UCCX 8.5 replace system prompts with user prompts not working.

I am running UCCX System version: 8.5.1.11002-22 with the language en_US installed. I am trying to replace the system generated prompts for a telephone number to be the localized voice talent.
1. I have enabled the System > System Parameters > User Prompts override System Prompts  is set to enabled.
2. I created the following prompt directory /gen/number/ and /gen/telephone.
3. I uploaded prompts (recorded by UCCX) to both of these directories.
4. Very simple script, accept, get calling number, generate prompt, play prompt, terminate call, end.
5. The generated prompt is always using the default installed system prompts and not playing the user uploaded prompts.
Is a restart of the UCCX engine required for this change to take place?
Thanks
Danny

Hi troyputnam,
It's not necessary a restart. Which folder do you upload the prompt, en_US? If you upload the prompt at a different folder, you will need to specify for every prompt to not look at the default Prompt Folder.
Regards
Please rate all useful posts
Favor calificar todos las respuestas útiles.
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

Similar Messages

  • XI Integration Engine- You cannot log on to system BS_SAP_R_3 with user XIR

    I have given the correct user name and password while creating RFC destination and Port.
    And I see wrong user ID/password in ping status.
    Ping Status: You cannot log on to system BS_SAP_R_3 with user XIRWBUSER
    Last Retry Thu Jan 18 23:13:47 UTC 2007 .
    Can anybody guide me on this?
    Thanks
    Chiru

    Hi,
    I have correct user id/ password in RFC destination. I do not know why in Runtime work Bench it is showing the wrong userid/password.
    I forgot to give it at the first time and later I gave the user details.
    And in Runtime work bench this error is not going away.
    Any help on this?
    Thanks
    chiru

  • Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. Thanks.

    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work. Please help. I am getting lots of spelling errors as the MacBook laptop screen is too small. Thank you so much! .

    Contentmom6 wrote:
    Brand new Mac user help please! How do you connect a 17" monitor to the MacBook? I have the monitor plugged into the Mac, but the F8 that I am used to with PC does not work.
    Normally, you just connect the monitor to the MacBook using a VGA adaptor that you can buy from an Apple Store.  Now try System Preferences > Displays > Detect Displays.  You should now be able to select a display mode for the monitor.  If it still doesn't work, then I'd check that everything is properly connected.  I've had problems with colours disappearing due to a faulty connection in the VGA adaptor.
    Bob

  • Four digit numbering system starting with 0001 and not just 1.

    How can I re name and renumber  a file of photos and include a four digit numbering system starting with 0001 and not just 1. I need this so another computer program can keep the images in numerical order
    Now I number a wedding say... Smith_Jones 1 ect up to 659 but a program I use to create albumes scrambles all my photos becasue they say the numerical system has to have 4 digits so Number 1 is really 0001 thus staying in order.  I d ont see how to assign 3 zeros to the front of numbers --- so # 344 would be 0344  LR wants to keep it 344.

    In the Library rename use the following custom settings.

  • Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, send me ansver,please

    Hello, all of a sudden I fell down my system and completely erased all bookmarks. Your progress with restoration does not work, write me of bookmarks could not be loaded. Please advice on everything because I came and they seriously need it.

    Did your computer crash or did Firefox crash causing the loss of the bookmarks?
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    See also:
    *http://kb.mozillazine.org/Lost_bookmarks
    *http://kb.mozillazine.org/Firefox_crashes
    *https://support.mozilla.org/kb/Firefox+crashes

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • SLD connection user/password not working.

    Hello friends,
    I am new bee in SAP Netweaver.
    I installed SAP Netweaver for java.
    Now I want to connect it with BAPI from SAP.
    so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
    I also tried http://localhost:50000/sld but my user/password not working.
    1. What to do to see/get username/password for SLD?
    2. How to connect netweaver to access SAP ZBAPI?
    Regards,
    RH

    Hello friends,
    I am new bee in SAP Netweaver.
    I installed SAP Netweaver for java.
    Now I want to connect it with BAPI from SAP.
    so, some where i am sucked with SLD. I opened Visula Administrator and nothing there to connect.
    I also tried http://localhost:50000/sld but my user/password not working.
    1. What to do to see/get username/password for SLD?
    2. How to connect netweaver to access SAP ZBAPI?
    Regards,
    RH
    Hi Ronny.
    Where is your UME running? On the java engine, on an ABAP system or at a LDAP?
    What i want to say is that your user has to gain the rights to connect to the SLD. Easiest way is to give you admin rights - to do that you have to know where your userstore is running....
    I am not sure if this is correct http://localhost:50000/sld
    Normally it should look like http://my.sap.com/56600/sld where my.sap.com is a fqdn and 56600 is the port of the java engine. 66 ist the system number of the as java.
    ZBAPI? I do not really know but i think you have to use a jco to connect...
    regards,
    Martin

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • FIND with MATCH OFFSET not working

    Hi,
    I have a statement:
    FIND '/' IN <ls_data_package>-/bic/zbib_sysn MATCH OFFSET off2.
    this works in all the case except for when <ls_data_package>-/bic/zbib_sysn = SSULTANA-VMC/.
    (i.e. when /bic/zbib_sysn = USERID-VMC/, here SSULTANA is the user ID)
    *In this case off2 = .
    Value of sy-subrc is 0 after this statement is executed
    Can some one please point out what I am doing wrong.
    Thank you,
    CD
    Edited by: CSD . on Sep 26, 2008 9:53 PM

    >FIND with MATCH OFFSET not working  
    Most unlikely.  More likely is that it isn't doing what you think it should be doing.  Or you're using it incorrectly!
    I can't really follow what your problem is.  I assume you mean that you are getting off2 with value 0, when /bic/zbib_sysn contains USERID-VMC/
    Can you be a little clearer in what the issue is?
    DATA: off2 TYPE i.
    FIND '/' IN 'this string /' MATCH OFFSET off2.
    WRITE: / sy-subrc, off2.
    This little program returns 0 and 12 
    matt

  • How can i navigate system preferences if trackpad is not working  somehow the option were unchecked

    How can i navigate system preferences if trackpad is not working? 
    Somehow the first couple of trackpad functions were unchecked and since they are not operational I can't click or tap to turn them back on.
    I've tried shutting down and restarting and holding my hand on the trackpad for 3-4 sec. then sliding it off (another post had this suggestions).
    I don't use the function keys at all to navigate the computer so I am at a total loss if the trackpad does not work.

    Thanks for the response.
    Unfortunately this did not work - the tap to click is still not checked - and the tap function does not work.
    I did try it twice - and even used a stopwatch to be sure I got the time right.
    I noticed there is also an instruction to reset PRAM (was with the SMC reset instructions).  Is that something that may help?

  • System sleep and shut down not working after upgrade to windows 10

    HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone  suggest, what to do ?

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature.  Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them.   1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try.  1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook.  Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter.   I hope this helps!  Have a great day!

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Serial number provided with download does not work, now what?

    serial number provided with download does not work, now what?

    Chrish29593217 you are welcome to contact our directly at Contact Customer Care.  What Adobe software title are you facing difficulties with?

  • TS3297 i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    i bot a 3g iphone 2nd hand and it is trobleing a lot with os and not working plese help me

    The following guide gives information on how to sync ringtones from your computer to the phone. The reference section at the bottom of the quide also gives instructions on how to convert a song to a ringtone. https://discussions.apple.com/docs/DOC-3792

  • [svn] 4323: Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working .

    Revision: 4323
    Author: [email protected]
    Date: 2008-12-15 19:23:10 -0800 (Mon, 15 Dec 2008)
    Log Message:
    Bug: LCDS-544 - Scenario where two components have seperate channel sets with overlapping channels not working.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * Hunting to a new channel within a channelset never triggered a disconnect from the previous channel(s). This isn't a problem in general, but does becomes a problem when an app defines two distinct channelsets containing at least one shared channel at the head of the list. In this case, the first channelset hunts past it and connects on a later channel. But when the second channelset hunts through (triggering a connect fault when it hits that initial shared channel that can't connect), the fault is processed by the first channelset as well (incorrectly).
    Ticket Links:
    http://bugs.adobe.com/jira/browse/LCDS-544
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as

    Running the script by python2 solves it for me:
    su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
    Best regards,
    Cedric

Maybe you are looking for