UCCE 10.5 Outbound with SCCP Dialer

I try to use SCCP Dialer with UCCE 10.5, and it doesn't work, but in documentation i find these words: "The SCCP Dialer is deprecated in Unified CCE release 10.0(1).".
In document: "Outbound Option Guide for Cisco Unified Contact Center Enterprise
and Hosted Release 10.5(1)" also - "The SCCP Dialer is deprecated for release 10.0 and will reach end-of-sale in an upcoming release." , but there is a paragraph - Outbound Option Installation: SCCP Dialer.
I don't understant SCCP Dialer still works or no? Help me pls.

Status ports in dialer [Ports C:4,R:0,B:0], but in CUCM status Phone 30 VIP is "registered". Log file baDialer contains next rows:
00:00:07:147 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
00:00:07:147 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [4], Initialized: [1] ****.
00:00:08:147 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.
00:00:08:147 dialer-baDialer Trace: (DD) **** Configured SoftPhone Channels: [4], Initialized: [1] ****.
00:00:09:147 dialer-baDialer Trace: (DD) **** All SoftPhone Channels not Initialized ****.

Similar Messages

Using the mac mini with a dial up internet connection

How do I go about using my mac mini with a dial up internet connection? I am soon to be moving to a rural area and dial up will be my only internet option. Please be very specific in your answer as I am not a very tech savvy fellow. Thank you for your help.

The last time I needed to use dial up I used this amazing device from actiontec:
http://shopping.netsuite.com/s.nl/c.ACCT122499/it.A/id.72/.f
Very hard to find one now, but it has the advantage that it connects to the ethernet ports of up to two computers, rather than using a less reliable usb connection.

ATA 186 - Faxing with sccp on CCME

Is there any specific config required to get a fax working with an ATA 186 with sccp, both in the ATA settings and ccme config ?
Any useful links or example configs would be a great help
Thanks in advance

Hey Mark,
Here are some good ATA - Fax related docs;
Field Notice: Fax Passthrough Limitations on ATA 186
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_field_notice09186a0080094af7.shtml
Configuring the Cisco ATA for SCCP
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00801e0e0c.html
Configuring and Debugging Fax Services
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_administration_guide_chapter09186a00801e0dff.html
Hope this helps!
Rob

Change ip with not dialer

hey
i'm connected to the internet with no dialer (some calls it mpls)
for change ip in windows, i need run this scrips
ipconfig /release
netsh interface ip set address "local area connection" static 192.168.0.10 255.255.255.0 192.168.0.1 1
ipconfig /release
netsh interface ip set address "local area connection" dhcp
i tried to make a new script for arch but the ip stay the same
#! /bin/bash
INET_IP=`/sbin/ifconfig eth0 | grep 'inet addr' | awk '{print $2}'| sed -e 's/.*://'` #Get IP
echo your old ip was $INET_IP
ifconfig eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255
dhcpcd eth0 -k
sleep 2
dhcpcd eth0
sleep 2
INET_IP=`/sbin/ifconfig eth0 | grep 'inet addr' | awk '{print $2}'| sed -e 's/.*://'` #Get IP
echo your new ip is $INET_IP
someone know what this command do
ipconfig /release
without her ,it will not work.
ty

Hi, thanks for this answer.
I know that I have to execute this command in the CLI, however the problem is the access to the CLI.
When connecting with telnet, I have a menu, but not the CLI itself.
And I don't know how to switch from this menu to the CLI (Ctrl-Z doesn't work).

HT1430 I'm holding the button forever and it still isn't resetting. It's stuck with the dial thingy rotating.

My IPAD2 is stuck with the dial rotating. This dial came up just after I slid my finger across the shut down bar this morning. It has been rotating all day and doesn't respond no matter how long I hold down the restart button. I can't think of why it would possibly be doing this? It do however frequently have trouble with the included CAMERA app. When I try to email video clips it often closes the app or freezes it.
How do I determine which operating system I have?

button or buttons? the reset is triggered by holding down the sleep and home buttons at the same time, past the red slider and until you see the silver apple and it reboots.

UC320W Problems with the dial plan

Problems with the dial plan ... There is a method to modify the External Dial Plan, we can not dial some numbers (800 XXX XXX, 115, 118, 187, etc., are special numbers in Italy), happens on FXO lines and SIP,in external.
Example: The operator enters "on any phone" 0 (for outside line) then 800 000 000,on the composition of the second 0, the phone responds "invalid number" and does not allow the call
We think it is a problem of Italy dial plan, you can change them?,
our system is configured as a region of Italy and Italy dial plan
is a known problem? you know to help me resolve it

Perfect, we wait for the update, this happens also for other special numbers (187, 191 customer service phone numbers and 118, 112, 115 emergency numbers). It happens with any line it is FXO, SIP, Shared. The problem is in the dial plan, the numbers are not included, the system does not accept them, and blocks the composition. Exists a method for change the file loaded into the configuration page "region" the system is set to Italy, I have seen that you can import the file from the computer, you can download the file "Italy", edit, and upload in the system '.
We are a telecommunications company, we install telephone systems, we would like to offer your product the 300 series our clients. We are testing in our lab your UC320W.

Does firefox work with aol dial up

Does firefox work with AOL dial up?
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; AskTB5.6)

Yes. :)

UCCE for CCM failover with DNS SRV.

we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
The srv.xml file updated with CCM IP addrs in this path \Cisco\CVP\conf\srv.xml
On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
What will be the issue? Kindly let me know what needs to be done.
Thanks & Regards
JP.

So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
Cheers,
Kris

CME 7.1 with SCCP 7940G phones and SIP connection to a VOIP provider - inbound outbound fails

Here's a quick and dirty diagram of a CME 7.1 configuration. The phone can all call each other but something is not quite right with the SIP provider. The registrar and SIP registration pieces are working but most of the configuration examples that I've seen make me think that the CME router was being used as the edge device to the internet. From my drawing, you can see that is not the case here. My edge device is a Cisco ASA5505 with 9.2.x software running. I might be missing something in the SIP gateway knowledge department. Without diving into the configuration, I'm wondering if SIP messages are failing for calls because of NAT'ing? Trying to do searches has been tricky because I keep running into information that is more about setting up CME for SIP phones or just getting SIP to work between CME and a SIP provider. I have that part working. I'm just a bit unsure about how an SCCP 7940G gets an outbound call or even gets one to come in.
When I dial from my cell phone to the pilot number, there are no rings, it just goes to the VOIP provider's voice mail. When I try to dial out, I get a fast busy.
So, is NAT a consideration? Will the SIP gateway set up a call (forward) via the pre-established SIP connection? Yeah, I do sound like a newb.
If anyone has good information about, let's say, an inbound call and how that traffic flow works.
Thanks!

Have you configured your ASA to either NAT the IP address of the CME router or to do port forwarding for port 5060?

Sccp dialer in virtual environment - ucce 8.0 enterprise

Hello,
according to Cisco's documentation, the sccp version of ucce dialer is not supported on VM enviroment. Can someone explain exactly what does it mean? Is there some technical reason fo that or just for future only sip dialers will get tac support ?
Thanks!

Gergely,
I'm using ICM 8.03 with the SIP dialer. Works fine for agent based campaigns, but fails on the send to VRU node on an IVR campaign. I have a translation rule for the DN, but am not sure where I reference the label. Do I need a dial peer on the PSTN gateway, or the VXML gateway? I have a static SIP route to the VXML gateway but it still fails. I haven't traced the VRU PG yet, but I guess that's my next step. Since you have a customer with a working SIP dialer, I thought you might point me in the right direction. Thanks.
Sent from Cisco Technical Support iPhone App

UCCE 10.X Outbound Dialer

Hi,
Is it possible to configure the outbound dialer so that when we have a list of customers from a different countries, the outbound dialer selects an Agents who has a skill for that specific country for language purpose?
Thanks,
Nizar

You can create multiple Import rule, query rule and campaign to achieve this.
lets say that you want english speaking customer to talk to english speaking agent.
The English speaking Agents are under skill group say English_SG.
now you can try this steps to achieve the scenario.
1) create a dialing list by gathering all english speaking customer in to single list.
2) create import rule and map this list to import rule.
3) create query rule, and above created import rule to query rule.
4) create a campaign sy English_CMP and assign above created Query rule.
5) in the same campaign configuration in skill group selection tab, assign English_SG(english speaking agents) and in the Dialed Number box create a dial number which will be used by MR PG to reserve the agents.
6) for the same dialer number, schedule a reservation script and select LAA from English_SG
thats is you are done at this point.
same thing you can try for other languages, by creating different campaign and query as well as import rule.
i hope you have got the basic concept on how this can be achieved.
Regards
Chintan

UCCE - Time between outbound calls

Hi.
I am deploying an UCCE with Outbound Option but Agents wait in Reserved state more than 1 minute or 1 minute and a half between calls.
My customer says that with Nuxiba its time is 15 seconds.
My dialer is predictive and I have 20 E1s R2
Now, I read on documentation that ISDN is the only supported protocol but in Mexico ISDN does not exist with the provider (TELMEX).
Do you know what adjustments can work for my scenario?
Regards.

Hi
The total time it takes is due to the dialing list that you have. From the dialer log that you've provided, if I take a customer call that was successfully transferred to agent, it takes about 15s once the INVITE is sent, CPA is done and transferred to agent. For an example, with the sip call with id 8d0b434c-bf23d303-733f013d-75045a00 on port 226. INVITE was sent at 13:58:58:220, transferred to agent at 13:59:12:438 and BYE was sent at 13:59:12:524. For this call, the Agent was reserved on port 223 at 13:58:53:930. There were an unanswered call before the call was successfully transferred.
You need to tune the Campaign configuration about max lines per agent and abandon rate. Let me know if that helps.
Abu

CVP Opsconsole: Patterns for RNA timeout on outbound SIP calls - Dialed Number (DN) text box does not take any input

Hi there,
I'm having problems modifying the 'Dialed Number (DN)' text box under 'Advanced Configuration->Patterns for RNA timeout on outbound SIP calls' of the SIP tab in the Cisco Unified Customer Voice Portal 8.5(1) opsconsole. In a nut shell, I need to change the RNA timeout but some reason when typing into the Dialed Number text box, the input is not taken. The reason I want to change this settings is because my ICM Rona is not working with CVP:
https://supportforums.cisco.com/thread/2031366
Thanks in advance for any help.
Carlos A Trivino
[email protected]

Hello Dale,
CVP doesn't allow you to exceed the RNA more than 60 Seconds. If you want to configure the timer for DN Patterns you should do it via OPS console, It would update the sip.properties files in correct way, the above way is incorrect.
Regards,
Senthil

Setup Hotline Analog Phone with SCCP

Anyone out there can help me out how to setup a hotline in CUCM 8.6?
I've followed this procedure below, but I'm still getting an error message when I lift the handset such as "your dial cannot be completed...".
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080232b9f.shtml
Just in a nutshell, here is what I've done:
Extension: 1111 PLAR Analog SCCP Phone with: CSS_Hotdial and PT_Allowed (line settings)
TP: blank, PT_Hotdial and CSS_Hotdial, and called PTM: 2222
Extension: 2222 CSS_Allowed, and PT_Allowed - no changes on this extension...
Added the PT_Allowed into CSS_Hotdial. The order is: PT_Hotdial/PT_Allowed
Both lines are on the same VG204-vg20x-ipvoice-mz.124-22.T5.bin. When I selected hotline feature it says is supported Analog Phone SCCP, but I did not see the VG. It looks like is not supported hotline on VGs. Can someone confirm that?
Am I missing something? Do I need to enable something under Service/Enterprise parameters?
Thank you!

Chris, thanks for your prompt help.
I thought the TP needs a CSS with access to the 1111 DN, not to the 2222. Because when someone lifts the handset on phone 1111 this phone should invoke the TP which translate and ring to the 2222 phone. Thus, I put this CSS_Hotdial on phone 1111 under line.
And my TP looks like this: PT_Hotdial and CSS_Hotdial, and called party transformation mask 2222
The CSS_Hotdial has only access to one PT_Hotdial.
Also the two phones 1111 and 2222 are on the same partition PT_Allowed, but they are on different CSS.
Anyway I also tried what you said but did not work. Are you sure this hotline works on VG204? I think it is not working because this feature is not supported on VG204 nor in any VG model.
If you are sure it should work. Could you please elaborate more this solution with PT/CSS/TP?
Once again thanks

Video and Telephony Integration: Enterprise UC with common Dial-plan

Dear Expert,
I have asked the same question under Collaboration but thought to post it under this group too as this is mainly inclined towards Video Integration. I hope this is the right place to post this question.
The enclosed design shows the proposed UC setup which is based upon CUCM (VEr 8.5), ISR Routers(G2 3900/2900Series with PVDM3), Tandberg VCS and VCS expressway..
As always Thank you for all your input..
Regards
M
The expected solution out of this design should provide following
1.Video End point(h323) can call any IP Phone by dialling 5 digit extension and vice-versa.
2.Video end point can make outbound Local,National and International call by dialling the same way as it exist for IP Phone meaning for Local and Long Distance within US by dialling 9 then 10 digit number ,For International: 9011- Country Code- E164 number
3. Video end point will have the extension within 443xx range and can be reached by IP phone by simply dialling 5 digit extension. Route pattern with 443xx will be defined in the CUCM
4. Video End point can be reached by PSTN world by dialling full E164 number i.e 1712-564-43xx . In this call, CUCM will route the call to Video set-up.
5. Common Billing to be used for both Video and Phone setup towards charge-back.6. The most important aspect is Encryption which created all confusion and stopped my progress
Scenario:
Video Conference is going on and the participating users are :
- User on the Internet which have been joined to the conference by dialing their public IP and call established via Tandberg Expressway
-The 2nd user is an ISDN end point and call is routed through the CUCM to ISDN GW(R2)
- This is encrypted Video call
Encrypted Video Call is going on and all of a sudden there is a need to bring in an IP Phone Skinny end point(Audio only) and also a Mobile Phone user. It should be easy to bring these two user as part of the encrypted VC without dropping the ongoing VC.
I have gone through few Networkers Slide and also read that the 3900/2900 ISR supports media as well as signalling encryption and it is possible to achieve this set-up.
But because of involvement of integration with different product line (specific to Tandberg), needs clarification before starting with the lab set-up.
The interpretation of H323 RAS part when Tandberg VCS is acting as a Gatekeeper with respect to CUCM --is different than when Cisco Routers are being used as GK.
Tandberg Gatekeeper if integrated with CUCM comes into play for both Media and Signalling and always participate in the H323 call whereas if Cisco Router is acting as a Gatekeeper then once the RAS part is done Cisco GK goes out of the call.
So,
Please suggest whether anyone tried this setup? If yes then how to achieve this and what should be the link coming out of CUCM to Tandberg VCS-GK.( I think using SIP trunking will do this but not 100% sure about this). Feel free to suggest any design change or any hardware which is required...

Hi
As long as this is new instalation I recommend you to use SIP on all of the end points where possible and integrate with CUCM using sip trunk this will give you two main benefits
- the transformation of the called and calling number from and to CUCM will be easier
-if have end point using H323 and communicating with other end using sip the vcs will do internetworking to this call and you will need license for each internetworked call plus the media path will go through the vcs not direct between end points for internetworking
If you use sip make the end point name/sip usri as [email protected] Calls from vcs to CUCM use search rules with trsformation so if end point dial 123456 only from vcs and the default call is sip vcs will send it to CUCM as 123456@sip domain.com you need to do transformation before sending it to CUCM and send it as 123456@cucmip.
This is just in brief and also using the expersss way you can have your sip domain registered over the Internet and configure dns srv record point sip ton the vcs public ip and Internet calls can come to your end point sip name directly no need to publish ip to others to dial you
HTH
If helpful rate

UCCE 10.5 Outbound with SCCP Dialer

Similar Messages

Maybe you are looking for