Types Execute and set the Task list usage as the same it is set in the inspection plan for all those Inspection types for which that common inspection plan is supposed to be used.
Note:- There is no any link between inspection lot creation and task list usage of inspection plan.
Regards,
Shyamal

Work Flow Template and Work flow tasks

Hi,
Work Flow Template and Work flow tasks are the two objects which are found surprisingly in our client system(when we go to PP01/ HRP1000 IN SE16 ).My employer wants to know what these are:
Can any one please tell me about "Work Flow Template and Work flow tasks".
are the SAP Generated?
Can we delete them if we don't need?
Thanks in Advance
Gopi Palleti

Hi Gopi,
Workflow Template and workflow tasks are part of SAP Business workflow.
A business workflow is an executable process embedded in SAP applications that you use to automate business processes.
You can find more info here.
http://help.sap.com/saphelp_nw70/helpdata/en/c5/e4b62c453d11d189430000e829fbbd/content.htm
Regards,
Sharadha

Problem executing task in consolidation monitor

Hello
I have a small issue i get the following error message when i try to test executing a task in cons monitor for load from data stream
Task 001001 cannot be executed in period 001
Message no. UCS0150
Diagnosis
No method with a period category containing period 001 is assigned to task 001001 in version 111 for the time period 2008/001.
System Response
Task cannot be executed in period 001.
Procedure
If you still want to execute task 001001 in period 001, you need to use period categories that contain period 001 in the customizing settings of the task when you assign a method.
Here I am trying to collect data using Load from Data Stream, I have defined the method and I am able to test the same in consolidation workbench
But the same does not work in consolidation monitor
why??
Following are defined :
Method for Load from Data stream
Method
Task
In consolidatin monitor I have
Hierarchy
task group and task.
Regards
sameer

Hi Sameer K
Now I got the same error message, when executing data collection task in cons monitor.
I did as per inputs provided by you in this thread. But it was not work.
Let us explain what occur in my end is i changes period category in data collection task and then save it. After than I close the session and reopen, what ever i changes earlier was not appearing in my workbench in Data collection task.
Configuration in Data Collection task was:
Cons Freq: Monthly
Period Category: All method follows same method. In this we maintain 1 to 12 periods
Assign method: Depends on Company (I configred data collection method for each company)
Pls provide inputs to resolve
Madhu

Relinking Forms and Reports executables

Hello All,
I am relinking forms and reports, using below commands, as part of Java 1.7 downgrade.
cd $ORACLE_HOME/forms/lib32
$ make -f ins_forms.mk sharedlib install
cd $ORACLE_HOME/reports/lib32
$ make -f ins_reports.mk install
What i found is, the timestamp of the files under these directories($ORACLE_HOME/forms/lib32 and $ORACLE_HOME/reports/lib32) is not that of today rather it's old timestamp. How to make sure that I have completed this task(relinking forms and reports executables) successfully?
Thanks,
Moor

Do you get any "Fatal Error" Or "Error Code" messages at the end of the log file?
Link fails applying Patchset 10.1.2.3: Error in invoking target 'proxy_install runm_install' of makefile ins_reports.mk (Doc ID 821253.1)
Relink Reports After Applying Any Patch, Getting Errors: collect2: ld returned 1 exit status, make: *** [rwbuilder] Error 1 (Doc ID 1218994.1)
Thanks,
Hussein

Error Task Sequence Manager failed to execute task sequence. Code 0x80004005 TSManager

Dear All,
I need your Help, as I am getting below mention error in deployment of OS through MDT 2013.
Expand a string: WinPEandFullOS   TSManager   6/5/2014 11:40:50 AM   1464 (0x05B8)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf"   TSManager   6/5/2014 11:40:50 AM   1464 (0x05B8)
Process completed with exit code 5627   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
!--------------------------------------------------------------------------------------------!   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Failed to run the action: Install Operating System.
Unknown error (Error: 000015FB; Source: Unknown)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending status message . . .   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set a global environment variable _SMSTSLastActionRetCode=5627   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set a global environment variable _SMSTSLastActionSucceeded=false   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Clear local default environment   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Let the parent group (Install) decides whether to continue execution   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Unknown error (Error: 000015FB; Source: Unknown)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending status message . . .   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing in non SMS standalone mode. Ignoring send a task execution status message request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Task Sequence Engine failed! Code: enExecutionFail   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
****************************************************************************   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Task sequence execution failed with error code 80004005   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning Up. Removing Authenticator   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning up task sequence folder   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,508)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
DeleteFileW(sVolumeIDFile.c_str()), HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,508)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully unregistered Task Sequencing Environment COM Interface.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Command line for extension .exe is "%1" %*   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Set command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Executing command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
==========[ TsProgressUI started in process 320 ]==========   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Command line: "X:\Deploy\Tools\X86\TsProgressUI.exe" /Unregister   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Unregistering COM classes   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Unregistering class objects   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Shutdown complete.   TsProgressUI   6/5/2014 11:51:18 AM   552 (0x0228)
Process completed with exit code 0   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully unregistered TS Progress UI.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
g_TSManager.Run(), HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,657)   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Error Task Sequence Manager failed to execute task sequence. Code 0x80004005   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Sending error status message   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
In non SMS staqndalone mode.Ignoring SendStatusMessage request   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Finalizing logging from process 1456   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Finalizing logs to root of first available drive   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Successfully finalized logs to C:\SMSTSLog   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Cleaning up task sequencing logging configuration.   TSManager   6/5/2014 11:51:18 AM   1464 (0x05B8)
Deployment is going failed.
Regards
Sachi

Note：Only mass storage device drivers and network adapter device drivers should be added to boot images because other types of
drivers are not needed and will increase the size of the boot image:
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Displaying both ABAP webdynpro and Java Webdynpro tasks in the UWL

Hi,
We have two an issue when trying to get the UWL to process two different types of workflow tasks : ABAP webdynpro and Java webdynpro.
Examples of these tasks are:
TS12300097 u2013 LeaveRequestApprover u2013 Java Webdynpro
TS17900100 - ASR_PROCESS_EXECUTE u2013 ABAP webdynpro
We have two backend systems configured
SAP_ECC_Financials u2013 This has the WAS host pointing to the java stack (xxx:50000)
SAP_ECC_Workflow u2013 This has the WAS host pointing to the ABAP stack (xxx.80xx)
In transaction SWFVISU all the tasks which use Java webdynpro have been configured to use the u2018Javau2019system (SAP_ECC_Financials) using the SYSTEM_ALIAS parameter
In the UWL configuration the system SAP_ECC_Workflow has been registered
In addition to this all u2018Javau2019 tasks have had an extra UWl config XML created to ensure that the SYSTEM_ALIAS is set to SAP_ECC_Financials
The system SAP_ECC_Workflow has been re-registered
The UWL cache has been cleared
However when we try to launch the java webdynpro tasks the system is trying to access the ABAP stack (It is still trying to access the Web AS location for the system SAP_ECC_Workflow even though the system alias was specified as SAP_ECC_Financials )
The ABAP webdynpro tasks (in this case a HCM process and form) are launched correctly
If we try the reverse (i.e register the Java system SAP_ECC_Financials and change the SYSTEM_ALIAS parameter for the ABAP webdynpro tasks to system SAP_ECC_Workflow) then the reverse happens. The java tasks can be launched and the ABAP tasks cannot.
Does anyone have a solution to this problem. Surely other people have implemented both ABAP and Java webdynpro workflows?
Any help much appreciated
Andrew

Thanks a lot for all your replies..
The workitem type registration has been done already, but still it doesn't work..
But here is the actual problem...
There is a link 'Execute Workitem' in the inbox of the approver, or the second level manager...
In the leave application, when we click on this link it is taking to the portal as the task is the Webdynpro Java application task. Whereas, when using ABAP webdynpro application task, it is taking to R/3 - which means that the user cannot access this link without R/3 access. The users are given only portal access, they don't have access to backend R/3.
The requirement is that the link has to take the user to portal directly instead of R/3 - i.e it should ask only for the portal id and password.
Since it was working fine with leave application, I changed the task to Java webdynpro task, but I think the Java Webdynpro application is not deployed in the server.
Please can anybody suggest.
Best Regards,
Sushmitha

How to detect window close event and do some task before exiting

Hi
Anyone knows how to detect window close event and do some task before exiting ?
Sridhar
Solved!
Go to Solution.
Attachments:
window close event.JPG ‏34 KB

Yes .You can discard the panel close event by passing "TRUE" boolean value to the "discard ?" terminal which is lied in the right side of that panel close(filter) event.& It will work in executables. See attached picture.
Attachments:
Panel Close.JPG ‏12 KB

Would you Open and Close DAQmx tasks within a function or Globally

Hi Guys,
This should start something.
The subject is DAQmx Tasks.
If you were writing a function that is called many times, say MeasureVolts (double *Value) to obtain a reading from an Analogue Input Channel.
Would you.
1. open and start the task inside the function, do the measurement and then close the task inside the same function.
or
2. open the task globally and later do the measurement inside the function using the global task then close the task only when the application is closed.
I am mostly concerned with the overhead of task generation and closing, what do you guys and girls out there do?? and what is the general opinion?
I would appreciate your views.
Regards
Paul.

I would definitely NOT keep configuring and clearing (I think that's what you mean by open and close) the same task over and over. I would configure once, read many times in my main app, then stop & clear once.
I typically like to package such data acq into an "Action Engine" that keeps track of its own DAQmx task id so I don't need to sling that task id wire around into multiple parallel loops / vi's. Attached is a very stripped-down example for Digital Input.
I would typically do more with error testing and would make the "Action" enum into a typedef custom control, but this gives you the basic idea. The action engine approach works very nicely when there's a small # of different kinds of input parameters and output info needed to support all the necessary action cases. When you start needing a large number of differnent kinds of inputs and outputs to support the desired actions, then you start having difficulty with (1) having enough terminals to wire and (2) remembering which inputs and outputs are meaningful for which actions.
-Kevin P.
Attachments:
DI Action Engine.vi ‏75 KB

Can I use Icloud to outlook sync only for calendar and contacts (not tasks)?

I starting using Icloud Sync wiht outlok 2010 and like it - howeve rI only want to sync my Calendar and Contacts not Tasks - is that possible?

No. It's all or nothing.

Task Manager Not loading Properly. Giving Error No more threads can be created in the System.NAPStatus UI and Some other Task related Errors

I have a problem with the Task Scheduler. It is not opening properly it is giving Error Message box at this time i am unable to post. The Tasks Scheduler is starts with a error alert "No more threads can be created in the System.NAPStatus UI".
I am unable to view the history of the tasks schecduled.It is giving message as
"The user account does not have permission to Access the Task History."
How to fix it. It is frustrating as can't able to track my Tasks and Create new Tasks. Any Suggestions helpful.
Thanks in Advance.
RehaanKhan. M

Hi,
Thanks for your post.
Please check event viewer if there are some error logs?
Meanwhile, there is a similar thread has been discussed:
Receiving error about "no more threads"
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
Regards.
Vivian Wang

Error while Rebuild Forms and Reports Executables

Dear Experts,
Kindly note that while running the below commands I am facing the below error.
Please look into it and advise.
Rebuild Forms and Reports Executables
cd $ORACLE_HOME/forms/lib32
Note: if this directory does not exist:
cd $ORACLE_HOME/forms/lib
$ make -f ins_forms.mk sharedlib install
cd $ORACLE_HOME/reports/lib32
Note: if this directory does not exist:
cd $ORACLE_HOME/reports/lib
$ make -f ins_reports.mk install
[applmgr@ORACLE lib]$ make -f ins_forms.mk sharedlib install
for libs in libfrmjsl.so.0 libd2f.so.0 libia.so.0 libic.so.0 libicg.so.0 libid1.so.0 libid2.so.0 libidd.so.0 libidg.so.0 libidl.so.0 libie.so.0 libifc.so.0 libifg.so. 0 libig.so.0 libigo.so.0 libihm.so.0 libiic.so.0 libilfrm.so.0 libimc.so.0 libimg.so.0 libioc.so.0 libiod.so.0 libipc.so.0 libipg.so.0 libiplsn.so.0 libiplsd.so.0 lib irm.so.0 libit.so.0 libitg.so.0 libiwc.so.0 libiwg.so.0 libsosd.so.0 libibfrmw.so.0 libicw.so.0 libifcw.so.0 libijc.so.0 libijcw.so.0 libiffw.so.0 libiicw.so.0 libiif w.so.0 libiiiw.so.0 libimfw.so.0 libipfw.so.0 libiqw.so.0 libitw.so.0 libiwcw.so.0 libiwfw.so.0 libixw.so.0 libsosdw.so.0; do \
                rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//$libs ; \
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/bin/genshlib /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//$libs ; \
        done
rm -f frmbld
gcc -m32 -o frmbld -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2 /lib//stubs -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/ apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/s0nnmain.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sslidtab.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ui10.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/uiicxd.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/ifzxtb.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sixn.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/sixp.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/iwvgbm.o \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libie.a -lilfrm /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libie.a -lig -lifg -lig -limg -liwg -lidd -lidl -l idg -lid2 -lidg -lid1 -ligo -litg -lihm -limg -lipg -licg -lipc -limc -lifc -lijc -liwc -liplsd -liod -lioc -lic /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libsosd .a -liic -lit -lic /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libsosd.a -lipc \
        /u01/applmgr/ORACLE/apps/tech_st/10.1.2/forms/lib/istuic.o \
        -lrws \
        -lnn -lobx -lzrc -lvgs -lde -lucol -lca -luicc -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -luihx -luc -luipr -luimotif -lot -lrem -lree   -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -ld fc -luat -lutc -lutj -lutl -lutsl -lpls10 -lplp10 -lplc10 -lpls10 -lplp10 -lslax10 -lsql10 -lpthread -lclntsh `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/l dflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10 -ln sgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /u01/a pplmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2 /lib/ldflags`    -lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls1 0 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat /u01/applmgr/CDV1E BS1/apps/tech_st/10.1.2/lib/sysliblist` -Wl,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u0 1/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/xawt:/lib:/usr/lib -lm `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lpthread -lm     -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ -lsnls10 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/l ib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads -ljvm -Wl,-rp ath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `realpath@GLIBC_2.3'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
collect2: ld returned 1 exit status
make: *** [frmbld] Error 1
[applmgr@ORACLE lib]$
[applmgr@ORACLE lib]$ make -f ins_reports.mk install
rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.so; \
        rm -f /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.so
rm -f rwsutil.o rwspid.o ; \
        /usr/bin/ar x /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.a rwsutil.o rwspid.o ; \
(LD_OPTIONS="-z muldefs"; \
        /usr/bin/gcc -m32 -o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librwu.so -shared -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ rwsutil.o rwspid.o \
        -lm /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libclntsh.so -lpthread -Wl,-rpath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -lc )
rm -f zrhitem.o zrhcursor.o; \
        /usr/bin/ar x /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a zrhitem.o zrhcursor.o
rm -f rwbuilder
gcc -m32 -o rwbuilder -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2//lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//stubs -rdynamic -Bdynamic -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386 -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads -ljvm rxmasb.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/ui10.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/uiicxd.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwsng.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwscl.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwssc.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwssc0.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwsdt.o /u01/applmgr/ORACLE/apps/tech_st/10.1.2/reports/lib/rwscr.o -lrw /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a -lobx -lnn -lrws -lde /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//libzrc.a -lrws   -lucol -luicc -lca -lmma -lmmiw -lmmov -lmma -lmmos -lmmoi -lmmia -lmmft -lmmcm -lvgs -luihx -luc -luipr -luimotif -lot -lrem -lree -lrec -luiimg -luimotif -luipr -luiimg -luc -lrem -luimotif -luia -ltknqap -luipr -luimotif -lutt -lix -lixd -lrod -lror -lros -lrod -lror -lros -lrod -luat -ldfc -lutc -lutj -lutl -lutsl -lpls10 -lplp10 /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/libplc10.a -lpls10 -lplp10 -lslax10 -lsql10 -lclntsh `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/ldflags`    -lnsslb10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10    -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10 -lcore10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10   `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -Wl,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib,-rpath,/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/xawt:/lib:/usr/lib -lm `cat /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lpthread -lm   -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib -L/u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib/stubs/ -lsnls10 -lpthread -ljvm -Wl,-rpath,/usr/X11R6/lib -Wl,--as-needed -lXi -lXtst -Wl,--no-as-needed -L/usr/X11R6/lib -lXm -lXt -lX11 -lm -lXp -lXext /u01/applmgr/ORACLE/apps/tech_st/10.1.2/lib//librw.a -lnsl
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_timedwait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_signal@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `realpath@GLIBC_2.3'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_wait@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_init@GLIBC_2.3.2'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `__stack_chk_fail@GLIBC_2.4'
/u01/applmgr/ORACLE/apps/tech_st/10.1.2/jdk/jre/lib/i386/server/libjvm.so: undefined reference to `pthread_cond_destroy@GLIBC_2.3.2'
collect2: ld returned 1 exit status
make: *** [rwbuilder] Error 1
Regards
Mohammed. Abdul Muqeet

Please implement the solution in (Upgrading JDK To 7_25 - Step 3.7 Rebuild Forms Reports: Error: Collect2: Ld Returned 1 Exit Status (Doc ID 1569998.1)).
Thanks,
Hussein

UCBATCH00 and UCBATCH01 execute task

Similar Messages

Maybe you are looking for