UCCE SIP Dialer not active and PIM neither

Dear Networkers,
We have UCCE 8.5(4) installed.
We have configured and installed aSIP dialer. The issue is that the SIP dialer is not working and the PIM is not active.
From the Dialer process output I can see the following after enabeling the EMSDisplayToScreen :
18:02:48 Trace: Trying to connect to server: 17.20.10.80 on port: 44027
18:02:48 Trace: socket open on Server=17.20.10.80 port=44027
18:03:09 Trace: Error calling Connect(): 10060
18:03:09 Trace: Could not connect to either CTI Server A or CTI Server B
18:03:09 Trace: CTI Server configuration:
18:03:09 Trace: CTI Server A: 17.20.10.80, Port: 44027
18:03:09 Trace: CTI Server B: 17.20.10.80, port: 44027
From the MR PIM process output I can see the following after enabeling the EMSDisplayToScreen :
18:03:40 ADDED\UPDATED 0 PeripheralTargets on Peripheral 5008.
18:03:40 ADDED\UPDATED 0 PeripheralMonitors on Peripheral 5008.
18:03:40 ADDED\UPDATED 2 MediaRoutingDomain on Peripheral 5008.
18:03:40 Trace: Transport: appServerHostName1 = kbprcrmipc01a01
18:03:40 Trace: Transport: appTcpServiceName1 = 38003
18:03:40 Trace: Transport: appServerHostName2 =
18:03:40 Trace: Transport: appTcpServiceName2 =
18:03:40 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
18:03:40 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:03:50 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:04:02 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:04:11 ProcessPIMSetIdleReq: Peripheral 5008 going idle.
18:04:14 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=33).
18:05:11 ProcessPIMSetIdleReq: Peripheral 5008 going idle.
18:05:11 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=34).
For the Dialer process, I can see that the dialer cannot connect the CTI Server on the port 44027, but the CTISVR is active and working fine (CTIOS also).
For the PIM process, I can see that it couldn't connect to the dialer on the port 38003, but the configuration is correct.
Any help please ?
Thanks in advance.

Hi haouaswajih,
After referring to the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/outbound_option/outboundoption9_0/installation/guide/UCCE_BK_O4A87BBC_00_outbound-option-guide-for-cisco_chapter_0100.html
Step 10
On the last Outbound Option Dialer Properties dialog box , specify the following        information:
Outbound Option server: The host name or IP address of the Outbound           Option server. This server is typically the same machine where the Outbound Option           Campaign Manager is located.
CTI server A: The host name or IP Address of the machine that has           side A of CTI server installed.
CTI server port A: The port number the dialer uses to interface with           CTI server side A. The default is 42027.
CTI server B: For duplexed installations, the host name or IP Address           of the machine that has side A of CTI server installed.
CTI server port B: For duplexed installations, the port number the           dialer uses to interface with CTI server side B. The default is 43027.
Heart beat: How often the dialer checks its connection to the CTI           server, in milliseconds. The default value of 500 is acceptable.
Media routing port: The port number the dialer uses to interface with           the Media Routing PIM on the Media Routing PG. The default is 3800 to 3801.
Call Manager TFTP server: The host name or IP address of the           CallManager TFTP server. This server is the same machine used for the CallManager           publisher.
Could you please crosscheck the CTI ports being used\pointed here in your setup.
Hope this helps,
Anand
Please rate helpful posts !!

Similar Messages

Sip dialer is not active and mr pim

i installed call server--> router,ctoserver,ctios,pg,in pg1 agent pim, vru pim, in pg2 mr pim and dialer
data server -----. logger, aw
this is pcce setup details
agent pim,vru pim, cti server all servers are active
issue is mr pim is not active, dialer is allso not active,
mr pim logs
09:20:06:251 PG2A-pim1 Peripheral 5010 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
09:20:06:253 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:20:17:272 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:20:28:296 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:20:37:257 PG2A-pim1 ProcessPIMSetIdleReq: Peripheral 5010 going idle.
09:20:40:263 PG2A-pim1 Peripheral 5010 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=2).
09:20:40:267 PG2A-pim1 Peripheral 5010 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
09:20:40:269 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:20:51:294 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:21:02:316 PG2A-pim1 Attempting to connect to MR application at IP address 192.168.11.10 port 38001.
09:21:10:724 PG2A-pim1 ProcessPIMSetIdleReq: Peripheral 5010 going idle.
Dialer:
09:11:20:531 dialer-baDialer Trace: Attempting EMT connection to computer [192.168.11.11/192.168.11.11], port [40072]
09:11:21:531 dialer-baDialer Trace: Unable to establish an EMT connection:
09:11:21:531 dialer-baDialer Trace: error value [10060], text: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond

MR PIM id 5010, ip address 192.168.11.10, port number 38001, private and visible router interfaces is 192.168.11.10(call server)
in dialer ip 192.168.10.240, sip service port 5060, compain manager 192.168.11.11, cti server is 192.168.11.10, cti server port:42027, midia routing port:38001,
if i install dialer in data server dialer is active but mr in is idle, but in document sepcification should be install call server only, so i removed from data server again i installed in data server,
so i am facing sip dialer and mr pim not in active
i see pgagent is active, but pim is not in active

When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on. When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back. I never noticed this with os leopard, Just after i installed os snow leopard. All software is up to date only I think, thanks to apple they droped support for logic express. Thanks for any suggestions.

Does toggling CC off & back on bring it back?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

Enhancements is not active and cannot be transported

Hi All,
We are getting following error message when releasing a Transport request in CRM system which is on 7.0 version on MaxDB.
"Enhancements is not active and cannot be transported".
The strange thing is that the Tasks underneath are all released successfully , but only the TR is not getting released.
Also, the logs in transports do not point to which enhancement is not active as well.
Any help in this issue is highly appreciated.
Regards,
Murali Narayanan

Hi Murali,
Go to the enhancement and check the tables.fields,includes and it request nos.Go to that transport request ,double click on that see what and all there under it. Post if need help.
Regards,
Madhu.

SmartForm language EN is not active and has no errors

Hi All,
I am getting an error "Form 'My Form Name' language EN is not active and has no errors ". This a smart form that's currently working fine with an existing company code but when assign this form (form was not changed at all) to another company code and run the dunning statement, it give us the above error. The funny thing is that it is active but still gives us the error.
Does anyone have any idea why this is and what to do to resolve this.
Regards.

Hi,
Go into ur form in SMARTFORMS t-code............
In form attributes u have 3 radio buttons right
select translate into all languages option and activate it...........
Don't check the 2 check boxes right to dat.....
Cheers,
jose.

HT201441 where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

where and how can i find his id to contact him if the device is not activated and idon't know how to riech him

i will have to agree with hasscoo90. we badly need help how to contact the owner of this phone. we do understand the purpose of activation lock. and this is why instead asking Apple or any other company that offers a service (if there is any) to remove the activation lock for us, help us provide any contact information of the owner of this serial number we have and we will inform them of exactly what to do so that we can already use this iphone.
please help us. we really badly need your help.

Form Z_FIDUN_A language EN is not active and has no errors

Hi Everyone,
I have copied one Smartform from 4.6C to ECC 6.0. and i have activated that Smartform in ECC 6.0. when i tried to print it is giving me the error "Form Z_FIDUN_A language EN is not active and has no errors". I have activated it in EN only.
Please help me.

Hi Leela,
Try running the FM generated for the SmartForm and resolve any errors that might occur.
Or Else
the issue must be the customising where the Business Events are trying to call SAP Scripts and not Smartforms.
Let me know If you require more help on this.
Edited by: Raj on Oct 29, 2010 1:37 PM

Form Program Name language EN is not active and has no errors

Dear all,
I'm new to SAP development. I have copied the standard RLVSDR40 and made some modification on it. When i tried to print in lt31. I encounter the following error:
"Form <program name> language EN is not active and has no errors".
Any idea about this?? What is the standard procedure of this kind development??
Regards,
Kit

hi
first go to SE71 and give Form Name and Original Language of the form and copy it to zform.
Now open this Zform in change mode and go to Utilities-> change original language to log on language here EN in your case-> and save it.
Now your Zform is in language EN note tat now when you are opening your zform to modufy you might be trying to change it in DE so change language to EN and then modify it.
After making changes go to NACE transaction to assign this zform to transaction you are using.
Nace->choose application->output type->choose your output type->Double click processing routines->you will find one column pdf smartform/scriptname-> here give your zform name
It will surely work if not get back to me

Form ZF_J_1IEWT_CERT language EN is not active and has no errors

Hi,
i got the following Error while Posting of With Holding Tax Certificates for a vendor through T-Code J1INCERT.
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Please help.....
Thanks
Rashmi

Hi Rashmi,
In EWT there is a standard form for withholding tax certificate is J_1IEWT_CERT and your organization has created a new from name ZF_J_1IEWT_CERT . Just ask your ABAPer if this form has been activated and maintained properly.
Contact your ABAPer will solve the issue.
Regards,
Chintan Joshi.

''Form zrk_test language EN is not active and no error''

hi all
i am getting following error ''Form zrk_test language EN is not active and no errors'' ...........while executing a program.....
plz help..
Rohit

You will need to active your SAPscript. Transaction SE71, enter ZRK_TEST, click Change. Then choose Form -> Activate.
Regards,
Nick

Form zform4 language EN is not active and has no errors

after executing a program calling script , it gives the following error after clicking print preview : Form zform4 language EN is not active and has no errors .
pl find solution.

Moderator message - Welcome to SCN.
Have you tried activating the form (in SE71)?
Rob

Smartforms: u201C Form zFORM language EN is not active and has no erroru201D.

Dear friends
I am trying to see print preview via tcode LT31 for picking list but getting error u201C Form <zFORM >language EN is not active and has no erroru201D.
Any idea for this?
Regards
Pawan

HI Abhijit,
Thanks again for your reply, it is true, my form is in active status and showing above message actually I checked the form via menu option then reactivated a few times still I am getting the same error message, this form was working properly till yesterday but when I removed some unwanted text form Table-LINE, and also I removed some comment in code part in initialization. From then I am getting this message while generating print preview ......my guess there will some error in forms which system is not able display via menu option Form -> Check.
Is there other option to check smartforms? I will recheck the form again where I made last changes.
Regards
Pawan

Webgl is not activated and no option even to do so....

Hi guys Webgl is not activated and hv no option to so.... No safari menu , preferences

WebGL is not supported in iPad Safari.

Itunes card not activated and noone seem to be able to belp

I have been dealt with 8 different people.
I tried activating my itunes card through online process back in Dec 16, 2013. Follow# 304731545 - junayed, nothing from him until
Jan 3- i emailed for update - "Your inquiry is very important to me, so I have requested assistance with the issue you reported. You will receive an email after the matter has been investigated and further information is available."
Jan 4- " I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance."
THAT WASN'T MY ISSUE.... THE ITUNES CARD BEING NOT ACTIVATED NOT THE ITUNES STORE. I replied advising him again what issue is and sent him AGAIN all the attachments he needed.
Jan 6 - "Jaimy, we are sorry for the inconvenience. As per the Apple policy, we are unable to process your query any further. I would like to request you to contact the Apple store from where you have received the gift card." (I did in jan 10th)
- the same day i called explained my situation and was transfered 554529946 - chanile, she was nice seemed she was trying to help me but we got cut off. She didnt call me although she knew my number.
I called again 554616314 (didnt get his name was again nice) advised to make another claim online.
So I did 308483126- ajitesh. Submitted the receipt and picture of the card.
Jan 7 - same email like junayed asking " I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance."
Jan 10 - finally decided to go to the store (45 mins away with the winter driving conditions). I asked a guy to help and i was directed to someone else. I believe his name was scott. Told him my situation. He said he cannot help because it was outside the 30 day from purchase. Adv to call because nothing he can do, he didnt even bother to look into my situation.
Jan 11 - i called, spoke to a lady, about 40 mins later i was transfered to a gentleman. All in all 53 mins later, online is the only way to go about resolving this. Even thought Junayed had already said he cannot do anything and go to the store.
I am so helpless and disappointment at the level of customer service. The effort i have to put in to getting an issue resolved.
Noone seem to know how to help me other than "online" when the "online" had asked me to go to the store, which then advised me to call, which then advised me back to go "online"
Can anyone help??????

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If the store that you bought it from can't/won't help then only iTunes Support can potentially do so. When you've been contacting online support you've been referring to your case numbers and what you've been told each time ?
And this is the link that you've been using : http://www.apple.com/support/itunes/contact/ , clicking on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

On my CC Photography pla, my Lightroom is not active and requires an activation key. Why should I have trouble with this when it is part of the plan. I have already lost 4 days of use on this package because of the inactive Lightroom portion. I need to g

Can anyone help with CC photography plan activation, when tBridge and photoshop are active and Lightroom requires a key . I have even applied the key to no avail.

Have you downloaded the perpetually licensed version of Lightroom or via the Cloud?

UCCE SIP Dialer not active and PIM neither

Similar Messages

Maybe you are looking for