UCCX Agent Status when making a Outbound Call

Hi Need a little Help ! Advice with the  Above subject matter.
I have a customer, who is running reports with Historical reporting however the reports do not give a True reflection of Agents status.
i.e. if the Agent makes an outgoing call the Reports show the agent as being not ready.
I would like to know if it is possible to change how this is reported of if it is possible for the agent to add a note when on a call which would be reflected in the Historical reports.
Can we change the state it shows when an agent is on an outbound call to show "Outbound Call" instead of "Not Ready" as it currently shows ?
Cheers
Charles

Hi Charles
We have raised the same problem towards Cisco a long time ago. The fact that an agent talking is reported as "Not ready", instead of ex. "Talking Out" is not only a problem in HR, but also in some steps of scripting, since the agent is infact on the system and is anything but "Not ready".
Ex. you could check to se if any agent are logged in to CSQ, before selecting resource. If agents are logged in, you could check to see if number of agent logged in = number of agents not ready. If this is true, then no agents are available to answer call and another CSQ could be selected.
But now since an agent talking is reported as "Not ready" because he's talking, the check for agents logged in = agents not reayd might be true, causing script no to work as intended.
So for many reasons an agent talking should be "talking" and not "Not ready". I haven't heard about any workarounds on this agent state, but I do know that Cisco has been informed on this isseu and did recognise that it would make sense to implement but I don't know when this could happen. If not in verison 8.5, then perhaps in ver. 9.
You might be able to pull something from the DB to show correct agent state, but thats not "out of the box"
Regards
Henrik

Similar Messages

  • When making an outgoing call from my i phone, an icon of a microphone with a slash acroos it appears.  I can hear the receiving party speak, but he cannot hear me.  What has been shut off and how do I turn it on?

    When making an outgoing call from my i phone, an icon of a microphone with a slash across appears.  I can hear the recipient speakin but he cannot hear me.  What has been turnedd off, and how do I turn it on?

    I think mute is on, tap the microphone icon with the slash running through it

  • How do you reduce/turn off keypad sound when making a phone call

    How do you reduce/turn off keypad sound when making a phone call?

    If I understand the question correctly, it is not about turning off keyboard clicks, it's about silencing the beeps made when manually keying in a  phone number. With keyboard clicks turned off, the beeps still sound when keying in a phone number. If I'm reading the iPhone User Guide correctly, it explains how to turn off keyboard clicks but not how to silence the   beeps when keying in a phone number. The only way I have found to silence the beeps is to put the phone into silent mode.

  • How to mute Dial Pad keys when making a phone call

    Anyone knows wow to mute Dial Pad keys when making a phone call?

    There is no individual setting for this yet. Only overall silent profile.
    -: DrewRead :-
    Can't find an app on Blackberry World yet? Tweet the developer and ask when they will #GetWithBB10 !!
    "Like it" if you like it.

  • Internet connection only when making a phone call

    I own a Powerbook G4, I connect to the internet wireless via aiport. I can connect only when making a phone call, my ISP is virgin.net. I've changed the micro-filter. Can any one help me on this problem.
    Thanks
    Lee

    Thanks for the usefull information, I've contacted BT they are my telephone provider here in the UK, and they did a line test, not a mechanical test as by an engineer, and said the line is OK. My in-comming & out-going calls are fine, but with interference on the line. How did you get past this problem?

  • Screen stays on when making a phone call

    I am wondering if there is a setting for making the screen go black when making a phone call. I have done some research and it seems there should be a proximity sensor that makes the screen turn off when the sensor is activated. If there is no setting for this sensor then I have to believe that the phone is defective and must be returned - I just wanted to be sure that a setting doesn't exist to correct the problem before doing that. It is a Droid X2. Thank you in advance for any help provided! 

    Yes, there is a small "proximity sensor" in the upper left corner next to the ear piece.  When you "cover" it after making a call, the screen should go blank. If it is staying on when you cover that (with your face/ear or even your hand) if sounds like it is defective. There are no Settings that I am aware of that makes the screen stay "always on".  At least on my Droid X.
    Have you tried running in SAFE MODE just to make sure it's not some 3rd party app causing the problem?
    - Power Off
    - Press & hold the MENU button (far left button)
    - Power up phone, but continue to HOLD the MENU button for like 1-2 mins.
    Phone should come up saying "SAFE MODE" in lower left side.
    Test you issue.
    To get out of SAFE MODE, just power off & on as usual.

  • When making a phone call on my iphone I can hear the person that i am calling but they can not hear me

    when making a phone call on my iphone,I can hear the person that I am calling but they can not hear my voice

    My first new iphone4 was received and installed complete.
    Nothing to hear when i was calling, only when I used loudspeaker.
    complete reset and reprogrammed Iphone, same result.
    Called Apple support and received a new Iphone4 next day.
    Updated and programmed.
    It works.
    2 weeks ago My son's iphone4, same problem, could only call with loudspeaker??
    Anyone an Idea.

  • When making a phone call i cant be heard

    when making a phone call i can not be heard?

    ypur mic may be out which is a little hole down at the bottom of your phone. you can try powering the phone off and on then you can do a hard reset home button + power button for 30 sec or intell you get a apple logo. if that still isnt working you cna back up your information to itunes and then restore your phone as new. if your still having a problem then it is hard ware related and you can then get it replaced by apple for free if your within the limited warranty

  • When making a phone call I have to put it on speaker to hear the person I'm calling.

    When making a phone call I have to put it on speaker to hear who I'm calling. I can't hear when putting the phone to my ear.

    I had the same problem just one hour ago.  I could not hear the person I's talking to unless I put it on speaker.
    I restarted my iPhone 4 and still the problem was there.
    And it automatically started working again in one hour.
    I would suggest to shake the iPhone a little and try to reboot and see if it's helping.

  • I am not able to see the picture assigned on a contact when making a outgoing call in ios 7

    I am not able to see the picture assigned on a contact when making a outgoing call in ios 7

    Same issue

  • HT1430 when making/receiving a call, the person on the end of the phone cant hear me

    when making/receiving a call the person at the end of the phone cant hear me

    Look to the right in the "More Like This" box.  Your issue has been addressed in countless posts.  Always an act of forum courtesy to search before posting, FYI.
    Best of luck.

  • Hi I have an iphone 5. When making and receiving calls I can't hear the other person. Has anyone else had this problem?

    Hi I have an iphone 5. When making or receiving calls I can't hear the other person? Anyone tell me what is going on?

    Try taking a look at this support document to see if the steps there help. If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support

  • When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

    When making an outgoing call, it rings once and then says 'Call failed' - any solutions?

    I had the same problem!! I had to complain quite a few times to AT&T  & found out I had to get the 3G MicroCell device. You also have to pay an extra $20 a month for it! You have to purchase it yourself($200)...which is a bunch of crap too!! But they can research your area & when they finally figure out that it's a bad servise area they will give it to you for FREE!! Now my phone works like it's supposed to!! So check it out!!  Good Luck!! 

  • As of yesterday, when making or receiving calls, I can hear the person on other end, but they can't hear me unless I use the speaker???

    When making or receiving calls I can hear the person on the other end, but they cannot hear me unless I use the speaker option.

    Look to the right in the "More Like This" box.  Your issue has been addressed in countless posts.  Always an act of forum courtesy to search before posting, FYI.
    Best of luck.

  • How can I fix: problem when making or receiving calls I must be on speaker, otherwise the person on the other end can't heAr me

    When making or receiving phone calls I have to be on speaker for the other person to hear me. What can I do to fix this

    Had the same problem when my dock connector of the iphone got wet. The phone thought that it was docked the whole time so the mic and speaker didn't work. The iPhone actually has 2 microphones. One is at the bottom by the dock connector (which is used for normal calls), and the other is a tiny whole at the top by the headphone jack, which is used for speakerphone. I would say that either the bottom mic needs replacing, or the dock connection is faulty or damaged and it is not able to use the bottom mic.
    Best bet would be to get it to Apple who will normally fix this kind of thing without fuss. Hope that helps.

Maybe you are looking for

  • Master-Detail Detail does not refresh after it's been empty

    I have a master detail page (both are tables) that works just fine, until I click a master record that has no details. After that the panelHeader of teh detail is refreshed with the PPT but the table underneath it is not, I keep seeing "no rows yet",

  • Clarification for reloading purchased apps on iPod

    I think I know the answer but I wanted to double-check before proceeding: I recently did a fresh re-format and re-install on both of my Macs (10.6 on the Intel MBP and 10.5.8 on the G5 iMac), moved my music collection that was on the iMac to a networ

  • Can I backup an external hard drive with time machine

    I have my IPhoto library on an external hard drive and want to include this in my time machine backups.

  • Data transfers from SRM to R/3

    Hi, i have follwing questions? 1. How date transfer from SRM to R/3? 2. Why PO transfer throught RFC? why not IDoc? and why confirmation and invoices are transfer using IDOC?. 3. config document for EBP-SUS? Thanks Rams

  • How to increase my server performance ?

    hi experts, my environment is 4.7E,SQL,Windows 2003 Server with 150 users. ibm xseries 346 with 6 gb ram min response time is 1000 (m.sec) to 1500 per 140 logon users. how can i decrease this response time ? Please give me your valuable suggestions.