UCCX 8.0 Accessing ECC Vars through custom Java

In a UCCX script, how can I access the ECC Vars within custom Java?
I  know how to pull them in the UCCX script using the "Get Enterprise Call  Info" step.  I want to grab all of the ECC key value pairs without  knowing how many there are or their names.
I'm new at this so any help would be wonderful thank you.

Lauren Beal wrote:I'm new at this so any help would be wonderful thank you.
I can assure you that your being new to this is not relevant in regards to what you are asking for.  I have been doing this a long time, and would bet there is maybe one person on this forum that can answer your question.
Until he answers, I will offer you this:
Instead of trying to access the ECC directly from within the Custom Java, how about storing the data for ECC into a two-dimensional array.  Now, you can write your ECC values by accessing the array indices, as well as pass your array into the a method of your custom class.  It's a workaround for what you really asked for, but I'm not knowledgeable enough to know that it's even possible.
E.g.,
String[][] my_ecc_data = new String[] {new String {"first_ecc", "value1"}, new String[] {"second_ecc", "value2"}}
Good luck and happy scripting!
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Similar Messages

  • UCCX Accessing ECC Vars through custom Java

    In a UCCX script, how can I access the ECC Vars within custom Java?
    I know how to pull them in the UCCX script using the "Get Enterprise Call Info" step.  I want to grab all of the ECC key value pairs without knowing how many there are or their names.
    I'm new at this so any help would be wonderful thank you.

    Hi Lauren,
    You are probably better off posting this over in Contact Centre section of the boards
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/contact-center?view=discussions
    Cheers!
    Rob
    "And if I should fall behind
    Wait for me" - Springsteen

  • Accessing Active-Directory through a Java Swing Desktop Appl

    I have a desktop application in which, I have an options window. In the window, I use a button to access the active directory(address-book) - when I click the button, the active directory window(the way the address book opens in microsoft-outlook) should open.
    I wish to know where can I find information to implement this requirement. It would be even better if there's a solution posted!

    Find how to do that from the command line. Perhaps there's an executable you can run or something like that. (Note that this is not a Java Programming question but something to do with your operating system.) Then use a ProcessBuilder to do that command-line thing.

  • Is accessing a servlet through a java client possible.

    Is it possible to call a servlets method (say doPost) from a standalone java application?
    How can we do this?
    I think for connecting to a servlet I would need to create an HTTP Request object and pass it to a specific URL. This is what the browser does. Am I right?

    If you only need to make a GET request and receive the generated content without much interaction, URL and HttpURLConnection can do it without too much pain ;-)

  • Unable to connect to ECC system through stand alone JAVA program using JCO.

    Hi All,
    I want to connect to ECC system through standalone JAVA program using jco.while executing my java program it is saying that connection refused.
    I am getting the error as shown below.
    com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CMALLC : rc=20 > Co
    nnect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=192.168.10.99, GWSERV=sapgw01, SYSNR=01
    LOCATION    SAP-Gateway on host igm501 / sapgw01
    ERROR       partner '192.168.10.99:sapgw01' not reached
    TIME        Mon Sep  1 15:00:37 2008
    RELEASE     700
    COMPONENT   NI (network interface)
    VERSION     38
    RC          -10
    MODULE      nixxi.cpp
    LINE        2821
    DETAIL      NiPConnect2
    SYSTEM CALL connect
    ERRNO       239
    ERRNO TEXT  Connection refused
    COUNTER     2
            at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
            at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:11
    25)
            at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
            at JConnector_frmDesk.<init>(JConnector_frmDesk.java:91)
            at JConnector_frmDesk.main(JConnector_frmDesk.java:141)
    I have already configured SAPDP01,SAPGW01 in my services file in windows\system32\drivers\etc\services.
    What else i need to do to connect to ECC system through my JAVA program.Please help me in this regard.
    Regards,
    Ramana.

    Hi !
    Check this to verify that you are correctly using JCO:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
    Try to give in ashost="/H/saprouter/H/sap".
    Regards,
    Matias.

  • Executing WLST scripts through InstallAnyWhere Java code

    We are trying to execute WLST scripts (embedded java mode) through custom Java class of the InstallAnywhere. We could not able to succeed in that, gives error "Weblogic.Home" not found. After passing this parameter we got "WLST_offline" class not found. We have included Weblogic.jar & config.jar in the Insatllanywhere Path, now we are getting NPE in readTemplate command.
    Suggest us the right way to do so.
    Thanks

    Typically the environment is set up using a Domain's setDomainEnv.cmd or setDomainEnv.sh scripts, you may want to see if there is anything obvious in the script environment setup that you are missing.

  • Access metadata fields through a custom Service Class

    Hi all,
    I have to create a custom component for Oracle Content Server. I need to access metadata fields from a custom Service Class.
    Can you directly access metadata through a java class or to pass parameters (metadata fields) from a web page to java class? How?
    Are there other solutions?
    Thanks, ale

    I'm not sure if I understand exactly what you are after, but here is some information.
    If your url is http://someserver/idc/idcplg?IdcService=CUSTOM_SERVERY&Parm1=A&Parm2=B
    Then in your java code you can use the binder.getLocal method to get those values.
    String strParm1 = binder.getLocal("Parm1");
    you may have to use binder or m_binder (depends on the variable name in your specific situation).

  • Upgrade to Creative Cloud 7 days ago - still no access to full products customer service not helpful

    I upgraded to the full Creative Cloud access on the 13th of April through customer service. I saw a promotional offer for $29.99/month for access to all the CC apps, but since I was already signed up for Premiere Pro CC at $19.99/month it said I needed to speak to customer service to upgrade.
    I did that. The customer service rep upgraded my service to $29.99/month and assured me that I would now have access to the full creative suite.
    You can see that I was billed for $29.99 on April 13th:
    After that upgrade nothing changed on my end. I had full access to Adobe Premiere CC like before, but otherwise all other programs(photoshop, illustrator, etc) still downloaded and ran as trial versions. I contacted customer service two more times. They were unable to resolve the problem and only escalated the ticket.
    I have not had any response from either ticket. And looking at it now it looks like one of them is listed as "withdrawn" with no notes from Adobe's end and no resolution to my problem. The other ticket is still open pending Adobe's response.
    To top it all off today in Premiere CC I received a notice that I would lose access to Premiere in 5 days because of some error in the billing information. So in 5 days time I will be paying $29.99/month and have access to zero Adobe products.
    So I'm writing this post in hopes of actually getting someone that can solve my problems to take a look. I don't want to spend another 2 hours in a chat-box with an overseas customer service rep who only copys and pastes pre-formatted responses to me. I don't want my ticket escalated and then ignored. I want the service that I paid for, or I want my money refunded.
    What I think happened is that the customer service rep who upgraded my membership to the full creative cloud suite forgot to flip some switch. It seems like they increased my billing rate but didn't actually change my subscription.
    Here's the picture that shows exactly what service shows up in my account:
    Here's what my creative cloud app shows - notice that I only have access to trial versions of most of the software:
    Please don't tell me to try logging out of creative cloud, or deleting files on my end, or check my DNS settings, or any of that. I've been through it - twice - with your customer service reps already. It did nothing. The issue is on Adobe's side. Somewhere in some database my account is not set to full creative cloud access. There is nothing I can do on my end to rectify this.
    Please - I would either like this rectified, or have my money refunded. Anything else is unacceptable. And as a whole my experience with customer service has been frustrating, unhelpful, and not up to the standards I expect from a high-class company like Adobe.

    Have you logged out of your Cloud subscription and then back in?
    Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    or these
    Upgrade single to all Cloud http://forums.adobe.com/thread/1235382
    http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html

  • Facing problem to Use a custom Java class in UCCX

    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0in 5.4pt 0in 5.4pt;
    mso-para-margin-top:0in;
    mso-para-margin-right:0in;
    mso-para-margin-bottom:10.0pt;
    mso-para-margin-left:0in;
    line-height:115%;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;}
    Hi,
    We are using Communication manager 7.0.1 and UCCX version 7.0.1(Cisco Unified CCX Premium).  We are trying to call a Custom Java class file from UCCX scripting. We have followed the steps mentioned in the guide (How-To: Using a custom Java class in UCCX 5.x (SOAP Example)). See below link.
    http://www.avholloway.com/vtools/ipcc/custom-java/soap/
    After completed all the steps we have got the variable type SimpleSOAP at script but we did not found it to object constructors or object attributes (plz find the attached screenshots). We will appreciate if you plz guide us to solve the issue.
    Thanks
    Fakhrul
    LEADS Corporation Ltd.

    Hello, Fakhrul.
    I'm sorry to see you were not able to find the information or help you were looking for here in the Contact Center community forum.
    You may be able to find more help through the Cisco Developer Network.
    Also, you might want to consider engaging Cisco Advanced Services via your account team to assist with UCCX custom scripting.
    Thank you, and good luck.
    -Paulo

  • Accessing components vars.

    Hi,
    How do I access a var in a differint component? I have two custom components in the same application and need to get the variable (arrayCollection) from one to populate a chart in the other.

    Thanks Benji,
    ListItems Component
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init(), reloadData()" height="95%" width="100%" backgroundAlpha="0">
    <mx:Script>
         <![CDATA[
              import mx.core.Application;
              import mx.collections.ArrayCollection;
              import mx.containers.Box;
              import mx.controls.Alert;
              import mx.events.DragEvent;
              import flash.net.navigateToURL;
              import mx.events.StateChangeEvent;
              import mx.controls.ComboBox;
              import mx.controls.LinkButton;
              import mx.containers.VBox;
              import mx.controls.CheckBox;
              import mx.controls.Text;
              import mx.containers.HBox;
              import mx.collections.XMLListCollection;
              import mx.rpc.events.ResultEvent;
              import mx.managers.CursorManager;
              import flash.text.TextField;
              namespace ink = "http://www.inktomi.com/";
              use namespace ink;
              //     Archive Vars
              [Bindable] private var xmlList:XMLList;
              [Bindable] private var listCollection:XMLListCollection;
              [Bindable] private var listData:XML;
              [Bindable] public var serviceURL:String = "http://boss.yahooapis.com/ysearch/news/v1/";
              [Bindable] public var searchFor:String = "biotechnology%20AND%20biotech";  
              private const PROXY:String = "http://localhost/employeePhoneDesktop/src/php/proxy.php?url=";
              private const APIID:String = "?appid=######
              private const PARAMS:String = "&format=xml&orderby=date";
              private var reload:Timer;
              //     Archive Vars
              private var vBox:VBox;
              private var hBox:HBox;
              private var titleText:LinkButton;
              private var itemInfo:Text;
              private var abstract:Text;
              private var archive:CheckBox;
              private var rateItem:ComboBox;
              private var category:ComboBox;
              private var container:VBox;
              private var clickURL:Text;
              private var canvas:Canvas;
              private var titleFormat:TextFormat;
              //     Archive Vars
              /*[Bindable]
              public var newsDB:ArrayCollection = new ArrayCollection( [
                     { title: null, clickURL: null, info: null, abstract: null, category: null, rateItem: null }
             public var newsDB:ArrayCollection = new ArrayCollection;
              private function init():void {
                   listService.send()
                   CursorManager.setBusyCursor();
              private function getData(e:TimerEvent):void{
                   listService.send()
                   CursorManager.setBusyCursor();
                   removeChild(container);
              private function reloadData():void {
                   reload = new Timer(10000, 10);
                   //reload.start();
                   reload.addEventListener(TimerEvent.TIMER, getData);
                   //trace(reload.delay);
                   //reload.addEventListener(TimerEvent.TIMER_COMPLETE,
              private function resultHandler(e:ResultEvent):void {
                   listData = e.result as XML;
                   // add the imems to an XMLList and XMLListCollection
                   // so that they can be used with the repeater class
                   // and update automatically
                   xmlList = e.result.resultset_news.result as XMLList;
                   listCollection = new XMLListCollection(xmlList);
                   CursorManager.removeBusyCursor();
                   // populate the layout with datd
                   createLayout();
              private function createLayout():void {
                   container = new VBox();
                   var categoryLabels:Array = new Array("Health","Industrial","Emerging Tech","Food & Ag");
                   var rateLabels:Array = new Array("Positive","Neutral","Negative");
                   for(var i:int=0; i<listCollection.length; i++) {
                        //vBox = new VBox();
                        canvas = new Canvas();
                        hBox = new HBox();
                        titleText = new LinkButton();
                        titleFormat = new TextFormat();
                        itemInfo = new Text();
                        abstract = new Text();
                        archive = new CheckBox();
                        rateItem = new ComboBox();
                        category = new ComboBox();
                        clickURL = new Text();
                        titleText.label = listCollection.getItemAt(i).title;
                        //titleText.addEventListener(MouseEvent.DOUBLE_CLICK, getURL);
                        titleText.addEventListener(MouseEvent.CLICK, getURL);
                        titleText.width = 400;
                        clickURL.text = listCollection.getItemAt(i).clickurl;
                        clickURL.visible = false;
                        clickURL.includeInLayout = false;
                        itemInfo.text = listCollection.getItemAt(i).source + " | " + listCollection.getItemAt(i).date;
                        itemInfo.y = 25;
                        abstract.text = listCollection.getItemAt(i).abstract;
                        abstract.y = 42;
                        abstract.visible = true;
                        abstract.includeInLayout = true;
                        abstract.width = 400;
                        abstract.height= 60;;
                        archive.label = "Archive";
                        category.prompt = "Category";
                        category.dataProvider = categoryLabels;
                        category.rowCount = categoryLabels.length;
                        category.visible = false;
                        category.includeInLayout = false;
                        category.width = 95;
                        category.height = 20;
                        rateItem.prompt = "Rate";
                        rateItem.dataProvider = rateLabels;
                        rateItem.visible = false;
                        rateItem.includeInLayout = false;
                        rateItem.width = 95;
                        rateItem.height = 20;
                        canvas.addChild(titleText);
                        canvas.addChild(clickURL);
                        canvas.addChild(itemInfo);
                        canvas.addChild(abstract);
                        canvas.addChild(hBox);
                        hBox.addChild(archive);     
                        hBox.addChild(category);
                        hBox.addChild(rateItem);
                        hBox.y = abstract.y + 60;
                        hBox.percentWidth = 80;
                        hBox.percentHeight = 80;
                        archive.addEventListener(Event.CHANGE, toggleArchive);     
                        container.addChild(canvas);          
                   container.x = 10;
                   container.y = 10;
                   addChild(container);
       // If someone chooses to archive the item, set the properties of the
       // ComboBoxes (visible & includeInLayout) to true
       private function toggleArchive(e:Event):void {
             var chb:CheckBox = e.currentTarget as CheckBox;
             var hBox:HBox = chb.parent as HBox;
             var len:int = hBox.numChildren;
             for(var i:int=0; i<len; i++) {
                   var cb:DisplayObject = hBox.getChildAt(i);
                   if((cb is ComboBox)) {
                    // toogle visibility and include in layout
                    (cb as ComboBox).visible = chb.selected;
                    (cb as ComboBox).includeInLayout = chb.selected;
       // Called when someone clicks on the titleLink. This function pulls the
       // origional website URL up in a seperate browser window
       private function getURL(e:MouseEvent):void {
                 var link:LinkButton = e.currentTarget as LinkButton;
                 var canvas:Canvas = link.parent as Canvas;
                 var clickURL:Text = canvas.getChildAt(1) as Text;
                 var url:URLRequest = new URLRequest(clickURL.text);
                 navigateToURL(url);
              trace(clickURL.text);
      /* private function showAbstract(e:MouseEvent):void {
                    var link:LinkButton = e.currentTarget as LinkButton;
                 var canvas:Canvas = link.parent as Canvas;
                 var abstract:Text = canvas.getChildAt(3) as Text;
                 var hBox:HBox = canvas.getChildAt(4) as HBox;
                 link.removeEventListener(MouseEvent.CLICK, showAbstract);
                 link.addEventListener(MouseEvent.CLICK, hideAbstract);
                 abstract.visible = true;
                 abstract.includeInLayout = true;
                 while(abstract.hitTestObject(hBox) == true){
                      hBox.y += 1;
                 trace(canvas.getChildren());
       private function hideAbstract(e:MouseEvent):void {
                    var link:LinkButton = e.currentTarget as LinkButton;
                 var canvas:Canvas = link.parent as Canvas;
                 var abstract:Text = canvas.getChildAt(3) as Text;
                 var hBox:HBox = canvas.getChildAt(4) as HBox;
                 link.removeEventListener(MouseEvent.CLICK, hideAbstract);
                 link.addEventListener(MouseEvent.CLICK, showAbstract);
                 abstract.visible = false;
                 abstract.includeInLayout = false;
              hBox.y = 35;
                 trace(abstract.text);
       public function archiveData():void {
                 var containerArray:Array = container.getChildren() as Array;
                 for(var i:int=0;i<containerArray.length;i++){
                 //for(var i:int=0;i<1;i++){
                      var canvas:Canvas = container.getChildAt(i) as Canvas;
                      var titleText:LinkButton = canvas.getChildAt(0) as LinkButton;
                      var clickURL:Text = canvas.getChildAt(1) as Text;
                      var itemInfo:Text = canvas.getChildAt(2) as Text;
                      var abstract:Text = canvas.getChildAt(3) as Text;
                      var hBox:HBox = canvas.getChildAt(4) as HBox;
                      var archive:CheckBox = hBox.getChildAt(0) as CheckBox;
                      var category:ComboBox = hBox.getChildAt(1) as ComboBox;
                      var rateItem:ComboBox = hBox.getChildAt(2) as ComboBox;     
                      if(archive.selected == true){
                        newsDB.addItem( {
                        title: titleText.label,
                        clickURL: clickURL.text,
                        info: itemInfo.text,
                        abstract: abstract.text,
                        category: category.selectedLabel,
                        rateItem: rateItem.selectedItem });                    
                      trace(newsDB[0].title);
       private function archiveSuccess():void {
                 Alert.show("Your clips have been successfully saved","Archive Complete");        
       private function archiveFault():void {
                 Alert.show("Your clips have not been saved. Please contact an administrator.","Archive Error");
         ]]>
    </mx:Script>
         <mx:HTTPService id="listService" url="{serviceURL + searchFor + APIID + PARAMS}" result="resultHandler(event)" resultFormat="e4x"/>
    </mx:Canvas>
    Main mxml
    <?xml version="1.0" encoding="utf-8"?>
    <mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml"
         layout="absolute"
         xmlns:com="components.*"
         backgroundGradientAlphas="[1.0, 1.0]"
         backgroundGradientColors="[#EDF4FF, #C6D9FF]"
         width="800" height="600"
         backgroundAlpha=".75"
         title="  Media Trap Beta V1.1"
         titleAlignment="left"
         creationComplete="init()">
         <mx:Script>
              <![CDATA[
              ]]>
         </mx:Script>
         <mx:Style source="assets/style.css" />
         <mx:Label x="19" y="14" text="Media Trap" fontWeight="bold" fontSize="20"/>
         <mx:Label x="20" y="38" text="beta 1.1"/>
         <mx:TabNavigator id="navigator" width="450" height="89%"  x="20" y="61">
              <mx:VBox label="News">
                   <com:listItems id="newsFeed" name="newsFeed" backgroundColor="#FFFFFF" x="0" y="0" height="100%">
                   </com:listItems>
              </mx:VBox>
              <mx:VBox label="Blogs">
                   <mx:Text text="Blog Coverage"/>
              </mx:VBox>
              <mx:VBox label="Twitter">
                   <mx:Text text="Twitter Coverage"/>
              </mx:VBox>
              <mx:VBox label="Video">
                   <mx:Text text="Video Coverage"/>
              </mx:VBox>
         </mx:TabNavigator>
         <mx:Button x="348" y="36" label="Archive Selected" click="newsFeed.archiveData()"/>
         <!--<com:currentArchiveChart id="currentCats" x="478" y="81" height="212" />-->
    </mx:WindowedApplication>
    Charting Component
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Canvas xmlns:mx="http://www.adobe.com/2006/mxml" width="300" height="346" xmlns:com="components.*" creationComplete="init()" >
        <mx:Script>
            <![CDATA[
            import mx.core.Application;
            import mx.collections.ArrayCollection;
              // testing variable
            [Bindable]
            private var medalsAC:ArrayCollection = new ArrayCollection( [
                { Country: "USA", Gold: 35, Silver:39, Bronze: 29, Test: 20000 }
            private function init():void{
                 trace(mx.core.Application.application.myListItems.newsDB as ArrayCollection);
                 medalsAC.addItem( { Country: "Canada", Gold: 75, Silver:39, Bronze: 29 });
                 medalsAC.addItem( { Country: "England", Gold: 100, Silver: 200, Bronze: 100 });
            private function displayGold(data:Object, field:String, index:Number, percentValue:Number):String {
                var temp:String= (" " + percentValue).substr(0,6);
                return data.Country + ": " + '\n' + "Total Gold: " + data.Gold + '\n' + temp + "%";
            ]]>
        </mx:Script>
             <mx:Label id="archiveTitle" x="10" y="10" text="Current Archive " fontSize="14" fontWeight="bold"/>
             <mx:PieChart id="chart" height="130" width="300" color="0x323232"
                showDataTips="false" dataProvider="{medalsAC}"  y="22">
                <mx:series>
                    <mx:PieSeries labelPosition="callout" field="Gold">
                    </mx:PieSeries>
                </mx:series>
            </mx:PieChart>
    </mx:Canvas>

  • Accessing smart card through internet

    I want to make an application that will do the following : I want to have a webpage(for example an order form at an e-shop site) to access the smart card at a remote computer over the internet (the customer's pc) and get some information from an array in the card (e.g the shipping address and his name)....Is it possible to do that or the security restrictions (java applet restrictions) will not allow me to ? If so has anybody any ideas of how it could be done? The same opencard commands (e.g sendCommandApdu() ) work for accessing a card through the internet or do I have to use anything different???Thank you ...

    Sir,
    Even I am looking for a similar application Online Banking application
    But in that case the bank has to authenticate the user using some info that the card stores
    How does the bank achieve the same?
    What is the cards role in this regard
    Where does cryptology come into this
    I would be happy top know these details
    Regards
    Kumar

  • Send data to ECC table through RFC Call function from SAP B1 via  b1if

    Hi,
    I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
    So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
    Thanks

    Solved by my own.

  • How to access report designer in customer system

    How to access report designer in customer system as we dont have direct acces to Customer BI System. Is there sny transaction code for report designer/web application designer or we can go through RRMX.
    Thanks in Advance.

    Hi
    If I got your question properly, You need authorization for the accessing Client System. You can see the Reports at RSRT , RRMX may also lead to Query Analyser.
    Hope it helps

  • Can we enter data in any standard table directly through custom form??

    Dear All,
    Can we enter data in any standard table directly through custom form??
    I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
    Awaiting regards,

    Hi,
    Can we enter data in any standard table directly through custom form??
    I have create custom form in R.12. I want to insert data in quality standard table directly through custom form. Need experts guideline.
    Awaiting regards,
    I would not recommend touching the standard tables at all unless you are being guided by the SR. For a record to be in the standard table it should go through series of validations based on the what operation you are performing and some times datas are dependent upon the other tables, and also some times the same records are hit to so many other tables simultaneously.
    Therefore I would not recommend this brother.
    Thanks &
    Best Regards,

  • User is locked in R/3 but still access the application through portal

    We are currently on NW2004s SP10 .
    We locked the User A in R/3 SRM backend system and from Enterprise Portal the same User A login and try to access the SRM application in backend . The system is allowing to access which we want to prevent .
    The authentication ticket type is "SAP Logon Ticket" .  The User A is trying to access ITS services through Portal.
    Do we have specific SSO parameter which needs to set in backend SRM application .
    Thanks
    Chandrashekhar K

    Hi
    We have maintained the following profile parameter for SSO in our SRM system . From portal we are accessing the SRM system
    login/accept_sso2_ticket          1          
    login/certificate_request_ca_url     https://tcs.mySAP.com/invoke/tc/usercert               
    login/certificate_request_subject     CN=&UNAME, OU=&WPOU, O=mySAP.com User, C=DE               
    login/create_sso2_ticket          0               
    login/disable_cpic               0          
    login/disable_multi_gui_login          0          
    login/disable_multi_rfc_login          0               
    login/disable_password_logon          0               
    login/failed_user_auto_unlock          0          
    login/fails_to_session_end          3               
    login/fails_to_user_lock          3          
    login/isolate_rfc_system_calls          0               
    login/min_password_diff               1          
    login/min_password_digits          0               
    login/min_password_letters          0               
    login/min_password_lng               6          
    login/min_password_specials          0               
    login/multi_login_users               HP          
    login/no_automatic_user_sapstar          1          
    login/password_change_for_SSO          0          
    login/password_charset               1          
    login/password_expiration_time          60          
    login/password_logon_usergroup                         
    login/password_max_new_valid          0               
    login/password_max_reset_valid          0               
    login/system_client               400
    login/ticket_expiration_time          60
    login/ticket_only_by_https          0
    login/ticket_only_to_host          0
    login/ticketcache_entries_max          1000
    login/ticketcache_off               0
    login/update_logon_timestamp          m
    Please suggest as to change any parameter value . We want to restrict the user to access SRM system from portal if he is locked int e SRM system.
    Thanks

Maybe you are looking for

  • Open taskflow in new window

    I try to open taskflow in a new explorer window (no dialog) For that i use i go link and try to add a URL in Destination. eather if i use: MyTask-flow that gives url: http://127.0.0.1:8988/CallingFormsArtifact-ViewController-context-root/faces/MyTask

  • Same Apple ID but want different apps

    I have an iPhone, iPad and iPad mini - all using one single Apple ID and is synced with one iTunes account in my laptop. My queries are 1. When I sync my devices all the apps and files go to individual devices. But if don't want to have a particular

  • Nokia E90 firmware upgrade

    1)The new firmware must support album art(please nokia!!) 2)The stereo widening feature should be added.... 3)Images should be allowed to be taken from internal screen 4)It should also have much better ringtones... 5)New applications like yahoo go! t

  • Ssl comms in applet to stunnel server

    I'm using j2sdk1.4.2_08 in windows xp. I'm trying to do SSL comms in an applet to a 'stunnel' server. I followed all the useful directions I could find, but I keep getting 'No trusted certificate found' at the SSLStartHandshake statement. Running as

  • HT4623 how do you do this if your ipod is disabled?

    idk