UCCE CAD server versions

Hi All
The UCCE software compatibility guide dated April 2010, allows for the CAD server version to be lower than 7.5(x) ( as low as version 6) when CUCM is 7.1(3), the compatibility guide for all 7.x releases on the wiki shows this not to be the case, in fact it states that for versions of call manager going back beyond version 6 it is only CAD server 7.5/7.6.
Can someone explain the difference?
BTW, we have a customer for whom we are deploying UCCE 7.5, who are using Windows 2000 desktops, strange but true, and CAD support for W2000 desktop ceases for version 7.5. but is supported on CAD server 7.2, which would be a nice fix to the issue
Thanks
Chris Higgins
Solutions Consultant
Cable&Wireless Worldwide

The wiki page is the official compatibility guide:
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_ALL_7.x_Releases
so, CUCM 7.X is only compatible with UCCE 7.5+, which means you need CAD 7.5/7.6.
HTH,
Chris

Similar Messages

CAD Server and Client Version mismatch

Hi All,
When we try to install fresh CAD client the version is different from the server. We are using 8.5.2a server and client shows 8.5.1. Any impact of this mismatch? How do we upgrade the client? Should we re-install the client?
Regards,
Adithya

Hello,
Anand is right but also you have to make sure that the server is willing to check the client for a update because you can turn it off or on, so in your case i think it is off.
To turn it on you have to launch the postinstall on the CAD server , go to the services configuration , you will find there a radio button for : would you like CAD automatic updates enabled? you have to choose yes.
In that case the Agent will check for a update when it is launched.
Amer

CAD Server Monitoring?

I am using CAD 9 with UCCE 9.
I am trying to figure out how to configure CAD Server Monitoring - Cannot use Desktop Monitoring as Clients PCs are old and NIC cards are not supported, even the IP Phones are ols and do not have BIB.
So SPAN is the only option. I need some guidance - even a document URK will do. I have read 'CTI OS System Manager Guide' and also 'CAD Install Guide' but none explains the config. I am confused about below the point:
- SPAN source are the phones - what is the destination - the supervisor PCs or the CAD Server? If the PCs, then do we need a SPAN for each supervisor PC or what?
If SPAN destination is the server, then how will the supervisors get the RTP stream from CAD to their PC - automatically or do we have to configure something specific?
Also, on the CAD Desktop Admin webpage - VoIP Monitoring Service - (see screenshot) do I select Default Monitor Service and Disable Desktop monitoring OR I can leave Desktop Service Enabled and it will not conflict with Server Monitoring.
And if SPAN destination is CAD server - I am planning to add a 3rd NIC card for this, but where do I select the NIC card for receiving/ reading these SPANNed packets?
Please Assist.
Thanks,
Kartik

UCCE SRND has a littel tid-bit about it:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab09/clb09/recordng.html
This blog post is for UCCX, perhaps this can guide you in the right direction:
http://wiklunds.wordpress.com/2012/06/03/uccx-8-5-cadcsd-call-recording-and-silent-monitoring/

UCCE CAD Workflow Assignments

I'm looking for a good method for auditing UCCE CAD workflow assignments. Currently, I have to open up the CAD Desktop Administrator and view every single agent to verify that they are assigned to the correct workflow group. Has anyone come up with a method for exporting this from CAD?

Yes, it's a problem when you have lots of agents you need to check. At one customer we have over 600 agents configured with 20 or so workflows (one per country) and it's a real pain to check.
I use the free LDAP browser from Jarek Gawor (version 2.8.2) and make an anonymous connection to the CAD LDAP like so:
Then export the appropriate part as a text file. Examine the text file with a decent editor or "grep" and check your assignments. Easy peasy.
Regards,
Geoff

What are the SQL server versions those are compatible with XI 3.0.

Hi All,
Please suggest,
what are the SQL server versions those are compatible with XI 3.0.
or with which SQL server versions XI 3.0 will interact using JDBC Adapter.

Check in the [Product Availability Matrix |https://websmp201.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=DISP_NEW&00200682500000002804=01200314690900000192]in market place for more information on this
Thanks
SaNv...

SharePoint Foundation 2010 supported sql server version?

Hi,
I am using SharePoint 2010 Foundation. I want to know what are all the SQL Server versions would support in SharePoint 2010 Foundation.
Could anyone tell me as soon as possible.
Thanks & Regards
Poomani Sankaran

It requires Windows Server 2008 SP2 or Windows Server 2008 R2. It will not run on a Server Core installation.
It requires one of these versions of x64 SQL Server:
                SQL Server 2005 SP3 CU3 (Build 4220) or greater (Note: SQL Server 2005 goes out of mainstream support in April 2011)
                SQL Server 2008 SP1 CU2 (Build 2714) or greater
                SQL Server 2008 R2
Check this blog
http://www.sqlservercentral.com/blogs/glennberry/2010/03/11/sharepoint-2010-and-various-versions-of-sql-server/
further from msdn
In order to maintain SharePoint and SQL Server compatibility we use the “SharePoint N-1
on SQL Server N+1” equation to determine version support. Using SharePoint Foundation 2010 as an example, the N release of SQL Server is 2008/2008 R2 and N+1 is SQL Server 2012. For Microsoft SharePoint Server 2013 the N release of SQL Server
is 2012 and the N+1 is SQL Server 2014.
https://technet.microsoft.com/en-us/library/cc288751(v=office.14).aspx

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How to find out Integrated weblogic server version

hi experts,
am using jdev11.1.1.5.0
i h'd big doubt ;)
how to find out Integrated weblogic server version
i think am using weblogic10.1.3. but am not sure?
so how can i found out.
this my log. but i dont see any info about version.
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\DevSuiteHome_1\jdk\jre\bin\classic;C:\DevSuiteHome_1\jdk\jre\bin;C:\DevSuiteHome_1\jdk\jre\bin\client;C:\DevSuiteHome_1\jlib;C:\DevSuiteHome_1\bin;C:\DevSuiteHome_1\jre\1.4.2\bin\client;C:\DevSuiteHome_1\jre\1.4.2\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Duser.timezone="+05:30" -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 17, 2012 5:50:39 AM GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Feb 17, 2012 5:50:40 AM GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Feb 17, 2012 5:50:42 AM GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00220. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Feb 17, 2012 5:50:42 AM GMT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Feb 17, 2012 5:50:48 AM GMT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:50:50 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log00102. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\access.log.>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Feb 17, 2012 5:50:56 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Feb 17, 2012 5:51:02 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application GeneralLedger is not versioned.>
<Feb 17, 2012 5:51:07 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application Rapppdf is not versioned.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00208. Log messages will continue to be logged in C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Feb 17, 2012 5:51:27 AM GMT> <Warning> <Server> <BEA-002611> <Hostname "rmsys0061", maps to multiple IP addresses: 192.168.0.161, 192.168.2.161>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.2.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.161:7101 for protocols iiop, t3, ldap, snmp, http.>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Feb 17, 2012 5:51:27 AM GMT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 51640 ms.
IntegratedWebLogicServer started.
[Running application frmtesting on Server Instance IntegratedWebLogicServer...]
[11:21:30 AM] ---- Deployment started. ----
[11:21:30 AM] Target platform is (Weblogic 10.3).
[11:21:31 AM] Retrieving existing application information
[11:21:31 AM] Running dependency analysis...
[11:21:31 AM] Deploying 2 profiles...
[11:21:32 AM] Wrote Web Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting\ViewControllerWebApp.war
[11:21:32 AM] Wrote Enterprise Application Module to C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\frmtesting
[11:21:32 AM] Deploying Application...
<Feb 17, 2012 5:51:33 AM GMT> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application frmtesting is not versioned.>
[11:21:40 AM] Application Deployed Successfully.
[11:21:40 AM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[11:21:40 AM] http://192.168.0.161:7101/frmtesting-ViewController-context-root
[11:21:40 AM] Elapsed time for deployment: 11 seconds
[11:21:40 AM] ---- Deployment finished. ----
Run startup time: 10812 ms.
[Application frmtesting deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/frmtesting-ViewController-context-root/faces/untitled6.jspxhttp://127.0.0.1:7101/console/login/LoginForm.jsp. it stated as weblogicserver 11g admin console
At the botton(copy right section) 10.3.5.0

Hi,
There is one more method,i know
Set the JAVA_HOME and PATH
then execute the
$WL_HOME\wlserver_10.3\server\bin>setWLSEnv.cmd
Go to directory which contains weblogic.jar ($WL_HOME\server\lib) and run below command
$WL_HOME\wlserver_10.3\server\lib>java -cp weblogic.jar weblogic.version
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255
Hope this will be helpful,
Regards
Fabian

Error when deploying application in wiblogic WebLogic Server Version: 10.3.

hi when doing deployment in my WebLogic Server Version: 10.3.6.0 am geitng this error
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false], [Extension-Name: oracle.jsp.next, exact-match: false], [Extension-Name: oracle.webcenter.framework, Specification-Version: 11.1.1, exact-match: false], [Extension-Name: oracle.webcenter.skin, Specification-Version: 11.1.1, exact-match: false].
how can i install this libraires in weblogic i have install this in jdeveloper by help->check updatesEdited by: adf009 on 2013/01/29 11:47 AM

Solution:
open the weblogic server console, in home page--> click the Deployments-->Select the adf.oracle.domain-->select target tab-->Click Lock & Edit-->
select the servers (admin and managed Server) and save.--> click Activate All changes.
Redeploy the application.

Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005

Hi All,
We are trying to create a replication between Sql server 7.0 data to SQL server 2005 data . We tried to create a local subscription in Sql server ,when tried to connect to publisher running in Sql server 7.0 it is showing an error message
like "This Sql server vresion(7.0) is not supported" .
Could any one please help us with this issue ?
Thanks
Sandy

Hi CRM_Learner,
SQL Server version 7.0 Service Pack 4 (SP4) is the earliest version that can participate in a replication topology with SQL Server 2005. We need to verify the version of SQL Server. If you configure transactional replication with updating subscribers,
for a SQL Server 7.0 Publisher, only SQL Server 7.0 Subscribers are supported. SQL Server 7.0, 2000 was out of support in the SQL Server Forums. I suggest you install SQL Server 2005 or later version to configure the SQL Server replication.
For more information, there is a detail about using multiple Versions of SQL Server in a replication topology.
http://technet.microsoft.com/en-us/library/ms143241(v=sql.90).aspx
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Mac mini server suddenly says 'server version not supported'

Just bought a mac mini server with Lion Server installed a couple of days ago and it has suddenly declared that the server version is not supported and will not allow me to re access the server from the Server App. I don't have any data that I need to recover as I am still experimenting with the set up. Is there away to reset this or do I have to do a clean install? Please advise if you can?

Exact same issue here....
mac Mini 2011 model.
came with Lion installed on it.
downloaded Server from the app store. installed and worked great.
updated the "server" to 10.7.1.
then i decided to delete the server.
now, when i try to re-install, it says server is not support.
its because the OS X client is now at 10.7.1 and the server install is looking for 10.7.0
i think i am going to have to re-install Lion client and try again.

Error trying to install ICM 8.0 - "FAILED TO GET SQL SERVER VERSION."

Hello guys, i tried to install ICM 8.0 but when i click on Setup.exe appears this error:
"FAILED TO GET SQL SERVER VERSION. MAKE SURE SQL SERVER INSTALLED PROPERLLY
NO INSTANCE NAME FOUND.NO SCHEMA UPGRADES ATTEMPTED"
I try to check the SQL COnfiguration, about Named Pipes, but everything is allright. Someone knows what is it?
Thank you very much.

You should be able to see the ICMSetup.log file somewhere - check TEMP. It seems to me that this is the first thing it does - tries to connect to the SQL database and ask for the version. Clearly it cannot. I assume you installed SQL OK, probably have the service running under a domain user created especially for the task, or the domain admin, and you are also logged in as the domain admin, and that SQL is running.
Check that log file for clues.
Regards,
Geoff

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

How to install and configure spatial web services (sdows.ear) of Oracle 11g R1 (Version 11.1.0.6.0) on Web Logic Server (Version 10.3.3.0)?

I need to deploy location based service (Directory Service and Route Service). My database is in Oracle 11gR1 (Version 11.1.0.6.0). The application is deployed on Weblogic Server (Version 10.3.3.0).
When I try to deploy the sdows.ear file, I get the error regarding class (oracle.spatial.ws.logger) definition not found.
The examples \ tutorials that I have found are either for deployment of sdows.ear on OC4J Application Server or they correspond to Oracle 11gR2 database based sdows.ear deployment on Weblogic
Server. As I am new in this field and inexperienced developer, I am unable to understand the causes of such error.
May I humbly request for the solution at the earliest.
Thanking you in anticipation.
regards,
GVJ

Hi,-
Sorry about the late reply.
We have patches for 11.2.0.3 and 12.1.0.1 database versions.
Please let me know if they will work for you.
Thanks

Do I need a server version or not?

Hi All
I am new to iCal.
I would like to use it as a shared calendar on our network in the office (4 users) to keep track of what each other are doing and to schedule tasks for each other. This means each user needs to be able to add New Events and New To Do's as well as display the Events and To Do's input by other users.
Does anybody have a solution to this problem or is the answer a server version? If so does a server version exist.
Thanks
David

Scott:
Your computer is equipped with dual voltage and your power supply will be fine. I suggest you get an adapter for the plug before you leave the US. I searched all over London once before finding one in a little hardware store (and ancient one at that).
Travel safely.
cornelius

UCCE CAD server versions

Similar Messages

Maybe you are looking for