UCCX 8 - CSD Real Time Display "N/A"

Hello,
We are facing an issue with Cisco Supervisor Desktop real time display "Agent Logs - call" and "Agent Logs - state". These two real time displays show "n/a" while select specific agents (some agents it show data as normal). For the agents who display "n/a" in CSD, in CAD the real time data display as normal.
For example: When supervisor monitor Agent_A in CSD "Agent Logs - call" show "N/A" (the same to Agent Logs -state). But in CAD, Agent_A can see real time display "Agent Call Log Display" as normal (the same to "Agent ACD State Log Display").
Does anyone experience this issue?
It seem that the real time display data in CAD and CSD are getting from the same source. How come the CSD show "n/a" when the data is available in CAD? Any idea, please help.
Many thanks,

Hi Anuj,
Thanks for your response. We are currently running on UCCX SU2. We used to reinstalled CSD/CAD already after we upgrade the UCCX to SU2. Our issue is now fixed by delete the user id of inactive agent from resource page and resync the directory services.
Just a note for anyone who might face similar issue, the recommendation is to first check the version of CAD/CSD running on the client PC (as Anuj suggest) and also comparing the user ID with the UCCX resource page. Be aware that user ID is case sensitive. Check the inactive agent list in the resource page. Delete the user id if you see it there. Then go to Desktop Administrator to resync the directory servcies.
Thanks!

Similar Messages

Agent Real Time Displays 1 hour ahead

Greetings all,
Agent Real time display are showing 1 ahead hour of clock system.
Anyone have a suggestion if this is a bug or configuration issue ??
I have attached a screenshot to simplify
UCCX: 7.0

Hello Leonardo,
Could you please check if the time display by the Real Time Reports is the same time of the server??
Also I would like to know if the server and the agents are configure to use the same time zone??

Agent real time display not ready time is inaccurate

Agent Not Ready Detail in Webview-Agent Realtime Reports in CAD.
I am looking at the agent: Agent Not Ready Detail Report in Webview and comparing this to the Agent Real Rime Display in CAD. If I manually add the Not Ready times (state durations) from the agent ACD state log, they equate to the Cisco Web View agent report. However, the Total Not Ready column from the Agent Detail Display report in CAD does not sync up with either Webview or CAD. Its more than an hour off.
The Eastern managers are looking closely at these numbers now and one of the agents questioned the report in CAD today and brought this to a manager's attention. It is more than an hour off which is a big difference.
It was comparing the state duration for not ready from the ACD State Log Display (for example the 5 seconds at 10:15:04 in screen shot 1) to the total not ready time from the Agent Real Time Display Displays report (3:48:59 in screen shot 2). The total individual state durations of unavailable time from report #1 does not equal report #2 and I would think it should. If not explain why?
From CAD client > Real Time Displays > Agent ACD State Log Display. If you add up all the Not Ready times and compare with webview, it matches. No problem here.
From CAD client > Real Time Displays > Agent Detail Display (this doesnt match up with webview report or the total Not Ready times in Agent ACD State Log Display).
We're looking to know either
1. How exactly the not ready state time is calculated
OR
2. Where to find the information on how this is deteremined.
I appreaciate any response. Thank you.

Is it all agents or only one/some?
What does CSD show? Can you post a screenshot of the CSD main screen for a team?
Also, please post the traces from Desktop Recording and Statistics Server.

How to reset numbers in real time display in Cisco Supervisor Desktop?

Hi all,
I wonder about numbers in real time display in Cisco Supervisor Desktop. There are many statistic number for example : Call Handled, Max Talking, Avg Talking, Max Ready, Total Ready, Call abandoned, etc. Is there any way to reset those numbers back to zero? Please let me know.
Thank you.

Joe,
I haven't tried that, but I'm very skeptical. The CAD Agent gets stats from two places - CTIOS and RASS. RASS keeps the call log information in a SQL Desktop Engine database.
Stats derived from CTIOS reset at midnight. Obviously, restarting the RASS service has no effect on those. Call log information is being kept in a database so it seems to me that a restart of RASS should also have no effect.
I guess I will have to try for myself.
Regards,
Geoff

CAD agent detail real-time display

UCCE with CAD:
When agents show their statistics in the CAD window, and select Agent Detail Real-Time Display - the Avg Talking field is showing the same number for ALL agents. For example, each agent shows a value of 2:26 for Avg Talking. It would seem to me that this field should be specific to each individual agent, and not an average of all agents in the skill group. The Cisco CAD User Manual shows Avg Talking to be "The total time on calls (all talk time + all hold time) divided by the number of calls"
The other fields, i.e. calls presented, calls handled, etc, are specific to the individual agent and show different values as I would expect.
Am I mis-reading the documentation (which is entirely possible)? Has anyone else seen this?
Thanks,
Robb

Hi Robb,
Found my old TAC Case. It was for an upgrade from 7.2.5 to 7.5.6 so you might be hitting a similar issue. This is the email of the escalation from Cisco to Calabrio for the issue I had if it helps when you talk to TAC:
Problem Description:
Detailed Description
Upgraded ICM from 7.2.5 to 7.5.8 (CAD 7.5.6), after upgrade, CAD realtime
display report "Agent ACD State Log Display" start time shows a start time of 00:00:03
against every state change
Business Impact
medium:Could not see the Agent login time correctly
Troubleshooting Performed
Similar case:
http://wwwin-tools.cisco.com/casekwery/getServiceRequest.do?id=613948701#not
e48
However, the fix is
actually to go into the LDAP utility and do a hack to a certain key
within the database. Unfortunately the previous case doesn't tell which
key to edit and what to change it to. I'm presuming it had something to
do with the time zone from a mention earlier on within that case, but
not sure.
No bugs found related to the issue.
Specific Assistance Required
Need assistance to fix the issue with ACD State Log Display
Cheers,
Nathan

HELP: UCCX 7.0(1)SR05 CSD Queue Stat Display

CSD doesn't display the overall queue stats. Agent status/state okay, just no overall CSQ stats display in the Real Time Displays.

Thanks for the quick response. I checked and there's no other options. I saw a screen-print on what is should look like, but there's no options under "Skill Groups". Granted we're not using skills, just a resource group ... but from what I understand that's where it should show the name of the CSQ, but ours is empty.

UCCX 10.5 Real Time Report shows "Not Connected"

Hi,
UCCX 10.5 HA over LAN.
As per the title, RTR shows Not connected for both nodes and no data shown for all reports. all services are In service in both nodes.
Any Ideas?
Regards.

Hi Mohamed,
Are you accessing this via the IE or FF? If so which version?
The Real time reporting on UCCX connects to the RMI port 6999 to pull the information on the Engine. If there are no port blockages or if there are no issues with the browsers, then it is a problem with the configuration files in root holding this information which needs in depth analysis.
A restart of the Engine also should help. I know that everything is IN SERVICE, but I have noticed a lot of issues on UCCX 10.5 when there are stuck calls on the system, it impacts RTR with the midnight stats reset.
The reset of the Engine is bound to clear all the stuck calls in the system and this may be a side effect of the stuck calls on the system especially if the RTR was working before you noticed the problems.
Regards,
Arundeep

How can I display a .csv file as a real time waveform using labview

Hi folks.
As stated, Im looking to display a .CSV file (obtained via RS-232, example; 100,101,102,102,102,103...) as a waveform in real-time. What is the best way to approach this? Im thinking LabVIEW. I have version 7.1 but am not really experienced in using it. I'll give anything a go though. Also, I have Visual Studio 2005, so I was thinking VB???
Thanks in advance!
Simon.
Message Edited by simonious on 10-26-2007 04:13 AM

Have a look at this VI.
Add a convert string to number function behind it.
André
Message Edited by andre.buurman@carya on 10-26-2007 01:08 PM
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)
Attachments:
convert csvars 2 array of vars.vi ‏16 KB

How to count occurences of a certain string in incoming real-time data? Also displaying RTC data. Current VI included

I use LabView student Express 7 on a Windows XP system.
Time-frame: we are doing final integrations for our balloon experiment today. We just got told that the press wants to view real-time data, which we haven't programmed for. I need help to get a working VI at the latest by 25.02.2004 before 0800(morning) (GMT+1).
Note on license
It is a student balloon flight, and the data will not be used in scientific work, so the I am not breaking any license agreements (I hope).
Problem synopsis:
The balloon continually transmits data at 9600baud. The data is a semi-repeating header followed by a constant lenght data-package arranged like this:
BEXUS[h][m][s]BEXUS[h][m][s]
[Raw binary data, 7channels*8sub-channels*8bits]
What the groundstation is doing right now:
Take all incomming data and save (append) the data to a file without any data-handling. (We figured we would go post-processing).
What I need to change in less than 24 hours:
- Add a "package" counter
- Add a display of the clock data (RTC)
How I planned to implement the changes:
-RTC display:
The RTC data is in BCD format, since that means that if you look at the data as hex numbers, you get the hours and minutes and seconds out in "clear text". That is 12 hours is 0x12hex. I figured that I can do a match pattern BEXUS and pass the "after substring" to another match pattern BEXUS from which I feed the "before substring" to a type-cast VI (casting string to u8) and displaying that, which should give me a display of "123000" for the time 12:30:00... I couldn't get it to work at all when I tried out the supplied "beta" vi.
- Package counter:
Counting how many BEXUS that gets detected and dividing by 2. I don't know how to do this. I've looked on the forum (a good thread on the problem: "how do I count the number of *'s in a string") but these use either loops or arrays... and I'm not sure how this works when I'm getting the data in at realtime. I cant make an array and then count it, since then the array would grow fast and possibly interfere with saving of the data??? Saving the data is critical.. without that file we cant do post-processing.
Since my time is so limited (I'm not even supposed to do the groundstation software but they called on me in the last minute because no-one else had time/wanted too/could do it) I hope that you could make an exception and provide me with working VI's (based on the one I have attached) so that I can show something to the press! (Free comercial for NI!! Since the student version shows the National Instruments water-mark on all VI's!!! Possible TV time!!)
Thanks!
PS: even if you are to late (after 25) post anyway!
Why:
-I can learn from it
-the launch might be delayed due to weather conditions
-others might find it amusing!
Thanks again!
Attachments:
BexusII_groundstation.vi ‏46 KB

I have a valid example data file attached to this thread.
If you open BEXTEST.bin in a hex-editor of your choice, you'll see the BEXUS as 42 45 58 55 53 and then the time as 00 28 09 etc.
I couldn't get Joe Guo's VI to work. It doesn't count packages correctly, and the time is not displayed correctly either.
The file was saved using a straight save to file VI.
The data is from actual launching area tests performed a few mintues ago. The time displayed is "On time" e.g. how long the gondola has been powered up.
I have a spare T-junction, so I can hook into the balloon real-time data as we fly, in case anyone care to see if they can figure out why the latest version of Joe Guo's program is not displaying correctly.
I will monitor this
thread during and after flight to see if anyone can make it in time!
Thanks for the great effort!!
Attachments:
bextest.bin ‏53 KB

How to display on the graph three or more waveforms where time scale is not an index of array but a real time

How to display on the graph three or more waveforms where time scale is not an index of array but a real time:
I measure three voltages Va, Vb, and Vc on my Test stands every 3sec. So I’m building four arrays (Va, Vb, Vc, Time) and combine all in one.
Time
Va
Vb
Vc
0
5
3.5
2.8
3
4.9
3.6
2.9
6
4.8
3.8
2.1
Now I need to show on the graph in which scale X is “Voltage” and scale Y is “Time”.
How can I do it?
Thanks a lot,
Boris

Hi, thanks all your reply.
You may find "points_to_bar_graph.vi" from this website, I find it by this way.
I will ask a stupid question: I don't have any photo processing software, how can I save the vi into a picture format?
So here I just paste it into word document.
Attachments:
question.doc ‏520 KB
points_to_bar_graph.vi ‏62 KB

How to display string message real time in a string area?

I want to display string message on String indicator in screen real time, message is updating realtime when test application runing, i want to see the newest message display on screen real time instead of by drag down the vertical scroll bar manually.
please give me an idea how to set the attribute of string indicator?thanks

You can use Text.ScrollPosition property node for autoscrolling.
Andrey.

UCCX 9.0 real-time reporting

Hi,
I need information about UCCX 9.0 real-time reporting. What are the real time reports available on UCCX 9.0.
How to run this real time reports.
Regards,
Dinesh Joshi

Hi Dinesh
It's similar stuff to what you get in the Historical Reports - e.g. number of contacts, abandons, available agents, state of agents etc etc but counted up for that day and shown in real time. They're very basic looking tabular data type report generally, Supervisor can do some basic charts but nothing exciting and they aren't designed to be exporable.
Is there something specific you are looking for?

Popup Display in Real Time Warning

Hi,
I am using SAP ME 5.2.4.7.
I am configuring Real Time Warning. I configured the following settings.
1) In the event maintenance, I used the event type as RTW_CONSEC_NC and event activity as CONSEC_NC_HOLD_REL. (I used all the default settings of CONSEC_NC_HOLD_REL).
2) In the Pod Maintenance, for * POD, I set the Real Time Event Display as Popup.
3) In Real Time Warning Maintenance, I added top level material, operation and resource where I want real time warning and in the Consecutive Identical NC panel, I added NC Count level as NC Code, Non Conformance as Failure code (F01), Event Type as RTW_CONSEC_NC and Count as 1.
If I do Non Conformance for more than two times for an SFC, there is neither popup message nor the resource setup is changed into Hold Consec NC. But when I set the Real Time Event Display as Window, I am getting a display saying the operation is not available for use in the POD itself.
Kindly let me know whether I need to do any other configurations to get a Popup display?
Thanks,
Joe

Do you have indicators on your front panel that display a value from a software counter?
How are you updating or refreshing the displays? If you have indicators in a while loop then the indicators will be updated with each iteration of the loop.
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

How to display images real-time?

How, (using CVI, NI-IMAQ and IMAQ Vision) can I duplicate the Grab function seen in MAX; in other words, I want to display images at the frame rate of my camera (30 fps). I've come across several examples on this site, the best of which seemed to be "Performing Real-time Image Acquisition, Averaging, and Logging" (realtime_image_averaging.zip), but this example, built with LabView, can't find several vi's (IMAQ WindDraw.vi, IMAQ Convert.vi, IMAQ Add.vi, IMAQ Divide.
vi, IMAQ WriteFile.vi) needed to run it. I have LabView 5.1, NI_IMAQ 2.6 and IMAQ Vision for LabView 4.01). Please note that, although I'll accept LabView, I prefer a CVI solution.
Thanks in advance for any help.
'til next we type...
Jesse

I would strongly recommend upgrading to the current version of Vision. There have been major improvements since the version you have. I suspect the examples have improved significantly also, which would probably be worth the cost of the upgrade. I have attached a simple grab and display example in LabVIEW that I saved to LV 5, but I can't be sure it will work with the old version of Vision. Since you want to use CVI, it probably won't do you much good anyway.
Bruce
Bruce Ammons
Ammons Engineering
Attachments:
HL_Grab_in_IMAQ_Vision_display.vi ‏36 KB

Real Time report statistics report - UCCX IPPA

Hello All,
Real Time report statistics on IPPA agent phones refershing after 3 - 4 mits, Please hlep to resolve this issue.
Thanks,
Murali.P

I'm not sure I understand you, on the CTI topic. CTI is a fundemental protocol when it comes to CUCM/UCCX, which is the future of telphony. No old school PBX's here, just packets.
I was just looking at the UCCX 9.0(2) REST API and it looks like there are some stats to be farmed there, however, it's so new, I cannot really speaek to it from experience.
Check it out:
http://developer.cisco.com/documents/11218258/11219470/Cisco-uccx-developer-guide-902.pdf?redirect=http%3A%2F%2Fdeveloper.cisco.com%2Fweb%2Fuccxapi%2Fhome%3Fp_p_id%3Ddoc_library_summary_portlet_WAR_doclibrarysummaryportlet_INSTANCE_b8N60ctZVvHc%26p_p_lifecycle%3D0%26p_p_state%3Dnormal%26p_p_mode%3Dview%26p_p_col_id%3Dcolumn-5%26p_p_col_pos%3D1%26p_p_col_count%3D2
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

UCCX 8 - CSD Real Time Display "N/A"

Similar Messages

Maybe you are looking for