UCCX 7.0(1) RmCm resource issue

I have an issue with our UCCX 7.0(1):
In RmCm -> Resource configuration
Just for one particular resource - the resource group changes from "Service Desk" to "Not selected" overnight and team changes from "Service Desk" to "Default". The next morning the agent is not able to login and we have to manually change both Resource group and team to "Service Desk" for the agent to be able to login. There are no issues once we manully reassign the resource to the correct resource group and team but overnight the resource group and team again changes to "Not selected" and "Default". I wonder what happens overnight that might cause this?
Note: I have attached a screenshot. And this only happens for 1 resource not anybody else.
Please help.

Hi Andrew,
Thanks for the reply. No, I don't know the exact time that this happens but it does happen everyday.I think you are wondering about the LDAP sync in CUCM and yes we do have an LDAP sync at 1:00 am everyday. This might have something to do with the issue but I don't know what. And no, nobody changes anything in the system - there are only 2 people (myself and another) with access to UCCX admin and we didn't do anything. And this happens only for this one user.

Similar Messages

CCX agent/resource issue

Hi everyone,
We have a lab enviroment setup:
1x CUCM System version: 7.1.5.10000-12
2x CCX System version: 8.0.2.10000-41
we did everything by the book,
1) end user ( IPCCX line associated, Group permissions defined, device associated)
2) application user defined in UCM, devices associated to RmCm application user
If we check in CCX administration:
tools->user management->user view
users are visible and have agent capabilities
if we go to:
Subsystems->RmCm->Resources
we have no resources/agents available?
also see the attachments
Did anyone have similar experience?
Regards!
Ales

Hi Aaron!
well, the restart of "Cisco DirSync" didn't quite do the trick.
i captured the "cisco desktop sync service" log, and found multiple errors,
Do these errors explain enything?
"ERROR LRMS2001 The LRM client failed to connect to any service."
"ERROR CACMI2000 LRM Error: Failed to initialize LRM Client."
"ERROR STD2001 Client failed to connect to any service."
"ERROR CADLRM2000 LRMClient could not get the list of LRM Server profiles from LDAP, connection may fail. Reason: "
see the attachment of full desktop log for more info..
Thanks!

BW system ran out of "session" = transaction SMGW; how to track down "resource" issues?

Hi SAP Experts,
we had on our SAP BW system the following situation:
We are having a week daily process chains, that is uploading data from our ECC system.
Once in a month, we are uploading from our APO/SCM system data from our BW system.
Parallel we are having also SAP PreCalculation Server (with three PreCalc instances) instances running. The PreCalc Server is running daily.
The landscape in short: (DB server = AIX/Oracle, App-Server = Linux, SAP System=7.01; PreCalc Server = Win2008/64)
This week when all was running at the same time, we faced problems, that log-on to SAP System via ABAP took a long time, same BEx Reports (some failed with Run Time errors).
From the landscape infrastructure we couldn’t detect any resource issues (we are having two application servers connected to the BW landscape).
What we saw from the system transactions (SM66, SM51, SM21, ST02, ST04, ST06N) the issue did not seem to be resource based, by network, database, amount of work processes etc.
But we noticed in transaction SMGW, that it seemed not possible for external programs, like a BEx reports or the PreCalc Server to connect with new session to the BW ABAP landscape.
The trace showed in SMGW:
* LOCATION    SAP-Gateway on host server / sapgw##
* ERROR       Conversation 01792797 not found
* TIME        Tue Jul 22 14:13:03 2014
* RELEASE     720
* COMPONENT   SAP-Gateway
* VERSION     2
* RC          728
* MODULE      gwxxconn.c
* LINE        971
* COUNTER     75240
In system log, database alert log, we could not find any dead locks reported or anything reported, that explained why, via the SMGW is was not possible to connect with new sessions.
We restarted the PreCalc Server and after clarifying with application team of APO/SCM we stop the process chain and than the system was back to “normal” operation.
Now the question is, if you faced similar issues and what the solution, or how you where able to track down the issue?
Thanks for your ideas.
Best regards
Carlos Behlau

Hi Alwina,
thank you for your help.
What I was able to is in SMGW, because the system was very slow, that some connection where "red".
I forgot to capture screenshots and now I am not able to recall the the status text.
It is there a way to find out, if we reach the "max" connection numbers, like parameter gw/max_conn 500, via ST03N or via SMGW or via some logs?
I checked the SMGW trace, but I am not able to identify via the trace in SMGW, if the failures happened now, because max. values of parameters have been reached or what the cause was/is.
What I meant:
All external programs, like SAP BW BEx Analyzer (Excel Reporting tool for BW) are connecting via RFC calls. Also SAP Pre-Calculation Server is using RFC calls to generate the reports and send them via E-mail.
Usually, I can see these connections in SMGW (goto => logon clients).
There I didn't noticed that we reach 500, when we had the problem.
Best regards
Carlos

IEEE 1394 insufficient resources issue

We currently have a CVS-1454 with two cameras performing inspections. Due to circumstances with the inspection and machine, we are trying to move the inspections to the computer that is currently communicating with the CVS. We are getting the error "The selected IEEE 1394 camera could not be initialized because of insufficient resources on the IEEE-1394 bus". This error is only happening in Vision Builder. It is not happening in MAX.
The system specifics are: the PC is running XP SP3 with a PCI-8252 card. There are two Basler scA1390-17fm cameras performing the inspection. The cameras are using Format 7, Mode 0, 1392x1040. The PCI card is new out of the box, the cameras are a couple of years old. VBAI version 3.5, LabView 8.6, MAX is version 4.6.2.
I found the various articles on NI.com addressing this issue, but the recommendations have not had an effect.
Framerate & Packet size: In MAX the frame rate can only be set to 100Mbs. Reducing the packet size has no effect. It was set at the default to 1024, but we lowered it to 200 with no effect.
We installed the AVT Bus Driver Package, but when we switched to the AVT bus driver, the bus went away in MAX and then Windows went through the found new hardware wizard and we were unable to get the cameras to show up correctly in Windows Device Manager, nor did they ever show up in MAX. All the documentation I've seen looks like we should not need to install additional drivers for the Basler cameras.
The machine does not appear to have Hotfix 885222 installed, but I was contemplating trying to run this update anyway: http://support.microsoft.com/kb/955408
Alternate video modes: We tried to set the cameras to any other video mode. We can put one camera at some insanely small resolution, but then the other camera still doesn't work regardless of the video mode.
I hope I've put all the details out there. Any thoughts? Should we need to install anything else after switching to the AVT bus driver? I was hopeful that would solve the problem.
Thanks,
Paul
Solved!
Go to Solution.

I concur with Brad that your issue is surely the famous Microsoft issue whereby XP SP2 and SP3 downgraded potential throughput to S100, requiring either rollback to the SP1 1394 driver from Microsoft, or upgrade to Win7 where they finally fixed the problem.
Or using a substitute Microsoft compatible replacement 1394 driver, such as that offered by AVT.
But I'd respectfully differ with Brad that re. whether the AVT driver "worked right" or not... as it was only designed to work with AVT cameras - and will not work with Basler cameras. That was an intentional design feature. Or constraint, depending on one's perspective. ;-)
Scott

UCCX 7.0.1SR4 and Presence issue

Hi
I have configured the presence AXL user to that of my cups username and everything validates okay. My CUPC client works fine and can view all contacts so the LDAP profile is correct.
However, when I try to search for contacts within CDA I recieve the message
CDAUI2067 Search did not complete successfully, and only partial results are displayed. Contact technical support.
I have taken a wireshark trace of the LDAP transaction between UCCX and LDAP server and the response is fine with correct response i.e. valid search yet the application errors.
Anyone had similar issues
Paul

Problem When searching for subject matter experts from the Contact List page,
no names are found, and this error message appears: âCDAUI2067
search did not complete successfully, and only partial results are
displayed. Contact technical support.â
Solution This error occurs when the parameters on the Unified Presence Cluster
Settings page are not configured correctly. There are two possible
causes of this problem: the user credentials are incorrect or the
hostname/IP address is incorrect.
NOTE: The user specified on the Cisco Unified Presence Cluster
Settings page must be able to perform SOAP queries and must
be associated with the same profile in LDAP that agents are
associated with.
To diagnose and resolve the problem, complete the following steps.
1. Choose Cisco Unified Presence Settings > Cisco Unified Presence
Cluster Settings.
Desktop Administrator Problems
April 2009 85
2. Click Verify.
â If the hostname/IP address are incorrect, this error message
appears: âCDAUI2033 Error communicating with the Unified
Presence Server.â
â If the user credentials are incorrect, this error message
appears: âCDAUI2034 Invalid Cisco Unified Presence Cluster
user credentials. Configured user must be able to run SOAP
queries.â
3. Type the correct information in the appropriate fields, then click
Verify to test the information you just entered. A message should
appear, stating that the transaction was successful.
4. Click Save.

UCCX 8.51 demo license install issue

I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
Thanks,

Hi,
License will come into picture when you are performing the UCCX initial app admin setup.
I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
Thanks,
Anand

ClickOnce and a System.Windows.Interacticity.resources issue

Hi,
I'm publishing my wpf app with clickOnce. I have put all the stuff like dlls, reference, prerequisites and so on.
But, when I try to install it to a virgin virtual machine, it says me that I need the System.Windows.Interacticity.resources version 4.0.0.0.
I use the System.Windows.Interacticity.dll in my project, but I've never used the .resources. If I try to use the System.Windows.Interacticity.dll version 4.5 instead of 4.0... nothing changes!!
How can I include System.Windows.Interacticity.resources with clickOnce or exclude it?
I have System.Windows.Interacticity.resources in my bin/debug folders, but if I try to include it, it gives me a nullPointerException error.
I have tried a lot of other forums/discussions/tickets, but still nothing worked for me.
NOTES: updating my project with dlls and prerequisites, the System.Windows.Interacticity.resources began necessary. Before, it wasn't in this way.
Can I ignore it? or, how can I include it?
I saw it in the /bin folder, inside the folders with the language name (en, de, fr, it..). But if I try to refer to one of these System.Windows.Interacticity.resources,
it gives me nullPointerException.
This error is stopping my installer, so it is a big problem.
Thanks in advance,
Piero

Hello,
>>But, when I try to install it to a virgin virtual machine, it says me that I need the System.Windows.Interacticity.resources version 4.0.0.0.
1. To clarify this issue, you could share us the screenshot about that message.
>>I use the System.Windows.Interacticity.dll in my project, but I've never
used the .resources. If I try to use the System.Windows.Interacticity.dll version 4.5 instead of 4.0... nothing changes!!
>>How can I include System.Windows.Interacticity.resources with clickOnce or exclude it?
2. What did you mean by "use"? Calling method? Or did you added any reference to it?
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Motherboard Resources" Issue

Under Device Manager, System Devices, I noticed that I have "Motherboard Resources" listed three times. Am I missing something?
I've learned to leave well enoough alone with this thingie, and won't mess with them, unless someone here knows what they are and what I should do.
No living vicariously through my computer allowed!

I had that issue w/ Windows 2000 Advanced Server, but I recently upgrade to Windows Enterprise Server 2003, and it corrected the issue.
Prior to my upgrade, I tried about every bit of driver installation/unistallation, disabling/enabling I could think of to no avail. First time I have every run across a PC with this type of issue, though I do not think it impacts overall stability/performance, it's just an annoyance to us perfectionists

Motherboard resource issue

hey!
I have a K7N2G ILSR+2400xp.(just running onboard video untill I fix this issue) I just installed a fresh copy of WIN2000pro. In device manager, under motherboard resources there is an exclaimation mark!! When I open it ...it says "on PCI BUS" code 14 and says I have to reboot in order for this device to function...But when I reboot it stays the same. I have tried everything I can think of.(all updates,reinstall all drivers) when I try to update the driver it says it found one...and to reboot...again nothing changes..
The file that it seems to want to load is winnt/inf/machine.inf
Driving me NUTS!!!

yes as I mentioned...I've tried reinstalling the drivers..and all windows updates.

Migrate custom reports UCCX 8.0 to 9.0 issue

Dear all,
We migrated UCCX 8.0 to the new UCCX 9.0. After the migration the customized reports (designed with old version of Crystal Reports) not work in the new CCX Historical Reports 9.0.
Any idea or procedure to migrate easy the customized reports from UCCX 8.0 to 9.0 without re-design the report with Crystal Reports 11?
Thanks so much!

The advice I have seen in this forum, many times, is that you do NOT have Acrobat and Reader installed together, since some components are the same (same module name?) and installing Reader causes problems for Acrobat

UCCX Post Call Survey DB Write Issue

I am runng UCCX 7.0(1)SR5. I created a post call survey script and set up a DB connection to the external SQL 2008 server on the UCCX server. I had problem with the insert statement. Since the string type in UCCX is enclosed in double quote ("), however, the external SQL server expected a single quote (') for the string type. Any resolution?
For example:
I had the SQL profiler running on the external SQL 2008 server, that captured what is passed from UCCX to the external DB.
1.)
When I run the following statement, where $CallerID, $AgentExt, $Q1, $Q2 and $Q3 are type Char, it can write to the database.
INSERT INTO surveys(CallerANI,AgentExt,Q1,Q2,Q3) VALUES($CallerID,$AgentExt,$Q1,$Q2,$Q3).
The profiler sees UCCX pass this statement: INSERT INTO surveys(CallerANI,AgentExt,Q1,Q2,Q3) VALUES('4','3','2','2','2')
2.)
When I run the following statement, where $CallerID and $AgentExt are type string and $Q1, $Q2 and $Q3 are type Char, it results an exception.
INSERT INTO surveys(CallerANI,AgentExt,Q1,Q2,Q3) VALUES($CallerID,$AgentExt,$Q1,$Q2,$Q3).
The profiler sees UCCX pass this statement: INSERT INTO surveys(CallerANI,AgentExt,Q1,Q2,Q3) VALUES("4444","3333",'1','1','1')

Please do not resurrect two years old threads when your question is totally unrelated to the original post.
Yes, you do use the Get Call Contact Info step.
G.

UCCX 9.0.2 Email Ready Issues

We have agents that are both email and phone ready. After taking a call, they are not always put back into email ready status. Anyone else experiencing this on this version of UCCX?

Hi,
Look like you are hitting CSCua33965 Bug and try the workaround given in the below link.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCua33965
Regrads,
Gnan.

CS6 HTML Resource issues

Having trouble accessign my HTML Resource files.
I'm doing exactly the same thing I did in our last magazine.
I triple checked my naming conventions
for all files. Im trying to link a button to a pdf file as a "Go to URL" command.
I've accurately typed HTMLResources/file.pdf in the URL line.
Still not working. Telling me "The requested URL was not found on this server"
This was easy before. Did something change that I don't know about?

must be on my end then.
I loaded it from the folio producer and the folio builder.
i guess ill try again.
ill try again.

Kernel upgrade to patch level 196, ECC 5.0, MSCS resource issue.

Hi,
We have 3 system landscape DEV, QAS & PRD on win 2003, oracle 10G, ECC 5.0.
Our PRD system is on MSCS with CI on node A and DB on node B.
Recently I successfully upgrade kernel off DEV & QAS system to patch level 196 of stack 18.
When I tried to upgrade the kernel of PRD system one of the cluster resource drive (The drive contains the usr folder) is automatically moving from Node A to Node B and I got the error u201Capplication server shut downu201D. We donu2019t have additional application server in the landscape.
Please suggest the solution.
Regards,
Rajesh

Hi Juan,
How are you? Thanks for your reply.
We are using ECC 5.0. I have found more errors in dev_w0 as follows,
ERROR => ShmCreate( ATTACH 62, 85588600) failed 1 [mpixx.c      843]
ERROR => DpInitMpi: MpiInit failed (1) [dpxxtool2.c 3556]
in_ThErrHandle: 1
ERROR => tskh_init: DpInitMpi (step 1, th_errno 17, action 3, level 1) [thxxhead.c   9621]
Info for wp 0
stat = 4
reqtype = 1
act_reqtype = -1
rq_info = 0
tid = -1
mode = 255
len = -1
rq_id = 65535
rq_source = 255
last_tid = 0
last_mode = 0
int_checked_resource(RFC) = 0
ext_checked_resource(RFC) = 0
int_checked_resource(HTTP) = 0
ext_checked_resource(HTTP) = 0
report = >                                        <
action = 0
tab_name = >                              <
LOCATION    SAP-Server sapcigrp_ECP_00 on host sapeccprddb (wp 0)
ERROR       tskh_init: DpInitMpi
TIME        Sun Nov 16 05:13:07 2008
RELEASE     640
COMPONENT   Taskhandler
VERSION     1
RC          17
MODULE      thxxhead.c
LINE        9806
COUNTER     1
PfStatDisconnect: disconnect statistics
Entering TH_CALLHOOKS
ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
TrThHookFunc: called for WP dump
ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed hxxtool3.c 254]
Entering ThSetStatError
Entering ThReadDetachMode
call ThrShutDown (1)...
***LOG Q02=> wp_halt, WPStop (Workproc 0 4000) [dpnttool.c   357]
Please suggest the solution
Thanks & Regards,
Rajesh

Accessing Jar resource issue (in Junit test)

Hi,
I have a package called my.test.example containing one class called Example1.class and a property file called MyProp.properties. I am trying to load the content of MyProp.properties with the following:
static {
    Properties Configuration = new Properties();
    try {
       URL url = Example1.class.getResource("/MyProp.properties");
       Configuration.load(url.openStream());
    } catch (IOException ex) {
        LOG.severe("Cannot load MyProp.properties :\n" + ex.toString());
}The url is systematically null. I have tried including the package name, to use '/' instead of '.', but it does not work. How should I proceed? I am looking for a solution that works wherever the .jar is installed. Is this possible?
Thanks.
P.S.: I am working under Vista and the static code is invoked in a Junit test. I don't know whether this has an impact on the issue (but I don't think so).

OK. Solved the issue with:
Configuration.load(Example1.class.getResourceAsStream("MyProp.properties"));I had to solve another 'hidden' bug in the code.

UCCX 7.0(1) RmCm resource issue

Similar Messages

Maybe you are looking for