UCCX error-remote UCCX node is not reachable

Hi,
I am working in UCCX 9.0,trying to upload new script developed thorugh UCCX script editor ,whenever I click upload script through "script management" tab,giving error as "remote UCCX node is not reachable,it is not recommended to create,modify or delete the files in this state,as it will be inconsistent between nodes",let me know any idea about this error.
Thanks,
Baskar.

Hi,
RTMT is configured and found the following error.
2013-11-11 04:11:39 :INFO: Received request to start the service Cisco Unified CCX Engine
2013-11-11 04:11:39 :INFO: Checking if PID File exists.
2013-11-11 04:11:39 :INFO: process Cisco Unified CCX Engine is not running
2013-11-11 04:11:39 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2013-11-11 04:11:39 :INFO: Cisco Unified CCX Engine initialization complete.... PID 18469 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 05:45:46 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 05:45:46 :INFO: Checking if PID File exists.
2014-06-05 05:45:47 :INFO: PID File exists, pid=18469
2014-06-05 05:45:47 :INFO: process Cisco Unified CCX Engine with PID 18469 might have crashed, PID file still exists
2014-06-05 05:45:47 :INFO: Stale PID entry 18469, removing PID file
2014-06-05 05:45:49 :INFO: Starting process Cisco Unified CCX Engine, Exe=/opt/cisco/uccx/bin/UCCX_Engine, Conf=/opt/cisco/uccx/conf/UCCX_EngineCfg.xml
2014-06-05 05:45:49 :INFO: Cisco Unified CCX Engine initialization complete.... PID 4201 updated in pid file /opt/cisco/uccx/conf/UCCX_Engine.pid
2014-06-05 07:04:03 :INFO: Received request to stop the service Cisco Unified CCX Engine
2014-06-05 07:04:03 :INFO: PID File exists, pid=4201
2014-06-05 07:04:03 :INFO: Stopping the Process Cisco Unified CCX Engine, pid=4201
2014-06-05 07:04:03 :INFO: Stopped the process Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Received request to start the service Cisco Unified CCX Engine
2014-06-05 07:28:29 :INFO: Checking if PID File exists.
2014-06-05 07:28:29 :INFO: process Cisco Unified CCX Engine is not running

Similar Messages

OBIEE Error 'Root XML Node nqw not found in island!'

Hello,
After I altered my Hyperion Essbase structure, my OBIEE Reports don't open.
I increase one generation in my accounts hierachy, and now when I try open my OBIEE reports, I get the follow error:
"Root XML Node nqw not found in island"
Any help?
Thanks,

Hi Naresh,
I hope you have resolved the issue by this time.
In my case, it was related to an invalid filter on the report.
I have removed the filter by updating the report .xml file from Catalog Manager.
Hope this helps other with similar issue.
Thanks,
Ravi

Ise node is not reachable after upgrading 1.2

Hi, I was using beta version of ISE with 1.2.834 code. and now the official release came out so I upgraded it.
after that, the ISE is not communicating with AD, and when I go to download logs, It says node is not reachable even though it is STANDALONE mode.
does anyone know how to work around this ?
should I just delete everything and go from scratch ?

The ISE is not communicating to the AD, So, you have to rejoin the domain. For this purpose please follow the following actions:
Go to Administration > Identity Management > External Identity Stores and select Active Directory from the left-hand pane.
Click Join at the bottom of the configuration page:
Also please check the LDAP port

Node Manager Not Reachable

Hi Everyone,
I'm very new to WebLogic, so I apologize if this is a dumb question.
I'm trying to install WebLogic as server for OBIEE. My environment is pretty simple. I have two Oracle Red Hat Linux 32-bit physical machines, let's call them WLS_SERVER and OBIEE_SERVER. I installed OBIEE on the OBIEE_SERVER and tested it using the out of the box OC4J container and that worked fine.
Then I installed WebLogic 11g on the WLS_SERVER machine and I ran the config.sh script. I used the configuration GUI to register the two physical machines and an additional server object called BIServer. Out of the box, web logic comes with AdminServer server object. I heard it's a bad practice to deploy applications to the AdminServer, hence why I created the BIServer object. I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."
How do I setup a Node Manager on the OBIEE_SERVER? Do I also need to physical put the WebLogic install file on the OBIEE_SERVER box and also run the installer there? Or there a copy paste thing I do? What am I missing here?
I appreciate the help!
-Joe

I'm trying to install WebLogic as server for OBIEEI have not heard about OBIEE, but if your aim is to use weblogic as a server for hosting this then you definitely need to install weblogic on the physical box where OBIEE will be hosted.
I associated BIServer with the OBIEE_SERVER machine.
I went to start the BIServer and I got the following error:
"For server BIServer, the Node Manager associated with machine OBIEE_SERVER is not reachable."Again not sure what is BIServer but I think you are missing a number of steps here. If you are trying to run BIServer
on weblogic you definitely need to install WLS on this physical machine [OBIEE_SERVER]. You will then need to configure a node manager on OBIEE_SERVER machine to enable it to start remotely from the admin machine.
Link for Node Manager. Since you are in Linux you can try setting up script based node manager.
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/server_start/nodemgr.html#wp1099239

Getting Error 'Root XML Node nqw not found in island!'

I have upgraded my setup from OBIEE 11.1.1.5.0 to 11.1.1.5.1 and then uploaded a catalog created in older version, 11g itself.
I'm able to run the dashboards and see all reports. They run absolutely fine, show all correct data.
However if I try to edit report or try to open them in Answers module .... from anywhere (Catalog Link/ Edit option below reports in Dashboard) it gives me this error.
" Root XML Node nqw not found in island! "
It's strange. I tried following:
1. doing a Upgrade of catalog by setting up parameter in instanceconfig.xml file
<Catalog>
<UpgradeAndExit>true</UpgradeAndExit>
</Catalog>
and then reverting back to false.
2. Also tried the GUID upgarde by setting parameters in instanceconfig.xml file and NQSConfig.ini file
none helped.
Any help?

Hi Naresh,
I hope you have resolved the issue by this time.
In my case, it was related to an invalid filter on the report.
I have removed the filter by updating the report .xml file from Catalog Manager.
Hope this helps other with similar issue.
Thanks,
Ravi

Activation error : context model node has not been bound to a model class

Hi All,
I have DC project, which i am able to run without error, But when i try to activate this DC project, I am getting below error in activation log : Please help me out, It's very urgent...
[wdgen] [Info]    Generating packages/com/ltli/crtmachineord/models/zp3019_dealer_default_valuesmodel/Zp3019_Dealer_Default_Values_Output.java
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Salesorder_Mac_Texts_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode T_Contract_Note_Text [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Zp3019_Get_Employee_Name_Input [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CrtMachineOrdComp --> ContextModelNode Output_Name [supplyingRelationRole]: Supply function or supplying relation role missing (Hint: A child node which is not mapped must have either a supplying relation role or a supply function or one of its parent nodes must have a supply function.)
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.CustnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
     [wdgen] [Warning] com.ltli.crtmachineord.views.longtextview.LongTextView --> TextEdit txe_LongText: UIElement does not have a label
     [wdgen] [Info]    com.ltli.crtmachineord.components.crtmachineordcomp.MatnoView --> Caption grp_equipmentnumber_Header: UIElement does not have a label
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesDocType_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOrg_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label DistChannel_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Division_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesOffice_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label SalesGroup_Lbl [labelFor]: Value is not valid
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label Plant_lbl [labelFor]: labelFor is not set
     [wdgen] [Error]   com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> TextView txv_Ename [text]: Context element and property are not compatible
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_CustNo [labelFor]: labelFor is not set
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_ConsigneeTo [labelFor]: labelFor is not set
     [wdgen] [Warning] com.ltli.crtmachineord.views.crtmachineordview.CrtMachineOrdView --> Label lbl_Pin [labelFor]: labelFor is not set
Thanks
Sandy

We could resolved the problem by creating new DC project
and copying the content of existing Dc project into new DC.
(Also created new activity for this new DC), Build & Deploy the project.
Now we are able to activate the new activity without any error.
Thanks
Sandy

IOS Remote Desktop App resolves hostname but throws Host is not reachable error.

Hello,
I am trying to use the Remote Desktop app on my iPad running iOS 7.0.2 to connect to a server through our Juniper VPN. When I type the hostname or IP address I get an error that say "Host is not reachable". If I connect through my Mac I have no
problem when on the same VPN. I have looked through all of the setting in Junos Pulse and it is setup to route all traffic through the VPN, and I do not know of anything that would be blocking it on the network end.
Edit: I am connecting to a Windows Server 2008 R2 box with RDP turned on with all types of connections.
Here is the log data for my latest attempt.
[2013-Nov-19 11:23:42] RDP (0): *** Application lauched ***
[2013-Nov-19 11:23:43] RDP (0): Application became foreground application
[2013-Nov-19 11:24:30] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2013-Nov-19 11:24:30] RDP (0): client version: 8.0.24094 on iPad3,4 (iPhone OS 7.0.3)
[2013-Nov-19 11:24:30] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:30] RDP (0): Showing credentials dialog
[2013-Nov-19 11:24:49] RDP (0): Final rdp configuration used: {
    activeUsername = "DOMAIN\\UserName";
    arcTimeout = 1800;
    cacheId = BEBD1725D63BB841;
    configurationVersion = 8;
    console = 0;
    host = "server.mysite.com";
    label = "Server";
    mouseMode = "-1";
    port = 3389;
    soundMode = 1;
    swapMouseButtons = 0;
    type = rdp;
    utilityBar = "-1";
    kCFProxyTypeKey = kCFProxyTypeNone;
[2013-Nov-19 11:24:49] RDP (0): --- BEGIN INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): lo0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2013-Nov-19 11:24:49] RDP (0): lo0 af=2 (AF_INET) addr=127.0.0.1 netmask=255.0.0.0
[2013-Nov-19 11:24:49] RDP (0): lo0 af=30 (AF_INET6) addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): en0 af=30 (AF_INET6) addr=fe80::66:9d3c:3d77:5cce%en0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en0 af=2 (AF_INET) addr=192.168.114.44 netmask=255.255.252.0
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): awdl0 af=30 (AF_INET6) addr=fe80::3c11:d7ff:feb2:7a82%awdl0 netmask=ffff:ffff:ffff:ffff::
[2013-Nov-19 11:24:49] RDP (0): en2 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=18 addr= netmask=
[2013-Nov-19 11:24:49] RDP (0): utun0 af=2 (AF_INET) addr=10.100.01.01 netmask=255.255.255.255
[2013-Nov-19 11:24:49] RDP (0): --- END INTERFACE LIST ---
[2013-Nov-19 11:24:49] RDP (0): Not using any proxy
[2013-Nov-19 11:24:49] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2013-Nov-19 11:24:49] RDP (0): Resolved 'server.mysite.com' to '10.100.01.01' using NameResolveMethod_Unknown(0)
[2013-Nov-19 11:25:09] RDP (0): Exception caught: Exception in file '/Users/build/jenkins/workspace/rc-ios-develop/protocols/RDP/cftcpendpoint.cpp' at line 242
    User Message : Host is not reachable
[2013-Nov-19 11:25:09] RDP (0): Error message: Host is not reachable(phase: 0, type: 0, reason: 0, systemCode: -1, systemMessage: )
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2013-Nov-19 11:25:09] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2013-Nov-19 11:25:09] RDP (0): ------ END ACTIVE CONNECTION ------
Cameron

Hi,
According to the log, your iPad tried to connect the remote server with IP address 10.100.01.01/32. Please check if it is the correct IP address of the server.
Also, please make sure that your iPad can connect to your VPN network successfully and get a valid IP address so that it can remote your internal server.
Thanks.
Jeremy Wu
TechNet Community Support

KNT0000107 - Remote batch process could not be submitted on

Hi All,
I Have Install new (lab system) JD Edwards E1 9.0 ,JDE Tools 8.98.4.5 on windows 2008 R2 64 bit,Oracle 11.2.0.2. 64 bit
with configuration like below:
1. Deploymemnt Server : Windows 2008 R2 64 bit
2. Enterprise Server (DB and App) : Windows 2008 R2 64 bit, Oracle 11.2.0.2. 64 bit,Oracle Client 11.2.0.2 32 bit
3. Tools Release Tools 8.98.4.5
4. Planner Esu JL16813
After install install new client (windows client) I try to submit batc Report ( R00921) but I got Error Remote batch process could not be submitted on ENT
I have actived Schedule server and add default printer already..
Colud you please advice if I missing somehing here
Thankyou
Zaenul

hi Zaenul
the scheduler does not take part in submitting UBE's from a (html)client.
From my guess I think that you did not setup any job queues. (P986130). From the menu; Report management -> batch processing setup -> Job Queues
If that does not solve the issue, please submit a UBE form the development client and check the jde.log (default in C:\jde.log but can be different depending in C:\Windows\jde.ini)
Hope this helps.
regards
Alaric

Remote server response was not rfc conformant

Hii folks, I have an issue with Exchange 2010 outbound mails.
Mails of some domains stuck in the queue with error "remote server response was not rfc conformant"
Appreciate your responds.

Hi,
According to your description, This issue is related to one of your clients. And I’d like to confirm if emails from the problematic user are stuck in the queue and other emails are delivered successfully.
If yes, I’d like to also confirm the version of the problematic user. Is it Exchange account? External user or internal user? Does it belong to a distribution group?
Additionally, I recommend to check the SMTP protocol log:
Understanding Protocol Logging:
http://technet.microsoft.com/en-us/library/aa997624(v=exchg.141).aspx
Configure Protocol Logging:
http://technet.microsoft.com/en-us/library/bb124531(v=exchg.141).aspx
Thanks,
Angela Shi
TechNet Community Support

Master/Slave Server is not reachable

We have standalone server install, but then I go to System->object finder and try to search something: i got the following error:
"Master/Slave Server is not reachable"

This typically indicates a problem with the System Identity User. Go to Common Services > Server > Security > System Identity Setup. Re-enter the username and password, and make sure the username points to an account with full access to all LMS applications and tasks.

ISE NODE NOT REACHABLE when building distributed deployment

I am trying to build a distributed deployment with the following personas:
2 policy admin nodes
2 monitoring nodes
4 policy service nodes
This was a project that was partially implemented but never in production. It was in a distributed deployment, but half the nodes were no longer working (http errors or devices weren't reachable or could not sync). I decided to start from scratch. All nodes were:
-de-registered
-application was reset to factory defaults on all nodes
-upgraded all 8 nodes to 1.1.4.218 patch 1
-installed all new certs and joined all nodes to the domain
-added to DNS forward and reverse lookup zones
When I make 1 admin node primary and register the other nodes (secondary admin, monitoring, policy services) the nodes successfully register and show up in the deployment window of the primary; however, all the nodes show as NODE NOT REACHABLE. After registration, I've noticed that the registered nodes are still showing as STANDALONE if I access the GUI. I've tried rebooting them manually after registration and they are still unreachable. I have also tried resetting the database user password from the CLI on both admin nodes and the results are always the same.

Originally I had added them all at the same time. I thought that maybe I just wasn't waiting long enough for the sync. I waited an entire day and all the nodes were still unreachable. At this point, I've de-registered all the nodes, rebooted all the nodes, converted the primary back to standalone (the remaining nodes never converted from standalone to distributed even when I rebooted them after registering despite a message that they were successfully registered), converted one node back to primary and tried to register just the secondary admin node giving it plenty of time to sync; this node is still not reachable from the primary.
I've quadruple checked the certificates on all the nodes, these certs were all added on the same day (just last week) and the default self-signed certs were removed.
I had restored from a backup on the primary so I might just rest the config on that node and try joining the other nodes before I restore again.

For server the Node Manager associated with machine is not reachable

Hello all,
I am getting this error, when i start my Managed Server which is in shutdown state
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The configuration details are
i am using weblogic 9.2 MP3 version in windows 2k3 server.
It has a machine vm-bea-dev, a cluster cluster-saa-dev, to which both the managed servers saa-dev-1 and saa-dev-2 are assigned. There are 3 applications deployed onto managed Server 1 and 1 for managed Server 2.
Managed Server 1 is in shutdown state, and when i start the server, it gives the error specified below
For server SAA-Dev-1, the Node Manager associated with machine vm-bea-dev is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager. No action will be performed.
The same for Managed Server 2 too, and this server is in Admin State, i dont know how it went into that state.
Can somebody please help me reslove it.
Thanks in advance

Actually the cert is coming from your Dev machine but it is sending the Prod cert.
What cert is used by your admin server ? It should match the host name.
So your Dev machine is apparently using a copy of the prod cert / keystore rather than using its own DEV cert. It's not clear from your post whether this is the nodemanager using the wrong cert, or the managed server. So both should be checked.
The managed servers need to be using a cert that matches their host name. If you have a managed server on VM-BEA-DEV, then the cert needs to be CN=VM-BEA-DEV. You can also use a load-balancer CN name in the cert if you have the cluster's HTTP values set to match.
In your nodemanager.properties, are you explicitly accessing keystores, such as with:
KeyStores=CustomIdentityAndJavaStandardTrust
CustomIdentityAlias=some_alias
CustomIdentityKeyStoreFileName=some_path_to_keystore
CustomIdentityKeyStorePassPhrase={3DES}...
CustomIdentityKeyStoreType=jks
CustomIdentityPrivateKeyPassPhrase={3DES}
In my multi-machine clusters, I have multiple certificates such as:
admin machine1:
has a cert for use by the admin server and NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers
all other machines:
has a cert for use by NM that matches the host name ( with node manager.properties entries such as the above )
has a 2nd cert that matches the load-balancer name for the cluster - used by the managed servers

UCCX 8.0 - 1st node crashed

Hi,
We have a 2-server UCCX 8.0 cluster running on UCS servers. Recently, when moving the publisher (1st node) to a new UCS server, we accidently deleted some files of the Virtual machine. (there are 2 folders in the datastore, named UCCX1 and UCCX1_1; my colleague deleted the UCCX1_1 folder as he thought it was not neccessary). After that, the ESXi kept asking for UCCX1_1\UCCX1_1.vmx file when we trying to boot the server. We had to re-add the server (browse to the vmx file in the datastore, and Add to Inventory); the server could boot up now, but I think we lost all the data (we cannot access to the Application web page).
Now we still have UCCX 2 running, could we force the 1st server to update its database to sync with the UCCX 2? If YES, how to do that?
If NO, what should we do? Re-install everything or is there a better way to recover the cluster?
Thanks,
hoanghiep

Hi Hoanghiep,
You can not make the UCCX 8.x series second node as the first node, this was supported only on Windows platform (i.e. UCCX 7.x and earlier releases).
If you have taken a valid DRS backup, than yes reinstall the UCCX 8.x first node (with the same details as before like hostnema, ip address, DNS....etc) and than restore this backup.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/configuration/guide/uccx801drs.pdf
Restoring only the Publisher Node in an HA Setup (with Rebuild)
In a high availability (HA) setup , if there is a hard-drive failure or any other critical hardware or
Software failure which needs rebuild of the Publisher ( first ) node, then follow the below procedure to
recover the publisher node to the last backed up state of the publisher. Run the below procedure if you
have a valid backup taken before the failure of the node.
Procedure
Step 1 Perform a fresh installation of the same version of Cisco Unified Contact Center Express (using the same
administrator credentials, network configuration and security password used earlier) on the node prior
to restoring it. 
For more information on installing Cisco Unified Contact Center Express, see the Installing Cisco
Unified Contact Center Express available here:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_installation_guides_list.html
Step 2 Navigate to Cisco Unified Contact Center Administration, select Disaster Recovery System from the
Navigation drop-down list box in the upper-right corner of the Cisco Unified Contact Center Express
Administration window, and click Go.
The Disaster Recovery System Logon window displays.
Step 3 Log in to the Disaster Recovery System by using the same Platform Administrator username and
password that you use to log in to Cisco Unified Operating System Administration.
Step 4 Configure the backup device. For more information, see Managing Backup Devices, page 7.
Step 5 Navigate to Restore > Restore Wizard. The Restore Wizard Step 1 window displays.
Step 6 In the Select Backup Device area, choose the backup device from which to restore.
Step 7 Click Next. The Restore Wizard Step 2 window displays.
Step 8 Choose the backup file that you want to restore.
Note The backup filename indicates the date and time that the system created the backup file.
Step 9 Click Next. The Restore Wizard Step 3 window displays.
Step 10 Select the feature UCCX.
Step 11 Click Next. The Restore Wizard Step 4 window displays,
Step 12 When you get prompted to choose the nodes to restore, choose only the first node (the publisher).
CautionDo not select the second (subscriber) node in this condition as this will result in failure of the restore attempt.
Step 13 To start restoring the data, click Restore.
Note During the restore process, do not perform any tasks with Cisco Unified Contact Center Express
Administration or User Options.
Restoring the first node may take up to several hours based on the size of database that is being restored.
Depending on the size of your database that you choose to restore, the system can require one hour or
more to restore.
Note Based on the requirements, you have the option to either retrieve the existing publisher node data
from the DRS backup to be available on all the nodes in the cluster or retrieve the more recent
data (if available) from the subscriber node to be available in the cluster.
Step 14 Run the following CLI command from the Subscriber node after the restore process is successful (restore
status indicates 100 per cent) to inititate restoring the Publisher node only (with rebuild).
utils uccx setuppubrestore
Step 15 Run the following CLI command on the target node; that is if you want to retrieve the publisher node’s
data, then run this command on the subscriber node, but if you want to retrieve the subscriber node’s data
(which is more up-to-date), then run this command on the publisher node.
utils uccx database forcedatasync
Warning In any case, you must execute this command on either of the nodes after restoring the publisher node.
Step 16 Restart both the nodes and run the following CLI command on the Publisher node to set up replication.
utils uccx dbreplication reset
For more information on restarting, see the Cisco Unified Communications Operating System
Administration Guide available here:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_maintenance_guides_list.html.
CautionIf you have done some configuration or hardware changes while performing fresh installation in Step 1 that might impact the License MAC, then rehost your license again using the license rehosting mechanism before running the CLI command “utils uccx dbreplication reset”. For more information on the licensing rehosting mechanism, see the Installing Cisco Unified Contact Center Express available here:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/prod_installation_guides_list.html
Step 17 Your data gets restored on the publisher node. To view the status of the restore, see the “Viewing the
Restore Status” section on page 19.
Hope this helps.
Anand
Please rate helpful posts !!

Can not deploy a remote storage node

Hello,
I have started successfully two SNA at two node, because we can ping to each other. But when I use admin console to to deploy the first remote storage node, it always shows the error "Connection refused to host: localhost". I use the command line to deploy a remote storage node. There is the same problem.
Dose some one know how to solve it? Thank you advanced.
Here is the error log:
in createPlan: Oracle NoSQL DB 11gR2.1.2.123 oracle.kv.impl.fault.OperationFaultException: Plan 16[Plan-16] finished in state ERROR. Problem during plan execution: Connection refused to host: localhost; nested exception is: java.net.ConnectException: Connection refused
caused by:
oracle.kv.impl.admin.AdminFaultException
Oracle NoSQL DB 11gR2.1.2.123 oracle.kv.impl.fault.OperationFaultException: Plan 16[Plan-16] finished in state ERROR. Problem during plan execution: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused
Oracle NoSQL DB 11gR2.1.2.123 oracle.kv.impl.fault.OperationFaultException: Plan 16[Plan-16] finished in state ERROR. Problem during plan execution: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused oracle.kv.impl.fault.OperationFaultException: Plan 16[Plan-16] finished in state ERROR. Problem during plan execution: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:601)
     at sun.rmi.transport.tcp.TCPChannel.createConnection(TCPChannel.java:198)
     at sun.rmi.transport.tcp.TCPChannel.newConnection(TCPChannel.java:184)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:110)
     at java.rmi.server.RemoteObjectInvocationHandler.invokeRemoteMethod(RemoteObjectInvocationHandler.java:178)
     at java.rmi.server.RemoteObjectInvocationHandler.invoke(RemoteObjectInvocationHandler.java:132)
     at $Proxy8.getSerialVersion(Unknown Source)
     at oracle.kv.impl.util.registry.RemoteAPI.(RemoteAPI.java:32)
     at oracle.kv.impl.sna.StorageNodeAgentAPI.(StorageNodeAgentAPI.java:51)
     at oracle.kv.impl.sna.StorageNodeAgentAPI.wrap(StorageNodeAgentAPI.java:58)
     at oracle.kv.impl.util.registry.RegistryUtils.getStorageNodeAgent(RegistryUtils.java:243)
     at oracle.kv.impl.admin.plan.task.DeploySN.call(DeploySN.java:94)
     at oracle.kv.impl.admin.plan.task.DeploySN.call(DeploySN.java:35)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)
Caused by: java.rmi.ConnectException: Connection refused to host: localhost; nested exception is:
     java.net.ConnectException: Connection refused
     ... 18 more
Caused by: java.net.ConnectException: Connection refused
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:351)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:213)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:200)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.(Socket.java:375)
     at java.net.Socket.(Socket.java:189)
     at sun.rmi.transport.proxy.RMIDirectSocketFactory.createSocket(RMIDirectSocketFactory.java:22)
     at sun.rmi.transport.proxy.RMIMasterSocketFactory.createSocket(RMIMasterSocketFactory.java:128)
     at sun.rmi.transport.tcp.TCPEndpoint.newSocket(TCPEndpoint.java:595)
     ... 17 more
     at oracle.kv.impl.admin.AdminServiceFaultHandler.getThrowException(AdminServiceFaultHandler.java:84)
     at oracle.kv.impl.fault.ProcessFaultHandler.rethrow(ProcessFaultHandler.java:205)
     at oracle.kv.impl.fault.ProcessFaultHandler.execute(ProcessFaultHandler.java:144)
     at oracle.kv.impl.admin.CommandServiceImpl.executePlan(CommandServiceImpl.java:234)
     at oracle.kv.impl.admin.CommandServiceAPI.executePlan(CommandServiceAPI.java:162)
     at oracle.kv.impl.admin.webapp.server.AdminUIServiceImpl.createPlan(AdminUIServiceImpl.java:554)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.google.gwt.user.server.rpc.RPC.invokeAndEncodeResponse(RPC.java:569)
     at com.google.gwt.user.server.rpc.RemoteServiceServlet.processCall(RemoteServiceServlet.java:208)
     at com.google.gwt.user.server.rpc.RemoteServiceServlet.processPost(RemoteServiceServlet.java:248)
     at com.google.gwt.user.server.rpc.AbstractRemoteServiceServlet.doPost(AbstractRemoteServiceServlet.java:62)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at org.eclipse.jetty.servlet.ServletHolder.handle(ServletHolder.java:538)
     at org.eclipse.jetty.servlet.ServletHandler.doHandle(ServletHandler.java:476)
     at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:119)
     at org.eclipse.jetty.security.SecurityHandler.handle(SecurityHandler.java:517)
     at org.eclipse.jetty.server.session.SessionHandler.doHandle(SessionHandler.java:225)
     at org.eclipse.jetty.server.handler.ContextHandler.doHandle(ContextHandler.java:934)
     at org.eclipse.jetty.servlet.ServletHandler.doScope(ServletHandler.java:404)
     at org.eclipse.jetty.server.session.SessionHandler.doScope(SessionHandler.java:183)
     at org.eclipse.jetty.server.handler.ContextHandler.doScope(ContextHandler.java:869)
     at org.eclipse.jetty.server.handler.ScopedHandler.handle(ScopedHandler.java:117)
     at org.eclipse.jetty.server.handler.HandlerWrapper.handle(HandlerWrapper.java:114)
     at org.eclipse.jetty.server.Server.handle(Server.java:341)
     at org.eclipse.jetty.server.HttpConnection.handleRequest(HttpConnection.java:589)
     at org.eclipse.jetty.server.HttpConnection$RequestHandler.content(HttpConnection.java:1065)
     at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:823)
     at org.eclipse.jetty.http.HttpParser.parseAvailable(HttpParser.java:220)
     at org.eclipse.jetty.server.HttpConnection.handle(HttpConnection.java:411)
     at org.eclipse.jetty.io.nio.SelectChannelEndPoint.handle(SelectChannelEndPoint.java:515)
     at org.eclipse.jetty.io.nio.SelectChannelEndPoint$1.run(SelectChannelEndPoint.java:40)
     at org.eclipse.jetty.util.thread.QueuedThreadPool$3.run(QueuedThreadPool.java:529)
     at java.lang.Thread.run(Thread.java:662)
(from Plans.PlanCallback)

920601 wrote:
Thanks, Charles. I use network host name or network host IP address instead of localhost and it well resolved my former problem. I can deploy the remote SN. But there is a new problem when I deploy the store. It looks like that these Replication Node at different SN can not communicate with each other, because of mis-match IP address format.
Note that the node "community01/10.193.128.223" is the first deployed node who holds the administration process, "mi-desktop/127.0.1.1:5011" is another node. I don't understand why the second node uses its loopback adress. Can you help me to find out the solution?
Here is the original error log.
"mi-desktop/127.0.1.1:5011 the address associated with this node, is a loopback address. It conflicts with an existing use, by a different node of the address:community01/10.193.128.223:5011 which is not a loopback address. Such mixing of addresses within a group is not allowed, since the nodes will not be able to communicate with each other."I'm not sure I have any good advice, but I would check your /etc/hosts to see if mi-desktop maps to the loopback address (127.0.0.1). If it does, then you need to use a name that does not map to the loopback.
Charles Lamb

Connection to remote host in NWDS preferences (SAP Instance not reachable)

Hi Experts
I am trying to connect to a SAP Web AS running CE 7.1 with Netweaver Developer Studio as described [here|http://help.sap.com/saphelp_nwce10/helpdata/en/46/9ca4cf4e8b0487e10000000a1553f6/frameset.htm].
The u201Cinstance hostu201D is a remote host. When I try to connect with NWDS 7.1 SPS 5, I get the error message:
SAP Instance is currently not reachable. Check if the SAP Instance number is correct.
However, with NWDS 2004s SPS 13 (installed on the same machine) and message server port 3901, I can see the host in the J2EE view with two green dots (icm, server 0) and one grey dot (debugproxy). NWDS seems to connect (in spite of the grey dot).
Do I have to configure anything else in NWDS (message server port)? Does the debugproxy have to be started?
Thanks for helping!
Kind regards
Bettina

I had the same issue and resolved by adding:
(1) Windows server firewall exception to include "D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe" EXE.
Basically, the windows server on which SAP NetWeaver CE 7.1 was installed, by default, BLOCKS all relevant ports:
50000-50020 & 50100-50120. By add the above (a) rule, the serrver allows any incoming TCP connections used by "D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapstartsrv.exe."
~/Reddy Gurram

UCCX error-remote UCCX node is not reachable

Similar Messages

Maybe you are looking for