UCCX 9 editor won't install on non default drive (and run)

I have a large secondary drive on my workstation that I install programs on. Have put the various CCX editors over there with no problems in the past.
OS is W7 64 bit.
When installing CCX editor 9.0.2, it installs, but will not start. Finally figured out that unless I install it on "C:", it won't run.
Anyone else seen this, know how to make it work?
Cliff

Your external drive must be re-partitioned using the GUID partition scheme in order to install a bootable system on it. Be sure to use the Disk Utility that came with your Intel Mac. Select the hard drive from the left side list, click on the Partition tab in the DU main window. Select the partition numbers, then click on the Option button. Select the GUID partition scheme and click OK. Now click on the Partition button. After the volume mounts on the Desktop select it in the DU left side list, click on the Erase tab in the DU main window. Click on the Options button and select the option to Zero Data (one pass) and click OK. Now click on the Erase button. The format process could take from 30 minutes to several hours depending upon the size of the drive.

Similar Messages

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

never mind i got it by going into my account and veiwing hidden items and there it was

How do I install on a slave drive and not C drive

How do I install on a slave drive and not C drive

Install what? You can choose an alternate install location during setup or in the Creative Cloud app, but some components will always be installed on your system root drive, regardless.
Mylenium

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

Installing a new hard drive and want to re-install Photoshop

I need to install a new hard drive and want to re-install Photoshop. Since I will installing a new OS, when I deactivate Photoshop from the old hard drive, should I permanently deactivate or suspend activation?

Help > Deactivate

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi. My iMac hard drive is running Mavericks. I have an old version of Quark Xpress (3.32) which won't run in Mavericks. Can I partition my hard drive and run an older system on one partition, so I can access my Quark? Is that possible?

Hi ancelau,
QuarkXPress 3 is a Classic Mac OS application, so you need a version of OS X that still supports Classic. I believe 10.4 was the last one.
So if you have an iMac that boots with 10.4, then yes that is possible. I doubt though that newer Macs boot with OS X 10.4.
So why don't you upgrade QuarkXPress 3 to a newer version? I am not just asking that because I want you to spend money with us.
Typically using software that was released almost 20 years ago is just feasible when you keep an environment that was current at the time of release or a few years after, so an older Mac with a operating system present at that time. 20 years in IT is a lot.
So my opinion is that on a new Mac with a brand new operating system you need to use something a bit more current.
How about QuarkXPress 9 (released 3 years ago) or QuarkXPress 10? You are better off with v9, as QuarkXPress 10 only opens v7 and higher (whereas QuarkXPress 9 opens v3.1 and higher).
Or - I am even happy to make an exception - upgrade to 9 and we give you 10 for free? Let me know please.
Thanks
Matthias

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

I had Itunes installed on 2nd hard drive and it crashed

I had ITunes installed on 2nd hard drive and it crashed. I tried to install a new copy of ITunes and it keeps looking for the ITunes that was on the one that crashed. How do I keep ITunes install package from looking for the old install.

No reason to. I always a cloned copy of my operating systems so I can reclone it back in case the the one I use dies.

I recently installed a new hard drive and don't know how to install the software.

I recently installed a new hard drive and now when I turn it on, it just shows a blinking file with a question mark on it. What do I do now? How do I install the software if I can't get on the internet from my MacBook? Can the apple store do it for me?

Which operating system version did you have?
We also need to know which exact model Mac (almost always include this information when you post - saying MaBookPro is almost as bad as saying "Ford car" in terms of the variety of submodels) because some newer models can boot from the Internet.
OS X: About OS X Recovery - http://support.apple.com/kb/HT4718 - "OS X Lion, Mountain Lion, and Mavericks include OS X Recovery. This feature includes all of the tools you need to reinstall OS X, repair your disk, and even restore from a Time Machine backup without the need for optical discs."

I uninstalled firefox a few weeks ago and now want to reinstall it. When I install it it downloads fine and runs, it extracts up to 100% then othing happends so it doesn't install.

I uninstalled firefox a few weeks ago and now want to reinstall it. When I install it it downloads fine and runs, it extracts up to 100% then othing happends so it doesn't install.

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading and installing work.

Elements eleven editor won't install again. Help

After accidentally deleting my elements eleven editor it won't reinstall again. Despite me having the disc, serial number and the fact organiser is still working.
My mac pro says it 'installation encountered errors'. But it only says that right after the whole installation process and serial number input. So far I have tried reinstalling it multiple times, verifying the disc with disc utility and there seems to be no problem there. But it won't work anymore. So frustrating this is, I have wasted my weekend trying to resolve this, can anyone help?

The issue is, unfortunately, more likely with your Mac than with the program (assuming that the disc itself isn't damaged). Have you tried just downloading the program from Adobe's site (assuming it's version 13)?
Otherwise, you may want to open your Mac's Disk Utility and run some diagnostics on your system to ensure something on your Mac is not failing.

Adobe Reader 11.0 won't install through firefox - click save and then nothing else happens

Adobe Reader 11.0 won't install through firefox - I click save file when requested it switches to Step 2 of 3 but nothing is there and I have waited for a very long time for it to load. Anyone else have this problem?

Hi Pat,
After your last email I decided to continue to trouble shoot the problem and finally found the answer from another user. Oddly enough when using Firefox it will default to a location on your computer to save downloads. If it encounters a problem it doesn't identify it, the program just "loops" back to the start of the download sequence. Once I changed the folder that the downloads are sent to the original way of upgrading occurred without fault.
I will go back into the discussion group and credit you with the answer because I really appreciate your assistance.
Thank you, Jim
[private data removed]

Centro desktop won't install over earlier palm desktop and can't un-install old version

The Centro CD won't install the Centro Access Palm desktop
desktop - it stops and says I must de-install existing Palm desktop as it won't upgrade the earlier version.
Trouble is, I can't de-install Sony palm desktop. It is in c:\program
files but doesn't appear in control panel / add remove prgrams; didn't
allow revo to de-install it.
I tried just plugging in the Centro but windows could find usb drivers
(presumably)
So i'm a bit stuck. HELP!
Post relates to: Centro (Unlocked GSM)
This question was solved.
View Solution.

That was the next step.
I just needed to know what the OS of the PC was and the version of Palm desktop so I could tell you where to look for the correct folders.
Here is some more info. for you.
Click on the following link for the support page for your device on the kb.palm.com webpage.
http://www.palm.com/us/support/centro/centro_gsm/
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Post relates to: Palm i705

Adobe Acrobat XI won't install on the specified drive

I have Creative Cloud settings set to install all application on drive D: because C: drive is low on space. I have Muse and Photoshop already installed on drive D: but when I try to install Acorbat XI it tries to install it on C: and i get an "insufficient disk space" error.
Why do all the other application install on D: as specified in the settings, but Acrobat keeps trying to install on C:?
How can i fix this?

Moving this discussion to the Acrobat Installation & Update Issues forum.
Urshah it is likely that Acrobat is not recognizing the custom install location due to the utilization of different installation technology than the majority of Adobe Creative software titles included in a Creative Cloud Membership.
I would recommend uninstalling Acrobat utilizing the process listed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
You can then download a copy of Acrobat 11 Professional from Download Acrobat products | Standard, Pro | XI, X. You can select a custom install location and install Acrobat in trial mode. Once installed please choose the option to License this Software and enter the Adobe ID tied to your membership. You can find additional details at Convert Creative Suite 6 applications to Creative Cloud membership.

UCCX 9 editor won't install on non default drive (and run)

Similar Messages

Maybe you are looking for