UCCE 9 - How do you make Side B of the duplex pair the master rather than Side A

Hi all,
I have a customer with a Duplexed UCCE 9 install that is running from two geographically independent Data Centres.  So for example Side A is in DC1 and Side B is in DC2.  Side A is making the final routing decision whilst in normal operation.  From memory I believe that the amount of PGs the Router registers has an impact on the fact that Side A is seen to be the master in the decision making process.
On Side A (DC1) the PG numbers look like this
PG1A - CTI OS, CUCM
PG2A - Finesse PG
PG3A - CVP
PG3B - CVP
On Side B (DC2) the PG numbers look like this
PG1B - CTI OS, CUCM
PG4A - CVP
PG4B - CVP
DC1 is currently the Prime site for processing of the customers estate, with DC2 acting as the back up/DR Data Centre. The customer wishes to change the Data Centre priority around so that DC2 becomes the Prime site with DC1 becoming the back up/DR site.
To achieve this and make Side B of the platform the master decision maker, what is the best approach?
Many thanks in advance
John

Hi John-
Here is the link to the UCCE Design Guides that David was talking about:  
Cisco Unified Contact Center Enterprise Solution Reference Network Design, Release 9.x   
http://www.cisco.com/c/en/us/support/customer-collaboration/unified-contact-center-enterprise/products-implementation-design-guides-list.html
DJ

Similar Messages

  • How do you create a pdf which is in a readable view, rather than having to rotate the document?

    How do you create a pdf which is in a readable view, rather than having to rotate the document?

    This cannot be done with Adobe Reader. Do you have Adobe Acrobat?

  • How do you make sure internet is switched off with the new iso7. In iso6 you pressed the centre button twice and it allowed you to close down open tabs I want to do the same....or go back to is06

    How do you close down the internet in ISO7

    You do the same thing, but now your open apps are displayed in a window view. Swipe left/right to find the app you want to stop, then swipe the app up to remove it. By the way, this doesn't turn off the internet. It only removes the app from memory that may be accessing the internet.

  • HT1461 How can you make more 'Ram' available using bootcamp, on the windows side of things??

    Hey, i recently bought an iMac 20.5' (i5) and it came with 4gb Ram
    I am a music producer but the program i use is windows based, so i got bootcamp, all that works fine
    but ive been working on a new song for a while now and the prgoram has an 'indicator' showing how much CPU usage % and ram is being used.
    it is now at 1956mb! which should efffect because i have 4gb! right!??.. no it says (in windows sytem) 2.3gb (available)....
    So i went out and bought an extra 4gb, followed the instructions and Ram went int easy!!. I log onto Mac and yep 8 GB Of RAM!!
    so then i log into windows (through bootcamp ofcourse) and still 2.3 gb available....
    anyone know if i can make more avaible?? or do i have to reinstall windows through bootcamp???
    Thankyou
    P.S. 32 but windows 7 is what i use

    Windows installed using Boot Camp uses all your comptrer's resources.
    Windows 7 32 bit can only use about 3 GB of RAM. The limitation is that 32 bits can not address more than this. If you want to address and use more RAM then you need Windows 64 bit.

  • How do you make seperate photo albums/camera rolls for the ipad and iphone

    I am trying to make photo albums and different camera rolls for the ipad and iphone.  can anyone tell me how to do that?

    I don't think you can in the native iPad Photos app. It's just where all photos save in camera roll. If I sync folders with pic from my MacBook, it syncs as a separate album in Photos, but I can't move pics between them. I've actually just downloaded an app that allows for sorting photos by creating links to the photos to place them in the folders you create--it does not make duplicates of the photos to do this, so no worries of using up space.
    Anyway, the app is Best Album +transfer. Right now on sale for 99€ which was why I decided to get it.

  • In flash vidioes how do you make a part of it say at the eng go onto another site

    i want to hypewrlink a button in the movie to go onto my website how do i do that?

    It depends on which version of actionscript you are using.

  • How do you make an image a background image if the menu option is dimmed?

    I'm using the Cork Board template in a Pages layout document. I wanted to use the cork background in another page. Option dragging the cork image creates a copy in the new page. I can "Send it to back" but the Arrange->Send Object to Background command is dimmed. The problem is that "Send it to back" does not put it behind the header or footer so my page numbers are not visible.
    Oddly, if I just drag the cork image from one page to another, it remains a background object in the new page. Copying it causes it to come out of the background.
    Anybody have an idea why the Send Object to Background command is dimmed?

    In fact, my guess is that the cork.pdf object is a background object because it is a template transferred from Pages '06 to Pages '08.
    During the conversion, some properties are passed even if they aren't treated by the new version.
    If some one wish to let some of these items in the true background, as far as I know, the only available soluce is:
    create a new object from the delivered template
    unlock some items if necessary
    remove useless items
    lock back the kept item
    save the document as a template.
    Never change the background property of the kept items.
    As far as an item is a "true background" one,
    trying to move an other item to the background will leave it above the "true background object".
    Yvan KOENIG (from FRANCE mardi 9 septembre 2008 15:49:21)

  • How do you make a secure pdf form editable?

    How do you make a secure pdf file editable?

    The best way is to apply a digital signature to the file. Any other way can
    be manipulated quite easily.

  • How do you make new pages from a page so they have the first page in their address.

    I am talking about something like the adobe site.
    Like www.adobe.com/support/dreamweaver/whatever
    How do you make a page be under another like the dreamweaver page is a link from the support page.
    My goal is something like this.
    I have www.architecture.com/profile
    I need
    www.architecture.com/profile/Commercial
    www.architecture.com/profile/Residential

    If im understanding you correctly, you want the folder to have an automatic landing page. Ex. If your folder is
    "profile" you want the visitor to see the first profile page when they visit www.yoursite.com/profile. Correct?
    If thats what you need, name the page you want your visitor to see when they go to ex. www.yoursite.com/profile "index.html" or "index.php" ad save that file in your "profile" folder. When you're visitor will go to www.yoursite.com/profile the page you named "index" will open.
    Let me know if you dont understand or if its not what your trying to do.

  • How do you make room on your start up disk.  i am trying to do the update but don't have enough space

    how do you make room on your start up disk.  i am trying to do the update but don't have enough space

    Try this:
    1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
    2. Move desired movies and clips to trash, or your flash drive.
    *PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well.

  • How do you make images transparent in inDesign?

    How do you make images transparent in Adobe InDesign CS5.5?

    Dittco wrote:
    It IS possible: Select the image. Open effects (Window > Effects). Switch from "normal" to "multiply". Viola! White background is gone.
    That only works with a white background. In addition, it introduces a transparency effect, with its associated problems.
    With a rather light background: Select the image. Open clipping path (Object > Clipping Path > Options). Select Type > Detect Edges; use Threshold and Tolerance to get as close as possible to the edge of your image. This may be difficult because of a too low resolution image, or too much fringe on the edge -- if all fails, use the Inset Frame value to force the mask "into" the image. Click OK, and the background is gone.
    But that's not the only way: you can always create a clipping path manually, and then you are in total control, not limited by transparency side effects, auto-edge detection, and busy backgrounds.

  • How do you make it send an email on a condition? Or automate emails?

    How do you make it automatically send emails or even on a condtiion? (like qty left of inventory is 0)

    As far as making the report emailed conditionally, if the report is an exception report (only showing items with inventory = 0, for example), then you could add this to the report footer to prevent an email from being sent if no exceptions exist (basic syntax):
    WhilePrintingRecords
    dim noEmail as number
    if count({any field}) = 0 then  ' If no records processed...
      noEmail = noEmail / noEmail ' divide by zero failure prevents email from being sent
    end if
    This assumes that the data coming back from the database will only be exception records.  If that is not the case, then you'll have to manually count the number of records with inventory = 0 and use that formula field in the IF statement above.
    The down sides to this technique are that this will cause BOE to not generate anything (not even a blank report), and the status of the run will be Failed...
    HTH,
    Carl

  • How do you make a title just fade away

    I would like to put a still frame title into a clip, and instead of having it just be on the screen one second and a few seconds later instantly be gone, I would like to make the title slowly disapear into nothingness?  Anyone know how to do that?

    Yes, I'm very sorry. I keep forgetting that Encore and PPCS4 are separate programs. Yes, you do indeed create fading titles in PPCS4. I finally figured it out today. All that is necessary is to Put the new title on the timeline. Then place the timeline indicator bar, or whatever that thing is called, at the front of the title box on your timeline. Open up the effects control box, and expand the opacity box. Click the little diamond on the right side, and this will add a keyframe to the beginning of your title. Go to the end of the title box and click the diamond again to add a key frame to that end. Then just grab the keyframe on the right and pull it down. The title will disappear over the length of the time that it is on your screen.
    Thank you Hunt. Also thank you for the advice about the book. I do appreciate it.
    Terry Lee Martin
    Date: Mon, 10 Aug 2009 20:36:49 -0600
    From: [email protected]
    To: [email protected]
    Subject: How do you make a title just fade away
    Terry,
    I could be wrong, but isn't this something that one would do in PrPro?
    Now, if one wanted a Menu (in Encore) to "fade away," they could create (in PrPro) a Button Transition to do that.
    Good luck,
    Hunt
    >

  • How do you make a 2D line form the outline of a circle.

    How do you make a 2D line form the outline of a circle. I want a line to come in from the side of the screen and bend round to form the outline of a circle. In flash pro cc?

    you can use one tween to move your line from the side of the screen, then another (shape) tween to bend it into a circle.  you will probably need to use shape hints for the 2nd tween.

  • HT4111 how do you make the hippih keyboard pair with an ipad

    how do you make the hippih keyboard pair with an ipad

    I know this question is old but I just found out the real answer. After you turn on the little switch on the left side of the HIPPIH AppsKey Keyboard and the blue light blinks, I want you to look just above it.   Do you see that hole right above the word PAIRING?  Go grab a paper clip and press down in to the hole for about 2 seconds.   This sends a signal to the ipad and in the BLUETOOTH menu you should see "Keyboard" under DEVICES. Click on it and dialogue box will pop up asking you to put in a passcode for the keyboard.
    It took me way too long to figure this out.
    Stupid recessed button.

Maybe you are looking for