UCCX Enhanced License upload issues

I have a site that is under the gun to finish a UCCX migration from 4.0 to 7.0 We put in for the license upgrade using a PAK but when we load it the system tells us that it is not valid to upgrade using this file from "NONE" Generally that section tells you what files you already have if you add a feature license file.
We opened a case with TAC but in the meantime we loaded an NFR license file so we could start to configure the system. I then found a PAK for 4-5 to 7 for another site that is being closed. When I got that license file back and tried to run the set-up Wizard again, it tells me the new license is not a valid upgrade from Premium and will be ignored.
Does this mean I will never be able to get off the NFR license? Am I stuck on this license file even if I get my correct one tomorrow or the next day?
thanks

Yes, that is correct that you need the 4.x main system license plus the NEW upgrade license, but the main issue here was "What do I do if my system is running incorrect licensing?" And the answer is, you need to reset the flag for the Web GUI to Fresh Install and you need to delete the references to the existing license files. Both actions are done through the Windows on-board support tool accessed via Start-->Run
I would not recomend doing this the first time without TAC on the line, but if anyone else wants to provide the command you use to access this tool, feel free. It escapes me at the moment.

Similar Messages

  • Wlc-2504-k9 ap license upload issue

    Hi i have 20 access points and wlc controller with 15 ap supported .I got 5 ap license but am not able to upload .
    Temproray i have enabled evaluation license which is valid 12 weeks . but when i tried to upload the liecense its giving me error .
    Can anybody help me the exact steps .

    Hi Breeze,
    I think its normal behaviour for Cisco WLCs.
    Example: It happend with me.
    Old licence was for 15APs
    if you add 5 more ap licence to WLC then old Licence will go in inactive state but evaluation License will be in use.
    After evaluation period you will get the total 20 AP licence in in use status.
    This happend with me.
    I think this guy I also have similer issue: https://supportforums.cisco.com/thread/2205144
    If you still have doubts or issues then please go for TAC case.
    Hope it helps.
    Regards

  • MSE-license uploading issue

    Hi,
    I have installed WCS version 7.0.164.0 and have added Mobility Service Engine to WCS. The version of MSE is 7.0.105.0. I ahve uploaded license in WCS for supporting 200 APs. Then when i am trying to upload MSE liecnse, I am getting the below error.
    MSE license file could not be installed. The total license limit has been met or exceeded for the MSE and all its services. Capacity is exceeded by 5%. Reduce the license count for one or more services to be within the capacity limit and for optimal performance.
    Please let me know how should i proceed further.

    I'm going thru the same thing right now and this is a bit confusing.  What I do know is that there are 2 types of licensing and depending on what it is you want to do you want one of the other or both. The licenses are explained below.  I hope this helps.
    Two types of Licenses:
    •1.       wIPS – Adaptive Wireless Intrusion Prevention
    •a.     Maintain a constant awareness of your RF environment to minimize legal liability, protect your brand reputation, and assure regulatory compliance.
    •b.     Cisco Adaptive Wireless Intrusion Prevention System (IPS) offers advanced network security for dedicated monitoring and detection of wireless network anomalies, unauthorized access, and RF attacks. Fully integrated with the Cisco Unified Wireless Network, this solution delivers integrated visibility and control across the network, without the need for an overlay solution.
    •2.       Context Aware – for locating wireless devices 
    •a.     With Context-Aware Software, organizations can quickly locate rogue devices, interferers, Wi-Fi clients, tagged assets, and wired devices. This physical location information provides the insight needed to improve workflow, quickly troubleshoot mobile clients, and implement asset management solutions.
    Sandi

  • The enhanced picture uploaded for ebay is not visible in Firefox but is in IE

    I sell on ebay and like using the enhanced picture uploader. I still able to use this uploader on IE but Firefox does not even allow ebay to show it as an option. I am very new to Firefox so I am certain it is a setting I need to change. Any and all assistance is very much appreciated.

    Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we did

    having trouble installing ProIX on new Windows 8 machine after XP crash.  Get almost ll of the way through and get an error box ... contact system support.  Only way out is to abort and then it un-installs.  Wondering if a licensing max issue since we didn't get an opportunity to uninstall off of crashed machine?

    Hey robr72339266,
    With a single user license, you can install Acrobat on maximum two computers, say, your laptop at work and desktop at office.
    But, you cannot use Acrobat on both the machines simultaneously.
    You will first need to deactivate Acrobat from the old machine, then install and activate the software on the new OS with the same serial key.
    Please Contact | Adobe to seek help on the same.
    Regards,
    Anubha

  • All plugins uptodate but on upload file get "USING one of the supported browser with latest Adobe Flash is required to experience enhanced file upload features

    I am freelancer. When I tried to upload files on elance it give following error and disable the upload button:using one of the supported browser with latest Adobe flash is required to experience enhanced file upload features.
    All plugins are up to date. Flash version 11.7 installed.

    I assume Firefox 19 worked fine on the site?
    Some sites may be mistakenly identifying Firefox 20 as Firefox 2, which is a very old version they probably no longer support. As a test, you could "lie" to the site about your Firefox version and see whether that little deception works.
    This take a minute to set up. Here's how:
    (1) Select and copy the following preference name to the clipboard:
    general.useragent.override.elance''.''com
    (2) In a new tab or window, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (3) In the filter box, type '''override''' and pause while the list is filtered
    (4) Make sure '''general.useragent.site_specific_overrides''' is set to its default value of true (or right-click and choose Reset if it is not).
    (5) Right-click anywhere in the preference list area and choose
    New > String
    then paste the preference name you copied. Click OK and enter TEMP or asdf or any text as a temporary placeholder. You should see the preference added in bold. Leave about:config open and switch back to this tab.
    (6) Select and copy the following useragent string to the clipboard ''(it's all one line)'':
    Mozilla/5.0 (Windows NT 6.1; rv:19.0) Gecko/20100101 Firefox/19.0
    (That's Firefox 19 on Windows 7 32-bit)
    (7) In about:config, double-click '''general.useragent.override.elance''.''com''' and paste to replace the temporary text with the new useragent string. Click OK, you're done here.
    Now try reloading a page where you need to upload (use Ctrl+Shift+r) and test that function again. Any change?

  • Uploading issues to other providers than .mac

    has anyone had uploading issues to other providers than .mac??

    can the names of the pages have spaces in them, or do
    i have to change both the file name and the name of
    the page?
    As the note says, some servers will let you upload files with spaces in their names, and some will not. Names without spaces will always work.
    In iWeb, the name you give to a site or page is the same as the name of the folder or file associated with it. So to avoid spaces in folder or file names, you need to omit them in the site and page names, or replace by hyphen or underscore.

  • Contact Center Enhanced License for Cisco 2951 Router

    Hi,
    I need an urgent help to get the exact part number/details of Contact center enhanced license.
    I couldn't find in CCW or any other tool about this license with Cisco 2951 Router (CISCO2951-V/K9).
    To run this license on mentioned router, do we need to order it separately or we can take it with router?
    Please respond asap.

    Hi Andre,
    I was just refering the Ordering guide which says
    Updating UCSS contract when upgrading Unified CCX licenses
    UCSS cannot be upgraded from one category to another (e.g. Standard to Enhanced). If
    the customer upgrades within the solution, they need to purchase UCSS for greater or
    equal value to cover the new version, then they can request a credit on the unused term
    of the original purchase from Customer Service
    you can also speak to [email protected] for more details on ESW.
    regds,
    aman

  • Solution Manager Enhancement Package 1 issue with SAINT

    Short Text    
    Solution Manager Enhancement Package 1 issue with SAINT    
    Long Text    
    Hi,
    We are trying to install the SAP Solution Manager Enhancement Package 1
    using SAINT. We have encountered an issue while trying to use the Stack
    Configuration option withing SAINT.
    Issue 1: A message appears saying OCS Package SAPK-701DHINSAPBASIS does
    not match current software component vector" . Whats does that mean and
    how do we resolve this issue?
    Issue 2: Ignoring the above message and going forward, we see the
    import condition page where it fails saying BBCPRM component must not
    be installed in this system
    Please check the attahed screen shots for the current Software
    Component levels and the errors.
    Please help to resolve the above issue and explain if we are missing
    anything here.
    Thanks,
    Nag Koppuravuri

    For the errors like ...
    "OCS Package <Package Name> does not match current software component vector" will usually appears when the upgrade is not matching the "MINIMUM support package level"
    Check note 1182336 - Though this note is not for the support package you are applying but the error points to same direction.
    To solve your problem...
    Please check the "Update Guide SAP Solution Manager 7.0 EHP 1 " available on Market place.
    Go to Service Market place -> Release & Upgrade Info -> Installation and Upgrade Guide
    To your left dropdown SAP Components -> Solution Manager -> Release 7.0 EHP 1 and on the right panel check above document Section "Preparations"
    If you satisfy those conditions I think you should be able to apply EHP1 smoothly.
    Lets us know if anything...
    Cheers!

  • LR 4/4.1RC and flickr uploading issues - resolved?

    Have the uploading issues between LR 4/4.1RC and flickr been resolved?  Waiting on upgrading from LR3, but the forum reports from unhappy flickr users wanting to "downgrade' are making me nervous.  Should I wait, just upgrade to 4.0 and leave the RC alone for now?  

    An update ...
    I have discovered that RC2 publishing does seem to be working (for me) but Flickr or LR seems to be objecting ("Invalid at the top level of the document") to specific images possibly relating to the contents of the caption field.
    I narrowed down the failure to just one image ... removed its caption... it published, I put the caption back on - "Invalid ..." error came back.
    FYI and not sure if relevant - I sometimes put http links in my caption fields.
    I would have come back with a more comprehensive test, but it now appears that LR will not communicate with Flickr at all, now saying it cannot contact the Flickr service, so I cannot investigate further yet.
    I know a little off the wall here ... but is it conceivable that Flickr itself has locked me out due to "erroneous" or suspicious content?     I have never had problems with LR talking to Flickr before today and publishing to SmugMug is still working fine.  

  • UCCX 8.51 demo license install issue

    I have UCCX 8.51 installed on vmware workstation 7.1, and first try to install demo license and interrupted, and after that never success to logon the GUI, so no chance to install the demo license again. Any clue to solve this issue?
    Thanks,

    Hi,
    License will come into picture when you are performing the UCCX initial app admin setup.
    I hope you have installed the UCCX OVA template before installing the UCCX on the supported UCS server. Please cross verify the same from the below link,
    http://docwiki.cisco.com/wiki/Virtualization_for_Unified_CCX
    Also check if the ip address of the UCCX is reachable, just to confirm no network issues.
    Thanks,
    Anand

  • UCCX license upload

    Hello All,
    Can someone help me answer my questions about uploading license to a UCCX 8.0.  We have a temporaly license that is no mongger valid and I received a new license.  As the UCCX is in production I am wondering if there is no risk uploading the new license?  does this require any reload of the server?  and what if the upload fail?  in general I want to understand if there is any risk uploading the new license.
    If you have any docs/url that explain that I will be happy to spend some time reading it.
    Thanks in advance.
    Carlo.

    Hello,
    According to the administration guide for UCCX 8.0 , there is nothing said about restarting any service when uploading a new license or adding a new license , i don't think there is any risk.
    Here is the link for your read :
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/configuration/guide/uccx801ag.pdf
    Amer

  • UCCX 10.0 Prompt Upload issue

                       Hi All,
    I have configured UCCX System version: 10.0.1.10000-50 in our Lab.When i try to upload prompt i am getting attached error.can anyone pls help on this?
    Regards,
    Mukesh

    Hi Mukesh,
    I think Gergely is talking about this defect:
    https://tools.cisco.com/bugsearch/bug/CSCts62130
    filename is truncated to 64 characters during script upload
    CSCts62130
    Symptom:
    saved prompts/scripts unavailable or do not appear on application/script
    management page when uploaded
    Conditions:
    prompt/script filename exceeds 64 characters
    But this is not the case since the filename is quite small, moreover you are using CCX 10, try renaming the prompt to something else and try again.
    HTH
    Chuck

  • UCCX HA Licensing

    Hi everyone, i have a question about HA Licensing...
    1. I already have an installation of UCCX 7.0 Premium, with the needed Seats.
    2. I'm buying ESW and UCSS to upgrade the software to an early version.
    3. I'm buying another MCS 7816-I5 to have HA.
    4. The question is: ¿What i need to buy to have HA in on my already implementation on UCCX 7.0?
    5. ¿Do i need buy CCX-70-PHA-7816I=?
    6. ¿Do i need any UCSS for CCX-70-PHA-7816I=?
    Thank you!

    Hi,
    Unfortunately UCCX 7.0 went End of Sale on 18 April 2011 so I do not think that you will be able to obtain the HA license.
    The End of Sale notice can be found at the link below:
    http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps7236/end_of_life_notice_c51-627280.html
    I guess that you could try talking to your Cisco account team to see if they can supply a UCCX 7.0 HA license if you were to buy the equivalent 8.5 license you would need to order CCX-85-A-PHA-LIC ($14,995). Unfortunately you would pay the same as someone buying HA for an MCS 7845 as there is now no distinction between server models.
    Another issue that you will have is that the MCS 7816-I5 is not supported by UCCX 7.0 - the page 33 of the compatibility matrix at the link below:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
    One piece of good news is that you do not need to buy additional UCSS for the HA license.
    My recomendation would be to move to UCCX 8.5.
    Please rate helpful posts

  • Adobe Connect pro 7.0 license upload

    Hello,
    I want to use Adobe conenct pro.
    When I installing the software I have entered serial key(<<removed by moderator>>), afterwards
    when I want to upload the license file has the following
    error
    (No message for validation error "format", type "id", field "field-id" )I added this error screen
    Edited by: Rob Burbank on Apr 25, 2011 1:11 PM

    Hello ikarayaka,
    I am running into the exactly same issue while uploading the Adobe Connect Enterprise Server (600) license. It would be great if you could share your experience and let us know what steps are required to have this issue resolved. I have already open a OSS message with SAP.
    Regards,
    - Furqan Illahi

Maybe you are looking for