UCCX 8.5 Demo License File
Hi,
Can anyone direct me to link where i can get Contact Center Express 8.5 Demo License File?
Thanks.
Hi
There is a DemoLicense folder on the DVD or ISO image, this contains four license files to demo the different editions available - std, prem, enh, ipivr...
Regards
Aaron
Please rate helpful posts..
Similar Messages
-
UCCX 8.51 demo license install issue
I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
Thanks,Hi,
License will come into picture when you are performing the UCCX initial app admin setup.
I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
Thanks,
Anand -
We are getting this message in AIX after upgrading the WL6.0 demo license file to a registered one.AIX LIBPATH=:/lib:/u01/app/oracle/product/8.1/lib:/home/webadm/sqllib/lib:/opt/bea/wlserver6.0/lib/aix:/opt/bea/wlserver6.0/lib/aixBad license fileproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullBad license fileBad license fileproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullproblem: m_gpairs is nullBad license file$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Hi Suresh,
You might want to post this onto the
weblogic.developer.interest.61beta.general newsgroup. The XML developers who
monitor this group don't know much about the license processor.
Regards,
-Todd
Suresh Kumar <[email protected]> wrote in message
news:3b4492da$[email protected]..
i have upgraded to wl6.1 ( actually i still have wl6.0 running underc:\bea
as well)... but having problems starting up the server..
its complaining about there beinf an empty license file.. when i knowthere
is a license file.. and i hhhave correctly run the UpdateLicense.cmd filetp
upgrade it with details from the license_new.bea file.
Here is the message when i run the server..
C:\bea\wlserver6.1_beta>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -cla
sspath .;.\lib\weblogic_sp.jar;.\lib\weblogi
c.jar -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver
"-Dbea.home=C:\bea" "-Djava.security.policy==C:\bea\wlserver6.
1_beta/lib/weblogic.policy" -Dweblogic.management.password=weblogic.Server
<05-Jul-01 17:05:30 BST> <Info> <Security> <Getting boot password from
user.>
Enter password to boot WebLogic server:
Bad license file
problem: BEA license Is Not Present
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
Bad license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
Empty license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
C:\bea\wlserver6.1_beta>goto finish
C:\bea\wlserver6.1_beta>cd config\mydomain
C:\bea\wlserver6.1_beta\config\mydomain>ENDLOCAL -
Cisco UCCX 9.0.2.10000-71 - Demo License Issues
Hello Cisco Support,
I have installed Cisco Unified Contact Express 9.0.2.10000-71 on a Cisco UCS C220 M3 Server and have used the demo license that comes with the ISO Image on the server. After install, I have used the Premium Demo License. I have integrated UCCX 9.0 with CUCM 8.6(2) SU2.
I can say that everything worked fine until I wanted to test the Cisco Agent Desktop (CAD), Cisco Supervisor Desktop (CSD) and Cisco Agent IP Phone Service.
I am pretty much sure that the configuration on either the CUCM, UCCX is set up correctly but I might miss something.
When I tried to fire up the CAD or CSD, I am getting the following error message: "A licensing error has occurred. Please try again in five minutes. If the problem persists, please see your log files or System Administrator for details". then followed by License Server is down.
I have also setup Agent IP Phone Service on the CUCM and each time I select the Service on the IP Phone, an error stating that could not connect to the IP Phone Agent Service.
Below is the information for my setup:
admin:show uccx version
Active UCCX Version: 9.0.2.10000-71
Inactive UCCX Version: NA
admin:show uccx license
Configured Licenses:
Package: Cisco Unified CCX Premium
IVR Port(s): 50
Cisco Unified CCX Premium Seat(s): 25
High Availability : Enabled
Cisco Unified CCX Preview Outbound Dialer: Enabled
Cisco Unified CCX Quality Manager Seat(s): 25
Cisco Unified CCX Advanced Quality Manager Seat(s): 25
Cisco Unified CCX Workforce Manager Seat(s): 25
Cisco Unified CCX Compliance Recording Seat(s): 50
Cisco Unified CCX Maximum Agents: 400
Cisco Unified CCX Licensed Outbound IVR Port(s): 25
For dynamic content like the Inbound ports in use and Outbound ports available and in use please check using the Cisco Unified CCX Administration.
Command successful.
Could you please help me out figure out what could be the cause of me failing to log onto the CAD/CSD and also IP Phone Agent Service?
Warm regards,
JK.Hello Aman,
Thanks for the link.
How do I go about turning off the the SYN Flood Detection Mode state in Option 2 on the UCCX Server.
Option 2: Turn off SYN Flood detection mode. Risk: Leaves the server open to SYN Flood.
I have checked and my Windows XP SP3 computer where Cisco Agent Desktop is installed has Windows Firewall set to off at the moment.
Warm regards,
JK. -
UCCX 9.x - Problem to upload DEMO License on vmware install
Hi Guys,
I am trying installing the UCCX 9.X in VMWare machine and am searching the following problem:
Enter a license or zip file name
License File*
Validating uploaded license file...
Warning: No valid license feature lines found in the uploaded license(s).
Validation completed.
The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue.
The demo license was download from Cisco, and I used the license MAC to generate the license.
Any have Idea about this issues? Where stay the config repository?
Thanks,
WilsonHi Anthony,
Thanks a lot for your contact. Maybe I not explanated the correct problem or I didn´t understand that You said. I used the procedure that You wrote and not worked.
https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
I didn´t have problem to install the UCCX. This message is occurring when to do upload license.
Thanks,
Wilson -
DEMO LICENSE IN UCCX 10.0
Hi,
I tried to use Demo License for UCCX 10.0 which is in installtion Disk but I got the following error:
"The license cannot be added because, either the license config repository cannot be accessed or the license is invalid. Please specify a valid product license to continue."
It's extrange the license names in installation disk are (don't ask me why):
ccx90_enh_demo.lic
ccx90_ivr_demo.lic
ccx90_pre_demo.lic
ccx90_std_demo.lic
I' m running UCCX 10.0.0.95. I already tried to upload Enh and Pre license file. I already removed the license, restarted the server and tried the wizard process again but it didn;t work. I read this post too: https://supportforums.cisco.com/discussion/11896096/demo-license-uccx-90
Any help would be appreciated.
RegardsCan you get your hands on 10.0.1.10000.24 or later (SU1 is out now I believe as of 2 or 3 weeks ago)..because pre_demo is supposed to be in the same directory.
-
Anybody else experiencing this?
I upgraded from version 9.0.x to 10.6.1 at the end of December. It generated a Demo License (that wasn't needed) during the upgrade, which expired on Feb 27th.
I restarted the engine on the HA node last night, and it won't start up now.
On start-up, MCVD Log shows:
6953: Mar 09 10:55:03.978 EDT %MCVD-LIB_LICENSE-7-UNK:General Runtime Error in using m_FlexlmParser details are : Exception=java.lang.NullPointerException
The process stops reading/parsing licenses after this and acts like it would if it had no license.
Good thing this wasn't my primary engine.Yes,
That's what I ended up having to resort to. I had numerous demo licenses across the years because of rapid expansion of call volume (agent seat temp licenses to act as a bridge gap while permanent licenses were purchased and delivered).
It ended up being caused by two demo licenses that expired on the same day, it seems.
Just to add to your answer though... DO NOT DELETE THEM FROM THE GUI. This will put your engines out of service until all offending files are deleted, and may require a reboot even then.
Thanks... -
Uccx demo license disappears after reboot
hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to reupload the demo license, it generates an error. can anyone help me with this?
thanks in advance.What is the exact UCCX version?
If possible, share snapshot of error message.
regds,
aman -
Hey avery body
I want to get a demo license for uccx, How I can do ??
Best RegardsDemo licenses are included in the DVD or ISO of UCCX. You can find them in the \DemoLicense\ folder. There are four demo licenses. STD, ENH, PRE, and IPIVR.
If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00 -
Thought the MAC Address is correct in the License File, it shows invalid MAC Address while uploading.
Hi Gibin,
You need to provide the License MAC address (from UCCX 8.x version) for getting the licenses from Cisco.
Hope it helps.
Anand
Please rate helpful posts by clicking on the stars below the right answers !! -
Demo License UCCX 8.5(1)
Is there a demo license on the disc? Can someone upload it possibly?
ChadGot a question.
I'm using a HP MCS 7845 server with CME 7.1 in demo license mode. Also I have 5 7960 phones. So, can I use all the features such as SRST to practice for the voice exams with the demo license ?
Any help is always appreciated.
Sent from Cisco Technical Support iPhone App -
Hi,
I install the version 6 update 2 on my Solaris 7 sparc, with the demo license. But when I try to use cc I got this error
License Error : Licensing product (Sun WorkShop Compiler C SPARC).
License File:
/opt/SUNWspro/bin/../WS6U2/bin/../../license_dir/sunpro.lic,node
License file does not support this version
Feature:workshop.c.sparc
Application version > License version:6.000000 > 5.000
FLEXlm error:-21,126.
Any idea?
ThanksHI,
Please check and make sure your license file
"sunpro.lic,node" is indeed having the demo
license Forte 6 Update 2.
It appears from these errors that this may not be
the case.
Hope this helps.
Thanks,
Gopinath. -
Do you know where Cisco MSE Demo ova-file is ?
Hello Expert,
I'm looking for Demo File for Cisco MSE.
I checked other thread about same subject.
According to thread, the demo file is able to get from site.
-> http://wnbu-press.cisco.com/blog/2013/03/16/cmx-demo-kit-on-a-usb-stick-guide/
But, Now cannot access its site.
Do you know where Cisco MSE Demo ova-file is ?
I'd appreciate it if you could answer my questions.
Best regards,
takuroHello,
If possilble yuou can download the virtual MSE and that has an eval license so you can use it for 60 days I believe.
http://software.cisco.com/download/release.html?mdfid=284294864&flowid=31242&softwareid=282487503&release=7.2.103.0&relind=AVAILABLE&rellifecycle=ED&reltype=latest
This may help you out. -
Hello.
We use two nodes of CUCM 7.1 and we have permanent device license. Now we'd like to increase amount of phones for a short time. I downloaded 3-monthes demo license for 500 units (the file in attachment). So my question is - how I should add this license correctly? Should I edit this file in some way before uplouding to a server? What will be with our permanent license? What will happen after 3 months? We just lose additional 500 units or it could affect the permanent license?
I would very thankful for any answers.
RuslanRuslan,
All licenses on CUCM are cumulative and they do not overwrite previous licenses. So, simply upload this licenses (assuming it is for the correct MAC) on the publisher. There is no limit as to how many licenses you can have AFAIK.
HTH,
Chris -
Demo license to permanent license
Hello All, again.
Is there documentation on how to go from demo to permanent?
I have my permanent license keys, files. I just feel that I should have support on the phone when I do this.
Just in case every thing doesnot come back online.
Also... should I delete the other package files and there folders first?
Like I'm thinking that I should clean up the system and only have what we really use, then apply the license.
Any doc to follow would be great.
Thanks
Mike.It is pretty straight forward in 5.3.1
using the Activities... Register License...then Click Load License Button to load the license file supplied to you
You should have been given a file (5.3.1 is file based, 6.x is a code)
After loading a license file, information about your license should be displayed in the dialog / grid
Make sure it matches what you own / using for that environment
Key items
Master License for Machine <-- make sure it matches
Expiration: No expiration or some date if that is expected
Clients: # of clients you expect to connect at one time
Options <-- Make sure you have all the options you should like Fault Tolerance, Transporter, etc
If you have a demo key that is valid for this week you could switch back if you ran into problems.
Adapters may have different procedures I believe there are adapter guides for each adapter (we only use the basics)
I think generically you just need to stop drop start the master services
Marc
Maybe you are looking for
-
LaserJet Pro CM1415fnw color MFP frequently calibrates
HI, i've owned a laserjet pro CM1415 now for a few years and it frequently calibrates, often every few minutes. the only way it stops is when i turn the printer off. It is now making weird noises when it calibrates. How can i fix this issue? thankyou
-
I hate the new flat Firefox icon; how do I change it back to the nice 3d one?
With the upgrade to Firefox 23, you've changed the Firefox icon to a new flat design. It's horrible; I hate it; it looks awful. I want to change it back to the old swish looking 3D style icon. How do I do this please? I'm on Windows 7 64bit.
-
Add Attriutes from BOL BTOpportH to Assignmentblock Opportunity
Hi experts, I have the following Problem. In the WebUI at BP View I have an Assignmentblock (Table) for BP related Opportunities (View: BP_BPBT/AccountOpportunities). The Context Node is a Table Node with Base Entity BuilOpportunity. We created Z-Fie
-
Relation between Proforma Invoice and Credit Note Number
Hi, Could you please tell me how i can link the proforma invoice number with credit note number. I have proroma invoice number. I want to find its corresponding credit note number. Kindly help. Regards Sachin
-
''locking as a duplicate - https://support.mozilla.com/en-US/questions/841566'' I wanted to respond to an ad on craigslist, and when I click on the email link, nothing happens.