UCCX 10.5 - newly created agents can't login to CAD

Hello,
After upgrading UCM 8.6 to 10.5 and UCCX 8.5 to 10.5 I can't add new agents. I have installed second UCCX and reused CTI and RMCM users, registered CIPC, created end-user, configured IPCC extension and set CIPC in controlled devices on end user and rmcm user. DN is not a shared line. When I try to login to CAD it asks to associate the phone with RM JTAPI provider user. Agents created before upgrade works fine. I see the following traces:
120643: Aug 08 16:46:18.387 MSK %MIVR-ICD_CTI-7-UNK:ClientConnMgr: Processing msg on socket:Socket[addr=10.1.9.66,port=62888,localport=12028] Msg is {length=71 type=SET_AGENT_STATE_REQ,invokeId=47,agentState=LOGIN,eventReasonCode=1,forcedFlag=False,agentID=m.denisov2,agentDN=1900,agentPwd=***** }
120644: Aug 08 16:46:18.388 MSK %MIVR-ICD_CTI-7-UNK:This connection is using encrypted passwords for agent login message
120645: Aug 08 16:46:18.401 MSK %MIVR-SS_RM-7-UNK:Processing msg: CTISetAgentStateReqMsg (Rsrc:m.denisov2 InvokeID:47 State:LOGIN Forced:False)
120646: Aug 08 16:46:18.401 MSK %MIVR-SS_RM-7-UNK:Agent m.denisov2 is outbound capable.)
120647: Aug 08 16:46:18.401 MSK %MIVR-SS_RM-7-UNK:Rsrc: m.denisov2 Contacts:
120648: Aug 08 16:46:18.401 MSK %MIVR-SS_RM-7-UNK:Rsrc: m.denisov2 PrevState: UNKNOWN PrevStateSet:false
120649: Aug 08 16:46:18.401 MSK %MIVR-SS_RM-7-UNK:Rsrcs in ARL of ESD RU-MSK-DIRECT_SALES:
120650: Aug 08 16:46:18.697 MSK %MIVR-SS_RM-7-UNK:Trying to authenticate agent m.denisov2
120651: Aug 08 16:46:18.880 MSK %MIVR-SS_RM-7-UNK:Processing msg: class com.cisco.wf.subsystems.rmcm.msgs.UserAuthJobResponse Rsrc:m.denisov2
120652: Aug 08 16:46:18.927 MSK %MIVR-SS_RM-7-UNK:Rsrc: m.denisov2 New State:LOGOFF Old State:LOGOFF Reason code:1
120653: Aug 08 16:46:18.927 MSK %MIVR-SS_RM-7-UNK: The mapping SEP902B34750ED4-m.denisov2 has been added
120654: Aug 08 16:46:18.927 MSK %MIVR-SS_RM-7-UNK:Terminal SEP902B34750ED4 IPv6 Address is NULL
120655: Aug 08 16:46:18.927 MSK %MIVR-SS_RM-3-LOGIN_FAILED:Login of resource failed: Module Name=RM component,The description of a message sent from/to the RM=CTISetAgentStateReqMsg (Rsrc:m.denisov2 InvokeID:47 State:LOGIN Forced:False),A specific description for a trace=problems in JTAPI or CM
120656: Aug 08 16:46:18.927 MSK %MIVR-SS_RM-7-UNK:Posting msg CONTROL_FAILURE_CONF Socket:Socket[addr=10.1.9.66,port=62888,localport=12028] invokeID:47 failureCode:CF_GENERIC_UNSPECIFIED errorCode:88001 text:Unable to login agent due to problems in JTAPI or CM in CTI Server's message queue
120657: Aug 08 16:46:18.927 MSK %MIVR-ICD_CTI-7-UNK:OutboundMsgProcessor: got message: { CONTROL_FAILURE_CONF }
120658: Aug 08 16:46:18.928 MSK %MIVR-ICD_CTI-7-UNK:OutboundMessageprocessor : sending msg : { length=-1 type=CONTROL_FAILURE_CONF,invokeId=47,failureCode=CF_GENERIC_UNSPECIFIED,errorCode=88001, text=Unable to login agent due to problems in JTAPI or CM to socket: Socket[addr=10.1.9.66,port=62888,localport=12028] }
120659: Aug 08 16:46:18.928 MSK %MIVR-ICD_CTI-7-UNK:MsgHandler : Sent : { CONTROL_FAILURE_CONF to Socket[addr=10.1.9.66,port=62888,localport=12028] }
I have tried to disassociate and associate the phone with rmcm user and even rebooted UCCX, how can i troubleshoot this problem furher?
I use IPv4 only, what means line 120654, is it normal?
Regards,
Maxim

I have installed second UCCX and reused CTI and RMCM users,
It sounds like the upgrade is irrelevant here, and what we're really troubleshooting is your second UCCX installation which is using the same accounts as your first UCCX installation.
Of course, I've been around long enough to know that communication breakdowns are common, and you may have not meant that.
For example, maybe what you meant was, you added an HA node? But if not, and you really installed a new instance while reusing the existing credentials, I would suggest creating new app users for your new UCCX and not sharing them.
PS It's very hard for me to read your log snippet with the black background. Could you edit your post and remove the formatting please? Thanks.

Similar Messages

UCCE 7.5 - CAD 7.5.1 Agent can not login

Hi everybody,
We're using CAD 7.5.1 for UCCE 7.5.
Currently an agent complait that she can not log in to the CAD due to the error of delay time out. I did a test with her account and here is what I found
- CAD got stucked in the "connect to CTIOS server" step then timeout.
- Her IP Phone is the only one that has this problem. Tested with another IP Phone and they work. Her SEP is well associated with the PG user though.
- Randomly, CAD works. Upon reopening the CAD and trying to reconnect, it stucked again.
I include here the CAD log, hope that helps.
03/14/11 15:48:50.096 30096 agent Thd(32244) [agent.5000.4729]::OnQueryAgentStateConf()
03/14/11 15:48:50.096 30096 agent Thd(32244) ObjectId = agent.5000.4729 , Enablement Mask = 1000000
03/14/11 15:48:50.096 30096 agent Thd(32244) CCtiOsSession::OnEvent( eAgentInfoEvent ), EnablementMask = ffffffff
03/14/11 15:48:50.096 30096 agent Thd(32244) CCtiOsSession::OnEvent, (AgentID:4729 AgentLastName:OUFKIR
AgentFirstName:Sanaa UniqueObjectID:agent.5000.4729 MessageID:eAgentInfoEvent
SupervisorKey:(null) LoginName:sanaa.oufkir)
03/14/11 15:48:50.096 30096 agent Thd(32244) [agent.5000.4729] eAgentInfoEvent
03/14/11 15:48:59.002 30096 agent Thd(32244) CCtiOsSession::OnEvent, Event(eOnNewSkillGroupStatisticsEvent) is blocked.
03/14/11 15:49:09.690 30096 agent Thd(32244) CCtiOsSession::OnEvent, Event(eOnNewSkillGroupStatisticsEvent) is blocked.
03/14/11 15:49:20.097 30096 agent Thd(32244) CCtiOsSession::OnEvent, Event(eOnNewSkillGroupStatisticsEvent) is blocked.
03/14/11 15:49:30.487 30096 agent Thd(32244) CCtiOsSession::OnEvent, Event(eOnNewSkillGroupStatisticsEvent) is blocked.
03/14/11 15:49:39.847 CTIOSTrace - CConnectionMonitor::MonitorThread, Connection (agent.exe_30096_27384) Abandoned
03/14/11 15:49:39.847 CTIOSTrace - CConnectionMonitor::RemoveClient, Removing Connection (agent.exe_30096_27384)
03/14/11 15:49:39.847 CTIOSTrace - CConnectionMonitor::MonitorThread, Posting Quit Message
03/14/11 15:49:39.847 CTIOSTrace - WndProc(WM_DESTROY)
I suppose we have a IP Phone defect since it's the only one that had the problem.
Someone experience the same thing before? Any comment is welcome.
Thanks,

@Geoff:
Thank you for all the good sugesstions, however unfortunately none of them is possible to me
I would try this using the CTIOS client on your test machine, just to eliminate CAD a little. From the trace, it doesn't appear to matter, since you are looking at the pure CTIOS trace messages, and they are the issue - but I like CTIOS for this sort of debugging.
--> We are using CAD and do not have CTIOS client installed. Does the soft actually come with the UCCE installation package? Can you please tell me where I can find it?
@Geoff and Ed
Dissociate and re-associate the device with JTAPI and retest.
--> Good point, I did the same actually but the phone still didn't work.
Nevertheless, I really think we have a network problem (which was observed time to time before)
I will update this thread as soon as I can do some further tests.
Thanks,
Regards,

UCCX Agent can`t loggin

My UCCX is 8.5 su3 ,CME is 8.5.When the IP phone agent loggin ,the screen display "The extension you entered is not associated with this agent ID. Verify the extension and try again"
The CME config in the Attach file.
I have creat agent on UCCX server.
I have read the Cisco Unified CallManager Express System Administrator Guide,Cisco Unified Contact Center Express Solution Reference Network Design Guide.But I can't find out how to handle this problem.

Hi,
I hope you are using the compatible CME IOS image,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
->Details of CME/IOS version mapping can be found at
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
->Only SCCP Phones are supported as Agent Phones with Unified CME. Refer to "Cisco Unified IP Phone Support" section from the respective Cisco Unified CME
Supported Firmware, Platforms, Memory, and Voice Products web page. For example, for Cisco Unified CME 7.1, go to: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme71spc.htm, and scroll down to view the "Cisco Unified IP Phone Support" table.
c. Cisco IP Phones 6911, 6921, 6941, 6945, 6961, 8961, 9951, 9971 are not supported as Agent Phones with Unified CME
If everything is ok and you are still facing the issue, than I would suggest you to appraoch TAC for further help.
Thanks,
Anand

Why can't I create a new version of a photo edited in an external application, without Aperture making a new copy of the newly created Tiff?

When Aperture creates a new version from a RAW file, no new master file is created. This makes total sense and I understand why.
When I edit a photo in an external editor (Photoshop CS6) from within Aperture, Aperture creates a Tiff file to edit in Photoshop and saves it along with the RAW original once I have finished editing it in Photoshop. I understand why this is necessary too. So far so good.
But if I then ask Aperture to create a new version from the newly created image edited via Photoshop, it creates another new Tiff. I can't see why this is necessary. Aperture should be able to apply further new Aperture edits to the newly created Tiff in the same way that it creates new versions from a RAW file without duplicating the master - by remembering any new 'recipe' changes applied to the Tiff. It only needs to remember the edits made as the Tiff already now exists.
Can I stop it creating repeat Tiff files each time I create a new version from the Photoshoped photos?
Thanks in anticipation.

Hello Kirby,
I clicked on the 'Show in Finder' and it revealed a new file called IMG_0961 (1) which goes with the original IMG_0961.CR2 and the edited new tiff created for Photoshop which was called IMG_0961.tiff
I noticed also that a separate version I had previously created using Canon's DPP stand alone software and titled by me IMG_0961 (DPP).TIF (same thing but from a different original) does not form a new master file when I create a new version of that one. I've tried this with a few images but when the original is edited in Photoshop via Aperture a second version of the Tiff is created for the 1st version of the image when I create a new version fo it.

How can I add a photo to a newly created photo book it the photo wasn't in the album I made the book from? thnx

how can I add a photo to a newly created photo book it the photo wasn't in the album I made the book from? thnx

Drag it to the book project in the source pane on the left
LN

How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

Olly,
I'll be picky here on nomenclature ;-)
Tables and other Obects can be locked, but Sheets can't be locked.
If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
Jerry

Why can I not see any newly created 'Groups' in 'Work Group Manager' on the client Mac at login?

Hi. Now, this issue has not been resolved since 10.6 Server. I have now upgraded to Mountain Lion and the issue still persists. I used to easily create Workgroups/Groups in 'WGM' and they would appear at login for those users who were part of that group. As it stands the old created groups appear ok and can be accessed selected at the point of logging in. The newly created groups don't show up at all. They all look good to go when looking at WGM. I have tried removing the Users from the groups and adding them again but there is no change. It is getting me so frustrated!
Why is this happening? Is there a quick fix for this?
Any help will be gratefully appreciated.

Hi. Now thats a hard one to pin point exactly. I guess you mean Archiving the OD and exporting users and groups etc Yes this happened when we upgraded from 10.5.8 Server to 10.6 Server.
How do I go about fixing this in Mac OS X Server 10.8.4? Do I have to go through all that again? Will I lose any settings in doing so?
Thanks in advance.

Can I use Solution Builder on newly created Client?

Dear Experts,
I have an existing SAP system and I created new client via SCC4 without doing any client copy (means it's blank).
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
regards,
Abraham

Hi Abraham,
Can I logon to the newly created client via SAP* (since there's no other user id) and run Solution Builder to activate those SAP best practices Building Block? Will that affect other existing client (what I mean, will there be a cross-client customizing?
Yes, You can login to newly created client via SAP*. However, running or activation on empty client is not advisable.
Please copy the Newly created client from 000 or 001 and start the activation.
Refer to below link for SAP best practices Activation.
http://help.sap.com/saap/sap_bp/HCM_ERP605_US/html/installation_page_EN_US.htm
IMPLEMENT - Solution Builder Simplified path to activate SAP Best Practices.
Graphical scenario selection; Standard scope templates
http://help.sap.com/bp_dm603/BBlibrary/General/SAP_Best_Practices_overview_EN.ppt
Regards,
Sravanthi

How can i add newly create infotype in t.code po13

Can any one pl tel me how can i view newly created infotype in t.code PO13
Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

See:
Mac OS X Automation,
Automated Workflow Tips,
Introduction to Automator tutorial, and
a four-parter on Automation in Snow Leopard by Sal Saghoian:
Snow Leopard Services,
Services for iPhoto,
Safari and WebKit integration, and
Installing and using services.
Finally,
Developing AppleScript Applications and
Apple's Automator Developer Documentation

Why can't I store files in a newly created folder?

Every time I use the option Save As (from Internet downloads or "Save Image as" on web pages) and try to store it in a newly created folder, this new folder can not be selected. I have to use a trick to select some other folder first (like its parent) and then navigate back to this new folder. Why is that?
T.
iMac 20" Intel Duo Core Mac OS X (10.4.6)

OK. Got it! Went to the original folder instead of the alias. Changed the admin privileges to "Read & Write" and, Whala! Now I don't have to enter my password every time I want to add, delete or replace a file in my Utilities folder.

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)? Thank you!

>> then I get a completely blue screen.
That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
And sure enough, your video card driver is almost 2 years out of date.
Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

Newly created user accounts can't log in??

I've got a 5 year old who is starting to use my computer for game playing, typing notes, and simple web stuff.
I want to set up a user account for him with parental controls so he can't randomly rename, delete, or change things.
I've followed the directions, set up a user account, given it a password... logged off my admin account ...
and when I click on his login picture, it brings up the password window, and when I input the password, it just gives a little shake, clears the password line, and lets me try again.
I've deleted that account and created a new one without parental controls. I've tried having NO password in the password line. I've tried making sure the short names for the accounts I'm creating are exactly 8 characters. I've turned off Norton antivirus. Nothing works - I cannot log in with any newly created account??
What else can I try?

Sara
Well you probably don't need to be told the NetInfo database is in a bit of a mess, but the significant thing is the "No such file or directory" from the last two commands. Basically this is where passwords are stored (encrypted) since the system changed to "Shadow Hash" passwords in 10.3.
Your account seems to be OK since it predates this change, and when you installed new system versions you chose the "Upgrade" option which left your settings alone. This is why your primary group is 'staff', or 20, whereas for Will it is creating a group 'will', or 502. That bit appears to be working, just not the passwords. Your password still works because it is in the old 'passwd' file (in encrypted form).
By far the best thing, at this stage, would be to do an Erase and Install, but this depends on you having a complete and up to date backup of all your files. See Mac OS X 10.4: About installation options. Alternatively you might try an Archive & Install, see Mac OS X : About the Archive and Install Feature, probably not choosing the "Preserve Users and Network Settings" option. But note this requires you to backup a lot of your data, and then re-enter settings and so on.
If you have a backup, the Migration Assistant can help you get your files back in place.
If it were my machine of course, I would probably carry on a bit longer trying to fix things, but the appearance of "#NoValue#" twice in the NetInfo output suggests some serious inconsistency which would be difficult to fix.
Let us know how you get on, and Good Luck!

Can I use my newly created iCloud email address as my Apple ID?

Hey,
I know there have been loads of post regarding iCloud and account issues. I was wondering if it was possible to use my newly created iCLoud email address as my Apple ID and its primary address. I had a hotmail account as my Apple ID before signing up for iCloud. For me it's purely cosmetic and I want to retire that hotmail address.
Thanks
Peter

this has been really bugging me as well, i dont see why we cant do this.
if you create a new apple id you get the option to use a free icloud email as the apple id, but old users are stuck?

I cannot get rapidweaver5 to upload my newly created website. It keeps giving me the same error message "*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument"... Can someone tell me why?

I cannot get my newly created site to upload using rapidweaver5. I keep getting the following message...
*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument
I have checked the info in the bookmark info to be correct so I cannot understand why this is not working
Dave

I cannot get my newly created site to upload using rapidweaver5. I keep getting the following message...
*** -[NSFileManager fileSystemRepresentationWithPath:]: nil or empty path argument
I have checked the info in the bookmark info to be correct so I cannot understand why this is not working
Dave

Unable to Silent Monitor newly configured agent via SAD

Unable to silent monitor newly configured agent via SAD (supervisor agent desktop).....attached is a screen shot of the error messages.
I have verified the following -
- agent is able to log in successfully...
- supervisor is able to see the agent via realtime report etc...
- agents that are being monitored successfully, has the same NIC card and are on the same vlan as the new agent...
- I am able to see the new agent extension and mac address under VoIP monitoring device in the CDA (cisco desktop administration)...
Please advise, thanks -

There is a utility in the newer releases of UCCX that is included with CAD on the agent PCs that can help narrow down the cause of this problem. On the agent PC, navigate to C:\Program Files\cisco\desktop\bin and you will see NICQ.exe. Run this utility while the agent is on a call. This utility captures packets on the NIC and verifies that the PC is receiving packets from the phone correctly.
If this tool reports that it cannot find an RTP stream, it's best to focus on the agent PC and their phone configuration. On some phones, you may need to disable the advertise G722 codec, because this is not supported with CAD monitoring/recording yet. Also, even though the MAC address shows up correctly in CDA for their extension, it's important to make sure the extension is only used once in CUCM by searching the route plan report. Otherwise, the VoIP Monitoring service may receive the wrong device's MAC address when trying to filter for the RTP stream.
Make sure the PostInstall tool on the agent PC has the correct NIC selected to capture traffic on. This is important when the agent PC has more than one NIC installed. This utility is also in C:\Program Files\cisco\desktop\bin on the agent PC.
If the phone seems OK but the problem remains, you can isolate it to a PC by connecting the agent's phone to another PC, like the PC of an agent that can be monitored. If the non-working agent can be monitored using their own login to CAD and their own phone on the other agent's PC, then it's just a matter of finding differences between the two PCs that can lead to the problem.
Thanks,
Brendan

UCCX 10.5 - newly created agents can't login to CAD

Similar Messages

Maybe you are looking for