UCCX 8.0.2 Unable to logon CSA and CSD
Hi Guys,
I am not able to logon CSA and CSD. Is appear the message:
"A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details"
then: License server down
In the logs appear the messages:
ERROR DESK3109 Could not obtain license from LRM.
ERROR DESK3113 Unknown exception while releasing the license(s)
I disable firewall Windows, but, didn´t solved
I disable csa in UCCX (utils csa disable), but, didn´t solved (Disable SYN FLOOD within Cisco Security Agent UCCX)
http://docwiki.cisco.com/wiki/Agent_receives_a_licensing_error_message_when_attempting_to_start_Cisco_Agent_Desktop
I verified the link below and didn´t solved too:
https://supportforums.cisco.com/document/24896/cad-login-fails-licensing-error#comment-10407376
http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-contact-center-express/46882-license-error.html
https://communities.cisco.com/message/69357
Another idea about this?
Thanks,
Wilson
Hi Bala,
Follow the command. I believe that the space is normal.
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 90G 46G 41G 54% /common
8.0K /var/log/inactive/
admin:
admin:
admin:show diskusage activelog
This command can take significantly long time,
and can also effect the system wide IOWAIT on your system.
Continue (y/n)?y
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 90G 46G 41G 54% /common
8.0K /var/log/active/mgetty
0 /var/log/active/sa
4.0K /var/log/active/platform/snmp/sappagt/sappagt.index
4.0K /var/log/active/platform/snmp/sappagt/sappagt.log
4.0K /var/log/active/platform/snmp/sappagt/startup.txt
16K /var/log/active/platform/snmp/sappagt
4.0K /var/log/active/platform/snmp/hostagt/hostagt.index
Thanks,
Wilson
Similar Messages
-
Unable to logon on SAP E-sourcing 5.1
Hi,
Unable to logon on E-sourcing 5.1 with 'enterprise' user id, error "Entry does not exist"
Background:
1. We have installed SAP E-sourcing 5.1 on Netweaver platform.
2. Cretaed Enterprise context (example 'acme1') using 'system' user id and assigned "System Default Cluster" and mainatined password which I remeber.
3. First time I'm able to logon using 'enterprise' user id and able to configure, change, save atc.
4. How wvere, when I logged off and try to login agin using same user id & passwords as followed in step3 above, error "Entry does not exist" is displayed.
5. I tried again by creating new context (example 'acme2'), before doing this I removed the assignment of "System Default Cluster" to earlier created context i.e. 'acme1' and assigned the same to 'acme2'
6.Found the same error when I tried to login using same user id (enterprise) & password which I maintained for newly created context.
Do not know the exact issue. Pls help me or give me some clue.
Thanks,
HariHi,
I got it. incorrect "Host Name" was entered in cluster configuration.
After correcting this, I'm able to login now and hence I'm closing this question.
Thanks,
Hari -
Upgrade Stopped - Unable to logon to system
Windows 2003 Server 64bit , Sql 2005, Upgrade erp2004 -> erp2005.
Upgrade has stopped in phase startsap_nbas, and although the system will start you are unable to logon due to the error "error when initialising the work area SYST".
On investigation there seems to be a problem caused by the datatype change of field syst-modno (changed from char to int4 during 640->700). The trace for w0 is
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Jun 30 09:46:01 2007
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "700.08", patchlevel (0.109)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 116
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 3124
M
M kernel runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3124) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 12384 (952)
M DpShMCreate: sizeof(tm_adm) 4986416 (24808)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010640050, size: 5644672)
M DpShMCreate: allocated sys_adm at 0000000010640050
M DpShMCreate: allocated wp_adm at 0000000010641BF0
M DpShMCreate: allocated tm_adm_list at 0000000010644C50
M DpShMCreate: allocated tm_adm at 0000000010644CB0
M DpShMCreate: allocated wp_ca_adm at 0000000010B062E0
M DpShMCreate: allocated appc_ca_adm at 0000000010B0A930
M DpShMCreate: allocated comm_adm at 0000000010B0C0A0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B92D20
M DpShMCreate: allocated gw_adm at 0000000010B92DA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B92DD0
M DpShMCreate: allocated wall_adm at 0000000010B92DE0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Jun 30 09:46:02 2007
M ThInit: running on host mk2dev
M calling db_connect ...
C Thread ID:3144
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 116
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C np:(local) connection used on MK2DEV
C CopyLocalParameters: dbuser is 'dev'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28160000 bytes), 500 dynamic statements (2756000 bytes), total 30916088 bytes
C Using shared procedure name cache MK2DEV_DEVDEV_DEV_MEM initialized by another process.
C Connected to db server : [MK2DEV] server_used : [np:(local)], dbname: DEV, dbuser: dev
C pn_id:MK2DEV_DEVDEV_DEV
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070630 094602 MK2DEV
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Sat Jun 30 09:46:05 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000017820050, size: 5000000)
M SHM_ROLL_AREA (addr: 000007FFE6B90050, size: 218726400)
M SHM_PAGING_AREA (addr: 0000000017CF0050, size: 95682560)
M
M Sat Jun 30 09:46:06 2007
M SHM_ROLL_ADM (addr: 000000001D840050, size: 2183680)
M SHM_PAGING_ADM (addr: 000000001DA60050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 000000001DAF0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 000000001DB40050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B Table statistics is switched off.
B dbtbxbuf: Buffer TABL (addr: 000000001FFE0160, size: 8000000, end: 0000000020781360)
B dbtbxbuf: Buffer TABLP (addr: 0000000020790160, size: 2048000, end: 0000000020984160)
B dbexpbuf: Buffer EIBUF (addr: 00000000209A0170, size: 4096000, end: 0000000020D88170)
B dbexpbuf: Buffer ESM (addr: 0000000020D90170, size: 4194304, end: 0000000021190170)
B dbexpbuf: Buffer CUA (addr: 00000000211A0170, size: 2048000, end: 0000000021394170)
B dbexpbuf: Buffer OTR (addr: 00000000213A0170, size: 4194304, end: 00000000217A0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012E7ACA0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 0 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000298000C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029800460
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1248 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 6968kb, dir_size: 6912kb.
A Attached to PXA (address 000007FFF3C50050, size 200000K)
A abap/pxa = shared protect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4F27E000 leng=20955136 end=000007FF5067A000)
A >> Shm MMADM area (addr=000007FF4F64A1A0 leng=261120 end=000007FF4F689DA0)
A >> Shm MMDAT area (addr=000007FF4F68A000 leng=16711680 end=000007FF5067A000)
A RFC Destination> destination mk2dev_DEV_00 host mk2dev system DEV systnr 0 (mk2dev_DEV_00)
A RFC Options> H=mk2dev,S=00,d=1,
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 26874 bytes at 0000000029920050
N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\DEV\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is e:\usr\sap\DEV\sys\exe\run\sapcrypto.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...pass SECUDIR E:\usr\sap\DEV\DVEBMGS00\sec returned 0 .
N ===...sucessfully completed.
N =================================================
M *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c 988]
M *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c 1269]
M *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c 261]
M *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c 268]
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A
A Sat Jun 30 09:46:26 2007
A *** ERROR => Table SYST Field MODNO : Type should be 172, but is 40. [sapicc.c 1082]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sat Jun 30 09:46:26 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#16 $ SAP.
A Function ab_isyst Line 1406.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
and then this error repeats continuously....
As this is during the 'Switch' phases I checked the table DD03L and DD03L~(shadow) and altered to live table accordingly to see if this eliminated the error. The trace describes the expectation of type 172 not 40 - but not sure which one the kernel wants - i even tried to revert the shadow table to char1.
I would appreciate any pointers that you may have.
Thanks.Hello,
Were you able to proceed. We are also facing a similar problem. The EU_IMPORT phase has shutdown the SAP instance and then upon starting it does not allow you to login.
The message is "error when initializing the work area SYST"
Pls let us know how did you get rid of this issue.
Pls also reply to my email address [email protected]
Thanks in advance.
Regards
-Charu -
Upgrade Stopped - Unable to logon system
Windows 2003 Server 64bit , Sql 2005, Upgrade erp2004 -> erp2005.
Upgrade has stopped in phase startsap_nbas, and although the system will start you are unable to logon due to the error "error when initialising the work area SYST".
On investigation there seems to be a problem caused by the datatype change of field syst-modno (changed from char to int4 during 640->700). The trace for w0 is
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Sat Jun 30 09:46:01 2007
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll' is "700.08", patchlevel (0.109)
B New connection 0 created
M sysno 00
M sid DEV
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 116
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 3124
M
M kernel runs with dp version 232(ext=109) (@(#) DPLIB-INT-VERSION-232)
M length of sys_adm_ext is 364 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3124) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 12384 (952)
M DpShMCreate: sizeof(tm_adm) 4986416 (24808)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1616)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010640050, size: 5644672)
M DpShMCreate: allocated sys_adm at 0000000010640050
M DpShMCreate: allocated wp_adm at 0000000010641BF0
M DpShMCreate: allocated tm_adm_list at 0000000010644C50
M DpShMCreate: allocated tm_adm at 0000000010644CB0
M DpShMCreate: allocated wp_ca_adm at 0000000010B062E0
M DpShMCreate: allocated appc_ca_adm at 0000000010B0A930
M DpShMCreate: allocated comm_adm at 0000000010B0C0A0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 0000000010B92D20
M DpShMCreate: allocated gw_adm at 0000000010B92DA0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0000000010B92DD0
M DpShMCreate: allocated wall_adm at 0000000010B92DE0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Jun 30 09:46:02 2007
M ThInit: running on host mk2dev
M calling db_connect ...
C Thread ID:3144
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\DEV\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 116
C patchcomment MSSQL: Transaction inconsistencies HOTNEWS (1067103)
C np:(local) connection used on MK2DEV
C CopyLocalParameters: dbuser is 'dev'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Provider Release:9.00.3042.00
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C Cache sizes: header 88 bytes, 20000 names (28160000 bytes), 500 dynamic statements (2756000 bytes), total 30916088 bytes
C Using shared procedure name cache MK2DEV_DEVDEV_DEV_MEM initialized by another process.
C Connected to db server : [MK2DEV] server_used : [np:(local)], dbname: DEV, dbuser: dev
C pn_id:MK2DEV_DEVDEV_DEV
C Using MARS (on sql 9.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070630 094602 MK2DEV
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Sat Jun 30 09:46:05 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000017820050, size: 5000000)
M SHM_ROLL_AREA (addr: 000007FFE6B90050, size: 218726400)
M SHM_PAGING_AREA (addr: 0000000017CF0050, size: 95682560)
M
M Sat Jun 30 09:46:06 2007
M SHM_ROLL_ADM (addr: 000000001D840050, size: 2183680)
M SHM_PAGING_ADM (addr: 000000001DA60050, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 000000001DAF0050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 000000001DB40050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B Table statistics is switched off.
B dbtbxbuf: Buffer TABL (addr: 000000001FFE0160, size: 8000000, end: 0000000020781360)
B dbtbxbuf: Buffer TABLP (addr: 0000000020790160, size: 2048000, end: 0000000020984160)
B dbexpbuf: Buffer EIBUF (addr: 00000000209A0170, size: 4096000, end: 0000000020D88170)
B dbexpbuf: Buffer ESM (addr: 0000000020D90170, size: 4194304, end: 0000000021190170)
B dbexpbuf: Buffer CUA (addr: 00000000211A0170, size: 2048000, end: 0000000021394170)
B dbexpbuf: Buffer OTR (addr: 00000000213A0170, size: 4194304, end: 00000000217A0170)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000012E7ACA0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 0 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000298000C0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0000000029800460
S using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1248 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 6968kb, dir_size: 6912kb.
A Attached to PXA (address 000007FFF3C50050, size 200000K)
A abap/pxa = shared protect gen_local
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=000007FF4F27E000 leng=20955136 end=000007FF5067A000)
A >> Shm MMADM area (addr=000007FF4F64A1A0 leng=261120 end=000007FF4F689DA0)
A >> Shm MMDAT area (addr=000007FF4F68A000 leng=16711680 end=000007FF5067A000)
A RFC Destination> destination mk2dev_DEV_00 host mk2dev system DEV systnr 0 (mk2dev_DEV_00)
A RFC Options> H=mk2dev,S=00,d=1,
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 26874 bytes at 0000000029920050
N SsfSapSecin: putenv(SECUDIR=E:\usr\sap\DEV\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is e:\usr\sap\DEV\sys\exe\run\sapcrypto.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...pass SECUDIR E:\usr\sap\DEV\DVEBMGS00\sec returned 0 .
N ===...sucessfully completed.
N =================================================
M *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c 988]
M *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c 1269]
M *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c 261]
M *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c 268]
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITSP ICMAN is not active: Disable Kernel Web GUI functionality
W === ipl_Init() returns 2, ITSPE_DISABLED: Service is disabled (sapparam)
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A
A Sat Jun 30 09:46:26 2007
A *** ERROR => Table SYST Field MODNO : Type should be 172, but is 40. [sapicc.c 1082]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Sat Jun 30 09:46:26 2007
A
A ABAP Program ????????????????????????????????????????.
A Source Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#16 $ SAP.
A Function ab_isyst Line 1406.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
and then this error repeats continuously....
As this is during the 'Switch' phases I checked the table DD03L and DD03L~(shadow) and altered to live table accordingly to see if this eliminated the error. The trace describes the expectation of type 172 not 40 - but not sure which one the kernel wants - i even tried to revert the shadow table to char1.
I would appreciate any pointers that you may have.
Thanks.Dear,
how was the execution of EU_IMPORT* phases ?
We have experienced some similar issues where several errors has been reported in the EU_IMPORT* phases and after several repeats, the system got the experienced inconsistency.
We strongly guess that during these phases inconsistencies
occured that have led to the problem with table SYST.
Usually repeat the whole upgrade is the solution, if further issues occurs in EU_IMPORT*, you may contact SAP for further analysis. Please send me your comments.
Lucio Rodrigues
SAP AGS -
CSA and okclient.exe error during logons
Hi,
I am getting this error everytime we login to a W2K3 R2 SP2 system. I have tried the following:
-Uninstall and re-install the CSA client
-Checked Windows Services for the CSA service logon properties and it is set to local system account
-Disbaled CSA from the startup menu, rebooted. The error message did not appear at startup.
The CSA service (CSAControl.exe) starts Automatically at boot up without the okclient.exe running at startup. however
When I launch the okclient manaually after a reboot, the error returns. (The application failed to initialize properly (0XC06d004e).
Does anyone have any ideas on how to fix this?
ThanksHi sorry here is some more info:
-Its never worked as it is a new Installation of CSA version
-Its 32 Bit Windows
-CSA version is 5.1.0
-Error happens no matter what user logs into the system. CSA flag does not run in system tray either.
I do see the following that is suspicous
[2009-08-11 08:01:16.640] [PID=888] [Csamanager]: Failed to initialize Windows Firewall, error: 0x800706d9
[2009-08-11 08:01:16.640] [PID=888] [Csamanager]: Failed to update Windows Firewall status after 80 seconds, error: 0x800706d9 - The method failed because the Windows Firewall, Internet Sharing Service (SharedAccess) was not running.
[2009-08-11 08:01:18.625] [PID=888] [Csamanager]: Failed to update CSA registration with Windows Security Center after 80 seconds (5 attempts), error: 0x8004100e - Namespace specified could not be found. Possible cause: SecurityCenter interface is not registered with the system; WMI repository may need to be rebuild.
I have attached some of the log files. -
Am unable to logon to icloud with my apple id password... message displayed verification failed
am unable to logon to icloud with my apple id password... message displayed verification failed
You are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Dear Experts,
I am unable to open ESR and IB in the PI portal.
When I click on the link for ESR or IB, I get the message "Unable to download application".
The actual error is "JNLP file truncated after 10k".
Exception
com.sun.deploy.net.FailedDownloadException: Unable to load resource: http://XXXXXXXXXX:50000/dir/directory/com.sap.xpi.ibdir.client.jar
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.downloadResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Console
#### Java Web Start Error:
#### Unable to load resource: http://XXXXXXXXXXXX:50000/dir/directory/com.sap.xpi.ibdir.client.jar
Versions
PI version - 7.1
IE version - 10
JRE version - 7 update 60 (32 bit)
Terminal OS - Windows 7 (64 bit)
Server OS - Unix
Resolution Steps Tried
I have tried Java versions Java 1.6 update 45, Java 1.6 update 35, Java 1.6 update 21 but none of them have worked.
I have tried setting the JAVA_HOME environment variable but it has not helped.
I have tried deleting the temporary internet files, clearing the browser cache memory, clearing the Java cache memory but none of them worked.
I have tried selecting 'Direct Connection' in JAVA Control Panel -> Network Setting
Any help will be much appreciated.
Thanks in advance.Troubleshooting PI ESR and Integration Builder Logon Issues - Process Integration - SCN Wiki
Try restoring the archives and see if that helps..
-> Administration
-> Repository/Directory (tab)
-> Java Web Start Administration
-> Restore Archives and Generate New Signature -
I am trying to setup Microsoft office mail and need assistance - I am receiving the error, unable to find server and DNS setting in the Network
Which version of OSX and what email provider are you using.
-
Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?
Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced. -
After updating to Mavericks, I have been unable to update iphoto, and when I attempt to, it says that These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. But no other appleID has ever been used on my computer, how could this be resolved?
Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.
-
AnyConnect - Posture Assessment Failed: Unable to get the available CSD version....
Hello all
I am attempting to get the HostScan posture assessment working so we can check that any device connecting to the ASA is a valid corporate asset.
I have installed the posture module onto our test client machine (Windows 8.1) using the following software:
anyconnect-posture-win-4.0.00061-pre-deploy-k9
Then in ASDM under Remote Access VPN > Host Scan Image I have uploaded the following package:
disk0:/hostscan_3.1.06073-k9.pkg
...and ticked the box 'Enable Host Scan/CSD'.
Under Remote Access VPN > Secure Desktop Manager I have configured an initial simple Prelogin policy to test it working, this simply just checks that the OS is Windows 8. A success should map this user to a Group Policy I have created that is mapped to a Connection Profile.
So, with all that said, when I try to connect I see that the AnyConnect client going through the motions: "Posture Assessment: Checking for updates....", after which I get a pop-up and error message:
"Posture Assessment Failed: Unable to get the available CSD version from the secure gateway"
A bit stumped here and haven't quite found much on the web as to how to resolve this.
Has anyone encountered this before? If so, can you advise on what I can do
By the way I am connecting using IKEv2 (IPsec) as these are the requirements and the AC version is 4.0.00061, ASA version: 9.2(1).
Many thanksHello
Please forgive the shameless bump. Was hoping someone could help?
Many thanks -
I have forgot my logon password and i have no hint can not get into my laptop.
hello everyone
I have forgotten my logon password and stupid me did not make a hint and now I can not access my macbook air. I went and tried other ways command r and still since i am new to mac never made a back up again stupid me. I then tried to re install the OS and it tell me that it does not see the start up OS system.
I need my mac since this is the only form of entertainment on my ship in which i work on and am leaving this week. PLEASE someone help me.....
Thanks
Robin.There are different ways to reset the password depending on the Mac OS X version you are running. You can check it in > About this Mac.
If it's 10.6 or older, see "Resetting your original administrator account password" > http://support.apple.com/kb/HT1274 Also, see > https://discussions.apple.com/docs/DOC-5381
If it's 10.7 or 10.8, try resetting your password with your Apple ID by following the steps of the link above. If it doesn't work, reset the password using Recovery > http://discussions.apple.com/docs/DOC-4101 -
The iTunes on my desktop is no longer recognizing any of my devices (iPads, iPods, or iPhones). I am unable to sync. And when I connect a device I am asked on the device if I "Trust this Computer". When I hit "Trust" nothing happens. Help?
Hello monkeymonkeydo,
To get this fixed use the steps found here:
iPod not recognized in 'My Computer' and in iTunes for Windows
Hope this helps.
~Julian -
Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.
" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Issue in Customizing the Logon Page and Replacing the Logon Panel Image
I have facing problem in Customizing the Logon Page and Replacing the Logon Panel Image in Hyperion Workspace 11.1.2.1. I have tried multiple time.
First Replacing the Logon Panel Image. I have following the steps given in admin guide of EPM workspace on page 25 and they are as follow
To replace the image that is displayed on the logon panel:
1 Create an image file named logon_panel.gif with dimensions that match previous image.
2 Rename the installed version of logon_panel.gif to logon_panel.gif.original in
%EPM_ORACLE_HOME% /common/epmstatic/bpmui/themes/<do for each
theme>/images_global. Move the logon_panel.gif file that you created in step 1 to this
directory.
3 Clear your browser cache.
Note: You do not need to restart the Hyperion Foundation Services - Manager Server.
But still I am getting the same default image on log in page.
The other problem I am facing is Customizing the Logon Page.
I am following the steps given in admin guide of EPM workspace on page 17 and they are as follow:
To customize the logon page:
1 Follow instructions in the topic Extract a file in the Workspace Web Application.
2 Backup file <temp directory>/war/WEB-INF/lib/bpmui.jar.
3 Extract the contents of <temp directory>/war/WEB-INF/lib/bpmui.jar to <temp
directory>/bpmui_jar/.. (*)
4 Backup file <temp directory>/bpmui_jar/WEB-INF/classes/com/hyperion/bpm/
Resources_en.properties.
5 Edit file <temp directory>/bpmui_jar/WEB-INF/classes/com/hyperion/bpm/
Resources_en.properties.
6 Search for the property bpm.logonCopyright.
Customizing the Logon Page 17
7 Modify the text to the right of the equal sign. Use \n to get a new line.
8 Save your changes.
9 Repeat step step 1 through step step 8 for all the other Resources_xx.properties files for other
locales.
10 Jar the contents of <temp directory>/bpmui_jar/ to <temp directory>/war/WEBINF/
lib/bpmui.jar.
11 Continue with the topic, Re-package a file inside the Workspace Web Application.
For the first part I am following
Extract a file in the Workspace Web Application
ä To extract files in Workspace Web Application:
1 Stop the service for Hyperion Foundation Services - Managed Server.
2 Backup file <EPM_ORACLE_HOME>/products/Foundation/workspace/
InstallableApps/workspace.ear.
16 Administration Tools and Tasks
3 Using an unarchiving utility, extract the contents of <EPM_ORACLE_HOME>/products/
Foundation/workspace/InstallableApps/workspace.ear into a <temp
directory>.
4 Create <temp directory>/war.
5 Extract the contents of <temp directory>/workspace.war into <temp directory>/
war.
6 Update the file you are patching under <temp directory>/war. as direct in it.
But I am not able to find file bpmui.jar in step 3 of above one (*). I have marked for your connivance.
I am able to see these file in that directory
dynamichelp.jar
workspace.jar.
Can anyone provide help on this. Platform I am using is LINUXYou seem to have posted this in the wrong forum. This forum is for Oracle Enterprise Manager - not Hyperion.
Maybe you are looking for
-
Is it possible to have filters for one account on 3 devices ? And have the same results/folders.
I have one email account on 3 devices and I need to filter all received emails, on all 3 devices. Same folders and same filters. If I create a filter rule on one PC then I can't find the filtered emails ( that are in the new created folder on PC no.1
-
Purchase requisition number Range in MRP Run (MD02)
Hi Experts , When I run the MRP through T-Code MD02 even in test mode the Purchase requisition number getting consumed with out saving the entries. for eg:- number range = 100 to 200. when I execute the MD02 by selecting the indicator "Display result
-
Iphoto '11 cannot find photo library
when I open iPhoto '11 on Mountain Lion it cannot fid the photo libraries it was used to create. they are in the Pictures Directory but it does seem to recognize that they are there. This causes problems when I go to syn in itunes and tell it to us
-
taking to long to update. what if i dnt want to restore it? what can i do because now when i switch oon it it says connect to itunes
-
Hi Hussein/helios, I am applying patch 7303033 for our new setup EBS R12.1.1 64bit OEL5.3. But I encountered this error: Starting link of product 'fem' on Fri Feb 26 16:05:15 PHT 2010 Current product is fem Current product _TOP is $FEM_TOP Current