UCCX Advanced Quality Management with VMware View

Hi,
I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
There are a few issues that I would need to consider specific to their environment.
The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
Thanks!

Hi James
I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN  you should be OK.
This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM  - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
Can't help re: VMware view either I'm afraid... 
Aaron

Similar Messages

  • Ipad connecting with vmware view client v5.1. "any way to disable or hide radial virtual keyboard mouse interface as using blue tooth external keyboard"

    Issue - ipad connecting with vmware view client v5.1. "any way to disable or hide the vmware view's radial virtual keyboard mouse interface" either in vmware view client settings, hidden cmds, or ipad system settings.
    My client is using an external blue tooth ipad metal cover type keyboard and does not wish to have the radial keyboard / mouse visable or floating on desktop when connecting to vm with iPad using vmware view client v5.1.
    i was unable to locate any settings or related toggle key/function combo keystrokes under iPad settings under vmware view client, to affect viewability of the radial keyboard/mouse. And can you kill it from service/process on vm instead of ipad? then dont allow service to restart at startup? What is the name of services that enable the radial virtual keyboard mouse - function to work?
    Thanks for any and all feedback-
    stratman1

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • File manager with tree view in main pane?

    I'm looking for a file manager with something similar to Nautilus' list view, with a list and tree structure as a main view.
    The nautilus one is awesome, but nautilus has qwerks if you don't use gnome (wants to control desktop, panels are very restricted, etc.)
    Does anyone know of a file manager with a view similar to this that I can try out?

    I've seen a few things on spacefm, and played with it a bit. Took me 3 minutes and 2 segmentation faults to find the setting to change views, and it still doesn't have the ability I want, so still a bit too buggy for me.
    Pcmanfm is a good all around filemanager, but doesn't have that feature either.
    I played with a slew of file managers one day looking for similar things, maybe I should try that again and branch out further than what's in the repos.
    More suggestions?

  • Configure & integrate the quality management with production planning

    hi,
      i know general flow of production planning ,
    i dono how to configure & integrate the quality management with production planning . can anyone explain step by step to configure.
    with regards,
    Elanchi

    Hi,
    You must define an inspection type 03 and activate it for materail. When you create production order you will have the inspection lot created. you define type of inspection plan in inspection lot type. You will insert an operation in routing og the material. This operation must contain inspection characteristics. use the operation key QM04 with a quality work center.
    Inspection process time will be assigned to your production order.
    I think you can manage t customise the process from this global definition of the QM process in Production.
    Best Regards,
    Salih Arslan
    SCM Functional Consultant
    Zeitine Solution Partners

  • Quality Management with SAP

    Hi Experts,
    Can anyone give me Xerox of this book :- Quality Management with SAP (by M. Holzer (Author), M. Schramm (Author)
    thanks
    Utkarsh

    You can directly download from
    [http://www.sap-press.com/product.cfm?account=&product=H1902]
    OR
    [http://www.amazon.com/Quality-Management-SAP-M-Holzer/dp/1592290515]
    Regards,
    Shyamal

  • CAD send metadata to Quality Management with chinese string

    Hi everybody,
           I'm facing a problem is when I want send a metadata to the Quality Management for a recording, it's failed when the metadata include Chinese string,  the error reason is "Tried to read incomplete UTF8 decoded String". And I believe the database of QM is support for Chinese string because I can change the metadata field in the database to Chinese string manually.
           Does anybody know how to send Chinese string to the Quality Management?
           The attachment is screenshot for the error and the result when I change database field into Chinese manually.
           It's really need somebody can help me to resolve this problem.
    Best Regards.
    Tony.Ye

    Hi James
    I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
    The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
    If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN  you should be OK.
    This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
    I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM  - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
    Can't help re: VMware view either I'm afraid... 
    Aaron

  • Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

    Hi All,
    We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
    The documentation I've been able to find describes three different recording methods:
    Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
    Server Recording - Uses SPAN (not so good for remote sites)
    Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
    Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported.  Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
    'Server Recording and Network Recording have the following limitations:
    • Extension mobility is not supported.'
    Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
    So the question I have is:  Is extension mobility supported in any way on version 8.0, or version 8.5 for recording?  And if so which recording method(s) are supported?
    Thanks,
    Jonathan

    Hi,
    I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless.  The answer I got was:
    "QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
    Regards,
    Jonathan

  • File Manager with tree view

    I've been using Cinnamon with the Nemo file manager for a while now but I'm wanting to remove Cinnamon and have only Openbox and Awesome installed. The only thing that's stopping me now is I'm unsure of what to use for a file manager. The feature of Nemo that I really like is the ability to show folders in tree view in the main pane when in detailed list view. I know that most of them probably have the tree feature in a side pane but I want it in the main pane.
    I'd like something with as few dependencies as possible since I'm wanting a more minimal approach to my system. Nemo requires Cinnamon, I'm guessing that Nautilus has the feature that I'm looking for as well but that requires Gnome.
    Can anyone recommend another file manager with this feature? Or is there any way to install Nemo/Nautilus without their desktop dependencies?

    drcouzelis wrote:It doesn't look like Nemo requires Cinnamon. What do you mean?
    claire ~ % pacman -Qi nemo
    Name : nemo
    [snip]
    Depends On : libexif gvfs dconf desktop-file-utils exempi python2
    cinnamon-desktop gnome-icon-theme libnotify libxml2
    cinnamon-translations
    I think this is what is meant.
    d72 wrote:Can anyone recommend another file manager with this feature? Or is there any way to install Nemo/Nautilus without their desktop dependencies?
    Not really, since those libraries are required to run the respective file manager.

  • FWIW: Advanced Color Management with HP printers

    As I mentioned in another thread my HP Deskjet 5650 is beginning to fail so I'm in the market. As much as I like the hard won results and convenient availability of supplies I'm tired of not being able to over-ride HP's color management and let Elements control the printer's color space.
    After some very frustrating research on HP's site I am surprised to learn that the following full size printers allow exactly that and quite a few of their 4x6/5x7 printers, too:
    Deskjet 5420v, 5440, 5740, 5940, 6500, 6620, 6830 and 6840 Series
    Photosmart 7960, 7850, 8050, 8250, 8250v, 8250xi, and 8253 Series
    The research was frustrating because very few of the technical pages for those models mention that color can be managed by the application.
    Finally a search of their support site for "Advanced Color Management" brought up the list.

    I have the same problem - no idea what to do to correct.  Yesterday I replaced the magenta cartridge and within an hour it was telling me the cartridge was empty.  Turned it off and today when I turned it back on it sees the magenta cartridge as full.  Useless as it is tho, with the colors all pink.

  • Quality Manager with Contact Center Enterprise (not Express)?

    Is Quality Manager (part of the Workforce Optimization package) supported with Contact Center Enterprise?  The documentation focuses on Express only.
    Thanks,
    Tom

    You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

  • Advanced Quality Manager - CR

    Hi Guys,
    I Will install the solution WFO with WFM and AQM with Network Recording in a VM Enviromment. The UCM and UCX (primary) is installed, but the WFO Solution need more attention for me, because this is my first deployment of this =/
    Questions:
    1º The WFM and AQM Base Server, can use a single SQL Database or each app require your own DB ?
    2° The Recording Server require a SQL DB ?
    3º Is In this step that I need to configure the IP of the Recording Server ? ?
    4º What options I need check when install the AQM in Recording Server ? According the image below.
    As you can see, is doubts about the installation .... the install guide of this solution is a little different from UC´s install Guide.
    Any help will be appreciated.
    Leonardo Oliveira
    www.avvid.net

    Hello I am a engineer at Calabrio, so let me provide the correct answers to your questions.
    1º The WFM and AQM Base Server, can use a single SQL Database or each app require your own DB ? Each product needs a seperate instance of SQL. They can be on the same SQL DB as long as the required resources are available for each instance. I would suggest a minimum of 2 CPU and 2GB or RAM for each instance.
    2° The Recording Server require a SQL DB ? No the record servers do not need a DB. Only 1 SQL DB per QM or WFM system is needed.
    3º Is In this step that I need to configure the IP of the Recording Server ? ? Yes, for offboard servers you would select the local IP to be used for network communication.
    4º What options I need check when install the AQM in Recording Server ? According the image below. For an offboard record server you just want to select the Recording component if you are doing Network Recording. If you are doing SPAN recording you need both the Recording and Monitoring components.
    For additional questions, please contact Cisco PDI.
    http://www.cisco.com/web/partners/tools/pdihd.html
    Thanks
    Frank

  • Advanced call manager

    Can advanced call manager be downloaded to N series Nokia mobiles free of charge ?
    This fantastic program was available within my downloads! on my E71 , and I did the download free of charge, is it the same case with N series ?
    Thanks in advance for your help

    03-Oct-2008 08:54 PM
    it_is_me wrote:
    Can advanced call manager be downloaded to N series Nokia mobiles free of charge ?
    This fantastic program was available within my downloads! on my E71 , and I did the download free of charge, is it the same case with N series ?
    Thanks in advance for your help
    i think the advance call manager with the E71 is a trial only, and ultimately it will require a license, you can try to download from Nokia Software Market

  • Logistics Invoice verification and Quality Management

    Hi,
    We have good receipts in purchases orders, with materials that must pass quality inspection (with SAP QM quality management)
    I need to know if there is any u201Cstandardu201D way to connect quality management with logistics invoice verification; the requirement is that the invoice cannot be released to payment (unblocked) until the materials of the goods receipt have passed the quality inspection.
    Thank you very much for your help!!
    Manuel

    Dear ,
                  Here is the path
    IMG>> Quality Management -->QM in Logistic --> QM in Procurement -->Define Control Keys
    now here After Defining the Control Key, Go to QM in Procurement Tab
    and Check the Block Invoice Checkbox
    This may help u
    REgards,
    Pardeep Malik

  • Cisco Quality Management 8.5 license error

    Dear networkers,
    After installing the Cisco Advanced Quality Management product (from DVD) and while configuring the "site configuration setup" and after clicking on next button; we face the following error message :
    "Invlaid License : The number of maximum users muste be greater than 0" (message attached)
    Can you please advice ?
    thanks in advance.
    Cdt.

    Hi haouaswajih,
    Please check the below errors,
    QMLC2003
    Text:The maximum number of user licenses must exceed zero for the bundle
    Type:Error
    Add’l Info:For the specified bundle, the maximum number of users licensed must exceed zero.
    Action:This should be configured by the system administrator.
    QM1015
    Text:Maximum number of users on the license bundle type {0} is zero.
    Type:Error
    Add’l Info:Maximum number of users on the license bundle type is zero.
    Action:Contact Cisco Technical Support.
    Reference:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/workforce_optimization/qm_8x/reference/guide/qm852-ecd-cisco.pdf
    Hope this helps.
    Anand
    Pls rate helpful posts !!

  • SGD and VMware View

    Hi all,
    Is it possible to use VMware View (VDM) as desktop source for SGD?
    SGD works with the new upcoming Sun VDI 3.
    Regards,
    Wouter

    Just to clarify though, I state this as theory. SGD has not been testing with VMWare View.

Maybe you are looking for

  • Zireless keyboqrd rqndo, chqrqcters

    My keyboqrd doesnùt zork qny,ore:  Re::::paired but thqt didnùt help:  I was just typing along and suddenly it happened:  So I changed batteries; then paired keyboard with imac:  Same problem:  It;s as if the mapping changed: a key = q q key = a z ke

  • How to unlock process template in BPF

    Hi all, Hope all are doing good. I want to unlock a process template in bpf,previously it was locked by someone else. Version bpc10 sp17 Can anyone one help me?? Thanks, kiran.

  • At the opening aperture often tell me that the library has to be repaired

    at the opening aperture often tell me that the library has to be repaired

  • Dock icons not disappearing

    There is an icon on my dock that I don't need. Every time I start up my computer, I delete it off my dock. For some reason, every time I restart, my dock returns the icon to the dock. It doesn't start or anything..it just returns the icon. How do I f

  • Internet sites which are built on  iStore and iSupport

    We are planning to implement iStore and iSupport for our client. Looking for already implemented internet sites which are built on both istore and iSupport modules. We have seen many sites which are implemented on istore but none with iSupport. Any r