UCCX Application manager service are in partial

After upgrade the uccx from 8.2 to 8.5 then application manager services are show in partical state.
Under UCCX service enginer.
application manager service are show ( PARTIAL_SERVICE).
I check the jtapi username and password are ok, I check the CTI route point and CTI port are registered.
Please can you help me on that how to resolved this issue.

Hi Ketanpatani,
Please run the JTAPI and Data Resyn operation from the UCCX Admin-> CUCM Telephony subsystem and look out for any inconsistencies between UCCX and CUCM.
Make sure all the CTI route points\ Triggers in enabled state.
If you have a UCCX HA setup, make sure to run all the services are in master state in UCCX Node1 (for this you can just reboot the UCCX second node so that all the services are running in master state from first Node of UCCX).
Thanks,
Anand
Pls rate helpful posts !!

Similar Messages

Hi, my "adobe application manager" files are damaged, can't download

Hi, my "adobe application manager" files are damaged, when I try to download an adobe application it just won't start because of that damaged "adobe application manager", I tried to find how to (re-)download/install "adobe application manager" but with out success and I realy need to download it tonight

uninstall whatever cs version you need to replace, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then reinstall.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Fabric Interconnect B, management services are unresponsive

Hi,
We have configured Call Home option in UCSM and we are getting below error from Call Home option since last Saturday. We have open TAC with Cisco to troubleshoot this error but as per TAC "The error is a transient error from which the fabric interconnects can automatically recover."
Below is the error messages we are getting
E-mail-1:
Subject:
System Notification from System-A - diagnostic:GOLD-major - 2011-12-27 17:54:09 GMT-00:00 Fabric Interconnect B, management services are unresponsive
Body Message:
System Name:System-A
Time of Event:2011-12-27 17:54:09 GMT-00:00
Event Description:Fabric Interconnect B, management services are unresponsive
Severity Level:6
E-mail-2:
Subject:
System Notification from System-A - diagnostic:GOLD-major - 2011-12-27 17:54:09 GMT-00:00 Fabric Interconnect B, management services are unresponsive
Body Message:
<?xml version="1.0" encoding="UTF-8" ?>
<soap-env:Envelope xmlns:soap-env="http://www.w3.org/2003/05/soap-envelope">
<soap-env:Header>
<aml-session:Session xmlns:aml-session="http://www.cisco.com/2004/01/aml-session" soap-env:mustUnderstand="true" soap-env:role="http://www.w3.org/2003/05/soap-envelope/role/next">
<aml-session:To>http://tools.cisco.com/neddce/services/DDCEService</aml-session:To>
<aml-session:Path>
<aml-session:Via>http://www.cisco.com/appliance/uri</aml-session:Via>
</aml-session:Path>
<aml-session:From>http://www.cisco.com/appliance/uri</aml-session:From>
<aml-session:MessageId>1058:SSI1442BFRC:4EFA0641</aml-session:MessageId>
</aml-session:Session>
</soap-env:Header>
<soap-env:Body>
<aml-block:Block xmlns:aml-block="http://www.cisco.com/2004/01/aml-block">
<aml-block:Header>
<aml-block:Type>http://www.cisco.com/2005/05/callhome/diagnostic</aml-block:Type>
<aml-block:CreationDate>2011-12-27 17:54:09 GMT-00:00</aml-block:CreationDate>
<aml-block:Builder>
<aml-block:Name>UCS 6100 Series Fabric Interconnect</aml-block:Name>
<aml-block:Version>4.2(1)N1(1.43q)</aml-block:Version>
</aml-block:Builder>
<aml-block:BlockGroup>
<aml-block:GroupId>1059:Serial Number:4EFA0641</aml-block:GroupId>
<aml-block:Number>0</aml-block:Number>
<aml-block:IsLast>true</aml-block:IsLast>
<aml-block:IsPrimary>true</aml-block:IsPrimary>
<aml-block:WaitForPrimary>false</aml-block:WaitForPrimary>
</aml-block:BlockGroup>
<aml-block:Severity>6</aml-block:Severity>
</aml-block:Header>
<aml-block:Content>
<ch:CallHome xmlns:ch="http://www.cisco.com/2005/05/callhome" version="1.0">
<ch:EventTime>2011-12-27 17:54:09 GMT-00:00</ch:EventTime>
<ch:MessageDescription>Fabric Interconnect B, management services are unresponsive</ch:MessageDescription>
<ch:Event>
<ch:Type>diagnostic</ch:Type>
<ch:SubType>GOLD-major</ch:SubType>
<ch:Brand>Cisco</ch:Brand>
<ch:Series>UCS 6100 Series Fabric Interconnect</ch:Series>
</ch:Event>
<ch:CustomerData>
<ch:UserData>
<ch:Email>[email protected]</ch:Email>
</ch:UserData>
<ch:ContractData>
<ch:CustomerId>[email protected]</ch:CustomerId>
<ch:ContractId>ContractID</ch:ContractId>
<ch:DeviceId>N10-S6100@C@SSI1442BFRC</ch:DeviceId>
</ch:ContractData>
<ch:SystemInfo>
<ch:Name>System-A</ch:Name>
<ch:Contact>Name</ch:Contact>
<ch:ContactEmail>[email protected]</ch:ContactEmail>
<ch:ContactPhoneNumber>+00-0000000000</ch:ContactPhoneNumber>
<ch:StreetAddress>Office Address</ch:StreetAddress>
</ch:SystemInfo>
</ch:CustomerData>
<ch:Device>
<rme:Chassis xmlns:rme="http://www.cisco.com/rme/4.0">
<rme:Model>N10-S6100</rme:Model>
<rme:HardwareVersion>0.0</rme:HardwareVersion>
<rme:SerialNumber>SerialNumber</rme:SerialNumber>
</rme:Chassis>
</ch:Device>
</ch:CallHome>
</aml-block:Content>
<aml-block:Attachments>
<aml-block:Attachment type="inline">
<aml-block:Name>sam_content_file</aml-block:Name>
<aml-block:Data encoding="plain">
<![CDATA[
<faultInst
ack="no"
cause="management-services-unresponsive"
changeSet=""
code="F0452"
created="2011-12-27T23:24:09.681"
descr="Fabric Interconnect B, management services are unresponsive"
dn="sys/mgmt-entity-B/fault-F0452"
highestSeverity="critical"
id="2036245"
lastTransition="2011-12-27T23:24:09.681"
lc=""
occur="1"
origSeverity="critical"
prevSeverity="critical"
rule="mgmt-entity-management-services-unresponsive"
severity="critical"
status="created"
tags=""
type="management"/>]]>
</aml-block:Data>
</aml-block:Attachment>
</aml-block:Attachments>
</aml-block:Block>
</soap-env:Body>
</soap-env:Envelope>
We want to understand that what is the impact of this error and is there anything that we can do to prevent this error? Also want to know what might be the cause get this error?
Let me know if anything else is needed from my side
show-tech file uploaded.

Padma,
TAC Engineer sent below mail
Hi Amit,
I’ve checked through the show tech you’ve uploaded and have not found any indicators of errors for the error message you are seeing.
As I mentioned in the call, the error is a transient error from which the fabric interconnects can automatically recover from. The recommended action is to wait for a few (10-15min) to see if the error clears automatically. If the error does not clear then we will need to do further troubleshooting. This error on its own is not a cause for worry. As you have HA in your system the management services would have failed over the to the other fabric interconnect and would not affect your system performance.
We can leave the system under observation for a few days to see if other errors occur concurrently with this error.
I will upload show-tech logs here, find my reply below
Is the alert generated only for FI B or both FIs ->> Amit: Alert generated for FI-B only
Any change in cluster state corresponding to alert time stamp ->> Amit: Unfortunately when this error generating we are unable to see the cluster state because of timing. If you can guide / suggest from any other location I can find the state that will be helpful
Cluster physical link status ->> Amit: Cluster link is OK
Does FI have any core dumps ->> Amit: I don't have any idea about this. How can check this ?
Regards,
Amit Vyas

CSCul38768 - Management services are unresponsive fault seen

Our UCS hit this bug and we found the VM hosted on each blade got timeout also. It caused some of the VM rebooted and vCenter reported shared disk cannot access during the captioned moment.
Did anyone have similar experience before?

Padma,
TAC Engineer sent below mail
Hi Amit,
I’ve checked through the show tech you’ve uploaded and have not found any indicators of errors for the error message you are seeing.
As I mentioned in the call, the error is a transient error from which the fabric interconnects can automatically recover from. The recommended action is to wait for a few (10-15min) to see if the error clears automatically. If the error does not clear then we will need to do further troubleshooting. This error on its own is not a cause for worry. As you have HA in your system the management services would have failed over the to the other fabric interconnect and would not affect your system performance.
We can leave the system under observation for a few days to see if other errors occur concurrently with this error.
I will upload show-tech logs here, find my reply below
Is the alert generated only for FI B or both FIs ->> Amit: Alert generated for FI-B only
Any change in cluster state corresponding to alert time stamp ->> Amit: Unfortunately when this error generating we are unable to see the cluster state because of timing. If you can guide / suggest from any other location I can find the state that will be helpful
Cluster physical link status ->> Amit: Cluster link is OK
Does FI have any core dumps ->> Amit: I don't have any idea about this. How can check this ?
Regards,
Amit Vyas

Service applications and services

What is the difference between services and service applications in sharepoint 2013. I am talking about
1. Application Management->Service Applications -> Manage service applications
2. Application Management->Service Applications -> Manage Services
They both are listed under service applications
Also if I create a Managed Metadata service from Application Management->Service Applications -> Manage service applications->New it
wont turn on Managed Metadata Web Service by itself during the process. So how are they tied to each other.
@R

Take a look at: http://www.harbar.net/articles/sp2010sa2.aspx
Correct, if you create a Service Application, it doesn't automatically start the service instance (as you may want the SA, but only want to run the SI on specific SharePoint servers). Where the SI runs is where the actual 'work' for that SA occurs.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to access Oracle Application Manager

Dear All,
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.
Kindly mention the step by step procedure.
Regards,
Asif

Hi Asif;
I have installed EBS R12.0 in Oracle Enterprise Linux Release 4 environment. Through browser I am able to login using sysadmin username and password however I am unable to find Oracle Application Manager or AutoConfig option any where. Can any of you please tell me how I can enable or access OAM.For OAM:
Login as sysadmin >> System Administrator>> Oracle Applications Manager (There are link under this)>> click dashboard then u will see Site map top of page click it
you will see System Configuration>>AutoConfig there
Regard
Helios

Application manager does not show Acrobat Pro in the list of apps

So I cannot use the application, because of a defect in the list of applications.
The serial number applies to Acrobat Pro, but it doesnt show up in the list of aplications in the application manager.

Veldenb are you a Creative Cloud Member or do you have a subscription to Acrobat? If so please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html for information on how to have Acrobat become available.
Please also see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for additional information regarding installing and updating Adobe Creative applications.

Application manager / Partial service - UCCX 8.5

Hello there,
Generally I am able to troubleshoot a subsystem on partial service looking at the MIVR logs but at this time I don't see anything.
I restart the UCCX engine and immediatly I download the logs, I see how everything is restarted but I don't see the reason why the app service remains in partial service.
Any idea with that? I attach the logs just in case. It's a HA configuration so I am attaching the logs from both servers.
Thanks in advance

Hi
This will be your problem:
3075: Apr 25 09:06:21.243 CEST %MIVR-APP_MGR-7-APP_DISABLED:Application disabled: Application=App[name=AreaRedes,type=Cisco Script Application,id=7,desc=Area de Redes,enabled=true,max=20,valid=true,cfg=[ApplicationConfig[schema=ApplicationConfig,time=2012-03-13 15:57:09.0,recordId=285,desc=Area de Redes,name=AreaRedes,type=Cisco Script Application,id=7,enabled=true,sessions=20,script=SCRIPT[pruebas.aef],defaultScript=,vars=[,,,,,,,,,,,,,,,,,],defaultVars=null]]],Exception=com.cisco.app.InvalidApplicationException: failed to load script; nested exception is:
com.cisco.script.ScriptNotFoundException: user script '/opt/cisco/uccx/Scripts/user//pruebas.aef/
Looks like pruebas.aef has possibly been deleted?
Set that application to a different script or something to prove it...
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Application Manager in partial service, date format exception

Hi; I was pulling MIVR logs as I see the Application Manager is in partial service. I see an exception of formating the date, but I'm not sure where to go to correct it or if that is even the right thing to focus on. Kind of new to looking at these logs and they seem pretty daunting. I took them righter after an Engine Restart, which usually fixes this partial service issue yet it still is quite large.
Any ideas?

Hi,
The application manager in partial Service can be due to one of the following:
1. An application is referencing a script that was deleted from the script management causing the application to be invalid.
2. The script in itself is invalid.
When we have a system with multiple applications, it becomes really hard to find out the culprit application without the logs.
For this, the easiest way would be to login to Cisco Unified CCX Administration -- Tools -- Real Time Reporting.
Click on First tab and go to Applications.
It will show all the applications and then flag it as Valid -- True on the last column. If this is False, then we can proceed with checking that application.
Note: RTR is a tool highly dependent on JAVA. Check the JAVA version on CCX compatibility matrix and use the same. Else use IE with compatibility mode turned on for viewing this tool,
Regards,
Arundeep

User Profile Application and Managed Metadata services are missing

Running SharePoint 2013 servers on a set of 2012 R2 Servers. One of our farm administrators deleted the Secure Store service account. They recreated the Secure Store account, but after doing so, the Managed Metadata Service and User Profile Service
are now unavailable.
When going to the User Profile Page, there is an error that says "Sorry, something went wrong."
When going to the Metadata page, there is an error that says "The Managed Metadata Service or Connection is currently not available."
There is an additional error that says "The Security Token Service is not available."
How can all three services be brought back online?

That specific event log error is as follows:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/12547953
Exception: System.ServiceModel.ServiceActivationException: The service '/SecurityTokenServiceApplication/securitytoken.svc' cannot be activated due to an exception during compilation. The exception message is: Exception has been thrown by the target
of an invocation.. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentNullException: Value cannot be null.
Parameter name: certificate
   at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate, String id, Boolean clone, Boolean disposable)
   at System.IdentityModel.Tokens.X509SecurityToken..ctor(X509Certificate2 certificate)
   at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceManager.ConfigureTokenHandlerCollection(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key, SecurityTokenHandlerCollection&
tokenHandlerCollection)
   at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration.ConfigureTokenHandlerCollectionForLocalIssuer(SPSecurityTokenServiceManager manager, SecurityTokenHandlerCollectionManager collectionManager, String key)
   at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceConfiguration..ctor()
   --- End of inner exception stack trace ---
   at System.RuntimeTypeHandle.CreateInstance(RuntimeType type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck)
   at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance(Type type, Boolean nonPublic)
   at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes, StackCrawlMark& stackMark)
   at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes)
   at System.Activator.CreateInstance(Type type, BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateSecurityTokenServiceConfiguration(String constructorString)
   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
   at Microsoft.SharePoint.IdentityModel.SPSecurityTokenServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   --- End of inner exception stack trace ---
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath, EventTraceActivity eventTraceActivity)
   at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath, EventTraceActivity eventTraceActivity)
Process Name: w3wp
Process ID: 5504

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests

Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
Jaz

Hi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz

Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.

Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, Kedar

Hi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar

Enterprise Manager can't show web-service in the web-services area

I'm deploying my application(stateless web-service) it work's well, but Enterprise Manager show that it's not a web-service, it can't show application in the web-services area, this fuсking server have many-many-many bugs and errors (fuсking developers was drunken a lot, imho), documentation's have many errors too, and I hate this server, but I need to use it on my work :-(
p.s. read documentation's carefully it have many errors.
p.p.s. From Russia with LOVE! Russian developers are the best from the best!

Hello,
Could you be more specific about the version of OracleAS you are using?
- which exact version ? (10.1.3.x, 10.1.2.x or 9.0/x)
- which kind of Web Service are you developing? (J2EE 1.4/JAX-RPC or earlier version)
Also if you find bug in the documentation or product please send let the Oracle Support Service knows.
Regards
Tugdual Grall

HP Connection manager service not installed. Application will exit

I'm actually having a number of problems with this laptop, but I figured I'd start with this one. I get the message "HP connection manager service not installed. Application will exit.
As strange as this may seem, when I get this message, I also cannot open any of the folders on my desktop. I don't know if the problems are related or not.
Any help is appreicated !
If this helps its model number is A5F92AV

Hi @krazykat_randi ,
Welcome to the HP Forums!
It is a superb place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having multiple issues with your notebook, one of which is when you try to open the connection manager you get the message "HP connection manager service not installed. Application will exit.". You also can not open folders on your desktop.
Have you checked for viruses or malware? MS Malicious Software Removal Tool.
This is not a recommendation but many people have used Malwarebytes with success also.
Have you tried running MS Fix It to aid with overcoming issues?
Have you tried doing a restore back to when it was working properly?
If you still have issues I suggest you do a recovery back to factory.
HP PCs - Performing an HP system recovery (Windows 7)
If you have not yet done a backup you will have an opportunity during the recovery to do one.
HP PCs - Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
Hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

UCCX Application manager service are in partial

Similar Messages

Maybe you are looking for