UCCX HA Licensing

Hi everyone, i have a question about HA Licensing...
1. I already have an installation of UCCX 7.0 Premium, with the needed Seats.
2. I'm buying ESW and UCSS to upgrade the software to an early version.
3. I'm buying another MCS 7816-I5 to have HA.
4. The question is: ¿What i need to buy to have HA in on my already implementation on UCCX 7.0?
5. ¿Do i need buy CCX-70-PHA-7816I=?
6. ¿Do i need any UCSS for CCX-70-PHA-7816I=?
Thank you!

Hi,
Unfortunately UCCX 7.0 went End of Sale on 18 April 2011 so I do not think that you will be able to obtain the HA license.
The End of Sale notice can be found at the link below:
http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps7236/end_of_life_notice_c51-627280.html
I guess that you could try talking to your Cisco account team to see if they can supply a UCCX 7.0 HA license if you were to buy the equivalent 8.5 license you would need to order CCX-85-A-PHA-LIC ($14,995). Unfortunately you would pay the same as someone buying HA for an MCS 7845 as there is now no distinction between server models.
Another issue that you will have is that the MCS 7816-I5 is not supported by UCCX 7.0 - the page 33 of the compatibility matrix at the link below:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_compatibility/matrix/crscomtx.pdf
One piece of good news is that you do not need to buy additional UCSS for the HA license.
My recomendation would be to move to UCCX 8.5.
Please rate helpful posts

Similar Messages

  • Uccx demo license disappears after reboot

    hi. im trying to install uccx 8.5 in vmware for lab purposes. when i install the demo license included in the DVD, it works out fine. however when i reload the VM and try to log back to uccx, it says that there is no license installed. when i try to reupload the demo license, it generates an error. can anyone help me with this?
    thanks in advance.

    What is the exact UCCX version?
    If possible, share snapshot of error message.
    regds,
    aman

  • UCCX 8 license expiration?

    I just rebooted my single ccx 8.01 Premium server because the repository was unavailable and unable to start. It rebooted and now the repository is available.  However, now everytime I login I get a message that my license grace period of 30 days is expiring.  This server was upgraded to v8 last april/may, so I am far beyond a temp license.  I don't understand why it wants to expire now, no license mac channges that I know of, only the reboot is suspect.
    If you go to the System-Licensing-Display License page, it displays nothing about my license being a temp or ready to expire.  And the CLI show uccx license looks normal too.  Wouldn't this tell me if I was expiring due to the License Mac change?
    admin:show uccx license
    Configured Licenses:
    Package: Cisco Unified CCX Premium
    IVR Port(s): 80
    Cisco Unified CCX Premium Seat(s): 40
    High Availability : Enabled
    Cisco Unified CCX Preview Outbound Dialer: Enabled
    Cisco Unified CCX Maximum Agents: 300
    Command successful.
    Anyone know if this is a cosmetic bug?  Considering upgrading to 8.02 or 8.5 to try and shake it.
    Anyone know how to find the applied .lic files on a Appliance based UCCX?  In CUCM its "file list license *".  No files shown when I try that on UCCX.
    All components are in service and everything is working.  Just a dramatic pop up that tells me I am expiring when I shouldn't be.

    I have also run into this problem when there is an expired temp license still in the system.  Unfortunately you have to open a TAC case to remove old licenses, CET is a locked down tool now.
    Expired licenses should go away or somehow allow removal.

  • UCCX HA license

    I have a single UCCX 10.0  server deployment, I am going to upgrade to high availability, I need to know if the HA deployment needs two HA licenses (CCX-10-PHA-LIC, Qty=2)  or just one?
    Thanks in advance.

    hope this will clear.
    Deployment of HA for inbound voice requires one software license for the HA active server and one for the standby server software. HA is not available for Unified CCX Standard. HA is optional for Unified CCX Enhanced or Premium.

  • UCCX Enhanced License upload issues

    I have a site that is under the gun to finish a UCCX migration from 4.0 to 7.0 We put in for the license upgrade using a PAK but when we load it the system tells us that it is not valid to upgrade using this file from "NONE" Generally that section tells you what files you already have if you add a feature license file.
    We opened a case with TAC but in the meantime we loaded an NFR license file so we could start to configure the system. I then found a PAK for 4-5 to 7 for another site that is being closed. When I got that license file back and tried to run the set-up Wizard again, it tells me the new license is not a valid upgrade from Premium and will be ignored.
    Does this mean I will never be able to get off the NFR license? Am I stuck on this license file even if I get my correct one tomorrow or the next day?
    thanks

    Yes, that is correct that you need the 4.x main system license plus the NEW upgrade license, but the main issue here was "What do I do if my system is running incorrect licensing?" And the answer is, you need to reset the flag for the Web GUI to Fresh Install and you need to delete the references to the existing license files. Both actions are done through the Windows on-board support tool accessed via Start-->Run
    I would not recomend doing this the first time without TAC on the line, but if anyone else wants to provide the command you use to access this tool, feel free. It escapes me at the moment.

  • UCCX upgrade licensing

    I will be doing a UCCX 5.x to 8.02 upgrade. The current 5.x systems is licensed with 33 premium seats. I have the major upgrade 5 to 8 PAK already, but the customer does not have the 5.x premium license file, and it it is not on the server. All UCCX 8's I have done have been new builds. Am I going to need to apply the 5.x licenses after the upgrade? I will be doing the Pre Upgrade Tool converted backup, and the subsequent restore after upgrade. Will that automatically license my agents? Thanks in advance.

    I know I would have to go to licensing to get a copy, but I wanted to know if I had to have them. Ia ssumed I did, and I probably want them anyway even if I don't in case it needed to be reinstalled on teh old release. Thanks.

  • UCCX & CUCM license renew

    Hi All
    One of our customer is running CUCM & UCCX 8.x version. We need to renew their software support con for another year. My query is, what part no we need to renew? Their exact software versions are:
    CUCM: 8.6.2     User Type: Enhanced
    UCCX: 8.5.1     User Type: Premium
    Thanks
    Asif

    Hi Chris
    I don't want to upgrade the version. Just need to renew the user license support. As far my understanding I just need to renew the CON-ESW. Just wonder which part number i need to renew for CUCM 8.6 Enhanced UCL and UCCX 8.5 Premium user license?

  • Medisense license for UCCX

    Good day! I need to order 5 UCCX Premium license. I ordered CCX 10 Premium 5 seat Promo Bundle inside R-UCL-UCM-LIC-K9. Now I need to add 5 audio license for these Premium license. According to Ordering guide I need to order only MCP-10X-AUD-10PACK inside CCX-10-LIC-K9.  But I faced issues when I tried to order MCP-10X-AUD-10PACK - I got a message "A selection of CCX-10-N-P-LIC is required when Premium License is selected. Please adjust the selections. (CE200381)" in spite of ordered CCX 10 Premium 5 seat Promo Bundle. I attached my issue below. Do I need to order something else or is MCP-10X-AUD-10PACK enough for audio recording of operators in my case.

    Demo licenses are included in the DVD or ISO of UCCX.  You can find them in the \DemoLicense\ folder.  There are four demo licenses.  STD, ENH, PRE, and IPIVR.
    If you have an ISO image, you can extract the licenses with archiving software like 7zip or WinRAR.
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/installation/guide/UCCX_BK_U096815B_00_uccx-install-and-upgrade/UCCX_BK_U096815B_00_uccx-install-and-upgrade_appendix_0111.html#UCCX_RF_D8D637D0_00

  • How to activate 5 free UCCX bundle with CUCM in BE6000

    Hi,
    I'm deploying BE 6000 and am currently trying to install licenses.
    I'm wondering how do we get 5 UCCX enhanced licenses that come as promo with the UCCM?
    We ordered HA licenses and an additional 5 enhanced licenses (the goal is to have 10 with the ones from the promo).
    I activated the HA license and the additional 5 enhanced licenses but how do I get the 5 enhanced licenses that come as promo?
    Regards.

    The licenses were delivered electronically.
    With the BE6000 we received some envelopes with licenses for the VCS and UC hypervisor.
    In the electronic licenses I see the line CCX-10-5E under R-CBE6K-K9 but we didn't get a separate PAK for the 5 free CCX licenses so that we can activate it.
    Regards.

  • Logged-in Resources stat not the same as license usage

    Hello,
    If I look in Real-Time Reporting, the number of logged-in resources is 29.  If I go on the CLI and run show uccx cad license usage, it's telling me that there are 26 licences in use.
    What's the reason for the difference?
    I've tried counting the supervisors, but that doesn't give me the difference.

    Hi Jemima,
    Could you please cross check wih the UCCX's Real Time reporting ,Overall Cisco Unified Contact Center Express Stats report.
    To access the Overall Unified CCX Stats report, choose              Reports                   > Overall Cisco Unified Contact Center Express                     Stats from the Application Reporting menu bar.
    Number of resources currently logged in.
    This will give the accurate results.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • UCCX 7.0 CAD integrated browser issue

    Dear Networkers,
    We have UCCX 7.0 installed.
    When openeing the CAD Desktop Workfow Admin > select the default workflow> CAD Agent > User Interface
    We can't find the "Browser Setup" tab so that we can enable the integrated browser !
    For CAD-BE we could find the tab, but for CAD Agent we could not !
    It's really strange !
    Can you please advise ?
    thanks in advance.

    Hi ,
    Could you attach the screenshot of the same? What license you have for UCCX?
    Integrated multitabbed browser comes only with UCCX Premium licensing package.
    Please refer the "Table 1.Feature Content for Cisco Agent Desktop Software Packages" in the below link.
    http://www.cisco.com/en/US/prod/collateral/voicesw/custcosw/ps5693/ps427/data_sheet_c78-584241.html
    Each Standard seat license provides for concurrent operation of:
    • Cisco IP Phone Agent
    • Cisco Supervisor Desktop
    • Cisco Desktop Administrator*
    • Cisco Desktop Work Flow Administrator*
    Each Enhanced or Premium seat license provides for concurrent operation of:
    • Cisco Agent Desktop, Cisco IP Phone Agent or Cisco Agent Desktop - Browser Edition
    • Cisco Supervisor Desktop
    • Cisco Desktop Administrator*
    • Cisco Desktop Work Flow Administrator*
    *Only one administrator can view or edit data in it at any one time.
    Hope it helps.
    Anand
    Please rate helpful posts !!

  • Upgrade UCCX to Ver.8

    Does anyone know of any links to documentation for upgrading UCCX from ver. 7 to ver. 8?
    It's my understanding that Ver. 8 is Linux based and there are tools to convert the DB to this format.
    Has anyone completed this migration and do you have any tips of tricks?
    Any info would be helpful..
    Thanks...

    Hi Joe,
    You need to use PUT (PreUpgradeTool) to take backup from UCCX version 7. This tool facilitates the
    process of backing up data from your CRS or Unified CCX cluster.
    PUT software is available for download in the Cisco download area.
    Please read the "Upgrading to Unified CCX 8.0(1)" section from the following document for complete detail:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/uccx801ug.pdf
    You will require an upgrade license during the restoration of data from 7.x to 8.x and this licenses requires PAK key.
    You can obtain upgrade license from http://www.cisco.com/go/license or mail the information to [email protected]
    You may find the following blog useful for UCCX licensing:
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/others/blog/2010/10/29/uccx-8-licensing
    Please rate this post if you find it useful.
    Regards,
    Saurabh

  • UCCX 7 to 8 Upgrade - SFTP

    I have a customer with 2 UCCX 7 servers and getting 2 new servers for UCCX 8.
    The upgrade process calls for SFTP. Where could we get this? Could we install this say on the standby UCCX 7 server?
    Then from UCCX 8 server (publisher) I could install from DVD and do a restore.
    Please clarify if there is a way to do this more efficiently.
    Also during a basic UCCX 8 install do we need to use the PAK and get a basic initial license (node locked license)?
    Thanks for the help

    Hello Rajan,
    I've used FreeFTP with no problem. Also, OpenSSH has been recommended lately. I would suggest installing it on a different PC, because you'll probably want to install UCCX 8 with the same IP address and hostname, so you'll need to shut down UCCX 7. Additionaly you can check this thread:
    https://learningnetwork.cisco.com/thread/13630?tstart=-41
    You install UCCX 8 from the DVD. When you start the Initial Setup Configuration on the UCCX 8.0, you choose 'Upgrade from a previous UCCX release' and there you point to the PreUpgradeTool (PUT) file on the SFTP server. Here's the upgrade guide:
    www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/uccx801ug.pdf
    For the licensing part, I would suggest you checking this blog:
    https://supportforums.cisco.com/community/netpro/collaboration-voice-video/others/blog/2010/10/29/uccx-8-licensing
    HTH
    Pablo

  • UCCX 8.0(2) - As know if the total number is CTI port is sufficient

    Hi Guys,
    My Customer have solution with CUCM 8.6.2 and UCCX 8.0.2. He is ask for me if the total license for CTI ports that are today is sufficient. I read the documentation that I found, but, not stay clear. The below the actual configuration:
    CUCM
    configured 524 CTI port
    UCCX
    Configured Licenses:
    Package: Cisco Unified CCX Premium
    IVR Port(s): 60
    Cisco Unified CCX Premium Seat(s): 30
    High Availability : Enabled
    Cisco Unified CCX Preview Outbound Dialer: Enabled
    Cisco Unified CCX Maximum Agents: 300
    Are there one way of verify if this quantity is sufficient?
    Thanks,
    Wilson

    Hi Anas,
    This solution have:
    06 CUCM Servers: 04 (01 Publisher, 01 TFTP Server, 02 Subscribers)  in the Central Office and 02 (Subscriber) in remote Office
    04 UCCX Servers: 02 Servers with function ACD (01 Publisher and 01 Subscriber)  and 02 Servers with function IVR (01 Publisher and 01 Subscriber)
    About the Gateway the Customer have:
    In the Central Office have 04 E1´s for inbound calls (01 Gateway)  and anoter Gateways with 04 E1´S for outbound calls.
    Thanks,
    Wilson

  • Maximum number of licenses reached error message on CCX agent's desktop

    Intermittently CAD agents or supervisor are getting the error message "Maximum number of licenses reached". I have checked at the same time of error, still there are license available but users are getting this error message. Currently we have 50 seats licenses.I have noticed this problem reoccur when it's reaching the login agents between 40-50 agents. Is there any threshold value, we can modify to get rid of this error message.

    We had a very similar issue last week. For us we had a couple of sessions that were stuck that didn't end properly even after a restart (probably because we have a HA cluster).
    We have 35 seat licenses activated but only 33 agents could log in. Ended up raising a TAC case and doing the following -
    1) From the command line run show uccx cad license usage to list the current license status - a list of IPs that are currently claiming a license.
    2) Run the same command when the contact center is closed and see who is still claiming a license. Here I traced the computers down and made sure the Agent or Supervisor application was closed (forcibly if necessary).
    3) Restart the Cisco Desktop License and Resource Manager Service on all nodes in the HA cluster to clear any stuck sessions.
    Remember though that anyone logged into the Supervisor application also uses a seat license!

Maybe you are looking for