UCCX 7.0 Install Configuration Error

I have a UCCX 7.0 installation that I have patched to 7.0(1) sr5 per a previous post. The layout is thus:
CMBE 7.1(3) with LDAP integration
UCCX 7.0(1)sr5
I have created the following users in Active Directory:
AXLAdmin
jtapiUser
rmcmUser
When performing the integration portion in AppAdmin, I add the CTI and rmcm Servers and propogate with the jtapiUser and rmcmUser accounts respectively, however, this seems to be failing and I'm not sure where. I believe it to be due to the LDAP integration since, IIRC, the jtapi user is created by UCCX but since CMBE is LDAP, this negates adding users (like I said, I don't recall if the jtapi user is created by UCCX).
Nonetheless, I have created the accounts in LDAP and they show up in CallManager.
The error I am receiving is:
User Configuration
Configuration - Error
Error occurred while performing the operation. Please contact your System Administrator. You may refer to Application Administration logs for more details
Additionally, the logs are showing all sorts of things:
MADM: LIB_AXL-3-EXCEPTION in <bunches of places>
MADM-ADM_CFG-7-UNK:CallManagerConfigServlet.writeRmcmConfig - Error in writing JTAPI Config data.
As I mentioned, I read a post that stated patching the box fixes this, however, that did not appear to resolve things.
Suggestions?

The three accounts you mentioned there are Application Users, not End Users. As such they will not exist in Active Directory. The CCX installation documentation will instruct you to create the AXL account with Super User rights. CCX will then create the second two accounts for you.
Installation Guide for Cisco Unified CCX and Cisco Unified IP IVR, Release 7.0(1)

Similar Messages

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?

Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!

I have just upgraded to PSE 12 and Premier E 12, and tried to installed many times. The pop up says "Configuration Error"; contact Adobe Tech Support(?); and "mention error code 1"! Help please!
Install appeared to run okay up to,, and including "shared Technologies"....

Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows

Cannot install GLIB on OSX 10.6 (configure: error: *** No iconv() implement

Folks,
I've been trying everything I can to install GLIB 2.23.0 on OSX 10.6 and it's failing when I attempt to run the ./configure with this error message below.
checking for libiconv_open in -liconv... no
configure: error: * No iconv() implementation found in C library or libiconv
How do I resolve to get this installed?

This solved it.
http://letsneverdie.net/blog/?p=75
./configure
Once this is complete, we’ll need to replace 3 lines in a certain source file.
From what I understand, apple’s included libiconv doesn’t support 64bit, and I happen to be building a 64bit irssi. So, let’s make the changes below to make sure the libiconv that we’ve built is used. Navigate to the ‘glib’ folder (just plain glib, the one INSIDE of the main glib source folder), and open ‘gconvert.c’ with your favorite editor.
#if defined(USELIBICONVGNU) && !defined (LIBICONVH)
#error GNU libiconv in use but included iconv.h not from libiconv
#endif
#if !defined(USELIBICONVGNU) && defined (LIBICONVH)
#error GNU libiconv not in use but included iconv.h is from libiconv
#endif
replace the last 3 lines, like so:
#if defined(USELIBICONVGNU) && !defined (LIBICONVH)
#error GNU libiconv in use but included iconv.h not from libiconv
#endif
#if !(defined(_APPLE_) && defined(_LP64_)) && !defined(USELIBICONVGNU) && defined (LIBICONVH)
#error GNU libiconv not in use but included iconv.h is from libiconv
#endif
Save and close the file in place. Now you’re ready to compile and install glib:
make
sudo make install

Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

HELP!!!
I am trying to install iTunes on my Windows 7 laptop and get this error:
"The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail

Ok people, I think I have found the solution !
If you click on the start button from your desktop screen.
Then in the "search programs and files" field type : apple software update - you can find the apple installer.
Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
I then restarted my computer and it seems to be working now !
Good luck everyone !

Getting a side by side configuration error after installing obiee 10.1.3.4.

Hi, I have installed obiee 10.1.3.4.2 version over my windows 7 desktop. After installation, when tried with opening the admin tool, i'm getting a side by side configuration error. Please help what to do to overcome this

Go through the Doc id 1067138.1 at Metalink below is the extract.
The following procedure must be done by a UNIX administrator or by an Oracle BI Administrator with sufficient privileges.
To download Oracle BI installation files under UNIX:
   1. Log in as the user who is to run the Oracle BI processes.
   2. Insert the Oracle Business Intelligence infrastructure installation DVD.
   3. Change to the directory where the installation DVD is mounted (or change directory to the downloaded software).
   4. Download the Oracle BI files by using FTP to copy them to the desired server and directory.
      Note: Make sure to FTP all the files in binary mode, including license.xml.
   5. After the files are downloaded, check that the files in the top level directory, such as setup.sh, have execute permissions.
      execute the command: ls -la or ls -ltr
      Confirm that the files have permissions resembling these:
      -rwxr-xr-x 1 oracle dba 6395 Aug 9 22:11 license.xml
      -rwxr-xr-x 1 oracle dba 657328 Aug 9 22:10 Solaris.bin
      -rw-r--r-- 1 oracle dba 12 Aug 9 22:04 media.inf
      drwxr-xr-x 3 oracle dba 4096 Aug 9 22:11 script
      -rw-r--r-- 1 oracle dba 501194022 Aug 9 22:10 setup.jar
      -r-xr-xr-x 1 oracle dba 1311 Aug 9 22:11 setup.sh
      -rw-r--r-- 1 oracle dba 104 Aug 9 22:04 version.txt(Mark the asnwer as helpful of Correct if it is )
Cheers

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Peas

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Please uninstall and reintall... Error 16

Hi midtone,
Is it possible to download the product? It seems that copying didn't work.
If you can download then please use this link: Download CS6 products
-Ankit

Configuration error when installing..

Downloaded test versions, and when launching InDesign it says configuration error. Uninstall and install again. Error number: 5. Uninstalled and did it all over, same problem again. Other test versions works ei PhotoShop.

Hi NoraO,
Adding to what Jeff said, if you are on a windows can you please try the following two steps :
1) Right click and run the product as an admin and check if its working as desired or not.
2) Please check permissions on Adobe folder : C:\Program Files (x86)\Common Files\Adobe\SLCache & C:\ProgramData\Adobe\SLStore .
Cheers,
Kartikay Sharma

When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation." But it gives me no more information as to what I can do. Help please?

When trying to download iTunes, I get an error message saying "the instaler encountered errors before iTunes could be configured. Errors occured during installation." But it gives me no more information as to what I can do. Help please?

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

Mac, keep getting configuration error 1 when trying to open files re-installed from external drive

I recently had to do a clean install of my computer and tried to run my Adobe applications after installing them from a hard drive backup. It keeps giving me Configuration Error 1. I tried to take a different route and use my serial number to activate Adobe Acrobat X Pro and my serial number will not work to activate the free download.
I downloaded a university copy of Adobe Creative Suite Design Premium CS5.5 in September 2011.

http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Mylenium

Hey, I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code

I recently purchased the creative cloud and installed photoshop but now when I go to open the application it tells me theres a configuration error. It suggests restarting or contacting customer support but I thought I'd try this first. the error code is error: 213:19. Does anyone seeing this please have any advice on what to do?

This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Fresh install of InDesign but configuration error on opening

I just installed InDesign CS5 from the install disk on to a new Macbook Air recently purchased. Install went OK, but on trying to open the app, I get an error message:
Configuration Error
A problem has occurred with the licensing of this product.
Error 213:5
Anyone know what this means? Or how to fix it?
Thanks,
— Richard

CS5 runs fine on Maverick on my Macbook Pro. Have not run into any limitations. However, got advice to update permissions in the Application Support folder and that resolved it. Now opening.

Installing Clamav: configure: error: C compiler cannot create executables

I want to install clamav-0.93.3 but i keep getting an error at ./configure
This server doesn't have access to internet so blastwave isn't an option i think.
Here is my config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by clamav configure 0.93.3, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure CC=/usr/bin/gcc
## Platform. ##
hostname = host-fs1
uname -m = i86pc
uname -r = 5.10
uname -s = SunOS
uname -v = Generic_118855-36
/usr/bin/uname -p = i386
/bin/uname -X = System = SunOS
Node = host-fs1
Release = 5.10
KernelID = Generic_118855-36
Machine = i86pc
BusType = <unknown>
Serial = <unknown>
Users = <unknown>
OEM# = 0
Origin# = 1
NumCPU = 4
/bin/arch = i86pc
/usr/bin/arch -k = i86pc
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/sfw/bin
PATH: /usr/sfw/sbin
PATH: /usr/ccs/bin
PATH: /usr/openwin/bin
PATH: /usr/dt/bin
PATH: /opt/sfw/bin
PATH: /opt/sfw/sbin
## Core tests. ##
configure:2028: checking build system type
configure:2046: result: i386-pc-solaris2.10
configure:2068: checking host system type
configure:2083: result: i386-pc-solaris2.10
configure:2105: checking target system type
configure:2120: result: i386-pc-solaris2.10
configure:2205: result: creating target.h - canonical system defines
configure:2351: checking for a BSD-compatible install
configure:2407: result: config/install-sh -c
configure:2418: checking whether build environment is sane
configure:2461: result: yes
configure:2489: checking for a thread-safe mkdir -p
configure:2528: result: config/install-sh -c -d
configure:2541: checking for gawk
configure:2571: result: no
configure:2541: checking for mawk
configure:2571: result: no
configure:2541: checking for nawk
configure:2557: found /usr/bin/nawk
configure:2568: result: nawk
configure:2579: checking whether make sets $(MAKE)
configure:2604: result: no
configure:2803: checking for gawk
configure:2830: result: nawk
configure:2854: checking for a BSD-compatible install
configure:2910: result: config/install-sh -c
configure:2921: checking whether ln -s works
configure:2925: result: yes
configure:2932: checking whether make sets $(MAKE)
configure:2957: result: no
configure:3048: checking for style of include used by make
configure:3076: result: none
configure:3146: checking for gcc
configure:3173: result: /usr/bin/gcc
configure:3411: checking for C compiler version
configure:3418: /usr/bin/gcc --version >&5
gcc (GCC) 3.4.6
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3421: $? = 0
configure:3428: /usr/bin/gcc -v >&5
Reading specs from /usr/local/lib/gcc/i386-pc-solaris2.10/3.4.6/specs
Configured with: ../configure with-as=/usr/ccs/bin/as with-ld=/usr/ccs/bin/ld enable-shared enable-languages=c,c++,f77
Thread model: posix
gcc version 3.4.6
configure:3431: $? = 0
configure:3438: /usr/bin/gcc -V >&5
gcc: `-V' option must have argument
configure:3441: $? = 1
configure:3464: checking for C compiler default output file name
configure:3491: /usr/bin/gcc conftest.c >&5
gcc: installation problem, cannot exec `as': No such file or directory
configure:3494: $? = 1
configure:3532: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "clamav"
| #define PACKAGE_TARNAME "clamav"
| #define PACKAGE_VERSION "0.93.3"
| #define PACKAGE_STRING "clamav 0.93.3"
| #define PACKAGE_BUGREPORT "http://bugs.clamav.net/"
| #define PACKAGE PACKAGE_NAME
| #define VERSION "0.93.3"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3539: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=i386-pc-solaris2.10
ac_cv_env_CC_set=set
ac_cv_env_CC_value=/usr/bin/gcc
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=i386-pc-solaris2.10
ac_cv_prog_AWK=nawk
ac_cv_prog_ac_ct_CC=/usr/bin/gcc
ac_cv_prog_make_make_set=no
ac_cv_target=i386-pc-solaris2.10
## Output variables. ##
ACLOCAL='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run aclocal-1.10'
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run tar'
AR=''
AUTOCONF='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run autoconf'
AUTOHEADER='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run autoheader'
AUTOMAKE='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run automake-1.10'
AWK='nawk'
BUILD_CLAMD_FALSE=''
BUILD_CLAMD_TRUE=''
CC='/usr/bin/gcc'
CCDEPMODE=''
CFGDIR=''
CFLAGS=''
CLAMAVGROUP=''
CLAMAVUSER=''
CLAMAV_MILTER_LIBS=''
CLAMD_LIBS=''
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DBDIR=''
DEFS=''
DEPDIR='.deps'
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_UNRAR_FALSE=''
ENABLE_UNRAR_TRUE=''
EXEEXT=''
FRESHCLAM_LIBS=''
GETENT=''
GREP=''
HAVE_LIBGMP=''
HAVE_MILTER_FALSE=''
HAVE_MILTER_TRUE=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LDFLAGS=''
LIBBZ2=''
LIBBZ2_PREFIX=''
LIBCLAMAV_LIBS=''
LIBCLAMAV_VERSION='4:4:0'
LIBGMP=''
LIBGMP_PREFIX=''
LIBOBJS=''
LIBS=''
LIBTOOL=''
LN_S='ln -s'
LTLIBBZ2=''
LTLIBGMP=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /usr/src/clamav-0.93.3src/config/missing --run makeinfo'
NMEDIT=''
OBJEXT=''
PACKAGE='clamav'
PACKAGE_BUGREPORT='http://bugs.clamav.net/'
PACKAGE_NAME='clamav'
PACKAGE_STRING='clamav 0.93.3'
PACKAGE_TARNAME='clamav'
PACKAGE_VERSION='0.93.3'
PATH_SEPARATOR=':'
RANLIB=''
SED=''
SET_MAKE='MAKE=make'
SHELL='/bin/bash'
STRIP=''
THREAD_LIBS=''
TH_SAFE=''
VERSION='0.93.3'
VERSIONSCRIPTFLAG=''
VERSIONSCRIPT_FALSE=''
VERSIONSCRIPT_TRUE=''
ac_ct_CC='/usr/bin/gcc'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='#'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='i386-pc-solaris2.10'
build_alias=''
build_cpu='i386'
build_os='solaris2.10'
build_vendor='pc'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='i386-pc-solaris2.10'
host_alias=''
host_cpu='i386'
host_os='solaris2.10'
host_vendor='pc'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='$(SHELL) /usr/src/clamav-0.93.3src/config/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(top_builddir)/config/install-sh -c -d'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sendmailprog=''
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target='i386-pc-solaris2.10'
target_alias=''
target_cpu='i386'
target_os='solaris2.10'
target_vendor='pc'
## confdefs.h. ##
#define PACKAGE_NAME "clamav"
#define PACKAGE_TARNAME "clamav"
#define PACKAGE_VERSION "0.93.3"
#define PACKAGE_STRING "clamav 0.93.3"
#define PACKAGE_BUGREPORT "http://bugs.clamav.net/"
#define PACKAGE PACKAGE_NAME
#define VERSION "0.93.3"
configure: exit 77
Can anyone please help me i am desperate......
thanxs

I need to download the dvd image again its about 2 GB.
I've downloaded the image. scp SUNWPROT to the server.
this is the install it didn't go well:
root@host-fs1:/usr/src# pkgadd -d . SUNWsprot
Processing package instance <SUNWsprot> from </usr/share/src>
Solaris Bundled tools(i386) 5.10,REV=2004.12.18
Copyright 2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
The installation of this package was previously terminated and
installation was never successfully completed.
Do you want to continue with the installation of <SUNWsprot> [y,n,?] y
Using </> as the package base directory.
## Processing package information.
## Processing system information.
16 package pathnames are already properly installed.
## Verifying package dependencies.
## Verifying disk space requirements.
## Checking for conflicts with packages already installed.
## Checking for setuid/setgid programs.
This package contains scripts which will be executed with super-user
permission during the process of installing this package.
Do you want to continue with the installation of <SUNWsprot> [y,n,?] y
Installing Solaris Bundled tools as <SUNWsprot>
## Installing part 1 of 1.
cpio: Can't read input: end of file encountered prior to expected end of archive.
1 errors
Unarchiving of /usr/share/src/SUNWsprot/archive/none failed with error 1
pkgadd: ERROR: class action script did not complete successfully
Installation of <SUNWsprot> failed.
Any suggestions?
Edited by: arragon_jaap on 25-aug-2008 11:37

Hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what should i do? thanks!

hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?

hi, i have sony vaio laptop that already has photoshop elements 12 installed once bought, now i am having a configuration error 12 and says that i need to uninstall and reinstall which i cant. what can i do without uninstalling?

Getting Configuration Error 16 when trying to install Elements 12

Also, it won't accept my Adobe password, just used to get here, and to get the installer for Elements 12 in the first place!

start here, http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

UCCX 7.0 Install Configuration Error

Similar Messages

Maybe you are looking for