UCCX 8.5 Record script not working

Hi,
I am attempting to create a script that allows a caller to leave a message or receive a callback if they are in the queue. I'm using the BaseLineAdvQueuing script from the script repository. It works fine except the part where the user either leaves a message for voicemail, or leaves a message for callback.
When they press a button to leave a callback, the default prompt says "please leave a message..." and then it beeps, but then rings and i get the "system is experiencing problems" error.
I isolate the script and narrow it down to the Recording prompt. I created a sample script that simply prompts the user to record, but i am receiving the same error.
My MIVR logs contain the following error:
CMTRecordingDialogImpl:: Can not initialize Audio Doc Impl; nested exception is:
java.io.FileNotFoundException: /opt/cisco/uccx/temp/[email protected] (Permission denied)
My test script is attached. Has anybody see error before?
thank You

Sounds like CSCud12937 - Temp folder for prompt recordings have incorrect permissions

Similar Messages

After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?

After updating to Firefox 5 my Realplayer Recorder is not working due to that add on not being compatible. How do I get this to work again?

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

Stereo video recording is not working after updating to ICS

hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.

As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

My video recording sounds not working but other sounds are working fine, I've tried clearing the little mic thing near my earphone hole and had no success can someone please help me out?

hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?

Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.

Sound Recorder is not working

My sound recorder is not working!
I already saw all of topics about sound recording problem in hp support forum but it did not slove yet.
Now what should i do?

Try running audio recorder troubleshooter fixit from below link and check if your issue is resolved
https://support.microsoft.com/en-us/mats/audiorecording

Monitoring and recording feature not working in UCCX

Hi,
The recording and monitoring option is not working in the new UCCX setup I have installed.I have configured following things for desktop monitoring as per the document
1)Checked that IP Phones are diasy chained and speakers of Supervisor's PC is working,NIC card of agent's and supervisor desktops are compatible
2)In web CDA P phones to be monitored have been configured
3)In CCM configured the phone for "Span to PC port" as enabled also configured "Advertise G.722 codec" as disabled
4)Ran postinstall.exe on agents system and checked if correct NIC adapter is being used for monitoring
5)Checked the NIC binding order in UCCX server and that is correct
I noticed one thing that "services" in both CAD and CSD are showing as "partial services" and they are monitoring and recording services only.Hence is this problem related to these services? How do i correct the recording and monitoring issue?
Regards
Amit

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I would first recycle the VOIP Monitoring Service on both node if this is HA. This will not affect calls or call processing.
In addition, you stated you ran post install on the clients desktop but have you ran post install on the server itself?
In the desktop Administrator, what server is selected to be the default VOIP Monitor server?
Jason M. Hutchinson

Script not working in SharePoint content editor webpart

Hi All,
<html>
<head>
<script type="text/javascript" src="https://www.google.com/jsapi"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function () {
//Call your function here like
//retrieveListItems();
ExecuteOrDelayUntilScriptLoaded(retrieveListItems, "SP.js");
var siteUrl = '/vceo/PMO/EPMO/';
var close1 = ''; var close2 = ''; var high = ''; var low = ''; var medium = ''; var lowMedium = ''; var mediumHigh = '';
var open1 = ''; var open2 = ''; var high1 = ''; var low1 = ''; var medium1 = ''; var lowMedium1 = ''; var mediumHigh1 = '';
var count = 0; var count1 = 0;
var initiate = 0; var planning = 0; var execution = 0; var closing = 0;
var sumMinimal = 0; var sumModerate = 0; var sumCritical = 0; var sumSevere = 0;
var sumHighlyLikely = 0; var sumLikely = 0; var sumSomewhat = 0; var sumUnlikely = 0;
var sumBudget = 0; var sumCommitted = 0; var sumConsumption = 0;
function retrieveListItems() {
alert("Welcome to Dashboard");
var clientContext = new SP.ClientContext(siteUrl); alert("site url");
var oList = clientContext.get_web().get_lists().getByTitle('Project Issues and Risks');
var oList1 = clientContext.get_web().get_lists().getByTitle('Project');
var oList2 = clientContext.get_web().get_lists().getByTitle('Risk Impact');
var oList3 = clientContext.get_web().get_lists().getByTitle('Risk Probability'); alert("get by title");
var camlQuery = new SP.CamlQuery(); var camlQuery1 = new SP.CamlQuery(); var camlQuery2 = new SP.CamlQuery(); var camlQuery3 = new SP.CamlQuery(); var camlQuery4 = new SP.CamlQuery(); var camlQuery5 = new SP.CamlQuery(); var camlQuery6 = new SP.CamlQuery();
camlQuery.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Project_x0020_Issue_x0020_Status" /><Value Type="Choice">Issue</Value></Eq></Where></Query></View>');
camlQuery1.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Project_x0020_Issue_x0020_Status" /><Value Type="Choice">Risk</Value></Eq></Where></Query></View>');
camlQuery2.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Overall_x0020_Status" /><Value Type="Choice">Open</Value></Eq></Where></Query></View>');
camlQuery3.set_viewXml('<View><Query><Where><Eq><FieldRef Name="Overall_x0020_Status" /><Value Type="Choice">Closed</Value></Eq></Where></Query></View>');
camlQuery4.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
camlQuery5.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
camlQuery6.set_viewXml('<View><Query><Where><IsNotNull><FieldRef Name="Project_x0020_Code" /></IsNotNull></Where></Query></View>');
this.collListItem = oList.getItems(camlQuery); this.collListItem1 = oList.getItems(camlQuery1); this.collListItem2 = oList1.getItems(camlQuery2); this.collListItem3 = oList1.getItems(camlQuery3);
this.collListItem4 = oList2.getItems(camlQuery4); this.collListItem5 = oList3.getItems(camlQuery5); this.collListItem6 = oList1.getItems(camlQuery6);
clientContext.load(collListItem); clientContext.load(collListItem1); clientContext.load(collListItem2); clientContext.load(collListItem3); clientContext.load(collListItem4); clientContext.load(collListItem5); clientContext.load(collListItem6);
clientContext.executeQueryAsync(Function.createDelegate(this, this.onQuerySucceeded), Function.createDelegate(this, this.onQueryFailed));
alert("retrieve list");
function onQuerySucceeded(sender, args) {
alert("succeed");
var listItemEnumerator = collListItem.getEnumerator(); var listItemEnumerator1 = collListItem1.getEnumerator(); var listItemEnumerator2 = collListItem2.getEnumerator();
var listItemEnumerator3 = collListItem3.getEnumerator(); var listItemEnumerator4 = collListItem4.getEnumerator(); var listItemEnumerator5 = collListItem5.getEnumerator(); var listItemEnumerator6 = collListItem6.getEnumerator();
var sumClose = 0; var sumClose1 = 0; var sumHigh = 0; var sumMedium = 0; var sumLow = 0; var sumLowMedium = 0; var sumMediumHigh = 0;
var sumOpen = 0; var sumOpen1 = 0; var sumHigh1 = 0; var sumMedium1 = 0; var sumLow1 = 0; var sumLowMedium1 = 0; var sumMediumHigh1 = 0;
while (listItemEnumerator.moveNext()) { var oListItem = listItemEnumerator.get_current(); sumClose += oListItem.get_item('Close'); sumOpen += oListItem.get_item('Open'); sumHigh += oListItem.get_item('High'); sumMedium += oListItem.get_item('Medium'); sumLow += oListItem.get_item('Low'); sumLowMedium += oListItem.get_item('LowMedium'); sumMediumHigh += oListItem.get_item('MediumHigh'); }
while (listItemEnumerator1.moveNext()) { var oListItem1 = listItemEnumerator1.get_current(); sumClose1 += oListItem1.get_item('Close'); sumOpen1 += oListItem1.get_item('Open'); sumHigh1 += oListItem1.get_item('High'); sumMedium1 += oListItem1.get_item('Medium'); sumLow1 += oListItem1.get_item('Low'); sumLowMedium1 += oListItem1.get_item('LowMedium'); sumMediumHigh1 += oListItem1.get_item('MediumHigh'); }
while (listItemEnumerator4.moveNext()) { var oListItem4 = listItemEnumerator4.get_current(); sumMinimal += oListItem4.get_item('Minimal'); sumModerate += oListItem4.get_item('Moderate'); sumSevere += oListItem4.get_item('Severe'); sumCritical += oListItem4.get_item('Critical'); }
while (listItemEnumerator5.moveNext()) { var oListItem5 = listItemEnumerator5.get_current(); sumUnlikely += oListItem5.get_item('Unlikely'); sumSomewhat += oListItem5.get_item('Somewhat'); sumLikely += oListItem5.get_item('Likely'); sumHighlyLikely += oListItem5.get_item('HighlyLikely'); }
while (listItemEnumerator6.moveNext()) { var oListItem6 = listItemEnumerator6.get_current(); sumBudget += oListItem6.get_item('Project_x0020_Budget_x0020_Amoun'); sumCommitted += oListItem6.get_item('Committed_x0020_Budget'); }
count = this.collListItem2.get_count();
count1 = this.collListItem3.get_count();
while (listItemEnumerator2.moveNext()) {
var oListItem2 = listItemEnumerator2.get_current();
var stat = oListItem2.get_item('Project_x0020_Status');
if (stat == "Intiation") {
initiate = initiate + 1
if (stat == "Planning") {
planning = planning + 1
if (stat == "Execution") {
execution = execution + 1
if (stat == "Closing") {
closing = closing + 1
//alert("initiate" + initiate); alert("planning" + planning); alert("execution" + execution); alert("closing" + closing);
//alert("countOpen" + count); alert("closed:" + count1);
window.close1 = sumClose; window.close2 = sumClose1; window.high = sumHigh; window.low = sumLow; window.medium = sumMedium; window.mediumHigh = sumMediumHigh; window.lowMedium = sumLowMedium;
window.open1 = sumOpen; window.open2 = sumOpen1; window.high1 = sumHigh1; window.low1 = sumLow1; window.medium1 = sumMedium1; window.mediumHigh1 = sumMediumHigh1; window.lowMedium1 = sumLowMedium1;
drawChart();
function onQueryFailed(sender, args) { alert('Request failed.. ' + args.get_message() + '\n' + args.get_stackTrace()); }
google.load("visualization", "1", { packages: ["corechart"] });
function drawChart() {
var data = google.visualization.arrayToDataTable([['Task', 'Issues'], ['Close', window.close1], ['Open', window.open1]]);
var data1 = google.visualization.arrayToDataTable([['Task', 'Risks'], ['Close', window.close2], ['Open', window.open2]]);
var data2 = google.visualization.arrayToDataTable([['Program', 'High', 'Medium-High', 'Medium', 'Low-Medium', 'Low'], ['Category', window.high, window.mediumHigh, window.medium, window.lowMedium, window.low]]);
var data3 = google.visualization.arrayToDataTable([['Program', 'High', 'Medium-High', 'Medium', 'Low-Medium', 'Low'], ['Category', window.high1, window.mediumHigh1, window.medium1, window.lowMedium1, window.low1]]);
var data4 = google.visualization.arrayToDataTable([['Project', 'Status'], ['Closed', count1], ['Open', count]]);
var data5 = google.visualization.arrayToDataTable([['Project', 'Status'], ['Initiation', initiate], ['Planning', planning], ['Execution', execution], ['Closing', closing]]);
var data6 = google.visualization.arrayToDataTable([['Program', 'Impact'], ['Minimal', sumMinimal], ['Moderate', sumModerate], ['Severe', sumSevere], ['Critical', sumCritical]]);
var data7 = google.visualization.arrayToDataTable([['Program', 'Probability'], ['Highly Likely/Probable(76%-100%)', sumHighlyLikely], ['Likely(51%-76%)', sumLikely], ['Somewhat Likely(26%-50%)', sumSomewhat], ['Unlikely/Improbable(0%-25%)', sumUnlikely]]);
var data8 = google.visualization.arrayToDataTable([['Project', 'Budget'], ['Approved', sumBudget], ['Committed', sumCommitted]]);
var options = { title: 'Program Issues', width: 200, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options1 = { title: 'Program Risks', width: 200, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options2 = { width: 200, height: 200, legend: { position: 'top', maxLines: 3 }, bar: { groupWidth: '25%' }, isStacked: true, vAxis: { title: 'Open', titleTextStyle: { color: 'red' } } };
var options3 = { width: 200, height: 200, legend: { position: 'top', maxLines: 3 }, bar: { groupWidth: '25%' }, isStacked: true, vAxis: { title: 'Open', titleTextStyle: { color: 'red' } } };
var options4 = { title: 'Project Status', width: 225, height: 300, legend: 'bottom', pieSliceText: 'value', pieStartAngle: 180, };
var options5 = { width: 175, height: 200, legend: { position: 'top', maxLines: 10 }, pieSliceText: 'value', };
var options6 = { title: 'Program Risk Impact', width: 300, height: 300, legend: 'right', pieSliceText: 'value', };
var options7 = { title: 'Program Risk Probable', width: 300, height: 300, legend: 'right', pieSliceText: 'value', };
var options8 = { title: 'Project Budget', width: 300, height: 300, legend: 'bottom', pieSliceText: 'value', };
var chart = new google.visualization.PieChart(document.getElementById('chart_div3'));
chart.draw(data, options);
var chart1 = new google.visualization.PieChart(document.getElementById('chart_div'));
chart1.draw(data1, options1);
var chart2 = new google.visualization.ColumnChart(document.getElementById('chart_div1'));
chart2.draw(data2, options2);
var chart3 = new google.visualization.ColumnChart(document.getElementById('chart_div2'));
chart3.draw(data3, options3);
var chart4 = new google.visualization.PieChart(document.getElementById('chart_div4'));
chart4.draw(data4, options4);
var chart5 = new google.visualization.PieChart(document.getElementById('chart_div5'));
chart5.draw(data5, options5);
var chart6 = new google.visualization.PieChart(document.getElementById('chart_div6'));
chart6.draw(data6, options6);
var chart7 = new google.visualization.PieChart(document.getElementById('chart_div7'));
chart7.draw(data7, options7);
var chart8 = new google.visualization.ColumnChart(document.getElementById('chart_div8'));
chart8.draw(data8, options8);
</script>
</head>
<body>
<table >
<tbody>
<tr>
<td id="chart_div8" colspan="2" style="border-bottom:ridge;border-left:ridge;border-top:ridge"></td>
<td id="chart_div4" style="border-bottom:ridge;border-left:ridge;border-top:ridge"></td>
<td id="chart_div5" style="border-bottom:ridge;border-right:ridge;border-top:ridge"></td>
</tr>
<tr>
<td id="chart_div" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div2" style="border-bottom:ridge;"></td>
<td id="chart_div3" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div1" style="border-bottom:ridge;border-right:ridge""></td>
</tr>
<tr>
<td id="chart_div6" colspan="2" style="border-bottom:ridge;border-left:ridge;"></td>
<td id="chart_div7" colspan="2" style="border-bottom:ridge;border-left:ridge;border-right:ridge"></td>
</tr>
</tbody>
</table>
</body>
</html>
This content editor webpart not working in sharepoint page. Once I checked out to the page then chart is working. When i checkedin function not get called. How to fix this?
THanks in advance!

In SharePoint 2013, sp.js and sp.runtime.js does not load on the page in published mode. You need to explicitly load these files. You can check using IE developer tools in the Script section that in published mode these files are missing.
In order to fix this issue explictly refer these two js files on your page.
<script type="text/javascript" src="_layouts/15/sp.runtime.js"></script>
<script type="text/javascript" src="_layouts/15/sp.js"></script>
Geetanjali Arora | My blogs |

Simple button script not working

I am using AS2 and need help figuring out why this simple button script is not working:
stop();
buttonWS1.onRelease = function(){
                    gotoAndStop("Stage1and2_Boss",4);
buttonWS2.onRelease = function(){
                    nextFrame();
//end
My buttons are the square letter-puzzles below. They are images that I converted to "symbols" (specifically, buttons). I put their names as above (buttonWS1, buttonWS2, etc.) in the "instance names" boxes.
I have no idea what is going on. Please help!

Hi -
1. Yes, buttonWS2 is the instance name
2. The only code attached to it is the code I pasted above.
3. onRelease does not execute because my trace statement does not appear in the output
Here is the modified code for buttonWS2:
buttonWS2.onRelease = function(){
                    trace("clicked!");
                    nextFrame();
Question: It shouldn't matter if I have commented-out code within that set of codes should it?:
buttonWS2.onRelease = function(){
          //if (puzzleschosenarray[0] == 2 || puzzleschosenarray[1] == 2) {
          // cannot be chosen -- make button non-functional
          //else{
                    //puzzleschosenarray[roundnumber-1] = 2;
                    trace("clicked!");
                    nextFrame();

Java script not working in 1 pdf, but same script is NOT working in other

Dear Experts,
I have a problem with java script.
I have created 2 PDFs with the same Form name and sub form names.
I have written a javascript and this script seems to be working in one (Demand2.pdf) and NOT working in the other (Sample.pdf).
The link for Demand2.pdf is
https://acrobat.com/#d=XIydWx1RIU4oNdTySHtHfg
and the link for sample.pdf is
https://acrobat.com/#d=sKPRs2dtDY57RSvMVtnh3w
Can you please guide me on this.
Many Thanks
BookFans

Hi,
The second file (Sample.pdf) is saved as Static. The script is changing the visual appearance of the form (showing and hiding objects). This requires the file to be saved as a Dynamic PDF. This is available in the save-as dialogue under the file name.
Good luck,
Niall

Logout Script not working in 10.9.3 Mavericks

Sorry for the duplicate post, but this issue is with MacBook Pro not iMac.
Can anyone tell me why this logoutscript will not work using LogouHook in Mavericks. The exact same script worked with Lion and Mountain Lion.
#!/bin/csh
## CCS-Checkout Logout Script
if ( $USER == 'ccs-checkout' ) then
#first, unlock all files
/usr/bin/chflags -R nouchg /Users/ccs-checkout/*
/usr/bin/chflags -R nouchg /Users/ccs-checkout/.Trash/
/usr/bin/chflags -R nouchg /Users/ccs-checkout/.??*
#then, delete all of the files
/bin/rm -R /Users/ccs-checkout
#copy a "clean" version of the ccs-checkout users home directory
/usr/bin/ditto -rsrcFork /var/skel/ccs-checkout /Users/ccs-checkout
#ensure that the users directory exists and set the privs
/usr/sbin/chown -R ccs-checkout:wheel /Users/ccs-checkout
/bin/chmod -R 775 /Users/ccs-checkout/
#make sure trash is empty
/bin/rm -R /Users/ccs-checkout/.Trash/
#make sure trash dir exists and set privs for trash and dot files
/bin/mkdir /Users/ccs-checkout/.Trash
/usr/sbin/chown -R ccs-checkout /Users/ccs-checkout/.??*
/bin/chmod -R 700 /Users/ccs-checkout/.??*
endif
exit 0
The script will run in terminal when copied and pasted from #first, unlock all of the files to exit 0.
When I run defaults write com.apple.loginwindow LogoutHook /usr/local/bin/LogoutScript the date on the com.apple.loginwindow.plist file changes so it is being modified.
Apparently there is something in:
#!/bin/csh
## CCS-Checkout Logout Script
if ( $USER == 'ccs-checkout' ) then
That Mavericks does not like or won't execute.
To duplicate this issue on your MBP make a user named ccs-checkout with normal permissions and autologon. After the first logon of the ccs-checkout user log out and log on as root and copy the ccs-checkout users local profile to the /var/skel/ folder. Then make the above script into an executable .sh file named LogoutScript and place it in the /usr/local/bin/ folder and run the above LogoutHook.
Thanks for any help with this issue.

This is the part of code where script fails. In 9.2 I haven't any kind of problems.
                    think(0.1);
               forms
               .tree(100,
                    "//forms:tree[(@name='ZVE_PREGLED_ZAVAROVANJE_0')]")
                    .expandNode(
                    "X");
                    think(0.1);
               forms
               .tree(101,
                    "//forms:tree[(@name='ZVE_PREGLED_ZAVAROVANJE_0')]")
                    .selectNode(
                    "XY");
                    think(0.1);
               forms
               .tree(102,
                    "//forms:tree[(@name='ZVE_PREGLED_ZAVAROVANJE_0')]")
                    .activateNode(
                    "XYZ");
                    think(0.1);
               forms
               .textField(103,
                    "//forms:textField[(@name='INFO_BLOCK_IZBRANA_ZAVAROVANJA_0')]")
                    .setFocus();
                    think(0.1);
               }

Record button not working in guitar lesson

Trying to record in garage band in the guitar lesson section and the record button is not working at all. Any ideas anyone? Thanks!

I'm having the same problem. I checked the settings and I'm set to use the internal mac for my acoustic guitar. As I looked into it further the lesson play along recording works for me on some guitar lessons and not on others. It seems to not work on Basic lessons 2-9 but works on Basic lesson 1 and all of the Rock Guitar and Blues Guitar lessons. Very weird. So I thought Basic lesson 1 came with my macbook when I bought it 2 years ago and I just downloaded the Rock and Blues lessons. But Basic lessons 2-9 I downloaded after I bought my macbook but back in 2013. Maybe the lessons 2-9 need to be updated. Unfortunately when I did download an updated lesson 9 it still does not let me record a play along.
Did you ever find a fix for the problem?

[js] CS Scripting not working with CS3

Hello,
We had a JavaScript made for us that enabled the user to exchange certain text within a document.
This script works fine with CS (Ver.3.0.1) but gives a JavaScript Error - #55, Error String: Object does not support the property or method 'findPreferences' with CS3 (Ver.5.0)
I have tried 'tinkering' around with the scripting - but I have zero experience with JavaScript and have not found a solution.
Additionally the people that wrote the initial script are not available.
I have bought several books but they all seem like alien-language to me
Below is the section of origional CS scripting.
Can anyone point out to me WHY this script does not work with CS3?
And WHERE I should start looking - changing?
Thanks in advance for your help and guidence.
Lee
// Exchange the text
function actProjectData(oneDoc, oneResult){
app.findPreferences = null; app.changePreferences = null;
oneDoc.search(undefined, true, true, oneResult[0],{appliedCharacterStyle:oneDoc.characterStyles.item(myProjectTitleCharStyleNa me)}, undefined);
oneDoc.search(undefined, true, true, oneResult[1],{appliedCharacterStyle:oneDoc.characterStyles.item(myOfferNoCharStyleName)}, undefined);
oneDoc.search(undefined, true, true, oneResult[2],{appliedCharacterStyle:oneDoc.characterStyles.item(myOfferDateCharStyleName) }, undefined);
app.findPreferences = null; app.changePreferences = null;

> Come to think of it, maybe it's easier to create a folder "Version 4.0 Scripts" under your scripts folder and place your CS script in there. Maybe that will do the trick. Should have thought of that earlier.
Tried this, but it didn't seem to do anything... But certainly a 'try' worth.
Currently playing around with the:
> app.findTextPreferences.findWhat = "a";
app.changeTextPreferences.changeTo = "b";
oneDoc.changeText();
I've got to the point where I have no error messages :-) Now I'm really flying.....
Fact is - not all text and also the wrong text is replaced!!!
I'm currently playing with the script to try and replace
all texts with a given paragraph style with the entered text...
Not proving to be simple for me, but I'm learning rather a lot!
Now that doesn't sound very clear when I go back and read it!
What I want to say is:
Each page of the document has the project name, No & Date on it (each having their own paragraph style)
so
With this script it asks you the Project name, No. and Date and then goes
through the whole document and replaces all instants of those texts with specific paragraph styles with the newly 'entered' text.
Proving to be a little mountain for me - Thought it would only be a hill!

[JS CS5] Re order pages script not working for me

Hi, I'm attempting to use the reorder script marked as the answer in this post :
http://forums.adobe.com/thread/519470
My problem is that when it reorders the pages, it puts them all into one spread and errors once it reaches 10.
Some details on what I am doing -
It's an 18 page document, reorder is as follows:
1,2,4,18,17,5,6,16,15,7,8,14,13,9,3,10,11,12
Currently it's in spreads, but even when I turn off facing pages, move each page by itself and turn the master into one page, I still have the same error. I've been fighting with this a while, I've tried each of those by themselves as well.
In case you are curious about the order - this is a booklet, but the middle signature is 3 pages. I'm attempting to create a script that will take it from reader to printer spreads as "print booklet" will not work because of the 3 page signature (extra page is a fold out on finished product).
I'm fairly new to scripting and feel it must be something obvious I'm just missing.
Thank you for your time!!

@Krista – I suggest you ask in the thread you are pointing to with your link.
No need to split the thread into two.
Now to your problem:
if all the pages end up in one spread it is no surprise that you get an error after page 10. The maximum page count of one single spread is 10.
Why do the pages go to one spread?
It's pure speculation, but I think it has to do with some preconditions your spreads are in.
Check for "Allow Document Pages to Shuffle" and "Allow Selected Spread to Shuffle".
Is "Allow Selected Spread to Shuffle" "off" or "on" for the particular spread where all pages are added?
And another question:
what is the particular script you refer to? There are a couple of scripts in this thread from various authors.
Uwe

Font missing CS4 script not working in CS5???

hi, my font missing script is working in CS3, and CS4 but not working in CS4.
I don't know why, any help please.
Sam

Object model has some changes in CS5.
So use the below code in top of your script.
app.scriptPreferences.version = 6.0;

VBA-script not working in InDesign

Goal: To have text placed from Word formatted in the paragraph styles I like. I receive the text from other authors and they are formatted with standard Word paragraph style formatting.
Two solutions:
Format the text in Word (change paragraph styles) using VBA, place/import it and somehow make sure that InDesign uses the styles I already defined in InDesign, not the way that style is defined in Word. I can't figure out how to do this.
Do the formatting in InDesign, using script. But the VBA-macro does not work in InDesign.
How may I change the code in order to work in InDesign? The code should look for specific paragraph styles and change them or the style of the next paragraph.
Sub stilSkifte()
Selection.GoTo What:=wdGoToPage, Which:=wdGoToNext, Name:="1"
Dim para As Paragraph
For Each para In ActiveDocument.Paragraphs 'søk gjennom hvert enkelt avsnitt i dokumentet
   On Error Resume Next
    'INGEN MELLOMROM og overskriftene
    If para.Range.Style = "Ingen mellomrom" Then
        para.Style = "Normal"
        GoTo SisteLinje 'Gå til linja i koden som heter SisteLinje, = gå til neste avsnitt
    End If
    If para.Range.Style = "Overskrift 1" Then
        para.Style = "Tittel-små"
        GoTo SisteLinje 'Gå til linja i koden som heter SisteLinje, = gå til neste avsnitt
    End If
    If para.Range.Style = "Overskrift 2" Then
        para.Style = "Ingress"
        GoTo SisteLinje 'Gå til linja i koden som heter SisteLinje, = gå til neste avsnitt
    End If
    If para.Range.Style = "Overskrift 3" Then
        para.Style = "mellomtittel"
        GoTo SisteLinje 'Gå til linja i koden som heter SisteLinje, = gå til neste avsnitt
    End If
    'NORMAL til BYLINE
    If para.Range.Style = "Ingress" Then
        If para.Next.Style = "Normal" Then
            para.Next.Style = "byline1"
        End If
           GoTo SisteLinje
    End If
    If para.Range.Style = "byline1" Then
        If para.Next.Style = "Normal" Then
            para.Next.Style = "byline2"
        End If
           GoTo SisteLinje
    End If
   'Hvis avsnittet er i NORMAL og det neste er...
    If para.Range.Style = "Normal" Then
        '...i NORMAL endres dette til NORMAL M INNRYKK
        If para.Next.Style = "Normal" Then
            para.Next.Style = "Normal med innrykk"
        End If
        GoTo SisteLinje
    End If
SisteLinje: Next
End Sub
I apriciate any suggestions!

Thank you Kasyan, but it doesn't work as I expected it to. The InDesign style are somtimes overridden, sometimes not. It seems to have something to do with wether the Word-style is based on another Word-style or not. In addition I have my InDesign styles grouped, and when InDesign upon placing a text doesn't find the style on the top level, it imports the Word-style.
My solution:
Change Word-styles so they are not based upon another style
Running the VBA-code in Word
Placing the text using "Use InDesign style definition" for paragraph and character styles conflicts.
Editing the imported InDesign styles so that they are based upon and equals the original InDesign style in the respective group

UCCX 8.5 Record script not working

Similar Messages

Maybe you are looking for