UCCX 10 open and close over-ride

I am trying to find a way to into create a script to have it so that an supervisor can call a number and over-ride to close or open option.
does anyone has a sample script to share?
thanks

There are many posts on this topic here, and some good script examples here:
Cisco Unified Contact Center Express Script Repository 9.0(2)

Similar Messages

Ichat opens and closes repeatedly then shows an error

When I go to log into Ichat, it opens and closes over and over again until finally an error comes up saying that I tried to log in too many times, and to try and log in again later.
However, after a few minutes, it still does not let me log in.. Please help !

I looked further into the discussions and found this thread. I tried it and it worked. It might work for you.
http://discussions.apple.com/thread.jspa?threadID=1825154&tstart=60
Good luck!

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Project Takes FOREVER to Open and Close

We have a large RoboHTML project that outputs to a WebHelp
system. The version of RoboHelp is X 5, possibly a version after
that, I think - but dated 2004. Two of us share this project, but
we don't use Version Control. The size of the project is about 45
MB, and includes several subfolders of topic HTMs. My coworker has
the same issues, possibly a bit faster than what I have, but still
excessive Open and Close Project times.
It takes an extremely long time to open, like about 10
minutes or more. When I select to Close Project, the CPU Usage
shown in Task Manager is up to 100 % and stays there, so the
closing process is maxed out and frozen, and obviously isn't happy.
Even when I close other applications, the project can take over 30
minutes to close - no error messages, just hourglassing. While I'm
using the project, it doesn't max out. There have been times when,
as much as I hated to do it, I had to do an End Task with Task
Manager because the project wasn't closing (and I had to leave).
Also, note that the CPD file of this project is over 4 MB. I
just was reading about deleting the CPD file, so I plan on doing
that.
I'm not sure of any more details I can provide. While I'm
working on the project, there are usually no freezes or response
time problems. Just the extremely long Open Project time - and even
longer Close Project time.
I would so appreciate any solutions or ideas. Thanks!!!
Susan

Update - I deleted the CPD file, and it opened a lot faster!!
It also closed in a reasonable amount of time - however, I did not
work in the project for a while before I closed it. So we'll see
what happens when I close it at the end of the day.
So, the deletion of the CPD file may have solved the problem.
However, if anyone wants to offer feedback on this possible
solution, I would appreciate it.
Thanks!
Susan

Main VI stops fucntioning after i open and close a subvi from an event structrue.

Hi,
I am trying to open a pop up vi from an event. I have been struggling with this for a while now. When i open a pop up vi and close it, the main vi stops running properly.
I have narrowed it down to the fact that the event which calls the subvi never finishes when the subvi is closed.
The attached image is an example of what I am currently doing. When I run this, i never see the dialog box that says 'here'
maybe useful as a hint to the problem...
This does work properly if I run the vi, click to open the subvi, close the subvi, (here the main vi is not working properly, cant click anything) then stop the main vi, run the main vi again, open and close the subvi, and then i see the 'here' dialog, and my main vi functions properly.
thanks
J
Solved!
Go to Solution.

What is actually happening is you hit the Ok button and your panel closes and you set the Stop 2 to True. Ok, that is fine except for the fact that the Stop 2 terminal has already been read during that iteration of the loop. So the loop will go again. This time is has read the Stop 2 at a TRUE, but the event structure needs an event before the loop can complete. But the front panel has been closed already and you are stuck.
As Dennis said, get rid of the Stop 2 and just wire the TRUE constant straight out of the event case. Wire a FALSE for all of the other event cases.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Globally open and close all accordion panels

Is there a way to globally open and close all accordion
panels? For example, it would be nice to have an "Expand all" and
"Collapse all" link at the top of the page, before the accordion,
that has this functionality.

Hi FM_n_DC,
Accordions can only ever have a single panel open. If you
want individual control over which panels are open you probably
want to use a CollapsiblePanelGroup. This sample shows how to open
all and close all of the panels of the CollapsiblePanelGroup:
http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html
--== Kin ==--

Why would Siri open and close randomly?

My iPhone 5 displays the oddest and most erratic behavior and I cannot figure out why! Hopefully someone here can head me in the right direction!
A few times a week, Siri will pop up with her "What can I help you with" window. I'll close it and it will reopen again. Sometimes it even causes other apps to open. Open and close. Over and over. It happens randomly or at least I cannot see the common denominator anyway. I use a bumper with my phone but it does not cover or even touch the screen button.
Any ideas?
Thanks for the help!
Peter

It is possible that you are pressing the home button while the phone is in your pocket. If this is not the case then plug your phone into your computer and use iTunes to restore your phone. Also restore as a new iPhone not from backup.

Would you Open and Close DAQmx tasks within a function or Globally

Hi Guys,
This should start something.
The subject is DAQmx Tasks.
If you were writing a function that is called many times, say MeasureVolts (double *Value) to obtain a reading from an Analogue Input Channel.
Would you.
1. open and start the task inside the function, do the measurement and then close the task inside the same function.
or
2. open the task globally and later do the measurement inside the function using the global task then close the task only when the application is closed.
I am mostly concerned with the overhead of task generation and closing, what do you guys and girls out there do?? and what is the general opinion?
I would appreciate your views.
Regards
Paul.

I would definitely NOT keep configuring and clearing (I think that's what you mean by open and close) the same task over and over. I would configure once, read many times in my main app, then stop & clear once.
I typically like to package such data acq into an "Action Engine" that keeps track of its own DAQmx task id so I don't need to sling that task id wire around into multiple parallel loops / vi's. Attached is a very stripped-down example for Digital Input.
I would typically do more with error testing and would make the "Action" enum into a typedef custom control, but this gives you the basic idea. The action engine approach works very nicely when there's a small # of different kinds of input parameters and output info needed to support all the necessary action cases. When you start needing a large number of differnent kinds of inputs and outputs to support the desired actions, then you start having difficulty with (1) having enough terminals to wire and (2) remembering which inputs and outputs are meaningful for which actions.
-Kevin P.
Attachments:
DI Action Engine.vi ‏75 KB

Motion 4: open and close a group with key shortcut?

Mo4: Layers window: any shortcut to twirl down (and/or up) all the layers in a group? Or layers in layers? The manual says arrow keys move from group to group,layer to layer and that works... also says that L & R keys open and close selected group/layer, my LR arrow keys don't do anything...
Thanks, John

No, actually you do not - you need to click the helpful or solved buttons over their post in order to give them credit.
And what you do by assigning a helpful or solved (helpful is 5 points, solved is 10) is to build their reputation here. Not a bad thing to do for those who help you...
Patrick

IPad mini acting strange. Apps open and close randomly. Any ideas?

My iPad mini acts strange. Apps will randomly open and close and I have no control over it. I have reset it to factory and started all over but it is still doing it. Any ideas on what I should do?

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Finder repeatedly opens and closes in my PowerBook G4

I have been wrestling with this problem for some time. Finder repeatedly opens and closes in my PowerBook G4. When I log in to my Administrator Account, the Finder will repeatedly open and close with a rainbow spinner till the whole system freezes. I have reinstalled the OS and the problem returned. Now, I need to get my files on that account backed up and start over again. The trouble is that I can't access the files because the Finder isn't accessible. I've created a 2nd account, and am in the process of trying to copy the files I need to the new profile, but so far those files are barred. My main concern is why is this happening, and will it happen again if I reinstall? What's the best way to reinstall and start over?

If the second account is an admin one and since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

Playbook opens and closes apps randomly, constantly

I have a 32gig playbook that all of a sudden has gone haywire. The screen goes nuts like someone is inside playing around, apps open and close randomly to the point I can't do anything. I've tried reseting, 3 button reset, managed to do a security wipe but nothing helps. It does it if its plugged in charging or not, I've looked through a few posts and this seems to happen for time to time but very few people have posted any solution. I will try to reinstall the OS when I get home but with the thing going haywire I'm not sure I can get it to connect to do that. Is there any solution to this? What caused it?

Here is the procedure. Read it over first, then do it.
You need to follow these instructions to "debrick" your PlayBook:
1. Do a backup of your PlayBook using your computer and BlackBerry Desktop Software version 7 installed. It can be downloaded from http://us.blackberry.com/apps-software/desktop/
2. After the backup is finished, unplug the PlayBook and on the PlayBook press and hold down the power button until the unit forces the device off.
3. With the Desktop Software still open on your computer and the PlayBook powered off, connect the PlayBook to your computer once again.
4. You should see an error screen from Desktop Software popup with the options to Retry, Update, or Cancel.
Very quickly choose the Update option.
5. All information will on your PlayBook will be erased and a reload of the Software will commence to install on the PlayBook.
6. Once this is complete your PlayBook will go back through the initial (as if new) setup wizard (entering the BlackBerryID, etc., and then you can perform a restore using Desktop Software to return your personal data from the backup. Applications which you downloaded from AppWorld won't restore, but they can be easily reinstalled using AppWorld > MyWorld section of AppWorld.

Control valve that opens and closes linearly using DSC

I have to create a control valve that opens and closes linearly.I want to view its variation in percentage wise in the graphical form which uses DSC module.

Hi Gerardjoe,
I'm not sure that I completely understand what you're trying to do. In the DSC modules, the valves (2D and 3D) are simply boolean indicators.
One thing you could do, to see some sort of a percentage change, would be to have an indicator such as a vertical fill slide. Here, you would put a number between 0-100.
Then, you could have a comparison, such that if this value was over, say, 60, then the boolean value would be true and the valve would turn on. Else, the value would be false and the valve would stay false.
I hope that this answers your question; if I did not understand correctly, please do respond and clarify.
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current

Find open and close smart quotes

Dear scripter,
Here I am trying find whether all the open double smart quotes(") are closed with close double smart quotes("). Here is my small work to find how many open and close quotes.
myopenqu=app.activeDocument.search("^{", false, false, "^{");
myclosequ=app.activeDocument.search("^}", false, false, "^}");
myopenqulength = myopenqu.length;
myclosequlength = myclosequ.length;
if(myopenqulength!=myclosequlength)
alert("Quotes not matched\n"+ myopenqulength +" Open quotes found\n" + myclosequlength +" Close quotes found")
It works well, the script just alert if I have 25 open quotes and 23 close quotes
Quotes not matched
25 Open quotes found
23 close quotes found
Now I want to find the quote set where the 24,25th set close quotes are missing?
Is there any way to find the misisng quotes
Thanks in advance
regards
a r u l
vpublish.net

You'd have to look for unmatched quotes, in this case two cases of two open quotes without an intervening closed quote. This is difficult to script in CS2 because it doesn't have GREP natively and because of footnote problems. In CS3/4 it should be possible. But even then it will work only if you don't have quotes within quotes.
Peter

Report OPEN and CLOSE in computers client

Post Author: B.prata
CA Forum: Crystal Reports
I have an application developedin Visual Basic with report in the CR 4.6, but in the computers customers when I will access the application,I try to emit a report , it opens and close the report. What can be?

There is no FaceTime app for the iPhone if that's what you're asking. FaceTime is accessible through your Contacts as one of the options in how to contact a person -- there is no standalone FaceTime app for iPhone.
If you mean how to disable FaceTime, you can do that in Restrictions (Settings/General/Restrictions).

UCCX 10 open and close over-ride

Similar Messages

Maybe you are looking for