UCCX 8.0.2 PUT backup is very small.

After i run the PUT backup from the old 7.x servers, the .tar file is only about 38 megabytes. Before the backup it said it would copy up to 1.5gb of call data before doing the backup. I am confused as to why the backup is only 38 megabytes. Is something wrong here?

Hi ,
Couple of questions;
What is the size of normal backup. Could you try to perfrom the normal backup and let me know what is the size.
Also, if you unzip the tar file created with the PUT tool, do you see the  folders you see whe you unzip the normal backup files.
If you see all those files there the backup from the PUT should be fine.
Thank you
Rajani Joshi

Similar Messages

  • Error with PUT, backup fails on UCCX 7.x

    Hi,
    maybe someone knows this, i am having a problem upgrading my UCCX 7.0(1)SR5.
    The "Pre-Upgrade Tool" PUT starts doing some stuff, but fails backing up ApplicationConfig data.
    Log shows:
    Sep 22, 2011 3:13:11 PM com.cisco.ccx.w1.export.ExportManager configBackup
    SEVERE: Error while doing Cisco Unified CCX Config data
    com.cisco.config.ConfigException: READ_ERROR; nested exception is:    java.lang.IllegalStateException: document manager is not initialized
    Could not find anything related - anybody ideas?
    Thanks for any tips,
    Ingo

    Ingo,
    Give this a try:
    1.       On the UCCX server, go to C:\Program Files\wfavvid\properties\ folder.
    2.       Take a backup of the application.MCET.properties file(Take a copy and rename
    it to
    application.MCET.properties_org).
    3.       Open the file application.MCET.properties , append the value
    ",com.cisco.doc.impl.DocumentManagerImpl" (without the quotes)  for the key
    com.cisco.manager.managers at the end of this section and save the file.
    (eg:
    com.cisco.manager.managers=com.cisco.executor.impl.ExecutorManagerImpl,com.c
    isco.expressio
    n.impl.ExpressionManagerImpl,com.cisco.database.impl.DatabaseManagerImpl,com
    .cisco.socket.
    impl.SocketManagerImpl,com.cisco.doc.impl.DocumentManagerImpl)
    4.       Try the PUT backup again.
    Let me know if this gets you any further

  • HT1766 I have made the C drive on my computer very small, with the intention that all data would be stored on the D partition. Can I change the destination for my iPad backup to the D drive?

    I have made the C drive on my computer very small and try to put all the data on the D partition. Can I change the destination for my iPad backup to the D drive?

    See if this post from turingtest2 helps : https://discussions.apple.com/message/24351688
    If not then you might be better off asking in the iTunes For Windows forum, you may be more likely to get better help there.

  • Time machine backup is very slow after migration to Mountain Lion

    After I migrated to mountain lion, Time machine backup is very slow. Time machine preference says there is no previous back up although I had Time machine on before migration. It did not help verymuch to connect an ethernet cable between my timecapsule and my Macbook Pro
    Here are the screenshots I see:
    Should I erase the previous backup made on Lion before backing up on Mountain lion? in this case how do I transfer the Lion backup file on another disk just in case something goes wrong before I have a good backup under Mountain Lion? just like any other file?

    After further reading on the forum, the problem was solved: I used the possibility to back up on a second disk (in the preferences Time Machine choose a disk and save on both disks) to make a back up on another usb disk, and then erased the old .sparsebundle file on my Time Capsule. I have then re defined time capsule as the back up disk and then the backup was muuuuuch faster (one night instead of less than 1 giga after 3 days.....)

  • TC backup starts very slowly & stops..."TM cldn't complete bkup to TC. The bkup disk is not available." The TC bkup disk shows up in sys pref with plenty of avail disk space. Suggestions

    TC backup starts very slowly & stops..."TM cldn't complete bkup to TC. The bkup disk is not available." The TC bkup disk shows up in sys pref with plenty of avail disk space. Suggestions?

    The best place to research this would be Time Machine - Troubleshooting, an excellent support document authored by Time Machine guru Pondini.
    See # C19
    http://pondini.org/TM/Troubleshooting.html

  • Mountain Lion: Time Machine Backups Get Very Big!

    This weekend I upgraded from Lion to Mountain Lion, and most things work fine. I use an USB hardrive for backups, it's the same volume I used under Lion. Mountain Lion was able to continue using it, so I did not lose the history of my documents. So far, so good.
    But: From time to time backups get really big. One example: This morning the backup that finished at 10:30 was about 50 MB at size, which is ok. The next backup started at 11:15 (and is still in progress), and while backing up, the estimated size grows and grows. Currently it's about 26,55 GB estimated, with 24 GB already backed up. But I did not produce more than 26GB of new or changed files, I just visited some websites, read news in Reeder and read some emails with Mail.app.
    I saw this behaviour several times since monday, which lead time machine to clean old backups (previously I had backups from March, now the oldest backup is from May). What causes time machine to think that there is so much data not backed up, and why doesn't time machine know the size of the backup before copying the files, as it did in Lion?
    Any suggestions?
    Marcus

    I have something similar.  On three of the last 4 days, I have one TM backup which is about 56GB.  And this is when I have not (knowingly) done anything to create 56GB data.
    But, I have found something very odd.  I have a large backup today.   I then look at the previous hour's backup - it is missing /Applications, /System, /Library, etc.  (it does have /Users and /opt).   Given that, it is not surprising that the following backup is very big when it needs to redo /Applications, etc. (about 56GB).
    So the strange behaviour is not the big backup, but the small one that preceded it!!
    The .Backup.log and .exclusions.plist (in the TM backup location) look normal (or should I say no different to any others).  In partciular the .exclusuions.plist doesn't have extras.
    The entries in system.log look normal to me, as well.
    And today, the small backup was at 4:22 am when I was fast asleep.
    Is your behaviour like this Marcus?

  • Font is shown very small when using IE Tab and Windows Display is selected to show larger fonts

    I'm on Windows 7 - 64 bit and I set my Windows display to show larger fonts (from Control Panel, Display, then choose Larger Fonts). Now all pages show bigger fonts, except when I use IE Tab.
    I use IE Tab so that I can open my Microsoft Dynamics CRM website on Firefox; however the fonts look way too small; it is even smaller than when the Display Setting was set to use normal size fonts.
    Tried to change to use smaller resolution, it didn't work. Zooming-in is very slow on Firefox, so it is not an option for working on the webpage. Tried changing the default fonts on Firefox, however the page is still always opened with the very small fonts.
    From Firefox I also unchecked the "Allow pages to choose their own fonts, instead of my selections above" (from Tools, Options, Content, Advanced), but it still doesn't fix it.
    Played around with my Firefox IE Tab setting, but no luck.
    I downgraded my Firefox to version 3.5.9 to use the older IE tab, but still not fixed yet.
    Is there a solution for this? Thanks in advanced for your help,
    -Elisabeth
    I use IE Tab so that I can open my Microsoft Dynamics CRM website on Firefox; however the fonts look way too small; it is even smaller than when the Display Setting was set to use normal size fonts. Tried to change to smaller resolution, it didn't work. Zooming in is very slow on Firefox, so it is not an option for working on the CRM. Tried changing the default fonts on Firefox, however the page is still always opened with the very small fonts.
    Initially I used Firefox 3.6.7 with IE Tab 2 Add-on. I
    == URL of affected sites ==
    http://Microsoft_Dynamics_CRM_Website

    Hi...
    Thanks for asking....
    As I put in my post before, I include template0 in my template1, as seen in template1 (AHM001):
    <af:pageTemplateDef var="attrs">
    *<af:pageTemplate viewId="/template/AHM000.jspx">*
    I use AHM000 inside AHM001. I use this approach to build many template based on one basic design.
    Actually, I don't think the problem is in page template usage because as I submitted paralel to Metalink, I've already not called template0 in template1 but I copy template0's contents to template1.
    Unfortunately, page designer show small view and below error messages still occured.
    *Jun 7, 2009 10:25:20 PM ComponentMetadataHandler _error*
    WARNING: error parsing component tag in file: /AhmTestTemplate-ViewController1-context-root/template/AHM001.jspx/tag:xmlContent/id:null
    org.xml.sax.SAXParseException: <Line 115, Column 51>: XML-20100: (Fatal Error) Expected 'EOF'.
    Fortunately my application can be run already altough the error message still logged.
    Many thanks,
    Dominic C.

  • Web pages suddenly aren't printing correctly - thefont is very small and it only prints part of the info centered on the page -what can I do about this?

    The printing on the page uses only about 1/6 to 1/8 of the width of the paper and is centered and only prints about 27 characters and in a very small font. Also some web pages won't print out any info at all except for header info at the top.

    OMG, thank you! It worked. Here's what I did (I have a Mac):
    File-> Page Setup...->
    # Settings: <page attributes>
    # Format for: I made sure my printer was selected.
    # Paper size: I put <US Letter> or <borderless 8.5" x 11"> both work. This is where the settings had been off!
    # Scale: I put <100%> - it had been at 500% which didn't help either.

  • Top of the page is gone and font size very small

    I have to put my curser at the very top of the screen to get to the web browser, otherwise it is not there. Also, the font size of my homepage and all pages I browse from firefox are very small. This began after the last update.

    Thanks! Problem solved

  • Cannot get the font size to enlarge when on sites with very small print.

    Although there is a place to enable Firefox to enlarge small print, it never works (except on this site, of course). A number of sites I visit have very small print and are hard to read, including AOL mail. Wondering if it is a problem with my computer or with Firefox for me. I have tried the settings change (no response on it), and also the AOL mail settings. The settings says that you can put in the maximum size by hand and it will automatically do it, but not for me. With poor vision, it would be nice to be able to have it at least near the size that has come through on here.

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How to find inflection point in graph when dx is very small

    Hello,
    I'm trying to sort through position data from a feedback pot to calculate linearity of movement as part of a testing procedure. An image of the data is attached. I want to delete all data in the 'flat' part, in order to do a linear fit and R^2 of the sloped line.
    This is made trickier by the fact that the number of samples, the start and end points, and slope of the line can all vary considerably. Therefore I need some way to find the 'knee' in the graph and remove all subsequent samples from the data. 
    The most obvious method I tried was to use a derivative to find the inflection point, but since I have so many data points, the dx is very small
    (~0.05) when using the built-in labview derivatives. This means that I can't distinguish the inflection point from any other change in the values due to noise or change in velocity. I made my own derivative function, which was a newton quotient that looked at (xi+N)-(xi-N) instead of (xi+1) - (xi-1), but this still did not give good results. My next idea is to just look at the difference of every N points, and arbitrarily decide a threshold to indicate when it has levelled off. Any other ideas would be really helpful though.
    Thanks,
    -SK-
    Attachments:
    position.PNG ‏17 KB

    Lets see if I can answer without having to write a book.
    Fisrt I'd run the data through a zero-phase shift low pass filter. Then look at the 2nd derivative to find the knee. Using a zero-pahse shift fileter I was able to detect when a value was jumping up when it started to jump rather than after. THis thread may be interesting.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appr

    I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.

    OK, it now sort of works. A couple of problems here:
    After updating IOS, Safari iCloud was "automatically" switched off
    Switching it on had no effect
    resetting my iPad automatically switched off safari iCloud again
    after switching it back on, it said "turning off safari data"
    switched it off and on again, now it said : "turning on safari data" and the sync worked
    On IOS 7 no problems
    The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • Since downloading the 2013 Keynote upgrade, the slide image size on handouts with 3 slides per page option is very small. Is there a way to make the slide size larger while still keeping 3 slides per page   lines?

    With the new Keynote upgrade (version 6.1), the slide image size on handouts is very small, which makes it difficult to read slide content when compiling lecture notes for students. Is there a way to make the slide size larger while still keeping to a format of 3 slides per page with lines?

    A number of posts have reported the same issue, two workarounds:
    1
    check the paper handling options or equivalent in your print dialogue box and set to scale to fit
    2 
    in the Keynote option, in the dropdown menu in the Print section, select Individual Slides
    then choose Layout, and set the number of pages, when printed you will have multiple pages on a single sheet.

  • When I am on Firefox, my Netzero email page suddenly dropped to very small print. AOL OK. How do I increase size of the print so I can read the email?

    I was using Firefox to read my Netzero email. The print suddenly dropped down to very small and I have difficulty reading the email. Netzero said to oper Mozilla Firefox, click "tools", click "options", and click "content" to change the font to a bigger size. But when I clicked the brown "Firefox" button on the Firefox page, I do not see the buttons Netzero told me to click. Can you tell me what they are referring to or just tell me how to increase the size of the font when I am reading email on Netzero. AOL email font size was not affected when I clicked AOL to read the email there.

    See this and reset the zoom level there: <br />
    https://support.mozilla.com/en-US/kb/Page+Zoom

Maybe you are looking for