UCCX forward to voicemail with additional information

Hi ,
I'm just looking some other precision about the following question .
I will deploy a script with several languages and if no agent are logged or if we are on closed state. then to send the caller to unity voicemail . On this one there is no issues to perform the script .
My question is the following :
As all my agents are sharing the same CSQ and as we are working with skills ( languages skills ) is possible when the UCCX will forward the call to unity voicemail , to send also the language information collected on the menu via the variable to Unity and push this information into the subject as my agent will use voicemail to email to read/listen their voicemail.
I don't see any way how Unity can handle this information as we want to preserve also the caller identification ( if it was not the case , I was may be able to change the caller id in UCCX so that agents can look at the caller id to know which language is the voicemail )
The other way that I can see is to have 2 voicemail depending the languages and in Exchange/Unity to make an automatic forward decision from a voicemail to the other voicemail and try to present the information of forwarding ( ex: FW from Language_A - Caller ID )
Have you already encountered this question ?
Many thanks
Olivier

I would setup a mailbox for each language and send it to the appropriate mailbox based on the language in UCCX.
If you REALLY wanted all of the messages with different languages to show up in one mailbox, you could use Forward Routing Rules in Unity Connection to change the language of the call based on extension number and send it to one mailbox with multiple language greetings recorded. Personally, I would separate them out.

Similar Messages

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

You can make a Book and have a photo on one side and your text description on the other.

Issue in Call Forward to Voicemail

Hi,
I am facing an issue in my cisco telephony while making one phone forward to another phone. Below is the Scenario.
I have 2 phones, A & B , i have forwarded all calls of Phone A to Phone B. So when i call Phone A its gets forwarded and rings on Phone B. And on Phone B forward all Busy internal or external, Forward no answer internal or external to voicemail is checked.
Now the issue is when call on Phone A gets forwarded to Phone B and iff guy on phone B doesnt answer the call, it doesnt go to Phone B voicemail,
Iff the Caller number is Displayed on Phone B it goes to Phone B voicemail.
If DID of phone A is displayed on Phone B it goes to voicemail with a message welcome to Cisco Unity messaging system, without a greeting.
If Local Extension of Phone A is displayed on Phone B, call goes to Phone A voicemail.
I am not able to understand what is happening here.
Please give me some solution. Your help will be highly appreciated.
Regards
Saurabh Kumar

Hello Saurabh,
This is due to:
â€¢Called number
â€¢First redirecting number
â€¢Last redirecting number
Just to add additional input to Chris suggestion, if you do the change of "Use Last (Rather than First) Redirecting Number for Routing Incoming Call" , make sure you understand the full impact in your dial plan deployment, to avoid other possible call routing issues.
DAV_i-D

CUPC 8.6 call forward to voicemail

Hi!
I am using Cisco Personal Communicator (CUPC) 8.6 and also CUCM 8.6. I have CUPC in Deskphone mode, connected to a 6945 IP Phone. I also have Unity Connection where my voicemail box is hosted. When I want to setup call forward to voicemail button in cupc option, it is not working. CUPC will not handle the options I setup seconds before. If I manually put in a call forward to extension number of voice mail pilot call forwarding is working. also call forwarding to my mobile is working.
I checked End User settings, IP Phone is associated to my user, also CTI controll is enabled on device and line settings. user privileges are correct. I tried it on jabber client where it works fine. I also restarted CTI and Callmanager Services on the Servers.
Does anyone has an Idea if this is a general bug in CUPC or does anyone can tell me what the problem might be?
Thanks!
René

Hi,
If at least one of these phones is set to CF to VM then it will, if not, then no.
If none of your phones is set to CF to VM CUCM will not send them to VM, that is expected, if you need to ring, phone A, and if it is not answered to go to phone B, C... and so on, and send the caller to VM after you have reached all of these then use a hunt group, (the pilot can be set to CF to VM if nobody answers), if you need to ring all phones at the same time so someone can pick this up, use a hunt group with a broadcast logic.
If this is for a single user, check 'single number reach' (SNR) or mobility on CUCM.
Bottom line, there is no way to send a caller to VM if none of the phones is set to CF to VM.
HTH
Chris.

Frozen display when call is forward to voicemail IOS 8

After upgrading my iPhone 5s to ios 8 and 8.0.2,I forward incoming calls to my voicemail with a double click on sleep button and when I unlock my device the screen has been frozen, so I have to lock/unlock my iPhone to fix this issue,can anyone help me?

Hi,
If at least one of these phones is set to CF to VM then it will, if not, then no.
If none of your phones is set to CF to VM CUCM will not send them to VM, that is expected, if you need to ring, phone A, and if it is not answered to go to phone B, C... and so on, and send the caller to VM after you have reached all of these then use a hunt group, (the pilot can be set to CF to VM if nobody answers), if you need to ring all phones at the same time so someone can pick this up, use a hunt group with a broadcast logic.
If this is for a single user, check 'single number reach' (SNR) or mobility on CUCM.
Bottom line, there is no way to send a caller to VM if none of the phones is set to CF to VM.
HTH
Chris.

Forward to voicemail prompts to sign in

I apologize for the trivial issue, but I am a Unity Connection newbie trying to fix an issue.
After a call is ignored and forwarded to voicemail, Unity prompts the caller to enter a PIN rather than leave a message for the called user. When the PIN is entered, it takes the caller into their own voicemail.
We also have transfer to voicemail setup when *XXXX is pressed, and that is exhibiting the same issue.
Any help to point me in the right direction is much appriciated :)

Using RTMT Port Monitor it looks like its a direct transfer with no redirect number, hence why its prompting for a PIN. Now I just need to find out why UCXN doesn't see it as a redirect.

CR VS 2013 error: Additional information: Failed to load database information.

We have VS 2008 (V9.0.30729.1 SP1) using .Net 3.5 under Windows Server 2003 R2 Data Center Edition. VS 2008 came with Crystal Reports Version 10.5.3700.0. We developed a little report in a winform to run against Oracle 11gR2 using the OLE DB support in the CR Report Wizard in the VS 2008 IDE. It was a standard report with some code to print the report directly to the printer with out the viewer control. Here is the working code:
Imports System.Data.OleDb
Imports System.Data
Imports System
Imports System.Windows.Forms
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
    Private Sub Form1_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim crReportDocument As New CrystalReport1()
        Dim DataSet1 As DataSet
        Dim adoOleDbConnection As OleDbConnection
        Dim adoOleDbDataAdapter As OleDbDataAdapter
        Dim connectionString As String = ""
        connectionString = "Provider=OraOLEDB.Oracle;"
        connectionString += "Data Source=OURDBNAME;"
        connectionString += "User ID=OURUSERID;Password=OURPSW"
        adoOleDbConnection = New OleDbConnection(connectionString)
        Dim sqlString As String = ""
        sqlString = "SELECT * FROM edi_filing_source_lov where filing_source_code in ('A','E')"
        adoOleDbDataAdapter = New OleDbDataAdapter(sqlString, adoOleDbConnection)
        DataSet1 = New DataSet()
        adoOleDbDataAdapter.Fill(DataSet1, "edi_filing_source_lov")
        crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
        crReportDocument.PrintOptions.PrinterName = "HP_LaserJet_4350_PCL_5e_Info_Tech"
        crReportDocument.Refresh()
        crReportDocument.PrintToPrinter(1, False, 1, 99)
        Me.Close()
    End Sub
End Class
We want to migrate this report to VS 2013. We installed VS 2013 Professional (V12.0.30110.00 Update 1) under Windows Server 2012 R2 Data Center Edition. We downloaded CRforVS_13_0_9 and installed it in VS 2013. We moved the project from VS 2008 and opened it under VS 2013. It looks like it converted OK. When we run it we get the following error:
An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in CrystalDecisions.CrystalReports.Engine.dll
Additional information: Failed to load database information.
Error in File temp_f11eb1be-db98-4d33-800c-4db3b36ab14e {EEB2A9E4-8239-49CB-B016-8CE4F4C7643E}.rpt:
Failed to load database information.
More information: We can step through the wizard in VS 2013 using the standard template and add a report viewer control to the form and point it at the report and run it just fine in the VS 2013 IDE when there is no code in the form1_load event. We feel we have the Oracle.DataAccess.dll for the 11.2.0 client installed and tested correctly on the server and do not feel there is an issue with data base installation. When we add back the code above to the form1_load event and run it we get the error above.
We have the logger set up but nothing gets added to the log files.
We have tried three different ways to set the data source to resolve the error that is occurring at this line of code that is failing but with no luck:
crReportDocument.Database.Tables(0).SetDataSource(DataSet1)
crReportDocument.SetDataSource(DataSet1)
crReportDocument.Database.Tables(0).SetDataSource(DataSet.Tables("edi_filing_source_lov"))
Do you have any other suggestions we could try?
Bruce

Hi Bruce
In my experience, the only reason for the error is that the there is an issue with the dataset and as a back up sort of a thing, the report engine is attempting to connect to the database the report was created off of. To test the dataset with the report, see this wiki on how to.
Also, ensure that you have a look at this KBA.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this!

Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?

mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service.

Can't forward a voicemail on unity 5.0

Hello all,
I have a weird problem i have a unity box 5.0.1 voicemail only
when users wants to forward a voicemail to 1 particular user they can't they get a prompt with the following error
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
the mailbox could not be found
i ran the latest permission wizard and message store config wizard with no luck
there are no errors on the app log
could you please help ?

Agreed - i remember the same thing and just checked out the accounts in question and sure enough. they were not inheriting permissions.
Check the checkbox for ...
Active Directory Account > Security > Advanced and at the bottom it will have a checkbox for inheriting permissions should be checked.
In my scenario i also had to push replication to the site with the Unity server as the changes were made at a different active directory site.

My iphone will no longer recharge. Pasted below is the question I submitted on Yahoo! Answers last night with additional follow up details:

Problem being experienced: My iphone will no longer charge. At the beginning of the problem which started last night, I was getting the error message " Charging is not supported with this accessory." My question, asked last night on Yahoo! Answers with follow up additional information and questions, is pasted below in italics:
I've been getting the error message " Charging is not supported wiyh this accessory". I tried changing to a new cable, and to another connector for the cable. At first it said "charging" even thoufh the actual battery percentage continued to go down. Then it gave that error message again, now it continues to say "unplugged" for its status even though its plugged in. The power outlet itself works fine. What should I do? Its a version 4.2.6 (8E200) and a model MC676LL.
Additional Details
17 hrs ago
The phone is one that's no longer on a calling plan, but I still use it as a secondary
device to access the internet (like a small Ipad that works as such with Wifi at my home and an Apple ID to access the Itunes store), and it has applications that I cant find
in my droid google play store. Its a kind of workhorse for me because of its simplicity
and its ability to access the internet faster than the droid when I'm home. Is it possible that if I let it
discharge to a certain level that it will regain its ability to detect the presence of the
charger? I've been using the square white charger provided by Apple.
1hour ago
The phone is one that's no longer on a calling plan, but I still use it as a secondary
device to access the internet (like a small Ipad), and it has applications that I cant find
in my droid google play store. Its a knd of workhorse for me because of its simplicity
and its ability to access the internet faster than the droid. Is it possible that if I let it
discharge to a certain level that it will regain its ability to detect the presence of the
charger
3 hrs ago
Another thing I'm wondering: Can hitting the "reset all" button under settings correct the problem?

Are you using the charger and cable that came with the phone?
Are you using an unauthorized third party charger?

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Customization of "Positive Pay file with additional parameters" template

Hi,
We've a requirement to customize the eText template of the Positive Pay file with additional parameters report. The setup is done , now the program is picking up the new format. Since the payments involves multilines hierarchy, we are unable to print the data in the hierarchical format. Our requirement is to print a Header with information like BankAccountNumber,Total Amount in Dollars , Total number of lines. And Detail segment with all the infomation like BankNumber, BankAccount Number, Amount, Print 'V' if the check is voided etc. please let me know how to achieve this format in eText.
Thanks
Elan

Did you introduce a new LEVEL for the detail info?
Refer user guide on the syntax of usage.

Basis of choosing EIT, SIT and Addition Information DFF

Hi Gurus,
Can you please enlighten me on the basis of choosing EIT, SIT, Further Infomation or Additional information DFFs for capturing a particular data .
Since all these options provide users to add new segments to capture data specific to customer's business requirement, on what basis we should decide which one should be taken to add the new segment ?
I have a vague idea, hence would like to have a clear understanding with the help of the gurus out here.
Thanks a ton in advance.

Hi,
Please see if these documents/links help.
Note: 210616.1 - SIT vs. EIT - What Is The Difference?
Differences between EIT and SIT in HRMS
http://oracle.anilpassi.com/differences-between-eit-and-sit-in-hrms.html
Oracle Applications Documentation
http://www.oracle.com/technology/documentation/applications.html
Regards,
Hussein

Forwarding a Voicemail

One of my remote users called asking if he could forward a voicemail to another employee.
I did a bit of testing and was able to do this to a co-worker in my office via Option 0, then option 6, then when it asks for "mailbox" entering his phone number (with area code). However, when I tried the same steps in forwarding another test to the remote user who called, it told me that I was entering an invalid mailbox. I also was able to forward a voicemail to the employee who would've been the original receiptiant. That employee is also local.
Thus, I have to assume that the different area codes are the issue here...? The two people I was able to forward a voicemail to share the same area code as I do, while the remote user is several states away.
Is it possible for a user to forward a message to someone in another area code? If so, what should they be putting in for the "Mailbox"?
Also, I should point out that all users involved here are with AT&T and all have a Blackberry.

On my VM setup (basic) I choose option 2 (Send) after entering my password. Then:
Record intro, press #
Enter phone to forward to, press #
Press # again to actually send the message
Press * or hang up.
There are options given to listen to the messages to ensure they are correct - and I may have mixed up the order of entering the ph to forward to and the intro message, but basically you enter each part, followed by the #, then one final # to send it. This is all after pressing 2 at the initial VM prompt.
As elliew said, if this is not allowed, why is the option even there? It would seem odd (and misleading) to allow you to go through all the steps and simply not send it at the end.

UCCX forward to voicemail with additional information

Similar Messages

Maybe you are looking for